api client.py

@@ -0,0 +1,56 @@
+# This is an example of how to connect to and use the Bitmessage API.
+# See https://bitmessage.org/wiki/API_Reference
+
+import xmlrpclib
+import json
+
+api = xmlrpclib.ServerProxy("http://bradley:password@localhost:8442/")
+
+print 'Let\'s test the API first.'
+inputstr1 = "hello"
+inputstr2 = "world"
+print api.helloWorld(inputstr1, inputstr2)
+print api.add(2,3)
+
+print 'Let\'s set the status bar message.'
+print api.statusBar("new status bar message")
+
+print 'Let\'s list our addresses:'
+print api.listAddresses()
+
+print 'Let\'s list our address again, but this time let\'s parse the json data into a Python data structure:'
+jsonAddresses = json.loads(api.listAddresses())
+print jsonAddresses
+print 'Now that we have our address data in a nice Python data structure, let\'s look at the first address (index 0) and print its label:'
+print jsonAddresses['addresses'][0]['label']
+
+print 'Uncomment the next two lines to create a new random address.'
+#addressLabel = 'new address label'.encode('base64')
+#print api.createRandomAddress(addressLabel)
+
+print 'Uncomment these next four lines to create new deterministic addresses.'
+#passphrase = 'asdfasdfqwer'.encode('base64')
+#jsonDeterministicAddresses = api.createDeterministicAddresses(passphrase, 2, 2, 1, False)
+#print jsonDeterministicAddresses
+#print json.loads(jsonDeterministicAddresses)
+
+print 'Let\'s now print all of our inbox messages:'
+print api.getAllInboxMessages()
+inboxMessages = json.loads(api.getAllInboxMessages())
+print inboxMessages
+
+print 'Uncomment this next line to decode the actual message data in the first message:'
+#print inboxMessages['inboxMessages'][0]['message'].decode('base64')
+
+print 'Uncomment this next line in the code to delete a message'
+#print api.trashMessage('584e5826947242a82cb883c8b39ac4a14959f14c228c0fbe6399f73e2cba5b59')
+
+"""print 'Now let\'s send a message. The example addresses are invalid. You will have to put your own in.'
+subject = 'subject!'.encode('base64')
+message = 'Hello, this is the message'.encode('base64')
+print api.sendMessage('BM-oqmocYzqK74y3qSRi8c3YqyenyEKiMyLB', 'BM-omzGU4MtzSUCQhMNm5kPR6UNrJ4Q4zeFe', subject,message)"""
+
+"""print 'Now let\'s send a broadcast. The example address is invalid; you will have to put your own in.'
+subject = 'subject within broadcast'.encode('base64')
+message = 'Hello, this is the message within a broadcast.'.encode('base64')
+print api.sendBroadcast('BM-onf6V1RELPgeNN6xw9yhpAiNiRexSRD4e', subject,message)"""

bitmessagemain.py

@@ -6,7 +6,7 @@
 
 #Right now, PyBitmessage only support connecting to stream 1. It doesn't yet contain logic to expand into further streams.
 
-softwareVersion = '0.2.6'
+softwareVersion = '0.2.7'
 verbose = 2
 maximumAgeOfAnObjectThatIAmWillingToAccept = 216000 #Equals two days and 12 hours.
 lengthOfTimeToLeaveObjectsInInventory = 237600 #Equals two days and 18 hours. This should be longer than maximumAgeOfAnObjectThatIAmWillingToAccept so that we don't process messages twice.
@@ -58,6 +58,12 @@ import highlevelcrypto
 from pyelliptic.openssl import OpenSSL
 import ctypes
 from pyelliptic import arithmetic
+#The next 5 are used for the API
+import uuid
+import Cookie
+from SimpleXMLRPCServer import *
+import json
+from subprocess import call #used when the API must execute an outside program
 
 #For each stream to which we connect, one outgoingSynSender thread will exist and will create 8 connections with peers.
 class outgoingSynSender(QThread):
@@ -646,6 +652,15 @@ class receiveDataThread(QThread):
                 sqlLock.release()
                 self.emit(SIGNAL("displayNewInboxMessage(PyQt_PyObject,PyQt_PyObject,PyQt_PyObject,PyQt_PyObject,PyQt_PyObject)"),self.inventoryHash,toAddress,fromAddress,subject,body)
 
+                #If we are behaving as an API then we might need to run an outside command to let some program know that a new message has arrived.
+                if safeConfigGetBoolean('bitmessagesettings','apienabled'):
+                    try:
+                        apiNotifyPath = config.get('bitmessagesettings','apinotifypath')
+                    except:
+                        apiNotifyPath = ''
+                    if apiNotifyPath != '':
+                        call([apiNotifyPath, "newBroadcast"])
+
             #Display timing data
             printLock.acquire()
             print 'Time spent processing this interesting broadcast:', time.time()- self.messageProcessingStartTime
@@ -1183,12 +1198,17 @@ class receiveDataThread(QThread):
                     sqlLock.release()
                     self.emit(SIGNAL("displayNewInboxMessage(PyQt_PyObject,PyQt_PyObject,PyQt_PyObject,PyQt_PyObject,PyQt_PyObject)"),self.inventoryHash,toAddress,fromAddress,subject,body)
 
+                #If we are behaving as an API then we might need to run an outside command to let some program know that a new message has arrived.
+                if safeConfigGetBoolean('bitmessagesettings','apienabled'):
+                    try:
+                        apiNotifyPath = config.get('bitmessagesettings','apinotifypath')
+                    except:
+                        apiNotifyPath = ''
+                    if apiNotifyPath != '':
+                        call([apiNotifyPath, "newMessage"])
+
                 #Let us now check and see whether our receiving address is behaving as a mailing list
-                try:
+                if safeConfigGetBoolean(toAddress,'mailinglist'):
-                    isMailingList = config.getboolean(toAddress, 'mailinglist')
-                except:
-                    isMailingList = False
-                if isMailingList:
                     try:
                         mailingListName = config.get(toAddress, 'mailinglistname')
                     except:
@@ -1208,8 +1228,8 @@ class receiveDataThread(QThread):
                     sqlReturnQueue.get()
                     sqlLock.release()
 
-                    workerQueue.put(('sendbroadcast',(fromAddress,subject,message)))
                     self.emit(SIGNAL("displayNewSentMessage(PyQt_PyObject,PyQt_PyObject,PyQt_PyObject,PyQt_PyObject,PyQt_PyObject,PyQt_PyObject)"),toAddress,'[Broadcast subscribers]',fromAddress,subject,message,ackdata)
+                    workerQueue.put(('sendbroadcast',(fromAddress,subject,message)))
 
             #Now let's consider sending the acknowledgement. We'll need to make sure that our client will properly process the ackData; if the packet is malformed, we could clear out self.data and an attacker could use that behavior to determine that we were capable of decoding this message.
             ackDataValidThusFar = True
@@ -1730,7 +1750,8 @@ class receiveDataThread(QThread):
             #print 'Within recaddr(): IP', recaddrIP, ', Port', recaddrPort, ', i', i
             hostFromAddrMessage = socket.inet_ntoa(self.data[52+lengthOfNumberOfAddresses+(34*i):56+lengthOfNumberOfAddresses+(34*i)])
             #print 'hostFromAddrMessage', hostFromAddrMessage
-            if hostFromAddrMessage == '127.0.0.1':
+            if self.data[52+lengthOfNumberOfAddresses+(34*i)] == '\x7F':
+                print 'Ignoring IP address in loopback range:', hostFromAddrMessage
                 continue
             timeSomeoneElseReceivedMessageFromThisNode, = unpack('>I',self.data[24+lengthOfNumberOfAddresses+(34*i):28+lengthOfNumberOfAddresses+(34*i)]) #This is the 'time' value in the received addr message.
             if recaddrStream not in knownNodes: #knownNodes is a dictionary of dictionaries with one outer dictionary for each stream. If the outer stream dictionary doesn't exist yet then we must make it.
@@ -2208,6 +2229,15 @@ def calculateTestnetAddressFromPubkey(pubkey):
     base58encoded = arithmetic.changebase(binaryBitcoinAddress,256,58)
     return "1"*numberOfZeroBytesOnBinaryBitcoinAddress + base58encoded
 
+def safeConfigGetBoolean(section,field):
+        try:
+            if config.getboolean(section,field):
+                return True
+            else:
+                return False
+        except:
+            return False
+
 def lookupAppdataFolder():
     APPNAME = "PyBitmessage"
     from os import path, environ
@@ -2453,6 +2483,10 @@ class singleWorker(QThread):
                     self.sendMsg(toRipe)
                 else:
                     print 'We don\'t need this pub key. We didn\'t ask for it. Pubkey hash:', toRipe.encode('hex')
+            else:
+                printLock.acquire()
+                sys.stderr.write('Probable programming error: The command sent to the workerThread is weird. It is: %s\n' % command)
+                printLock.release()
 
             workerQueue.task_done()
 
@@ -2522,8 +2556,12 @@ class singleWorker(QThread):
             status,addressVersionNumber,streamNumber,ripe = decodeAddress(fromaddress)
             if addressVersionNumber == 2:
                 #We need to convert our private keys to public keys in order to include them.
-                privSigningKeyBase58 = config.get(fromaddress, 'privsigningkey')
+                try:
-                privEncryptionKeyBase58 = config.get(fromaddress, 'privencryptionkey')
+                    privSigningKeyBase58 = config.get(fromaddress, 'privsigningkey')
+                    privEncryptionKeyBase58 = config.get(fromaddress, 'privencryptionkey')
+                except:
+                    self.emit(SIGNAL("updateSentItemStatusByAckdata(PyQt_PyObject,PyQt_PyObject)"),ackdata,'Error! Could not find sender address (your address) in the keys.dat file.')
+                    continue
 
                 privSigningKeyHex = decodeWalletImportFormat(privSigningKeyBase58).encode('hex')
                 privEncryptionKeyHex = decodeWalletImportFormat(privEncryptionKeyBase58).encode('hex')
@@ -2551,6 +2589,7 @@ class singleWorker(QThread):
                 trialValue = 99999999999999999999
                 target = 2**64 / ((len(payload)+payloadLengthExtraBytes+8) * averageProofOfWorkNonceTrialsPerByte)
                 print '(For broadcast message) Doing proof of work...'
+                self.emit(SIGNAL("updateSentItemStatusByAckdata(PyQt_PyObject,PyQt_PyObject)"),ackdata,'Doing work necessary to send broadcast...')
                 initialHash = hashlib.sha512(payload).digest()
                 while trialValue > target:
                     nonce += 1
@@ -2671,8 +2710,12 @@ class singleWorker(QThread):
                 payload += '\x00\x00\x00\x01' #Bitfield of features and behaviors that can be expected from me. (See https://bitmessage.org/wiki/Protocol_specification#Pubkey_bitfield_features  )
 
                 #We need to convert our private keys to public keys in order to include them.
-                privSigningKeyBase58 = config.get(fromaddress, 'privsigningkey')
+                try:
-                privEncryptionKeyBase58 = config.get(fromaddress, 'privencryptionkey')
+                    privSigningKeyBase58 = config.get(fromaddress, 'privsigningkey')
+                    privEncryptionKeyBase58 = config.get(fromaddress, 'privencryptionkey')
+                except:
+                    self.emit(SIGNAL("updateSentItemStatusByAckdata(PyQt_PyObject,PyQt_PyObject)"),ackdata,'Error! Could not find sender address (your address) in the keys.dat file.')
+                    continue
 
                 privSigningKeyHex = decodeWalletImportFormat(privSigningKeyBase58).encode('hex')
                 privEncryptionKeyHex = decodeWalletImportFormat(privEncryptionKeyBase58).encode('hex')
@@ -2805,7 +2848,10 @@ class singleWorker(QThread):
                 nonce += 1
                 trialValue, = unpack('>Q',hashlib.sha512(hashlib.sha512(pack('>Q',nonce) + initialHash).digest()).digest()[0:8])
             print '(For msg message) Found proof of work', trialValue, 'Nonce:', nonce
-            print 'POW took', int(time.time()-powStartTime), 'seconds.', nonce/(time.time()-powStartTime), 'nonce trials per second.'
+            try:
+                print 'POW took', int(time.time()-powStartTime), 'seconds.', nonce/(time.time()-powStartTime), 'nonce trials per second.'
+            except:
+                pass
             payload = pack('>Q',nonce) + payload
 
             inventoryHash = calculateInventoryHash(payload)
@@ -2880,7 +2926,10 @@ class singleWorker(QThread):
             trialValue, = unpack('>Q',hashlib.sha512(hashlib.sha512(pack('>Q',nonce) + initialHash).digest()).digest()[0:8])
         printLock.acquire()
         print '(For ack message) Found proof of work', trialValue, 'Nonce:', nonce
-        print 'POW took', int(time.time()-powStartTime), 'seconds.', nonce/(time.time()-powStartTime), 'nonce trials per second.'
+        try:
+            print 'POW took', int(time.time()-powStartTime), 'seconds.', nonce/(time.time()-powStartTime), 'nonce trials per second.'
+        except:
+            pass
         printLock.release()
         payload = pack('>Q',nonce) + payload
         headerData = '\xe9\xbe\xb4\xd9' #magic bits, slighly different from Bitcoin's magic bits.
@@ -2960,6 +3009,9 @@ class addressGenerator(QThread):
                 with open(appdata + 'keys.dat', 'wb') as configfile:
                     config.write(configfile)
                 
+                #It may be the case that this address is being generated as a result of a call to the API. Let us put the result in the necessary queue. 
+                apiAddressGeneratorReturnQueue.put(address)
+
                 self.emit(SIGNAL("updateStatusBar(PyQt_PyObject)"),'Done generating address. Doing work necessary to broadcast it...')
                 self.emit(SIGNAL("writeNewAddressToTable(PyQt_PyObject,PyQt_PyObject,PyQt_PyObject)"),self.label,address,str(self.streamNumber))
                 reloadMyAddressHashes()
@@ -2970,6 +3022,8 @@ class addressGenerator(QThread):
                 self.emit(SIGNAL("updateStatusBar(PyQt_PyObject)"),statusbar)
                 signingKeyNonce = 0
                 encryptionKeyNonce = 1
+                listOfNewAddressesToSendOutThroughTheAPI = [] #We fill out this list no matter what although we only need it if we end up passing the info to the API.
+
                 for i in range(self.numberOfAddressesToMake):
                     #This next section is a little bit strange. We're going to generate keys over and over until we
                     #find one that has a RIPEMD hash that starts with either \x00 or \x00\x00. Then when we pack them
@@ -3028,8 +3082,11 @@ class addressGenerator(QThread):
                             config.write(configfile)
 
                         self.emit(SIGNAL("writeNewAddressToTable(PyQt_PyObject,PyQt_PyObject,PyQt_PyObject)"),self.label,address,str(self.streamNumber))
+                        listOfNewAddressesToSendOutThroughTheAPI.append(address)
                     except:
                         print address,'already exists. Not adding it again.'
+                #It may be the case that this address is being generated as a result of a call to the API. Let us put the result in the necessary queue. 
+                apiAddressGeneratorReturnQueue.put(listOfNewAddressesToSendOutThroughTheAPI)
                 self.emit(SIGNAL("updateStatusBar(PyQt_PyObject)"),'Done generating address')
                 reloadMyAddressHashes()
 
@@ -3094,6 +3151,446 @@ class addressGenerator(QThread):
         OpenSSL.EC_KEY_free(k)
         return mb.raw
 
+#This is one of several classes that constitute the API
+#This class was written by Vaibhav Bhatia
+#http://code.activestate.com/recipes/501148-xmlrpc-serverclient-which-does-cookie-handling-and/
+class APIUserManagement:
+    def __init__(self):
+        #self.d = shelve.open('machines.shv')
+        self.d = {}
+
+        # register a list of valid machine names/email id's
+        validconfig = {config.get('bitmessagesettings', 'apiusername'):config.get('bitmessagesettings', 'apipassword')}
+        for k,v in validconfig.items():
+            self.generateUuid(k,v)
+
+    def generateUuid(self, email_id, machine_name):
+        """ return a uuid which uniquely identifies machinename and email id """
+        uuidstr = None
+
+        if machine_name not in self.d:
+            myNamespace = uuid.uuid3(uuid.NAMESPACE_URL, machine_name)
+            uuidstr = str(uuid.uuid3(myNamespace, email_id))
+
+            self.d[machine_name] = (machine_name, uuidstr, email_id)
+            self.d[uuidstr] = (machine_name, uuidstr ,email_id)
+        else:
+            (machine_name, uuidstr, email_id) = self.d[machine_name]
+
+        return uuidstr
+
+    def checkMe(self, id):
+        if id in self.d:
+            return self.d[id]
+        return (None,None,None)
+
+    #def __del__(self):
+    #    self.d.close()
+
+#This is used only for the API
+def APIAuthenticate(id):
+    sk = APIUserManagement()
+    return sk.checkMe(id)
+
+#This is one of several classes that constitute the API
+#This class was written by Vaibhav Bhatia
+#http://code.activestate.com/recipes/501148-xmlrpc-serverclient-which-does-cookie-handling-and/
+class MySimpleXMLRPCRequestHandler(SimpleXMLRPCRequestHandler):
+    def setCookie(self, key=None ,value=None):
+        if key :
+            c1 = Cookie.SimpleCookie()
+            c1[key] = value
+            cinfo = self.getDefaultCinfo()
+            for attr,val in cinfo.items():
+                c1[key][attr] = val
+
+            if c1 not in self.cookies:
+                self.cookies.append(c1)
+
+    def getDefaultCinfo(self):
+        cinfo = {}
+
+        cinfo['expires'] = 30*24*60*60
+        cinfo['path'] = '/RPC2/'
+        cinfo['comment'] = 'comment!'
+        cinfo['domain'] = '.localhost.local'
+        cinfo['max-age'] = 30*24*60*60
+        cinfo['secure'] = ''
+        cinfo['version']= 1
+
+        return cinfo
+
+    def do_POST(self):
+        #Handles the HTTP POST request.
+        #Attempts to interpret all HTTP POST requests as XML-RPC calls,
+        #which are forwarded to the server's _dispatch method for handling.
+
+        #Note: this method is the same as in SimpleXMLRPCRequestHandler,
+        #just hacked to handle cookies
+
+        # Check that the path is legal
+        if not self.is_rpc_path_valid():
+            self.report_404()
+            return
+
+        try:
+            # Get arguments by reading body of request.
+            # We read this in chunks to avoid straining
+            # socket.read(); around the 10 or 15Mb mark, some platforms
+            # begin to have problems (bug #792570).
+            max_chunk_size = 10*1024*1024
+            size_remaining = int(self.headers["content-length"])
+            L = []
+            while size_remaining:
+                chunk_size = min(size_remaining, max_chunk_size)
+                L.append(self.rfile.read(chunk_size))
+                size_remaining -= len(L[-1])
+            data = ''.join(L)
+
+            # In previous versions of SimpleXMLRPCServer, _dispatch
+            # could be overridden in this class, instead of in
+            # SimpleXMLRPCDispatcher. To maintain backwards compatibility,
+            # check to see if a subclass implements _dispatch and dispatch
+            # using that method if present.
+            response = self.server._marshaled_dispatch(
+                    data, getattr(self, '_dispatch', None)
+                )
+        except: # This should only happen if the module is buggy
+            # internal error, report as HTTP server error
+            self.send_response(500)
+            self.end_headers()
+        else:
+            # got a valid XML RPC response
+            self.send_response(200)
+            self.send_header("Content-type", "text/xml")
+            self.send_header("Content-length", str(len(response)))
+
+            # HACK :start -> sends cookies here
+            if self.cookies:
+                for cookie in self.cookies:
+                    self.send_header('Set-Cookie',cookie.output(header=''))
+            # HACK :end
+
+            self.end_headers()
+            self.wfile.write(response)
+
+            # shut down the connection
+            self.wfile.flush()
+            self.connection.shutdown(1)
+
+
+    def APIAuthenticateClient(self):
+        validuser = False
+
+        if self.headers.has_key('Authorization'):
+            # handle Basic authentication
+            (enctype, encstr) =  self.headers.get('Authorization').split()
+            (emailid, machine_name) = encstr.decode('base64').split(':')
+            (auth_machine, auth_uuidstr, auth_email) = APIAuthenticate(machine_name)
+
+            if emailid == auth_email:
+                print "Authenticated"
+                # set authentication cookies on client machines
+                validuser = True
+                if auth_uuidstr:
+                    self.setCookie('UUID',auth_uuidstr)
+
+        elif self.headers.has_key('UUID'):
+            # handle cookie based authentication
+            id =  self.headers.get('UUID')
+            (auth_machine, auth_uuidstr, auth_email) = APIAuthenticate(id)
+
+            if auth_uuidstr :
+                print "Authenticated"
+                validuser = True
+        else:
+            print 'Authentication failed'
+            time.sleep(2)
+
+        return validuser
+
+    def _dispatch(self, method, params):
+        self.cookies = []
+
+        validuser = self.APIAuthenticateClient()
+        if not validuser:
+            time.sleep(2)
+            return "RPC Username or password incorrect."
+        # handle request
+        if method == 'helloWorld':
+            (a,b) = params
+            return a+'-'+b
+        elif method == 'add':
+            (a,b) = params
+            return a+b
+        elif method == 'statusBar':
+            message, = params
+            apiSignalQueue.put(('updateStatusBar',message))
+        elif method == 'listAddresses':
+            data = '{"addresses":['
+            configSections = config.sections()
+            for addressInKeysFile in configSections:
+                if addressInKeysFile <> 'bitmessagesettings':
+                    status,addressVersionNumber,streamNumber,hash = decodeAddress(addressInKeysFile)
+                    data
+                    if len(data) > 20:
+                        data += ','
+                    data += json.dumps({'label':config.get(addressInKeysFile,'label'),'address':addressInKeysFile,'stream':streamNumber,'enabled':config.getboolean(addressInKeysFile,'enabled')},indent=4, separators=(',', ': '))
+            data += ']}'
+            return data
+        elif method == 'createRandomAddress':
+            if len(params) == 0:
+                return 'API Error 0000: I need parameters!'
+            elif len(params) == 1:
+                label, = params
+                eighteenByteRipe = False
+            elif len(params) == 2:
+                label, eighteenByteRipe = params
+            label = label.decode('base64')
+            apiAddressGeneratorReturnQueue.queue.clear()
+            apiSignalQueue.put(('createRandomAddress',(label, eighteenByteRipe))) #params should be a twopul which equals (eighteenByteRipe, label)
+            return apiAddressGeneratorReturnQueue.get()
+        elif method == 'createDeterministicAddresses':
+            if len(params) == 0:
+                return 'API Error 0000: I need parameters!'
+            elif len(params) == 1:
+                passphrase, = params
+                numberOfAddresses = 1
+                addressVersionNumber = 0
+                streamNumber = 0
+                eighteenByteRipe = False
+            elif len(params) == 2:
+                passphrase, numberOfAddresses = params
+                addressVersionNumber = 0
+                streamNumber = 0
+                eighteenByteRipe = False
+            elif len(params) == 3:
+                passphrase, numberOfAddresses, addressVersionNumber = params
+                streamNumber = 0
+                eighteenByteRipe = False
+            elif len(params) == 4:
+                passphrase, numberOfAddresses, addressVersionNumber, streamNumber = params
+                eighteenByteRipe = False
+            elif len(params) == 5:
+                passphrase, numberOfAddresses, addressVersionNumber, streamNumber, eighteenByteRipe = params
+            if len(passphrase) == 0:
+                return 'API Error 0001: the specified passphrase is blank.'
+            passphrase = passphrase.decode('base64')
+            if addressVersionNumber == 0: #0 means "just use the proper addressVersionNumber"
+                addressVersionNumber == 2
+            if addressVersionNumber != 2:
+                return 'API Error 0002: the address version number currently must be 2 (or 0 which means auto-select). Others aren\'t supported.'
+            if streamNumber == 0: #0 means "just use the most available stream"
+                streamNumber = 1
+            if streamNumber != 1:
+                return 'API Error 0003: the stream number must be 1 (or 0 which means auto-select). Others aren\'t supported.'
+            if numberOfAddresses == 0:
+                return 'API Error 0004: Why would you ask me to generate 0 addresses for you?'
+            if numberOfAddresses > 9999:
+                return 'API Error 0005: You have (accidentially?) specified too many addresses to make. Maximum 9999. This check only exists to prevent mischief; if you really want to create more addresses than this, contact the Bitmessage developers and we can modify the check or you can do it yourself by searching the source code for this message.'
+            apiAddressGeneratorReturnQueue.queue.clear()
+            print 'about to send numberOfAddresses', numberOfAddresses
+            apiSignalQueue.put(('createDeterministicAddresses',(passphrase, numberOfAddresses, addressVersionNumber, streamNumber, eighteenByteRipe)))
+            data = '{"addresses":['
+            queueReturn = apiAddressGeneratorReturnQueue.get()
+            for item in queueReturn:
+                if len(data) > 20:
+                    data += ','
+                data += "\""+item+ "\""
+            data += ']}'
+            return data
+        elif method == 'getAllInboxMessages':
+            sqlLock.acquire()
+            sqlSubmitQueue.put('''SELECT msgid, toaddress, fromaddress, subject, received, message FROM inbox where folder='inbox' ORDER BY received''')
+            sqlSubmitQueue.put('')
+            queryreturn = sqlReturnQueue.get()
+            sqlLock.release()
+            data = '{"inboxMessages":['
+            for row in queryreturn:
+                msgid, toAddress, fromAddress, subject, received, message, = row
+                if len(data) > 25:
+                    data += ','
+                data += json.dumps({'msgid':msgid.encode('hex'),'toAddress':toAddress,'fromAddress':fromAddress,'subject':subject.encode('base64'),'message':message.encode('base64'),'encodingType':2,'receivedTime':received},indent=4, separators=(',', ': '))
+            data += ']}'
+            return data
+        elif method == 'trashMessage':
+            if len(params) == 0:
+                return 'API Error 0000: I need parameters!'
+            msgid = params[0].decode('hex')
+            t = (msgid,)
+            sqlLock.acquire()
+            sqlSubmitQueue.put('''UPDATE inbox SET folder='trash' WHERE msgid=?''')
+            sqlSubmitQueue.put(t)
+            sqlReturnQueue.get()
+            sqlLock.release()
+            apiSignalQueue.put(('updateStatusBar','Per API: Trashed message (assuming message existed). UI not updated.'))
+            return 'Trashed message (assuming message existed). UI not updated. To double check, run getAllInboxMessages to see that the message disappeared, or restart Bitmessage and look in the normal Bitmessage GUI.'
+        elif method == 'sendMessage':
+            if len(params) == 0:
+                return 'API Error 0000: I need parameters!'
+            elif len(params) == 4:
+                toAddress, fromAddress, subject, message = params
+                encodingType = 2
+            elif len(params) == 5:
+                toAddress, fromAddress, subject, message, encodingType = params
+            if encodingType != 2:
+                return 'API Error 0006: The encoding type must be 2 because that is the only one this program currently supports.'
+            subject = subject.decode('base64')
+            message = message.decode('base64')
+            status,addressVersionNumber,streamNumber,toRipe = decodeAddress(toAddress)
+            if status <> 'success':
+                printLock.acquire()
+                print 'API Error 0007: Could not decode address:', toAddress, ':', status
+                printLock.release()
+                if status == 'checksumfailed':
+                    return 'API Error 0008: Checksum failed for address: ' + toAddress
+                if status == 'invalidcharacters':
+                    return 'API Error 0009: Invalid characters in address: '+ toAddress
+                if status == 'versiontoohigh':
+                    return 'API Error 0010: Address version number too high (or zero) in address: ' + toAddress
+            if addressVersionNumber != 2:
+                return 'API Error 0011: the address version number currently must be 2. Others aren\'t supported. Check the toAddress.'
+            if streamNumber != 1:
+                return 'API Error 0012: the stream number must be 1. Others aren\'t supported. Check the toAddress.'
+            status,addressVersionNumber,streamNumber,fromRipe = decodeAddress(fromAddress)
+            if status <> 'success':
+                printLock.acquire()
+                print 'API Error 0007: Could not decode address:', fromAddress, ':', status
+                printLock.release()
+                if status == 'checksumfailed':
+                    return 'API Error 0008: Checksum failed for address: ' + fromAddress
+                if status == 'invalidcharacters':
+                    return 'API Error 0009: Invalid characters in address: '+ fromAddress
+                if status == 'versiontoohigh':
+                    return 'API Error 0010: Address version number too high (or zero) in address: ' + fromAddress
+            if addressVersionNumber != 2:
+                return 'API Error 0011: the address version number currently must be 2. Others aren\'t supported. Check the fromAddress.'
+            if streamNumber != 1:
+                return 'API Error 0012: the stream number must be 1. Others aren\'t supported. Check the fromAddress.'
+            toAddress = addBMIfNotPresent(toAddress)
+            fromAddress = addBMIfNotPresent(fromAddress)
+            try:
+                fromAddressEnabled = config.getboolean(fromAddress,'enabled')
+            except:
+                return 'API Error 0013: could not find your fromAddress in the keys.dat file.'
+            if not fromAddressEnabled:
+                return 'API Error 0014: your fromAddress is disabled. Cannot send.'
+
+            ackdata = OpenSSL.rand(32)
+            sqlLock.acquire()
+            t = ('',toAddress,toRipe,fromAddress,subject,message,ackdata,int(time.time()),'findingpubkey',1,1,'sent')
+            sqlSubmitQueue.put('''INSERT INTO sent VALUES (?,?,?,?,?,?,?,?,?,?,?,?)''')
+            sqlSubmitQueue.put(t)
+            sqlReturnQueue.get()
+            sqlLock.release()
+            
+            toLabel = ''
+            t = (toAddress,)
+            sqlLock.acquire()
+            sqlSubmitQueue.put('''select label from addressbook where address=?''')
+            sqlSubmitQueue.put(t)
+            queryreturn = sqlReturnQueue.get()
+            sqlLock.release()
+            if queryreturn <> []:
+                for row in queryreturn:
+                    toLabel, = row
+            apiSignalQueue.put(('displayNewSentMessage',(toAddress,toLabel,fromAddress,subject,message,ackdata)))
+
+            workerQueue.put(('sendmessage',toAddress))
+            
+            return ackdata.encode('hex')
+        
+        elif method == 'sendBroadcast':
+            if len(params) == 0:
+                return 'API Error 0000: I need parameters!'
+            if len(params) == 3:
+                fromAddress, subject, message = params
+                encodingType = 2
+            elif len(params) == 4:
+                fromAddress, subject, message, encodingType = params
+            if encodingType != 2:
+                return 'API Error 0006: The encoding type must be 2 because that is the only one this program currently supports.'
+            subject = subject.decode('base64')
+            message = message.decode('base64')
+
+            status,addressVersionNumber,streamNumber,fromRipe = decodeAddress(fromAddress)
+            if status <> 'success':
+                printLock.acquire()
+                print 'API Error 0007: Could not decode address:', fromAddress, ':', status
+                printLock.release()
+                if status == 'checksumfailed':
+                    return 'API Error 0008: Checksum failed for address: ' + fromAddress
+                if status == 'invalidcharacters':
+                    return 'API Error 0009: Invalid characters in address: '+ fromAddress
+                if status == 'versiontoohigh':
+                    return 'API Error 0010: Address version number too high (or zero) in address: ' + fromAddress
+            if addressVersionNumber != 2:
+                return 'API Error 0011: the address version number currently must be 2. Others aren\'t supported. Check the fromAddress.'
+            if streamNumber != 1:
+                return 'API Error 0012: the stream number must be 1. Others aren\'t supported. Check the fromAddress.'
+            fromAddress = addBMIfNotPresent(fromAddress)
+            try:
+                fromAddressEnabled = config.getboolean(fromAddress,'enabled')
+            except:
+                return 'API Error 0013: could not find your fromAddress in the keys.dat file.'
+            ackdata = OpenSSL.rand(32)
+            toAddress = '[Broadcast subscribers]'
+            ripe = ''
+
+            sqlLock.acquire()
+            t = ('',toAddress,ripe,fromAddress,subject,message,ackdata,int(time.time()),'broadcastpending',1,1,'sent')
+            sqlSubmitQueue.put('''INSERT INTO sent VALUES (?,?,?,?,?,?,?,?,?,?,?,?)''')
+            sqlSubmitQueue.put(t)
+            sqlReturnQueue.get()
+            sqlLock.release()
+
+            toLabel = '[Broadcast subscribers]'
+            apiSignalQueue.put(('displayNewSentMessage',(toAddress,toLabel,fromAddress,subject,message,ackdata)))
+
+            workerQueue.put(('sendbroadcast',(fromAddress,subject,message)))
+
+            return ackdata.encode('hex')         
+
+        else:
+            return 'Invalid Method: %s'%method
+
+#This thread, of which there is only one, runs the API.
+class singleAPI(QThread):
+    def __init__(self, parent = None):
+        QThread.__init__(self, parent)
+
+    def run(self):
+        se = SimpleXMLRPCServer((config.get('bitmessagesettings', 'apiinterface'),config.getint('bitmessagesettings', 'apiport')), MySimpleXMLRPCRequestHandler, True, True)
+        se.register_introspection_functions()
+        se.serve_forever()
+
+#The MySimpleXMLRPCRequestHandler class cannot emit signals (or at least I don't know how) because it is not a QT thread. It therefore puts data in a queue which this thread monitors and emits the signals on its behalf.
+class singleAPISignalHandler(QThread):
+    def __init__(self, parent = None):
+        QThread.__init__(self, parent)
+
+    def run(self):
+        while True:
+            command, data = apiSignalQueue.get()
+            if command == 'updateStatusBar':
+                self.emit(SIGNAL("updateStatusBar(PyQt_PyObject)"),data)
+            elif command == 'createRandomAddress':
+                label, eighteenByteRipe = data
+                streamNumberForAddress = 1
+                self.addressGenerator = addressGenerator()
+                self.addressGenerator.setup(2,streamNumberForAddress,label,1,"",eighteenByteRipe)
+                self.emit(SIGNAL("passAddressGeneratorObjectThrough(PyQt_PyObject)"),self.addressGenerator)
+                self.addressGenerator.start()
+            elif command == 'createDeterministicAddresses':
+                passphrase, numberOfAddresses, addressVersionNumber, streamNumber, eighteenByteRipe = data
+                self.addressGenerator = addressGenerator()
+                self.addressGenerator.setup(addressVersionNumber,streamNumber,'unused API address',numberOfAddresses,passphrase,eighteenByteRipe)
+                self.emit(SIGNAL("passAddressGeneratorObjectThrough(PyQt_PyObject)"),self.addressGenerator)
+                self.addressGenerator.start()
+            elif command == 'displayNewSentMessage':
+                toAddress,toLabel,fromAddress,subject,message,ackdata = data
+                self.emit(SIGNAL("displayNewSentMessage(PyQt_PyObject,PyQt_PyObject,PyQt_PyObject,PyQt_PyObject,PyQt_PyObject,PyQt_PyObject)"),toAddress,toLabel,fromAddress,subject,message,ackdata)
+
 class iconGlossaryDialog(QtGui.QDialog):
     def __init__(self,parent):
         QtGui.QWidget.__init__(self, parent)
@@ -3200,11 +3697,7 @@ class SpecialAddressBehaviorDialog(QtGui.QDialog):
         self.parent = parent
         currentRow = parent.ui.tableWidgetYourIdentities.currentRow()
         addressAtCurrentRow = str(parent.ui.tableWidgetYourIdentities.item(currentRow,1).text())
-        try:
+        if safeConfigGetBoolean(addressAtCurrentRow,'mailinglist'):
-            isMailingList = config.getboolean(addressAtCurrentRow, 'mailinglist')
-        except:
-            isMailingList = False
-        if isMailingList:
             self.ui.radioButtonBehaviorMailingList.click()
         else:
             self.ui.radioButtonBehaveNormalAddress.click()
@@ -3425,11 +3918,8 @@ class MyForm(QtGui.QMainWindow):
                 newItem.setFlags( QtCore.Qt.ItemIsSelectable |  QtCore.Qt.ItemIsEnabled )
                 if not isEnabled:
                     newItem.setTextColor(QtGui.QColor(128,128,128))
-                try:
+                if safeConfigGetBoolean(addressInKeysFile,'mailinglist'):
-                    if config.getboolean(addressInKeysFile,'mailinglist'):
+                    newItem.setTextColor(QtGui.QColor(137,04,177))#magenta
-                        newItem.setTextColor(QtGui.QColor(137,04,177))#magenta
-                except:
-                    pass #The 'mailinglist'
                 self.ui.tableWidgetYourIdentities.setItem(0, 1, newItem)
                 newItem = QtGui.QTableWidgetItem(str(addressStream(addressInKeysFile)))
                 newItem.setFlags( QtCore.Qt.ItemIsSelectable |  QtCore.Qt.ItemIsEnabled )
@@ -3478,11 +3968,8 @@ class MyForm(QtGui.QMainWindow):
             newItem =  QtGui.QTableWidgetItem(unicode(toLabel,'utf-8'))
             newItem.setFlags( QtCore.Qt.ItemIsSelectable |  QtCore.Qt.ItemIsEnabled )
             newItem.setData(Qt.UserRole,str(toAddress))
-            try:
+            if safeConfigGetBoolean(toAddress,'mailinglist'):
-                if config.getboolean(toAddress,'mailinglist'):
+                newItem.setTextColor(QtGui.QColor(137,04,177))
-                    newItem.setTextColor(QtGui.QColor(137,04,177))
-            except:
-                pass #the 'mailinglist' setting was not found for this address.
             self.ui.tableWidgetInbox.setItem(0,0,newItem)
             if fromLabel == '':
                 newItem =  QtGui.QTableWidgetItem(unicode(fromAddress,'utf-8'))
@@ -3647,6 +4134,25 @@ class MyForm(QtGui.QMainWindow):
         QtCore.QObject.connect(self.workerThread, QtCore.SIGNAL("updateSentItemStatusByAckdata(PyQt_PyObject,PyQt_PyObject)"), self.updateSentItemStatusByAckdata)
         QtCore.QObject.connect(self.workerThread, QtCore.SIGNAL("updateStatusBar(PyQt_PyObject)"), self.updateStatusBar)
 
+        self.singleAPIThread = singleAPI()
+        self.singleAPIThread.start()
+
+        if safeConfigGetBoolean('bitmessagesettings','apienabled'):
+            try:
+                apiNotifyPath = config.get('bitmessagesettings','apinotifypath')
+            except:
+                apiNotifyPath = ''
+            if apiNotifyPath != '':
+                printLock.acquire()
+                print 'Trying to call', apiNotifyPath
+                printLock.release()
+                call([apiNotifyPath, "startingUp"])
+            self.singleAPISignalHandlerThread = singleAPISignalHandler()
+            self.singleAPISignalHandlerThread.start()
+            QtCore.QObject.connect(self.singleAPISignalHandlerThread, QtCore.SIGNAL("updateStatusBar(PyQt_PyObject)"), self.updateStatusBar)
+            QtCore.QObject.connect(self.singleAPISignalHandlerThread, QtCore.SIGNAL("passAddressGeneratorObjectThrough(PyQt_PyObject)"), self.connectObjectToAddressGeneratorSignals)
+            QtCore.QObject.connect(self.singleAPISignalHandlerThread, QtCore.SIGNAL("displayNewSentMessage(PyQt_PyObject,PyQt_PyObject,PyQt_PyObject,PyQt_PyObject,PyQt_PyObject,PyQt_PyObject)"), self.displayNewSentMessage)
+
     def click_actionManageKeys(self):
         if 'darwin' in sys.platform or 'linux' in sys.platform:
             if appdata == '':
@@ -3814,12 +4320,9 @@ class MyForm(QtGui.QMainWindow):
                 toLabel = toAddress
             self.ui.tableWidgetInbox.item(i,0).setText(unicode(toLabel,'utf-8'))
             #Set the color according to whether it is the address of a mailing list or not.
-            try:
+            if safeConfigGetBoolean(toAddress,'mailinglist'):
-                if config.getboolean(toAddress,'mailinglist'):
+                self.ui.tableWidgetInbox.item(i,0).setTextColor(QtGui.QColor(137,04,177))
-                    self.ui.tableWidgetInbox.item(i,0).setTextColor(QtGui.QColor(137,04,177))
+            else:
-                else:
-                    self.ui.tableWidgetInbox.item(i,0).setTextColor(QtGui.QColor(0,0,0))
-            except:
                 self.ui.tableWidgetInbox.item(i,0).setTextColor(QtGui.QColor(0,0,0))
 
     def rerenderSentFromLabels(self):
@@ -3901,14 +4404,16 @@ class MyForm(QtGui.QMainWindow):
                         sqlSubmitQueue.put(t)
                         sqlReturnQueue.get()
                         sqlLock.release()
-                        workerQueue.put(('sendmessage',toAddress))
 
-                        try:
+
+                        
+
+                        """try:
                             fromLabel = config.get(fromAddress, 'label')
                         except:
                             fromLabel = ''
                         if fromLabel == '':
-                            fromLabel = fromAddress
+                            fromLabel = fromAddress"""
 
                         toLabel = ''
 
@@ -3922,7 +4427,10 @@ class MyForm(QtGui.QMainWindow):
                             for row in queryreturn:
                                 toLabel, = row
                         
-                        self.ui.tableWidgetSent.insertRow(0)
+                        self.displayNewSentMessage(toAddress,toLabel,fromAddress, subject, message, ackdata)
+                        workerQueue.put(('sendmessage',toAddress))
+
+                        """self.ui.tableWidgetSent.insertRow(0)
                         if toLabel == '':
                             newItem =  QtGui.QTableWidgetItem(unicode(toAddress,'utf-8'))
                         else:
@@ -3944,7 +4452,7 @@ class MyForm(QtGui.QMainWindow):
                         newItem.setData(33,int(time.time()))
                         self.ui.tableWidgetSent.setItem(0,3,newItem)
 
-                        self.ui.textEditSentMessage.setText(self.ui.tableWidgetSent.item(0,2).data(Qt.UserRole).toPyObject())
+                        self.ui.textEditSentMessage.setText(self.ui.tableWidgetSent.item(0,2).data(Qt.UserRole).toPyObject())"""
 
                         self.ui.comboBoxSendFrom.setCurrentIndex(0)
                         self.ui.labelFrom.setText('')
@@ -3997,7 +4505,7 @@ class MyForm(QtGui.QMainWindow):
                 newItem.setData(Qt.UserRole,unicode(message,'utf-8)'))
                 self.ui.tableWidgetSent.setItem(0,2,newItem)
                 #newItem =  QtGui.QTableWidgetItem('Doing work necessary to send broadcast...'+strftime(config.get('bitmessagesettings', 'timeformat'),localtime(int(time.time()))))
-                newItem =  myTableWidgetItem('Doing work necessary to send broadcast...')
+                newItem =  myTableWidgetItem('Work is queued.')
                 newItem.setData(Qt.UserRole,QByteArray(ackdata))
                 newItem.setData(33,int(time.time()))
                 self.ui.tableWidgetSent.setItem(0,3,newItem)
@@ -4071,6 +4579,11 @@ class MyForm(QtGui.QMainWindow):
         QtCore.QObject.connect(object, QtCore.SIGNAL("incrementNumberOfBroadcastsProcessed()"), self.incrementNumberOfBroadcastsProcessed)
         QtCore.QObject.connect(object, QtCore.SIGNAL("setStatusIcon(PyQt_PyObject)"), self.setStatusIcon)
 
+    #This function exists because of the API. The API thread starts an address generator thread and must somehow connect the address generator's signals to the QApplication thread. This function is used to connect the slots and signals.
+    def connectObjectToAddressGeneratorSignals(self,object):
+        QtCore.QObject.connect(object, SIGNAL("writeNewAddressToTable(PyQt_PyObject,PyQt_PyObject,PyQt_PyObject)"), self.writeNewAddressToTable)
+        QtCore.QObject.connect(object, QtCore.SIGNAL("updateStatusBar(PyQt_PyObject)"), self.updateStatusBar)
+
     #This function is called by the processmsg function when that function receives a message to an address that is acting as a pseudo-mailing-list. The message will be broadcast out. This function puts the message on the 'Sent' tab.
     def displayNewSentMessage(self,toAddress,toLabel,fromAddress,subject,message,ackdata):
         try:
@@ -4081,7 +4594,10 @@ class MyForm(QtGui.QMainWindow):
             fromLabel = fromAddress
 
         self.ui.tableWidgetSent.insertRow(0)
-        newItem =  QtGui.QTableWidgetItem(unicode(toLabel,'utf-8'))
+        if toLabel == '':
+            newItem =  QtGui.QTableWidgetItem(unicode(toAddress,'utf-8'))
+        else:
+            newItem =  QtGui.QTableWidgetItem(unicode(toLabel,'utf-8'))
         newItem.setData(Qt.UserRole,str(toAddress))
         self.ui.tableWidgetSent.setItem(0,0,newItem)
         if fromLabel == '':
@@ -4094,7 +4610,7 @@ class MyForm(QtGui.QMainWindow):
         newItem.setData(Qt.UserRole,unicode(message,'utf-8)'))
         self.ui.tableWidgetSent.setItem(0,2,newItem)
         #newItem =  QtGui.QTableWidgetItem('Doing work necessary to send broadcast...'+strftime(config.get('bitmessagesettings', 'timeformat'),localtime(int(time.time()))))
-        newItem =  myTableWidgetItem('Doing work necessary to send broadcast...')
+        newItem =  myTableWidgetItem('Work is queued. '+strftime(config.get('bitmessagesettings', 'timeformat'),localtime(int(time.time()))))
         newItem.setData(Qt.UserRole,QByteArray(ackdata))
         newItem.setData(33,int(time.time()))
         self.ui.tableWidgetSent.setItem(0,3,newItem)
@@ -4141,11 +4657,8 @@ class MyForm(QtGui.QMainWindow):
         #msgid, toaddress, fromaddress, subject, received, message = row
         newItem =  QtGui.QTableWidgetItem(unicode(toLabel,'utf-8'))
         newItem.setData(Qt.UserRole,str(toAddress))
-        try:
+        if safeConfigGetBoolean(str(toAddress),'mailinglist'):
-            if config.getboolean(str(toAddress),'mailinglist'):
+            newItem.setTextColor(QtGui.QColor(137,04,177))
-                newItem.setTextColor(QtGui.QColor(137,04,177))
-        except:
-            pass #the 'mailinglist' setting was not found for this address.
         self.ui.tableWidgetInbox.insertRow(0)
         self.ui.tableWidgetInbox.setItem(0,0,newItem)
 
@@ -4709,11 +5222,8 @@ class MyForm(QtGui.QMainWindow):
         self.ui.tableWidgetYourIdentities.item(currentRow,0).setTextColor(QtGui.QColor(0,0,0))
         self.ui.tableWidgetYourIdentities.item(currentRow,1).setTextColor(QtGui.QColor(0,0,0))
         self.ui.tableWidgetYourIdentities.item(currentRow,2).setTextColor(QtGui.QColor(0,0,0))
-        try:
+        if safeConfigGetBoolean(addressAtCurrentRow,'mailinglist'):
-            if config.getboolean(addressAtCurrentRow,'mailinglist'):
+            self.ui.tableWidgetYourIdentities.item(currentRow,1).setTextColor(QtGui.QColor(137,04,177))
-                self.ui.tableWidgetYourIdentities.item(currentRow,1).setTextColor(QtGui.QColor(137,04,177))
-        except:
-            pass
         reloadMyAddressHashes()
     def on_action_YourIdentitiesDisable(self):
         currentRow = self.ui.tableWidgetYourIdentities.currentRow()
@@ -4722,12 +5232,8 @@ class MyForm(QtGui.QMainWindow):
         self.ui.tableWidgetYourIdentities.item(currentRow,0).setTextColor(QtGui.QColor(128,128,128))
         self.ui.tableWidgetYourIdentities.item(currentRow,1).setTextColor(QtGui.QColor(128,128,128))
         self.ui.tableWidgetYourIdentities.item(currentRow,2).setTextColor(QtGui.QColor(128,128,128))
-        try:
+        if safeConfigGetBoolean(addressAtCurrentRow,'mailinglist'):
-            if config.getboolean(addressAtCurrentRow,'mailinglist'):
+            self.ui.tableWidgetYourIdentities.item(currentRow,1).setTextColor(QtGui.QColor(137,04,177))
-                self.ui.tableWidgetYourIdentities.item(currentRow,1).setTextColor(QtGui.QColor(137,04,177))
-        except:
-            pass
-
         with open(appdata + 'keys.dat', 'wb') as configfile:
             config.write(configfile)
         reloadMyAddressHashes()
@@ -4848,6 +5354,8 @@ eightBytesOfRandomDataUsedToDetectConnectionsToSelf = pack('>Q',random.randrange
 connectedHostsList = {} #List of hosts to which we are connected. Used to guarantee that the outgoingSynSender thread won't connect to the same remote node twice.
 neededPubkeys = {}
 successfullyDecryptMessageTimings = [] #A list of the amounts of time it took to successfully decrypt msg messages
+apiSignalQueue = Queue.Queue() #The singleAPI thread uses this queue to pass messages to a QT thread which can emit signals to do things like display a message in the UI.
+apiAddressGeneratorReturnQueue = Queue.Queue() #The address generator thread uses this queue to get information back to the API thread.
 
 #These constants are not at the top because if changed they will cause particularly unexpected behavior: You won't be able to either send or receive messages because the proof of work you do (or demand) won't match that done or demanded by others. Don't change them!
 averageProofOfWorkNonceTrialsPerByte = 320 #The amount of work that should be performed (and demanded) per byte of the payload. Double this number to double the work.

messages.dat reader.py

@@ -90,8 +90,8 @@ def takeSentMessagesOutOfTrash():
 
 #takeInboxMessagesOutOfTrash()
 #takeSentMessagesOutOfTrash()
-#readInbox()
+readInbox()
-readSent()
+#readSent()
 #readPubkeys()
 #readSubscriptions()
 #readInventory()

rsa/__init__.py

@@ -1,45 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-"""RSA module
-
-Module for calculating large primes, and RSA encryption, decryption, signing
-and verification. Includes generating public and private keys.
-
-WARNING: this implementation does not use random padding, compression of the
-cleartext input to prevent repetitions, or other common security improvements.
-Use with care.
-
-If you want to have a more secure implementation, use the functions from the
-``rsa.pkcs1`` module.
-
-"""
-
-__author__ = "Sybren Stuvel, Barry Mead and Yesudeep Mangalapilly"
-__date__ = "2012-06-17"
-__version__ = '3.1.1'
-
-from rsa.key import newkeys, PrivateKey, PublicKey
-from rsa.pkcs1 import encrypt, decrypt, sign, verify, DecryptionError, \
-    VerificationError
-
-# Do doctest if we're run directly
-if __name__ == "__main__":
-    import doctest
-    doctest.testmod()
-
-__all__ = ["newkeys", "encrypt", "decrypt", "sign", "verify", 'PublicKey',
-    'PrivateKey', 'DecryptionError', 'VerificationError']
-

rsa/_compat.py

@@ -1,160 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-"""Python compatibility wrappers."""
-
-
-from __future__ import absolute_import
-
-import sys
-from struct import pack
-
-try:
-    MAX_INT = sys.maxsize
-except AttributeError:
-    MAX_INT = sys.maxint
-
-MAX_INT64 = (1 << 63) - 1
-MAX_INT32 = (1 << 31) - 1
-MAX_INT16 = (1 << 15) - 1
-
-# Determine the word size of the processor.
-if MAX_INT == MAX_INT64:
-    # 64-bit processor.
-    MACHINE_WORD_SIZE = 64
-elif MAX_INT == MAX_INT32:
-    # 32-bit processor.
-    MACHINE_WORD_SIZE = 32
-else:
-    # Else we just assume 64-bit processor keeping up with modern times.
-    MACHINE_WORD_SIZE = 64
-
-
-try:
-    # < Python3
-    unicode_type = unicode
-    have_python3 = False
-except NameError:
-    # Python3.
-    unicode_type = str
-    have_python3 = True
-
-# Fake byte literals.
-if str is unicode_type:
-    def byte_literal(s):
-        return s.encode('latin1')
-else:
-    def byte_literal(s):
-        return s
-
-# ``long`` is no more. Do type detection using this instead.
-try:
-    integer_types = (int, long)
-except NameError:
-    integer_types = (int,)
-
-b = byte_literal
-
-try:
-    # Python 2.6 or higher.
-    bytes_type = bytes
-except NameError:
-    # Python 2.5
-    bytes_type = str
-
-
-# To avoid calling b() multiple times in tight loops.
-ZERO_BYTE = b('\x00')
-EMPTY_BYTE = b('')
-
-
-def is_bytes(obj):
-    """
-    Determines whether the given value is a byte string.
-
-    :param obj:
-        The value to test.
-    :returns:
-        ``True`` if ``value`` is a byte string; ``False`` otherwise.
-    """
-    return isinstance(obj, bytes_type)
-
-
-def is_integer(obj):
-    """
-    Determines whether the given value is an integer.
-
-    :param obj:
-        The value to test.
-    :returns:
-        ``True`` if ``value`` is an integer; ``False`` otherwise.
-    """
-    return isinstance(obj, integer_types)
-
-
-def byte(num):
-    """
-    Converts a number between 0 and 255 (both inclusive) to a base-256 (byte)
-    representation.
-
-    Use it as a replacement for ``chr`` where you are expecting a byte
-    because this will work on all current versions of Python::
-
-    :param num:
-        An unsigned integer between 0 and 255 (both inclusive).
-    :returns:
-        A single byte.
-    """
-    return pack("B", num)
-
-
-def get_word_alignment(num, force_arch=64,
-                       _machine_word_size=MACHINE_WORD_SIZE):
-    """
-    Returns alignment details for the given number based on the platform
-    Python is running on.
-
-    :param num:
-        Unsigned integral number.
-    :param force_arch:
-        If you don't want to use 64-bit unsigned chunks, set this to
-        anything other than 64. 32-bit chunks will be preferred then.
-        Default 64 will be used when on a 64-bit machine.
-    :param _machine_word_size:
-        (Internal) The machine word size used for alignment.
-    :returns:
-        4-tuple::
-
-            (word_bits, word_bytes,
-             max_uint, packing_format_type)
-    """
-    max_uint64 = 0xffffffffffffffff
-    max_uint32 = 0xffffffff
-    max_uint16 = 0xffff
-    max_uint8 = 0xff
-
-    if force_arch == 64 and _machine_word_size >= 64 and num > max_uint32:
-        # 64-bit unsigned integer.
-        return 64, 8, max_uint64, "Q"
-    elif num > max_uint16:
-        # 32-bit unsigned integer
-        return 32, 4, max_uint32, "L"
-    elif num > max_uint8:
-        # 16-bit unsigned integer.
-        return 16, 2, max_uint16, "H"
-    else:
-        # 8-bit unsigned integer.
-        return 8, 1, max_uint8, "B"

rsa/_version133.py

@@ -1,442 +0,0 @@
-"""RSA module
-pri = k[1]                               	//Private part of keys d,p,q
-
-Module for calculating large primes, and RSA encryption, decryption,
-signing and verification. Includes generating public and private keys.
-
-WARNING: this code implements the mathematics of RSA. It is not suitable for
-real-world secure cryptography purposes. It has not been reviewed by a security
-expert. It does not include padding of data. There are many ways in which the
-output of this module, when used without any modification, can be sucessfully
-attacked.
-"""
-
-__author__ = "Sybren Stuvel, Marloes de Boer and Ivo Tamboer"
-__date__ = "2010-02-05"
-__version__ = '1.3.3'
-
-# NOTE: Python's modulo can return negative numbers. We compensate for
-# this behaviour using the abs() function
-
-from cPickle import dumps, loads
-import base64
-import math
-import os
-import random
-import sys
-import types
-import zlib
-
-from rsa._compat import byte
-
-# Display a warning that this insecure version is imported.
-import warnings
-warnings.warn('Insecure version of the RSA module is imported as %s, be careful'
-        % __name__)
-
-def gcd(p, q):
-    """Returns the greatest common divisor of p and q
-
-
-    >>> gcd(42, 6)
-    6
-    """
-    if p<q: return gcd(q, p)
-    if q == 0: return p
-    return gcd(q, abs(p%q))
-
-def bytes2int(bytes):
-    """Converts a list of bytes or a string to an integer
-
-    >>> (128*256 + 64)*256 + + 15
-    8405007
-    >>> l = [128, 64, 15]
-    >>> bytes2int(l)
-    8405007
-    """
-
-    if not (type(bytes) is types.ListType or type(bytes) is types.StringType):
-        raise TypeError("You must pass a string or a list")
-
-    # Convert byte stream to integer
-    integer = 0
-    for byte in bytes:
-        integer *= 256
-        if type(byte) is types.StringType: byte = ord(byte)
-        integer += byte
-
-    return integer
-
-def int2bytes(number):
-    """Converts a number to a string of bytes
-    
-    >>> bytes2int(int2bytes(123456789))
-    123456789
-    """
-
-    if not (type(number) is types.LongType or type(number) is types.IntType):
-        raise TypeError("You must pass a long or an int")
-
-    string = ""
-
-    while number > 0:
-        string = "%s%s" % (byte(number & 0xFF), string)
-        number /= 256
-    
-    return string
-
-def fast_exponentiation(a, p, n):
-    """Calculates r = a^p mod n
-    """
-    result = a % n
-    remainders = []
-    while p != 1:
-        remainders.append(p & 1)
-        p = p >> 1
-    while remainders:
-        rem = remainders.pop()
-        result = ((a ** rem) * result ** 2) % n
-    return result
-
-def read_random_int(nbits):
-    """Reads a random integer of approximately nbits bits rounded up
-    to whole bytes"""
-
-    nbytes = ceil(nbits/8.)
-    randomdata = os.urandom(nbytes)
-    return bytes2int(randomdata)
-
-def ceil(x):
-    """ceil(x) -> int(math.ceil(x))"""
-
-    return int(math.ceil(x))
-    
-def randint(minvalue, maxvalue):
-    """Returns a random integer x with minvalue <= x <= maxvalue"""
-
-    # Safety - get a lot of random data even if the range is fairly
-    # small
-    min_nbits = 32
-
-    # The range of the random numbers we need to generate
-    range = maxvalue - minvalue
-
-    # Which is this number of bytes
-    rangebytes = ceil(math.log(range, 2) / 8.)
-
-    # Convert to bits, but make sure it's always at least min_nbits*2
-    rangebits = max(rangebytes * 8, min_nbits * 2)
-    
-    # Take a random number of bits between min_nbits and rangebits
-    nbits = random.randint(min_nbits, rangebits)
-    
-    return (read_random_int(nbits) % range) + minvalue
-
-def fermat_little_theorem(p):
-    """Returns 1 if p may be prime, and something else if p definitely
-    is not prime"""
-
-    a = randint(1, p-1)
-    return fast_exponentiation(a, p-1, p)
-
-def jacobi(a, b):
-    """Calculates the value of the Jacobi symbol (a/b)
-    """
-
-    if a % b == 0:
-        return 0
-    result = 1
-    while a > 1:
-        if a & 1:
-            if ((a-1)*(b-1) >> 2) & 1:
-                result = -result
-            b, a = a, b % a
-        else:
-            if ((b ** 2 - 1) >> 3) & 1:
-                result = -result
-            a = a >> 1
-    return result
-
-def jacobi_witness(x, n):
-    """Returns False if n is an Euler pseudo-prime with base x, and
-    True otherwise.
-    """
-
-    j = jacobi(x, n) % n
-    f = fast_exponentiation(x, (n-1)/2, n)
-
-    if j == f: return False
-    return True
-
-def randomized_primality_testing(n, k):
-    """Calculates whether n is composite (which is always correct) or
-    prime (which is incorrect with error probability 2**-k)
-
-    Returns False if the number if composite, and True if it's
-    probably prime.
-    """
-
-    q = 0.5     # Property of the jacobi_witness function
-
-    # t = int(math.ceil(k / math.log(1/q, 2)))
-    t = ceil(k / math.log(1/q, 2))
-    for i in range(t+1):
-        x = randint(1, n-1)
-        if jacobi_witness(x, n): return False
-    
-    return True
-
-def is_prime(number):
-    """Returns True if the number is prime, and False otherwise.
-
-    >>> is_prime(42)
-    0
-    >>> is_prime(41)
-    1
-    """
-
-    """
-    if not fermat_little_theorem(number) == 1:
-        # Not prime, according to Fermat's little theorem
-        return False
-    """
-
-    if randomized_primality_testing(number, 5):
-        # Prime, according to Jacobi
-        return True
-    
-    # Not prime
-    return False
-
-    
-def getprime(nbits):
-    """Returns a prime number of max. 'math.ceil(nbits/8)*8' bits. In
-    other words: nbits is rounded up to whole bytes.
-
-    >>> p = getprime(8)
-    >>> is_prime(p-1)
-    0
-    >>> is_prime(p)
-    1
-    >>> is_prime(p+1)
-    0
-    """
-
-    nbytes = int(math.ceil(nbits/8.))
-
-    while True:
-        integer = read_random_int(nbits)
-
-        # Make sure it's odd
-        integer |= 1
-
-        # Test for primeness
-        if is_prime(integer): break
-
-        # Retry if not prime
-
-    return integer
-
-def are_relatively_prime(a, b):
-    """Returns True if a and b are relatively prime, and False if they
-    are not.
-
-    >>> are_relatively_prime(2, 3)
-    1
-    >>> are_relatively_prime(2, 4)
-    0
-    """
-
-    d = gcd(a, b)
-    return (d == 1)
-
-def find_p_q(nbits):
-    """Returns a tuple of two different primes of nbits bits"""
-
-    p = getprime(nbits)
-    while True:
-        q = getprime(nbits)
-        if not q == p: break
-    
-    return (p, q)
-
-def extended_euclid_gcd(a, b):
-    """Returns a tuple (d, i, j) such that d = gcd(a, b) = ia + jb
-    """
-
-    if b == 0:
-        return (a, 1, 0)
-
-    q = abs(a % b)
-    r = long(a / b)
-    (d, k, l) = extended_euclid_gcd(b, q)
-
-    return (d, l, k - l*r)
-
-# Main function: calculate encryption and decryption keys
-def calculate_keys(p, q, nbits):
-    """Calculates an encryption and a decryption key for p and q, and
-    returns them as a tuple (e, d)"""
-
-    n = p * q
-    phi_n = (p-1) * (q-1)
-
-    while True:
-        # Make sure e has enough bits so we ensure "wrapping" through
-        # modulo n
-        e = getprime(max(8, nbits/2))
-        if are_relatively_prime(e, n) and are_relatively_prime(e, phi_n): break
-
-    (d, i, j) = extended_euclid_gcd(e, phi_n)
-
-    if not d == 1:
-        raise Exception("e (%d) and phi_n (%d) are not relatively prime" % (e, phi_n))
-
-    if not (e * i) % phi_n == 1:
-        raise Exception("e (%d) and i (%d) are not mult. inv. modulo phi_n (%d)" % (e, i, phi_n))
-
-    return (e, i)
-
-
-def gen_keys(nbits):
-    """Generate RSA keys of nbits bits. Returns (p, q, e, d).
-
-    Note: this can take a long time, depending on the key size.
-    """
-
-    while True:
-        (p, q) = find_p_q(nbits)
-        (e, d) = calculate_keys(p, q, nbits)
-
-        # For some reason, d is sometimes negative. We don't know how
-        # to fix it (yet), so we keep trying until everything is shiny
-        if d > 0: break
-
-    return (p, q, e, d)
-
-def gen_pubpriv_keys(nbits):
-    """Generates public and private keys, and returns them as (pub,
-    priv).
-
-    The public key consists of a dict {e: ..., , n: ....). The private
-    key consists of a dict {d: ...., p: ...., q: ....).
-    """
-    
-    (p, q, e, d) = gen_keys(nbits)
-
-    return ( {'e': e, 'n': p*q}, {'d': d, 'p': p, 'q': q} )
-
-def encrypt_int(message, ekey, n):
-    """Encrypts a message using encryption key 'ekey', working modulo
-    n"""
-
-    if type(message) is types.IntType:
-        return encrypt_int(long(message), ekey, n)
-
-    if not type(message) is types.LongType:
-        raise TypeError("You must pass a long or an int")
-
-    if message > 0 and \
-            math.floor(math.log(message, 2)) > math.floor(math.log(n, 2)):
-        raise OverflowError("The message is too long")
-
-    return fast_exponentiation(message, ekey, n)
-
-def decrypt_int(cyphertext, dkey, n):
-    """Decrypts a cypher text using the decryption key 'dkey', working
-    modulo n"""
-
-    return encrypt_int(cyphertext, dkey, n)
-
-def sign_int(message, dkey, n):
-    """Signs 'message' using key 'dkey', working modulo n"""
-
-    return decrypt_int(message, dkey, n)
-
-def verify_int(signed, ekey, n):
-    """verifies 'signed' using key 'ekey', working modulo n"""
-
-    return encrypt_int(signed, ekey, n)
-
-def picklechops(chops):
-    """Pickles and base64encodes it's argument chops"""
-
-    value = zlib.compress(dumps(chops))
-    encoded = base64.encodestring(value)
-    return encoded.strip()
-
-def unpicklechops(string):
-    """base64decodes and unpickes it's argument string into chops"""
-
-    return loads(zlib.decompress(base64.decodestring(string)))
-
-def chopstring(message, key, n, funcref):
-    """Splits 'message' into chops that are at most as long as n,
-    converts these into integers, and calls funcref(integer, key, n)
-    for each chop.
-
-    Used by 'encrypt' and 'sign'.
-    """
-
-    msglen = len(message)
-    mbits = msglen * 8
-    nbits = int(math.floor(math.log(n, 2)))
-    nbytes = nbits / 8
-    blocks = msglen / nbytes
-
-    if msglen % nbytes > 0:
-        blocks += 1
-
-    cypher = []
-    
-    for bindex in range(blocks):
-        offset = bindex * nbytes
-        block = message[offset:offset+nbytes]
-        value = bytes2int(block)
-        cypher.append(funcref(value, key, n))
-
-    return picklechops(cypher)
-
-def gluechops(chops, key, n, funcref):
-    """Glues chops back together into a string.  calls
-    funcref(integer, key, n) for each chop.
-
-    Used by 'decrypt' and 'verify'.
-    """
-    message = ""
-
-    chops = unpicklechops(chops)
-    
-    for cpart in chops:
-        mpart = funcref(cpart, key, n)
-        message += int2bytes(mpart)
-    
-    return message
-
-def encrypt(message, key):
-    """Encrypts a string 'message' with the public key 'key'"""
-    
-    return chopstring(message, key['e'], key['n'], encrypt_int)
-
-def sign(message, key):
-    """Signs a string 'message' with the private key 'key'"""
-    
-    return chopstring(message, key['d'], key['p']*key['q'], decrypt_int)
-
-def decrypt(cypher, key):
-    """Decrypts a cypher with the private key 'key'"""
-
-    return gluechops(cypher, key['d'], key['p']*key['q'], decrypt_int)
-
-def verify(cypher, key):
-    """Verifies a cypher with the public key 'key'"""
-
-    return gluechops(cypher, key['e'], key['n'], encrypt_int)
-
-# Do doctest if we're not imported
-if __name__ == "__main__":
-    import doctest
-    doctest.testmod()
-
-__all__ = ["gen_pubpriv_keys", "encrypt", "decrypt", "sign", "verify"]
-

rsa/_version200.py

@@ -1,529 +0,0 @@
-"""RSA module
-
-Module for calculating large primes, and RSA encryption, decryption,
-signing and verification. Includes generating public and private keys.
-
-WARNING: this implementation does not use random padding, compression of the
-cleartext input to prevent repetitions, or other common security improvements.
-Use with care.
-
-"""
-
-__author__ = "Sybren Stuvel, Marloes de Boer, Ivo Tamboer, and Barry Mead"
-__date__ = "2010-02-08"
-__version__ = '2.0'
-
-import math
-import os
-import random
-import sys
-import types
-from rsa._compat import byte
-
-# Display a warning that this insecure version is imported.
-import warnings
-warnings.warn('Insecure version of the RSA module is imported as %s' % __name__)
-
-
-def bit_size(number):
-    """Returns the number of bits required to hold a specific long number"""
-
-    return int(math.ceil(math.log(number,2)))
-
-def gcd(p, q):
-    """Returns the greatest common divisor of p and q
-    >>> gcd(48, 180)
-    12
-    """
-    # Iterateive Version is faster and uses much less stack space
-    while q != 0:
-        if p < q: (p,q) = (q,p)
-        (p,q) = (q, p % q)
-    return p
-    
-
-def bytes2int(bytes):
-    """Converts a list of bytes or a string to an integer
-
-    >>> (((128 * 256) + 64) * 256) + 15
-    8405007
-    >>> l = [128, 64, 15]
-    >>> bytes2int(l)              #same as bytes2int('\x80@\x0f')
-    8405007
-    """
-
-    if not (type(bytes) is types.ListType or type(bytes) is types.StringType):
-        raise TypeError("You must pass a string or a list")
-
-    # Convert byte stream to integer
-    integer = 0
-    for byte in bytes:
-        integer *= 256
-        if type(byte) is types.StringType: byte = ord(byte)
-        integer += byte
-
-    return integer
-
-def int2bytes(number):
-    """
-    Converts a number to a string of bytes
-    """
-
-    if not (type(number) is types.LongType or type(number) is types.IntType):
-        raise TypeError("You must pass a long or an int")
-
-    string = ""
-
-    while number > 0:
-        string = "%s%s" % (byte(number & 0xFF), string)
-        number /= 256
-    
-    return string
-
-def to64(number):
-    """Converts a number in the range of 0 to 63 into base 64 digit
-    character in the range of '0'-'9', 'A'-'Z', 'a'-'z','-','_'.
-    
-    >>> to64(10)
-    'A'
-    """
-
-    if not (type(number) is types.LongType or type(number) is types.IntType):
-        raise TypeError("You must pass a long or an int")
-
-    if 0 <= number <= 9:            #00-09 translates to '0' - '9'
-        return byte(number + 48)
-
-    if 10 <= number <= 35:
-        return byte(number + 55)     #10-35 translates to 'A' - 'Z'
-
-    if 36 <= number <= 61:
-        return byte(number + 61)     #36-61 translates to 'a' - 'z'
-
-    if number == 62:                # 62   translates to '-' (minus)
-        return byte(45)
-
-    if number == 63:                # 63   translates to '_' (underscore)
-        return byte(95)
-
-    raise ValueError('Invalid Base64 value: %i' % number)
-
-
-def from64(number):
-    """Converts an ordinal character value in the range of
-    0-9,A-Z,a-z,-,_ to a number in the range of 0-63.
-    
-    >>> from64(49)
-    1
-    """
-
-    if not (type(number) is types.LongType or type(number) is types.IntType):
-        raise TypeError("You must pass a long or an int")
-
-    if 48 <= number <= 57:         #ord('0') - ord('9') translates to 0-9
-        return(number - 48)
-
-    if 65 <= number <= 90:         #ord('A') - ord('Z') translates to 10-35
-        return(number - 55)
-
-    if 97 <= number <= 122:        #ord('a') - ord('z') translates to 36-61
-        return(number - 61)
-
-    if number == 45:               #ord('-') translates to 62
-        return(62)
-
-    if number == 95:               #ord('_') translates to 63
-        return(63)
-
-    raise ValueError('Invalid Base64 value: %i' % number)
-
-
-def int2str64(number):
-    """Converts a number to a string of base64 encoded characters in
-    the range of '0'-'9','A'-'Z,'a'-'z','-','_'.
-    
-    >>> int2str64(123456789)
-    '7MyqL'
-    """
-
-    if not (type(number) is types.LongType or type(number) is types.IntType):
-        raise TypeError("You must pass a long or an int")
-
-    string = ""
-
-    while number > 0:
-        string = "%s%s" % (to64(number & 0x3F), string)
-        number /= 64
-
-    return string
-
-
-def str642int(string):
-    """Converts a base64 encoded string into an integer.
-    The chars of this string in in the range '0'-'9','A'-'Z','a'-'z','-','_'
-    
-    >>> str642int('7MyqL')
-    123456789
-    """
-
-    if not (type(string) is types.ListType or type(string) is types.StringType):
-        raise TypeError("You must pass a string or a list")
-
-    integer = 0
-    for byte in string:
-        integer *= 64
-        if type(byte) is types.StringType: byte = ord(byte)
-        integer += from64(byte)
-
-    return integer
-
-def read_random_int(nbits):
-    """Reads a random integer of approximately nbits bits rounded up
-    to whole bytes"""
-
-    nbytes = int(math.ceil(nbits/8.))
-    randomdata = os.urandom(nbytes)
-    return bytes2int(randomdata)
-
-def randint(minvalue, maxvalue):
-    """Returns a random integer x with minvalue <= x <= maxvalue"""
-
-    # Safety - get a lot of random data even if the range is fairly
-    # small
-    min_nbits = 32
-
-    # The range of the random numbers we need to generate
-    range = (maxvalue - minvalue) + 1
-
-    # Which is this number of bytes
-    rangebytes = ((bit_size(range) + 7) / 8)
-
-    # Convert to bits, but make sure it's always at least min_nbits*2
-    rangebits = max(rangebytes * 8, min_nbits * 2)
-    
-    # Take a random number of bits between min_nbits and rangebits
-    nbits = random.randint(min_nbits, rangebits)
-    
-    return (read_random_int(nbits) % range) + minvalue
-
-def jacobi(a, b):
-    """Calculates the value of the Jacobi symbol (a/b)
-    where both a and b are positive integers, and b is odd
-    """
-
-    if a == 0: return 0
-    result = 1
-    while a > 1:
-        if a & 1:
-            if ((a-1)*(b-1) >> 2) & 1:
-                result = -result
-            a, b = b % a, a
-        else:
-            if (((b * b) - 1) >> 3) & 1:
-                result = -result
-            a >>= 1
-    if a == 0: return 0
-    return result
-
-def jacobi_witness(x, n):
-    """Returns False if n is an Euler pseudo-prime with base x, and
-    True otherwise.
-    """
-
-    j = jacobi(x, n) % n
-    f = pow(x, (n-1)/2, n)
-
-    if j == f: return False
-    return True
-
-def randomized_primality_testing(n, k):
-    """Calculates whether n is composite (which is always correct) or
-    prime (which is incorrect with error probability 2**-k)
-
-    Returns False if the number is composite, and True if it's
-    probably prime.
-    """
-
-    # 50% of Jacobi-witnesses can report compositness of non-prime numbers
-
-    for i in range(k):
-        x = randint(1, n-1)
-        if jacobi_witness(x, n): return False
-    
-    return True
-
-def is_prime(number):
-    """Returns True if the number is prime, and False otherwise.
-
-    >>> is_prime(42)
-    0
-    >>> is_prime(41)
-    1
-    """
-
-    if randomized_primality_testing(number, 6):
-        # Prime, according to Jacobi
-        return True
-    
-    # Not prime
-    return False
-
-    
-def getprime(nbits):
-    """Returns a prime number of max. 'math.ceil(nbits/8)*8' bits. In
-    other words: nbits is rounded up to whole bytes.
-
-    >>> p = getprime(8)
-    >>> is_prime(p-1)
-    0
-    >>> is_prime(p)
-    1
-    >>> is_prime(p+1)
-    0
-    """
-
-    while True:
-        integer = read_random_int(nbits)
-
-        # Make sure it's odd
-        integer |= 1
-
-        # Test for primeness
-        if is_prime(integer): break
-
-        # Retry if not prime
-
-    return integer
-
-def are_relatively_prime(a, b):
-    """Returns True if a and b are relatively prime, and False if they
-    are not.
-
-    >>> are_relatively_prime(2, 3)
-    1
-    >>> are_relatively_prime(2, 4)
-    0
-    """
-
-    d = gcd(a, b)
-    return (d == 1)
-
-def find_p_q(nbits):
-    """Returns a tuple of two different primes of nbits bits"""
-    pbits = nbits + (nbits/16)  #Make sure that p and q aren't too close
-    qbits = nbits - (nbits/16)  #or the factoring programs can factor n
-    p = getprime(pbits)
-    while True:
-        q = getprime(qbits)
-        #Make sure p and q are different.
-        if not q == p: break
-    return (p, q)
-
-def extended_gcd(a, b):
-    """Returns a tuple (r, i, j) such that r = gcd(a, b) = ia + jb
-    """
-    # r = gcd(a,b) i = multiplicitive inverse of a mod b
-    #      or      j = multiplicitive inverse of b mod a
-    # Neg return values for i or j are made positive mod b or a respectively
-    # Iterateive Version is faster and uses much less stack space
-    x = 0
-    y = 1
-    lx = 1
-    ly = 0
-    oa = a                             #Remember original a/b to remove 
-    ob = b                             #negative values from return results
-    while b != 0:
-        q = long(a/b)
-        (a, b)  = (b, a % b)
-        (x, lx) = ((lx - (q * x)),x)
-        (y, ly) = ((ly - (q * y)),y)
-    if (lx < 0): lx += ob              #If neg wrap modulo orignal b
-    if (ly < 0): ly += oa              #If neg wrap modulo orignal a
-    return (a, lx, ly)                 #Return only positive values
-
-# Main function: calculate encryption and decryption keys
-def calculate_keys(p, q, nbits):
-    """Calculates an encryption and a decryption key for p and q, and
-    returns them as a tuple (e, d)"""
-
-    n = p * q
-    phi_n = (p-1) * (q-1)
-
-    while True:
-        # Make sure e has enough bits so we ensure "wrapping" through
-        # modulo n
-        e = max(65537,getprime(nbits/4))
-        if are_relatively_prime(e, n) and are_relatively_prime(e, phi_n): break
-
-    (d, i, j) = extended_gcd(e, phi_n)
-
-    if not d == 1:
-        raise Exception("e (%d) and phi_n (%d) are not relatively prime" % (e, phi_n))
-    if (i < 0):
-        raise Exception("New extended_gcd shouldn't return negative values")
-    if not (e * i) % phi_n == 1:
-        raise Exception("e (%d) and i (%d) are not mult. inv. modulo phi_n (%d)" % (e, i, phi_n))
-
-    return (e, i)
-
-
-def gen_keys(nbits):
-    """Generate RSA keys of nbits bits. Returns (p, q, e, d).
-
-    Note: this can take a long time, depending on the key size.
-    """
-
-    (p, q) = find_p_q(nbits)
-    (e, d) = calculate_keys(p, q, nbits)
-
-    return (p, q, e, d)
-
-def newkeys(nbits):
-    """Generates public and private keys, and returns them as (pub,
-    priv).
-
-    The public key consists of a dict {e: ..., , n: ....). The private
-    key consists of a dict {d: ...., p: ...., q: ....).
-    """
-    nbits = max(9,nbits)           # Don't let nbits go below 9 bits
-    (p, q, e, d) = gen_keys(nbits)
-
-    return ( {'e': e, 'n': p*q}, {'d': d, 'p': p, 'q': q} )
-
-def encrypt_int(message, ekey, n):
-    """Encrypts a message using encryption key 'ekey', working modulo n"""
-
-    if type(message) is types.IntType:
-        message = long(message)
-
-    if not type(message) is types.LongType:
-        raise TypeError("You must pass a long or int")
-
-    if message < 0 or message > n:
-        raise OverflowError("The message is too long")
-
-    #Note: Bit exponents start at zero (bit counts start at 1) this is correct
-    safebit = bit_size(n) - 2                   #compute safe bit (MSB - 1)
-    message += (1 << safebit)                   #add safebit to ensure folding
-
-    return pow(message, ekey, n)
-
-def decrypt_int(cyphertext, dkey, n):
-    """Decrypts a cypher text using the decryption key 'dkey', working
-    modulo n"""
-
-    message = pow(cyphertext, dkey, n)
-
-    safebit = bit_size(n) - 2                   #compute safe bit (MSB - 1)
-    message -= (1 << safebit)                   #remove safebit before decode
-
-    return message
-
-def encode64chops(chops):
-    """base64encodes chops and combines them into a ',' delimited string"""
-
-    chips = []                              #chips are character chops
-
-    for value in chops:
-        chips.append(int2str64(value))
-
-    #delimit chops with comma
-    encoded = ','.join(chips)
-
-    return encoded
-
-def decode64chops(string):
-    """base64decodes and makes a ',' delimited string into chops"""
-
-    chips = string.split(',')               #split chops at commas
-
-    chops = []
-
-    for string in chips:                    #make char chops (chips) into chops
-        chops.append(str642int(string))
-
-    return chops
-
-def chopstring(message, key, n, funcref):
-    """Chops the 'message' into integers that fit into n,
-    leaving room for a safebit to be added to ensure that all
-    messages fold during exponentiation.  The MSB of the number n
-    is not independant modulo n (setting it could cause overflow), so
-    use the next lower bit for the safebit.  Therefore reserve 2-bits
-    in the number n for non-data bits.  Calls specified encryption
-    function for each chop.
-
-    Used by 'encrypt' and 'sign'.
-    """
-
-    msglen = len(message)
-    mbits = msglen * 8
-    #Set aside 2-bits so setting of safebit won't overflow modulo n.
-    nbits = bit_size(n) - 2             # leave room for safebit
-    nbytes = nbits / 8
-    blocks = msglen / nbytes
-
-    if msglen % nbytes > 0:
-        blocks += 1
-
-    cypher = []
-    
-    for bindex in range(blocks):
-        offset = bindex * nbytes
-        block = message[offset:offset+nbytes]
-        value = bytes2int(block)
-        cypher.append(funcref(value, key, n))
-
-    return encode64chops(cypher)   #Encode encrypted ints to base64 strings
-
-def gluechops(string, key, n, funcref):
-    """Glues chops back together into a string.  calls
-    funcref(integer, key, n) for each chop.
-
-    Used by 'decrypt' and 'verify'.
-    """
-    message = ""
-
-    chops = decode64chops(string)  #Decode base64 strings into integer chops
-    
-    for cpart in chops:
-        mpart = funcref(cpart, key, n) #Decrypt each chop
-        message += int2bytes(mpart)    #Combine decrypted strings into a msg
-    
-    return message
-
-def encrypt(message, key):
-    """Encrypts a string 'message' with the public key 'key'"""
-    if 'n' not in key:
-        raise Exception("You must use the public key with encrypt")
-
-    return chopstring(message, key['e'], key['n'], encrypt_int)
-
-def sign(message, key):
-    """Signs a string 'message' with the private key 'key'"""
-    if 'p' not in key:
-        raise Exception("You must use the private key with sign")
-
-    return chopstring(message, key['d'], key['p']*key['q'], encrypt_int)
-
-def decrypt(cypher, key):
-    """Decrypts a string 'cypher' with the private key 'key'"""
-    if 'p' not in key:
-        raise Exception("You must use the private key with decrypt")
-
-    return gluechops(cypher, key['d'], key['p']*key['q'], decrypt_int)
-
-def verify(cypher, key):
-    """Verifies a string 'cypher' with the public key 'key'"""
-    if 'n' not in key:
-        raise Exception("You must use the public key with verify")
-
-    return gluechops(cypher, key['e'], key['n'], decrypt_int)
-
-# Do doctest if we're not imported
-if __name__ == "__main__":
-    import doctest
-    doctest.testmod()
-
-__all__ = ["newkeys", "encrypt", "decrypt", "sign", "verify"]
-

rsa/bigfile.py

@@ -1,87 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-'''Large file support
-
-    - break a file into smaller blocks, and encrypt them, and store the
-      encrypted blocks in another file.
-
-    - take such an encrypted files, decrypt its blocks, and reconstruct the
-      original file.
-
-The encrypted file format is as follows, where || denotes byte concatenation:
-
-    FILE := VERSION || BLOCK || BLOCK ...
-
-    BLOCK := LENGTH || DATA
-
-    LENGTH := varint-encoded length of the subsequent data. Varint comes from
-    Google Protobuf, and encodes an integer into a variable number of bytes.
-    Each byte uses the 7 lowest bits to encode the value. The highest bit set
-    to 1 indicates the next byte is also part of the varint. The last byte will
-    have this bit set to 0.
-
-This file format is called the VARBLOCK format, in line with the varint format
-used to denote the block sizes.
-
-'''
-
-from rsa import key, common, pkcs1, varblock
-from rsa._compat import byte
-
-def encrypt_bigfile(infile, outfile, pub_key):
-    '''Encrypts a file, writing it to 'outfile' in VARBLOCK format.
-    
-    :param infile: file-like object to read the cleartext from
-    :param outfile: file-like object to write the crypto in VARBLOCK format to
-    :param pub_key: :py:class:`rsa.PublicKey` to encrypt with
-
-    '''
-
-    if not isinstance(pub_key, key.PublicKey):
-        raise TypeError('Public key required, but got %r' % pub_key)
-
-    key_bytes = common.bit_size(pub_key.n) // 8
-    blocksize = key_bytes - 11 # keep space for PKCS#1 padding
-
-    # Write the version number to the VARBLOCK file
-    outfile.write(byte(varblock.VARBLOCK_VERSION))
-
-    # Encrypt and write each block
-    for block in varblock.yield_fixedblocks(infile, blocksize):
-        crypto = pkcs1.encrypt(block, pub_key)
-
-        varblock.write_varint(outfile, len(crypto))
-        outfile.write(crypto)
-
-def decrypt_bigfile(infile, outfile, priv_key):
-    '''Decrypts an encrypted VARBLOCK file, writing it to 'outfile'
-    
-    :param infile: file-like object to read the crypto in VARBLOCK format from
-    :param outfile: file-like object to write the cleartext to
-    :param priv_key: :py:class:`rsa.PrivateKey` to decrypt with
-
-    '''
-
-    if not isinstance(priv_key, key.PrivateKey):
-        raise TypeError('Private key required, but got %r' % priv_key)
-    
-    for block in varblock.yield_varblocks(infile):
-        cleartext = pkcs1.decrypt(block, priv_key)
-        outfile.write(cleartext)
-
-__all__ = ['encrypt_bigfile', 'decrypt_bigfile']
-

rsa/cli.py

@@ -1,379 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-'''Commandline scripts.
-
-These scripts are called by the executables defined in setup.py.
-'''
-
-from __future__ import with_statement, print_function
-
-import abc
-import sys
-from optparse import OptionParser
-
-import rsa
-import rsa.bigfile
-import rsa.pkcs1
-
-HASH_METHODS = sorted(rsa.pkcs1.HASH_METHODS.keys())
-
-def keygen():
-    '''Key generator.'''
-
-    # Parse the CLI options
-    parser = OptionParser(usage='usage: %prog [options] keysize',
-            description='Generates a new RSA keypair of "keysize" bits.')
-    
-    parser.add_option('--pubout', type='string',
-            help='Output filename for the public key. The public key is '
-            'not saved if this option is not present. You can use '
-            'pyrsa-priv2pub to create the public key file later.')
-    
-    parser.add_option('-o', '--out', type='string',
-            help='Output filename for the private key. The key is '
-            'written to stdout if this option is not present.')
-
-    parser.add_option('--form',
-            help='key format of the private and public keys - default PEM',
-            choices=('PEM', 'DER'), default='PEM')
-
-    (cli, cli_args) = parser.parse_args(sys.argv[1:])
-
-    if len(cli_args) != 1:
-        parser.print_help()
-        raise SystemExit(1)
-    
-    try:
-        keysize = int(cli_args[0])
-    except ValueError:
-        parser.print_help()
-        print('Not a valid number: %s' % cli_args[0], file=sys.stderr)
-        raise SystemExit(1)
-
-    print('Generating %i-bit key' % keysize, file=sys.stderr)
-    (pub_key, priv_key) = rsa.newkeys(keysize)
-
-
-    # Save public key
-    if cli.pubout:
-        print('Writing public key to %s' % cli.pubout, file=sys.stderr)
-        data = pub_key.save_pkcs1(format=cli.form)
-        with open(cli.pubout, 'wb') as outfile:
-            outfile.write(data)
-
-    # Save private key
-    data = priv_key.save_pkcs1(format=cli.form)
-    
-    if cli.out:
-        print('Writing private key to %s' % cli.out, file=sys.stderr)
-        with open(cli.out, 'wb') as outfile:
-            outfile.write(data)
-    else:
-        print('Writing private key to stdout', file=sys.stderr)
-        sys.stdout.write(data)
-
-
-class CryptoOperation(object):
-    '''CLI callable that operates with input, output, and a key.'''
-
-    __metaclass__ = abc.ABCMeta
-
-    keyname = 'public' # or 'private'
-    usage = 'usage: %%prog [options] %(keyname)s_key'
-    description = None
-    operation = 'decrypt'
-    operation_past = 'decrypted'
-    operation_progressive = 'decrypting'
-    input_help = 'Name of the file to %(operation)s. Reads from stdin if ' \
-            'not specified.'
-    output_help = 'Name of the file to write the %(operation_past)s file ' \
-            'to. Written to stdout if this option is not present.'
-    expected_cli_args = 1
-    has_output = True
-
-    key_class = rsa.PublicKey
-
-    def __init__(self):
-        self.usage = self.usage % self.__class__.__dict__
-        self.input_help = self.input_help % self.__class__.__dict__
-        self.output_help = self.output_help % self.__class__.__dict__
-
-    @abc.abstractmethod
-    def perform_operation(self, indata, key, cli_args=None):
-        '''Performs the program's operation.
-
-        Implement in a subclass.
-
-        :returns: the data to write to the output.
-        '''
-
-    def __call__(self):
-        '''Runs the program.'''
-
-        (cli, cli_args) = self.parse_cli()
-
-        key = self.read_key(cli_args[0], cli.keyform)
-
-        indata = self.read_infile(cli.input)
-
-        print(self.operation_progressive.title(), file=sys.stderr)
-        outdata = self.perform_operation(indata, key, cli_args)
-
-        if self.has_output:
-            self.write_outfile(outdata, cli.output)
-
-    def parse_cli(self):
-        '''Parse the CLI options
-        
-        :returns: (cli_opts, cli_args)
-        '''
-
-        parser = OptionParser(usage=self.usage, description=self.description)
-        
-        parser.add_option('-i', '--input', type='string', help=self.input_help)
-
-        if self.has_output:
-            parser.add_option('-o', '--output', type='string', help=self.output_help)
-
-        parser.add_option('--keyform',
-                help='Key format of the %s key - default PEM' % self.keyname,
-                choices=('PEM', 'DER'), default='PEM')
-
-        (cli, cli_args) = parser.parse_args(sys.argv[1:])
-
-        if len(cli_args) != self.expected_cli_args:
-            parser.print_help()
-            raise SystemExit(1)
-
-        return (cli, cli_args)
-
-    def read_key(self, filename, keyform):
-        '''Reads a public or private key.'''
-
-        print('Reading %s key from %s' % (self.keyname, filename), file=sys.stderr)
-        with open(filename, 'rb') as keyfile:
-            keydata = keyfile.read()
-
-        return self.key_class.load_pkcs1(keydata, keyform)
-    
-    def read_infile(self, inname):
-        '''Read the input file'''
-
-        if inname:
-            print('Reading input from %s' % inname, file=sys.stderr)
-            with open(inname, 'rb') as infile:
-                return infile.read()
-
-        print('Reading input from stdin', file=sys.stderr)
-        return sys.stdin.read()
-
-    def write_outfile(self, outdata, outname):
-        '''Write the output file'''
-
-        if outname:
-            print('Writing output to %s' % outname, file=sys.stderr)
-            with open(outname, 'wb') as outfile:
-                outfile.write(outdata)
-        else:
-            print('Writing output to stdout', file=sys.stderr)
-            sys.stdout.write(outdata)
-
-class EncryptOperation(CryptoOperation):
-    '''Encrypts a file.'''
-
-    keyname = 'public'
-    description = ('Encrypts a file. The file must be shorter than the key '
-            'length in order to be encrypted. For larger files, use the '
-            'pyrsa-encrypt-bigfile command.')
-    operation = 'encrypt'
-    operation_past = 'encrypted'
-    operation_progressive = 'encrypting'
-
-
-    def perform_operation(self, indata, pub_key, cli_args=None):
-        '''Encrypts files.'''
-
-        return rsa.encrypt(indata, pub_key)
-
-class DecryptOperation(CryptoOperation):
-    '''Decrypts a file.'''
-
-    keyname = 'private'
-    description = ('Decrypts a file. The original file must be shorter than '
-            'the key length in order to have been encrypted. For larger '
-            'files, use the pyrsa-decrypt-bigfile command.')
-    operation = 'decrypt'
-    operation_past = 'decrypted'
-    operation_progressive = 'decrypting'
-    key_class = rsa.PrivateKey
-
-    def perform_operation(self, indata, priv_key, cli_args=None):
-        '''Decrypts files.'''
-
-        return rsa.decrypt(indata, priv_key)
-
-class SignOperation(CryptoOperation):
-    '''Signs a file.'''
-
-    keyname = 'private'
-    usage = 'usage: %%prog [options] private_key hash_method'
-    description = ('Signs a file, outputs the signature. Choose the hash '
-            'method from %s' % ', '.join(HASH_METHODS))
-    operation = 'sign'
-    operation_past = 'signature'
-    operation_progressive = 'Signing'
-    key_class = rsa.PrivateKey
-    expected_cli_args = 2
-
-    output_help = ('Name of the file to write the signature to. Written '
-            'to stdout if this option is not present.')
-
-    def perform_operation(self, indata, priv_key, cli_args):
-        '''Decrypts files.'''
-
-        hash_method = cli_args[1]
-        if hash_method not in HASH_METHODS:
-            raise SystemExit('Invalid hash method, choose one of %s' % 
-                    ', '.join(HASH_METHODS))
-
-        return rsa.sign(indata, priv_key, hash_method)
-
-class VerifyOperation(CryptoOperation):
-    '''Verify a signature.'''
-
-    keyname = 'public'
-    usage = 'usage: %%prog [options] private_key signature_file'
-    description = ('Verifies a signature, exits with status 0 upon success, '
-        'prints an error message and exits with status 1 upon error.')
-    operation = 'verify'
-    operation_past = 'verified'
-    operation_progressive = 'Verifying'
-    key_class = rsa.PublicKey
-    expected_cli_args = 2
-    has_output = False
-
-    def perform_operation(self, indata, pub_key, cli_args):
-        '''Decrypts files.'''
-
-        signature_file = cli_args[1]
-        
-        with open(signature_file, 'rb') as sigfile:
-            signature = sigfile.read()
-
-        try:
-            rsa.verify(indata, signature, pub_key)
-        except rsa.VerificationError:
-            raise SystemExit('Verification failed.')
-
-        print('Verification OK', file=sys.stderr)
-
-
-class BigfileOperation(CryptoOperation):
-    '''CryptoOperation that doesn't read the entire file into memory.'''
-
-    def __init__(self):
-        CryptoOperation.__init__(self)
-
-        self.file_objects = []
-
-    def __del__(self):
-        '''Closes any open file handles.'''
-
-        for fobj in self.file_objects:
-            fobj.close()
-
-    def __call__(self):
-        '''Runs the program.'''
-
-        (cli, cli_args) = self.parse_cli()
-
-        key = self.read_key(cli_args[0], cli.keyform)
-
-        # Get the file handles
-        infile = self.get_infile(cli.input)
-        outfile = self.get_outfile(cli.output)
-
-        # Call the operation
-        print(self.operation_progressive.title(), file=sys.stderr)
-        self.perform_operation(infile, outfile, key, cli_args)
-
-    def get_infile(self, inname):
-        '''Returns the input file object'''
-
-        if inname:
-            print('Reading input from %s' % inname, file=sys.stderr)
-            fobj = open(inname, 'rb')
-            self.file_objects.append(fobj)
-        else:
-            print('Reading input from stdin', file=sys.stderr)
-            fobj = sys.stdin
-
-        return fobj
-
-    def get_outfile(self, outname):
-        '''Returns the output file object'''
-
-        if outname:
-            print('Will write output to %s' % outname, file=sys.stderr)
-            fobj = open(outname, 'wb')
-            self.file_objects.append(fobj)
-        else:
-            print('Will write output to stdout', file=sys.stderr)
-            fobj = sys.stdout
-
-        return fobj
-
-class EncryptBigfileOperation(BigfileOperation):
-    '''Encrypts a file to VARBLOCK format.'''
-
-    keyname = 'public'
-    description = ('Encrypts a file to an encrypted VARBLOCK file. The file '
-            'can be larger than the key length, but the output file is only '
-            'compatible with Python-RSA.')
-    operation = 'encrypt'
-    operation_past = 'encrypted'
-    operation_progressive = 'encrypting'
-
-    def perform_operation(self, infile, outfile, pub_key, cli_args=None):
-        '''Encrypts files to VARBLOCK.'''
-
-        return rsa.bigfile.encrypt_bigfile(infile, outfile, pub_key)
-
-class DecryptBigfileOperation(BigfileOperation):
-    '''Decrypts a file in VARBLOCK format.'''
-
-    keyname = 'private'
-    description = ('Decrypts an encrypted VARBLOCK file that was encrypted '
-            'with pyrsa-encrypt-bigfile')
-    operation = 'decrypt'
-    operation_past = 'decrypted'
-    operation_progressive = 'decrypting'
-    key_class = rsa.PrivateKey
-
-    def perform_operation(self, infile, outfile, priv_key, cli_args=None):
-        '''Decrypts a VARBLOCK file.'''
-
-        return rsa.bigfile.decrypt_bigfile(infile, outfile, priv_key)
-
-
-encrypt = EncryptOperation()
-decrypt = DecryptOperation()
-sign = SignOperation()
-verify = VerifyOperation()
-encrypt_bigfile = EncryptBigfileOperation()
-decrypt_bigfile = DecryptBigfileOperation()
-

rsa/common.py

@@ -1,185 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-'''Common functionality shared by several modules.'''
-
-
-def bit_size(num):
-    '''
-    Number of bits needed to represent a integer excluding any prefix
-    0 bits.
-
-    As per definition from http://wiki.python.org/moin/BitManipulation and
-    to match the behavior of the Python 3 API.
-
-    Usage::
-    
-        >>> bit_size(1023)
-        10
-        >>> bit_size(1024)
-        11
-        >>> bit_size(1025)
-        11
-
-    :param num:
-        Integer value. If num is 0, returns 0. Only the absolute value of the
-        number is considered. Therefore, signed integers will be abs(num)
-        before the number's bit length is determined.
-    :returns:
-        Returns the number of bits in the integer.
-    '''
-    if num == 0:
-        return 0
-    if num < 0:
-        num = -num
-
-    # Make sure this is an int and not a float.
-    num & 1
-
-    hex_num = "%x" % num
-    return ((len(hex_num) - 1) * 4) + {
-        '0':0, '1':1, '2':2, '3':2,
-        '4':3, '5':3, '6':3, '7':3,
-        '8':4, '9':4, 'a':4, 'b':4,
-        'c':4, 'd':4, 'e':4, 'f':4,
-     }[hex_num[0]]
-
-
-def _bit_size(number):
-    '''
-    Returns the number of bits required to hold a specific long number.
-    '''
-    if number < 0:
-        raise ValueError('Only nonnegative numbers possible: %s' % number)
-
-    if number == 0:
-        return 0
-    
-    # This works, even with very large numbers. When using math.log(number, 2),
-    # you'll get rounding errors and it'll fail.
-    bits = 0
-    while number:
-        bits += 1
-        number >>= 1
-
-    return bits
-
-
-def byte_size(number):
-    '''
-    Returns the number of bytes required to hold a specific long number.
-    
-    The number of bytes is rounded up.
-
-    Usage::
-
-        >>> byte_size(1 << 1023)
-        128
-        >>> byte_size((1 << 1024) - 1)
-        128
-        >>> byte_size(1 << 1024)
-        129
-
-    :param number:
-        An unsigned integer
-    :returns:
-        The number of bytes required to hold a specific long number.
-    '''
-    quanta, mod = divmod(bit_size(number), 8)
-    if mod or number == 0:
-        quanta += 1
-    return quanta
-    #return int(math.ceil(bit_size(number) / 8.0))
-
-
-def extended_gcd(a, b):
-    '''Returns a tuple (r, i, j) such that r = gcd(a, b) = ia + jb
-    '''
-    # r = gcd(a,b) i = multiplicitive inverse of a mod b
-    #      or      j = multiplicitive inverse of b mod a
-    # Neg return values for i or j are made positive mod b or a respectively
-    # Iterateive Version is faster and uses much less stack space
-    x = 0
-    y = 1
-    lx = 1
-    ly = 0
-    oa = a                             #Remember original a/b to remove 
-    ob = b                             #negative values from return results
-    while b != 0:
-        q = a // b
-        (a, b)  = (b, a % b)
-        (x, lx) = ((lx - (q * x)),x)
-        (y, ly) = ((ly - (q * y)),y)
-    if (lx < 0): lx += ob              #If neg wrap modulo orignal b
-    if (ly < 0): ly += oa              #If neg wrap modulo orignal a
-    return (a, lx, ly)                 #Return only positive values
-
-
-def inverse(x, n):
-    '''Returns x^-1 (mod n)
-
-    >>> inverse(7, 4)
-    3
-    >>> (inverse(143, 4) * 143) % 4
-    1
-    '''
-
-    (divider, inv, _) = extended_gcd(x, n)
-
-    if divider != 1:
-        raise ValueError("x (%d) and n (%d) are not relatively prime" % (x, n))
-
-    return inv
-
-
-def crt(a_values, modulo_values):
-    '''Chinese Remainder Theorem.
-
-    Calculates x such that x = a[i] (mod m[i]) for each i.
-
-    :param a_values: the a-values of the above equation
-    :param modulo_values: the m-values of the above equation
-    :returns: x such that x = a[i] (mod m[i]) for each i
-    
-
-    >>> crt([2, 3], [3, 5])
-    8
-
-    >>> crt([2, 3, 2], [3, 5, 7])
-    23
-
-    >>> crt([2, 3, 0], [7, 11, 15])
-    135
-    '''
-
-    m = 1
-    x = 0 
-
-    for modulo in modulo_values:
-        m *= modulo
-
-    for (m_i, a_i) in zip(modulo_values, a_values):
-        M_i = m // m_i
-        inv = inverse(M_i, m_i)
-
-        x = (x + a_i * M_i * inv) % m
-
-    return x
-
-if __name__ == '__main__':
-    import doctest
-    doctest.testmod()
-

rsa/core.py

@@ -1,58 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-'''Core mathematical operations.
-
-This is the actual core RSA implementation, which is only defined
-mathematically on integers.
-'''
-
-
-from rsa._compat import is_integer
-
-def assert_int(var, name):
-
-    if is_integer(var):
-        return
-
-    raise TypeError('%s should be an integer, not %s' % (name, var.__class__))
-
-def encrypt_int(message, ekey, n):
-    '''Encrypts a message using encryption key 'ekey', working modulo n'''
-
-    assert_int(message, 'message')
-    assert_int(ekey, 'ekey')
-    assert_int(n, 'n')
-
-    if message < 0:
-        raise ValueError('Only non-negative numbers are supported')
-         
-    if message > n:
-        raise OverflowError("The message %i is too long for n=%i" % (message, n))
-
-    return pow(message, ekey, n)
-
-def decrypt_int(cyphertext, dkey, n):
-    '''Decrypts a cypher text using the decryption key 'dkey', working
-    modulo n'''
-
-    assert_int(cyphertext, 'cyphertext')
-    assert_int(dkey, 'dkey')
-    assert_int(n, 'n')
-
-    message = pow(cyphertext, dkey, n)
-    return message
-

rsa/key.py

@@ -1,581 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-'''RSA key generation code.
-
-Create new keys with the newkeys() function. It will give you a PublicKey and a
-PrivateKey object.
-
-Loading and saving keys requires the pyasn1 module. This module is imported as
-late as possible, such that other functionality will remain working in absence
-of pyasn1.
-
-'''
-
-import logging
-from rsa._compat import b
-
-import rsa.prime
-import rsa.pem
-import rsa.common
-
-log = logging.getLogger(__name__)
-
-class AbstractKey(object):
-    '''Abstract superclass for private and public keys.'''
-
-    @classmethod
-    def load_pkcs1(cls, keyfile, format='PEM'):
-        r'''Loads a key in PKCS#1 DER or PEM format.
-
-        :param keyfile: contents of a DER- or PEM-encoded file that contains
-            the public key.
-        :param format: the format of the file to load; 'PEM' or 'DER'
-
-        :return: a PublicKey object
-
-        '''
-
-        methods = {
-            'PEM': cls._load_pkcs1_pem,
-            'DER': cls._load_pkcs1_der,
-        }
-
-        if format not in methods:
-            formats = ', '.join(sorted(methods.keys()))
-            raise ValueError('Unsupported format: %r, try one of %s' % (format,
-                formats))
-
-        method = methods[format]
-        return method(keyfile)
-
-    def save_pkcs1(self, format='PEM'):
-        '''Saves the public key in PKCS#1 DER or PEM format.
-
-        :param format: the format to save; 'PEM' or 'DER'
-        :returns: the DER- or PEM-encoded public key.
-
-        '''
-
-        methods = {
-            'PEM': self._save_pkcs1_pem,
-            'DER': self._save_pkcs1_der,
-        }
-
-        if format not in methods:
-            formats = ', '.join(sorted(methods.keys()))
-            raise ValueError('Unsupported format: %r, try one of %s' % (format,
-                formats))
-
-        method = methods[format]
-        return method()
-
-class PublicKey(AbstractKey):
-    '''Represents a public RSA key.
-
-    This key is also known as the 'encryption key'. It contains the 'n' and 'e'
-    values.
-
-    Supports attributes as well as dictionary-like access. Attribute accesss is
-    faster, though.
-
-    >>> PublicKey(5, 3)
-    PublicKey(5, 3)
-
-    >>> key = PublicKey(5, 3)
-    >>> key.n
-    5
-    >>> key['n']
-    5
-    >>> key.e
-    3
-    >>> key['e']
-    3
-
-    '''
-
-    __slots__ = ('n', 'e')
-
-    def __init__(self, n, e):
-        self.n = n
-        self.e = e
-
-    def __getitem__(self, key):
-        return getattr(self, key)
-
-    def __repr__(self):
-        return 'PublicKey(%i, %i)' % (self.n, self.e)
-
-    def __eq__(self, other):
-        if other is None:
-            return False
-
-        if not isinstance(other, PublicKey):
-            return False
-
-        return self.n == other.n and self.e == other.e
-
-    def __ne__(self, other):
-        return not (self == other)
-
-    @classmethod
-    def _load_pkcs1_der(cls, keyfile):
-        r'''Loads a key in PKCS#1 DER format.
-
-        @param keyfile: contents of a DER-encoded file that contains the public
-            key.
-        @return: a PublicKey object
-
-        First let's construct a DER encoded key:
-
-        >>> import base64
-        >>> b64der = 'MAwCBQCNGmYtAgMBAAE='
-        >>> der = base64.decodestring(b64der)
-
-        This loads the file:
-
-        >>> PublicKey._load_pkcs1_der(der)
-        PublicKey(2367317549, 65537)
-
-        '''
-
-        from pyasn1.codec.der import decoder
-        (priv, _) = decoder.decode(keyfile)
-
-        # ASN.1 contents of DER encoded public key:
-        #
-        # RSAPublicKey ::= SEQUENCE {
-        #     modulus           INTEGER,  -- n
-        #     publicExponent    INTEGER,  -- e
-
-        as_ints = tuple(int(x) for x in priv)
-        return cls(*as_ints)
-
-    def _save_pkcs1_der(self):
-        '''Saves the public key in PKCS#1 DER format.
-
-        @returns: the DER-encoded public key.
-        '''
-
-        from pyasn1.type import univ, namedtype
-        from pyasn1.codec.der import encoder
-
-        class AsnPubKey(univ.Sequence):
-            componentType = namedtype.NamedTypes(
-                namedtype.NamedType('modulus', univ.Integer()),
-                namedtype.NamedType('publicExponent', univ.Integer()),
-            )
-
-        # Create the ASN object
-        asn_key = AsnPubKey()
-        asn_key.setComponentByName('modulus', self.n)
-        asn_key.setComponentByName('publicExponent', self.e)
-
-        return encoder.encode(asn_key)
-
-    @classmethod
-    def _load_pkcs1_pem(cls, keyfile):
-        '''Loads a PKCS#1 PEM-encoded public key file.
-
-        The contents of the file before the "-----BEGIN RSA PUBLIC KEY-----" and
-        after the "-----END RSA PUBLIC KEY-----" lines is ignored.
-
-        @param keyfile: contents of a PEM-encoded file that contains the public
-            key.
-        @return: a PublicKey object
-        '''
-
-        der = rsa.pem.load_pem(keyfile, 'RSA PUBLIC KEY')
-        return cls._load_pkcs1_der(der)
-
-    def _save_pkcs1_pem(self):
-        '''Saves a PKCS#1 PEM-encoded public key file.
-
-        @return: contents of a PEM-encoded file that contains the public key.
-        '''
-
-        der = self._save_pkcs1_der()
-        return rsa.pem.save_pem(der, 'RSA PUBLIC KEY')
-
-class PrivateKey(AbstractKey):
-    '''Represents a private RSA key.
-
-    This key is also known as the 'decryption key'. It contains the 'n', 'e',
-    'd', 'p', 'q' and other values.
-
-    Supports attributes as well as dictionary-like access. Attribute accesss is
-    faster, though.
-
-    >>> PrivateKey(3247, 65537, 833, 191, 17)
-    PrivateKey(3247, 65537, 833, 191, 17)
-
-    exp1, exp2 and coef don't have to be given, they will be calculated:
-
-    >>> pk = PrivateKey(3727264081, 65537, 3349121513, 65063, 57287)
-    >>> pk.exp1
-    55063
-    >>> pk.exp2
-    10095
-    >>> pk.coef
-    50797
-
-    If you give exp1, exp2 or coef, they will be used as-is:
-
-    >>> pk = PrivateKey(1, 2, 3, 4, 5, 6, 7, 8)
-    >>> pk.exp1
-    6
-    >>> pk.exp2
-    7
-    >>> pk.coef
-    8
-
-    '''
-
-    __slots__ = ('n', 'e', 'd', 'p', 'q', 'exp1', 'exp2', 'coef')
-
-    def __init__(self, n, e, d, p, q, exp1=None, exp2=None, coef=None):
-        self.n = n
-        self.e = e
-        self.d = d
-        self.p = p
-        self.q = q
-
-        # Calculate the other values if they aren't supplied
-        if exp1 is None:
-            self.exp1 = int(d % (p - 1))
-        else:
-            self.exp1 = exp1
-
-        if exp1 is None:
-            self.exp2 = int(d % (q - 1))
-        else:
-            self.exp2 = exp2
-
-        if coef is None:
-            self.coef = rsa.common.inverse(q, p)
-        else:
-            self.coef = coef
-
-    def __getitem__(self, key):
-        return getattr(self, key)
-
-    def __repr__(self):
-        return 'PrivateKey(%(n)i, %(e)i, %(d)i, %(p)i, %(q)i)' % self
-
-    def __eq__(self, other):
-        if other is None:
-            return False
-
-        if not isinstance(other, PrivateKey):
-            return False
-
-        return (self.n == other.n and
-            self.e == other.e and
-            self.d == other.d and
-            self.p == other.p and
-            self.q == other.q and
-            self.exp1 == other.exp1 and
-            self.exp2 == other.exp2 and
-            self.coef == other.coef)
-
-    def __ne__(self, other):
-        return not (self == other)
-
-    @classmethod
-    def _load_pkcs1_der(cls, keyfile):
-        r'''Loads a key in PKCS#1 DER format.
-
-        @param keyfile: contents of a DER-encoded file that contains the private
-            key.
-        @return: a PrivateKey object
-
-        First let's construct a DER encoded key:
-
-        >>> import base64
-        >>> b64der = 'MC4CAQACBQDeKYlRAgMBAAECBQDHn4npAgMA/icCAwDfxwIDANcXAgInbwIDAMZt'
-        >>> der = base64.decodestring(b64der)
-
-        This loads the file:
-
-        >>> PrivateKey._load_pkcs1_der(der)
-        PrivateKey(3727264081, 65537, 3349121513, 65063, 57287)
-
-        '''
-
-        from pyasn1.codec.der import decoder
-        (priv, _) = decoder.decode(keyfile)
-
-        # ASN.1 contents of DER encoded private key:
-        #
-        # RSAPrivateKey ::= SEQUENCE {
-        #     version           Version, 
-        #     modulus           INTEGER,  -- n
-        #     publicExponent    INTEGER,  -- e
-        #     privateExponent   INTEGER,  -- d
-        #     prime1            INTEGER,  -- p
-        #     prime2            INTEGER,  -- q
-        #     exponent1         INTEGER,  -- d mod (p-1)
-        #     exponent2         INTEGER,  -- d mod (q-1) 
-        #     coefficient       INTEGER,  -- (inverse of q) mod p
-        #     otherPrimeInfos   OtherPrimeInfos OPTIONAL 
-        # }
-
-        if priv[0] != 0:
-            raise ValueError('Unable to read this file, version %s != 0' % priv[0])
-
-        as_ints = tuple(int(x) for x in priv[1:9])
-        return cls(*as_ints)
-
-    def _save_pkcs1_der(self):
-        '''Saves the private key in PKCS#1 DER format.
-
-        @returns: the DER-encoded private key.
-        '''
-
-        from pyasn1.type import univ, namedtype
-        from pyasn1.codec.der import encoder
-
-        class AsnPrivKey(univ.Sequence):
-            componentType = namedtype.NamedTypes(
-                namedtype.NamedType('version', univ.Integer()),
-                namedtype.NamedType('modulus', univ.Integer()),
-                namedtype.NamedType('publicExponent', univ.Integer()),
-                namedtype.NamedType('privateExponent', univ.Integer()),
-                namedtype.NamedType('prime1', univ.Integer()),
-                namedtype.NamedType('prime2', univ.Integer()),
-                namedtype.NamedType('exponent1', univ.Integer()),
-                namedtype.NamedType('exponent2', univ.Integer()),
-                namedtype.NamedType('coefficient', univ.Integer()),
-            )
-
-        # Create the ASN object
-        asn_key = AsnPrivKey()
-        asn_key.setComponentByName('version', 0)
-        asn_key.setComponentByName('modulus', self.n)
-        asn_key.setComponentByName('publicExponent', self.e)
-        asn_key.setComponentByName('privateExponent', self.d)
-        asn_key.setComponentByName('prime1', self.p)
-        asn_key.setComponentByName('prime2', self.q)
-        asn_key.setComponentByName('exponent1', self.exp1)
-        asn_key.setComponentByName('exponent2', self.exp2)
-        asn_key.setComponentByName('coefficient', self.coef)
-
-        return encoder.encode(asn_key)
-
-    @classmethod
-    def _load_pkcs1_pem(cls, keyfile):
-        '''Loads a PKCS#1 PEM-encoded private key file.
-
-        The contents of the file before the "-----BEGIN RSA PRIVATE KEY-----" and
-        after the "-----END RSA PRIVATE KEY-----" lines is ignored.
-
-        @param keyfile: contents of a PEM-encoded file that contains the private
-            key.
-        @return: a PrivateKey object
-        '''
-
-        der = rsa.pem.load_pem(keyfile, b('RSA PRIVATE KEY'))
-        return cls._load_pkcs1_der(der)
-
-    def _save_pkcs1_pem(self):
-        '''Saves a PKCS#1 PEM-encoded private key file.
-
-        @return: contents of a PEM-encoded file that contains the private key.
-        '''
-
-        der = self._save_pkcs1_der()
-        return rsa.pem.save_pem(der, b('RSA PRIVATE KEY'))
-
-def find_p_q(nbits, getprime_func=rsa.prime.getprime, accurate=True):
-    ''''Returns a tuple of two different primes of nbits bits each.
-    
-    The resulting p * q has exacty 2 * nbits bits, and the returned p and q
-    will not be equal.
-
-    :param nbits: the number of bits in each of p and q.
-    :param getprime_func: the getprime function, defaults to
-        :py:func:`rsa.prime.getprime`.
-
-        *Introduced in Python-RSA 3.1*
-
-    :param accurate: whether to enable accurate mode or not.
-    :returns: (p, q), where p > q
-
-    >>> (p, q) = find_p_q(128)
-    >>> from rsa import common
-    >>> common.bit_size(p * q)
-    256
-
-    When not in accurate mode, the number of bits can be slightly less
-
-    >>> (p, q) = find_p_q(128, accurate=False)
-    >>> from rsa import common
-    >>> common.bit_size(p * q) <= 256
-    True
-    >>> common.bit_size(p * q) > 240
-    True
-    
-    '''
-    
-    total_bits = nbits * 2
-
-    # Make sure that p and q aren't too close or the factoring programs can
-    # factor n.
-    shift = nbits // 16
-    pbits = nbits + shift
-    qbits = nbits - shift
-    
-    # Choose the two initial primes
-    log.debug('find_p_q(%i): Finding p', nbits)
-    p = getprime_func(pbits)
-    log.debug('find_p_q(%i): Finding q', nbits)
-    q = getprime_func(qbits)
-
-    def is_acceptable(p, q):
-        '''Returns True iff p and q are acceptable:
-            
-            - p and q differ
-            - (p * q) has the right nr of bits (when accurate=True)
-        '''
-
-        if p == q:
-            return False
-
-        if not accurate:
-            return True
-
-        # Make sure we have just the right amount of bits
-        found_size = rsa.common.bit_size(p * q)
-        return total_bits == found_size
-
-    # Keep choosing other primes until they match our requirements.
-    change_p = False
-    while not is_acceptable(p, q):
-        # Change p on one iteration and q on the other
-        if change_p:
-            p = getprime_func(pbits)
-        else:
-            q = getprime_func(qbits)
-
-        change_p = not change_p
-
-    # We want p > q as described on
-    # http://www.di-mgt.com.au/rsa_alg.html#crt
-    return (max(p, q), min(p, q))
-
-def calculate_keys(p, q, nbits):
-    '''Calculates an encryption and a decryption key given p and q, and
-    returns them as a tuple (e, d)
-
-    '''
-
-    phi_n = (p - 1) * (q - 1)
-
-    # A very common choice for e is 65537
-    e = 65537
-
-    try:
-        d = rsa.common.inverse(e, phi_n)
-    except ValueError:
-        raise ValueError("e (%d) and phi_n (%d) are not relatively prime" %
-                (e, phi_n))
-
-    if (e * d) % phi_n != 1:
-        raise ValueError("e (%d) and d (%d) are not mult. inv. modulo "
-                "phi_n (%d)" % (e, d, phi_n))
-
-    return (e, d)
-
-def gen_keys(nbits, getprime_func, accurate=True):
-    '''Generate RSA keys of nbits bits. Returns (p, q, e, d).
-
-    Note: this can take a long time, depending on the key size.
-    
-    :param nbits: the total number of bits in ``p`` and ``q``. Both ``p`` and
-        ``q`` will use ``nbits/2`` bits.
-    :param getprime_func: either :py:func:`rsa.prime.getprime` or a function
-        with similar signature.
-    '''
-
-    (p, q) = find_p_q(nbits // 2, getprime_func, accurate)
-    (e, d) = calculate_keys(p, q, nbits // 2)
-
-    return (p, q, e, d)
-
-def newkeys(nbits, accurate=True, poolsize=1):
-    '''Generates public and private keys, and returns them as (pub, priv).
-
-    The public key is also known as the 'encryption key', and is a
-    :py:class:`rsa.PublicKey` object. The private key is also known as the
-    'decryption key' and is a :py:class:`rsa.PrivateKey` object.
-
-    :param nbits: the number of bits required to store ``n = p*q``.
-    :param accurate: when True, ``n`` will have exactly the number of bits you
-        asked for. However, this makes key generation much slower. When False,
-        `n`` may have slightly less bits.
-    :param poolsize: the number of processes to use to generate the prime
-        numbers. If set to a number > 1, a parallel algorithm will be used.
-        This requires Python 2.6 or newer.
-
-    :returns: a tuple (:py:class:`rsa.PublicKey`, :py:class:`rsa.PrivateKey`)
-
-    The ``poolsize`` parameter was added in *Python-RSA 3.1* and requires
-    Python 2.6 or newer.
-    
-    '''
-
-    if nbits < 16:
-        raise ValueError('Key too small')
-
-    if poolsize < 1:
-        raise ValueError('Pool size (%i) should be >= 1' % poolsize)
-
-    # Determine which getprime function to use
-    if poolsize > 1:
-        from rsa import parallel
-        import functools
-
-        getprime_func = functools.partial(parallel.getprime, poolsize=poolsize)
-    else: getprime_func = rsa.prime.getprime
-
-    # Generate the key components
-    (p, q, e, d) = gen_keys(nbits, getprime_func)
-    
-    # Create the key objects
-    n = p * q
-
-    return (
-        PublicKey(n, e),
-        PrivateKey(n, e, d, p, q)
-    )
-
-__all__ = ['PublicKey', 'PrivateKey', 'newkeys']
-
-if __name__ == '__main__':
-    import doctest
-    
-    try:
-        for count in range(100):
-            (failures, tests) = doctest.testmod()
-            if failures:
-                break
-
-            if (count and count % 10 == 0) or count == 1:
-                print('%i times' % count)
-    except KeyboardInterrupt:
-        print('Aborted')
-    else:
-        print('Doctests done')

rsa/parallel.py

@@ -1,94 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-'''Functions for parallel computation on multiple cores.
-
-Introduced in Python-RSA 3.1.
-
-.. note::
-
-    Requires Python 2.6 or newer.
-
-'''
-
-from __future__ import print_function
-
-import multiprocessing as mp
-
-import rsa.prime
-import rsa.randnum
-
-def _find_prime(nbits, pipe):
-    while True:
-        integer = rsa.randnum.read_random_int(nbits)
-
-        # Make sure it's odd
-        integer |= 1
-
-        # Test for primeness
-        if rsa.prime.is_prime(integer):
-            pipe.send(integer)
-            return
-
-def getprime(nbits, poolsize):
-    '''Returns a prime number that can be stored in 'nbits' bits.
-
-    Works in multiple threads at the same time.
-
-    >>> p = getprime(128, 3)
-    >>> rsa.prime.is_prime(p-1)
-    False
-    >>> rsa.prime.is_prime(p)
-    True
-    >>> rsa.prime.is_prime(p+1)
-    False
-    
-    >>> from rsa import common
-    >>> common.bit_size(p) == 128
-    True
-    
-    '''
-
-    (pipe_recv, pipe_send) = mp.Pipe(duplex=False)
-
-    # Create processes
-    procs = [mp.Process(target=_find_prime, args=(nbits, pipe_send))
-             for _ in range(poolsize)]
-    [p.start() for p in procs]
-
-    result = pipe_recv.recv()
-
-    [p.terminate() for p in procs]
-
-    return result
-
-__all__ = ['getprime']
-
-    
-if __name__ == '__main__':
-    print('Running doctests 1000x or until failure')
-    import doctest
-    
-    for count in range(100):
-        (failures, tests) = doctest.testmod()
-        if failures:
-            break
-        
-        if count and count % 10 == 0:
-            print('%i times' % count)
-    
-    print('Doctests done')
-

rsa/pem.py

@@ -1,120 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-'''Functions that load and write PEM-encoded files.'''
-
-import base64
-from rsa._compat import b, is_bytes
-
-def _markers(pem_marker):
-    '''
-    Returns the start and end PEM markers
-    '''
-
-    if is_bytes(pem_marker):
-        pem_marker = pem_marker.decode('utf-8')
-
-    return (b('-----BEGIN %s-----' % pem_marker),
-            b('-----END %s-----' % pem_marker))
-
-def load_pem(contents, pem_marker):
-    '''Loads a PEM file.
-
-    @param contents: the contents of the file to interpret
-    @param pem_marker: the marker of the PEM content, such as 'RSA PRIVATE KEY'
-        when your file has '-----BEGIN RSA PRIVATE KEY-----' and
-        '-----END RSA PRIVATE KEY-----' markers.
-
-    @return the base64-decoded content between the start and end markers.
-
-    @raise ValueError: when the content is invalid, for example when the start
-        marker cannot be found.
-
-    '''
-
-    (pem_start, pem_end) = _markers(pem_marker)
-
-    pem_lines = []
-    in_pem_part = False
-
-    for line in contents.splitlines():
-        line = line.strip()
-
-        # Skip empty lines
-        if not line:
-            continue
-
-        # Handle start marker
-        if line == pem_start:
-            if in_pem_part:
-                raise ValueError('Seen start marker "%s" twice' % pem_start)
-
-            in_pem_part = True
-            continue
-
-        # Skip stuff before first marker
-        if not in_pem_part:
-            continue
-
-        # Handle end marker
-        if in_pem_part and line == pem_end:
-            in_pem_part = False
-            break
-
-        # Load fields
-        if b(':') in line:
-            continue
-
-        pem_lines.append(line)
-
-    # Do some sanity checks
-    if not pem_lines:
-        raise ValueError('No PEM start marker "%s" found' % pem_start)
-
-    if in_pem_part:
-        raise ValueError('No PEM end marker "%s" found' % pem_end)
-
-    # Base64-decode the contents
-    pem = b('').join(pem_lines)
-    return base64.decodestring(pem)
-
-
-def save_pem(contents, pem_marker):
-    '''Saves a PEM file.
-
-    @param contents: the contents to encode in PEM format
-    @param pem_marker: the marker of the PEM content, such as 'RSA PRIVATE KEY'
-        when your file has '-----BEGIN RSA PRIVATE KEY-----' and
-        '-----END RSA PRIVATE KEY-----' markers.
-
-    @return the base64-encoded content between the start and end markers.
-
-    '''
-
-    (pem_start, pem_end) = _markers(pem_marker)
-
-    b64 = base64.encodestring(contents).replace(b('\n'), b(''))
-    pem_lines = [pem_start]
-    
-    for block_start in range(0, len(b64), 64):
-        block = b64[block_start:block_start + 64]
-        pem_lines.append(block)
-
-    pem_lines.append(pem_end)
-    pem_lines.append(b(''))
-
-    return b('\n').join(pem_lines)
-    

rsa/pkcs1.py

@@ -1,389 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-'''Functions for PKCS#1 version 1.5 encryption and signing
-
-This module implements certain functionality from PKCS#1 version 1.5. For a
-very clear example, read http://www.di-mgt.com.au/rsa_alg.html#pkcs1schemes
-
-At least 8 bytes of random padding is used when encrypting a message. This makes
-these methods much more secure than the ones in the ``rsa`` module.
-
-WARNING: this module leaks information when decryption or verification fails.
-The exceptions that are raised contain the Python traceback information, which
-can be used to deduce where in the process the failure occurred. DO NOT PASS
-SUCH INFORMATION to your users.
-'''
-
-import hashlib
-import os
-
-from rsa._compat import b
-from rsa import common, transform, core, varblock
-
-# ASN.1 codes that describe the hash algorithm used.
-HASH_ASN1 = {
-    'MD5': b('\x30\x20\x30\x0c\x06\x08\x2a\x86\x48\x86\xf7\x0d\x02\x05\x05\x00\x04\x10'),
-    'SHA-1': b('\x30\x21\x30\x09\x06\x05\x2b\x0e\x03\x02\x1a\x05\x00\x04\x14'),
-    'SHA-256': b('\x30\x31\x30\x0d\x06\x09\x60\x86\x48\x01\x65\x03\x04\x02\x01\x05\x00\x04\x20'),
-    'SHA-384': b('\x30\x41\x30\x0d\x06\x09\x60\x86\x48\x01\x65\x03\x04\x02\x02\x05\x00\x04\x30'),
-    'SHA-512': b('\x30\x51\x30\x0d\x06\x09\x60\x86\x48\x01\x65\x03\x04\x02\x03\x05\x00\x04\x40'),
-}
-
-HASH_METHODS = {
-    'MD5': hashlib.md5,
-    'SHA-1': hashlib.sha1,
-    'SHA-256': hashlib.sha256,
-    'SHA-384': hashlib.sha384,
-    'SHA-512': hashlib.sha512,
-}
-
-class CryptoError(Exception):
-    '''Base class for all exceptions in this module.'''
-
-class DecryptionError(CryptoError):
-    '''Raised when decryption fails.'''
-
-class VerificationError(CryptoError):
-    '''Raised when verification fails.'''
- 
-def _pad_for_encryption(message, target_length):
-    r'''Pads the message for encryption, returning the padded message.
-    
-    :return: 00 02 RANDOM_DATA 00 MESSAGE
-    
-    >>> block = _pad_for_encryption('hello', 16)
-    >>> len(block)
-    16
-    >>> block[0:2]
-    '\x00\x02'
-    >>> block[-6:]
-    '\x00hello'
-
-    '''
-
-    max_msglength = target_length - 11
-    msglength = len(message)
-    
-    if msglength > max_msglength:
-        raise OverflowError('%i bytes needed for message, but there is only'
-            ' space for %i' % (msglength, max_msglength))
-    
-    # Get random padding
-    padding = b('')
-    padding_length = target_length - msglength - 3
-    
-    # We remove 0-bytes, so we'll end up with less padding than we've asked for,
-    # so keep adding data until we're at the correct length.
-    while len(padding) < padding_length:
-        needed_bytes = padding_length - len(padding)
-        
-        # Always read at least 8 bytes more than we need, and trim off the rest
-        # after removing the 0-bytes. This increases the chance of getting
-        # enough bytes, especially when needed_bytes is small
-        new_padding = os.urandom(needed_bytes + 5)
-        new_padding = new_padding.replace(b('\x00'), b(''))
-        padding = padding + new_padding[:needed_bytes]
-    
-    assert len(padding) == padding_length
-    
-    return b('').join([b('\x00\x02'),
-                    padding,
-                    b('\x00'),
-                    message])
-    
-
-def _pad_for_signing(message, target_length):
-    r'''Pads the message for signing, returning the padded message.
-    
-    The padding is always a repetition of FF bytes.
-    
-    :return: 00 01 PADDING 00 MESSAGE
-    
-    >>> block = _pad_for_signing('hello', 16)
-    >>> len(block)
-    16
-    >>> block[0:2]
-    '\x00\x01'
-    >>> block[-6:]
-    '\x00hello'
-    >>> block[2:-6]
-    '\xff\xff\xff\xff\xff\xff\xff\xff'
-    
-    '''
-
-    max_msglength = target_length - 11
-    msglength = len(message)
-    
-    if msglength > max_msglength:
-        raise OverflowError('%i bytes needed for message, but there is only'
-            ' space for %i' % (msglength, max_msglength))
-    
-    padding_length = target_length - msglength - 3
-    
-    return b('').join([b('\x00\x01'),
-                    padding_length * b('\xff'),
-                    b('\x00'),
-                    message])
-    
-    
-def encrypt(message, pub_key):
-    '''Encrypts the given message using PKCS#1 v1.5
-    
-    :param message: the message to encrypt. Must be a byte string no longer than
-        ``k-11`` bytes, where ``k`` is the number of bytes needed to encode
-        the ``n`` component of the public key.
-    :param pub_key: the :py:class:`rsa.PublicKey` to encrypt with.
-    :raise OverflowError: when the message is too large to fit in the padded
-        block.
-        
-    >>> from rsa import key, common
-    >>> (pub_key, priv_key) = key.newkeys(256)
-    >>> message = 'hello'
-    >>> crypto = encrypt(message, pub_key)
-    
-    The crypto text should be just as long as the public key 'n' component:
-
-    >>> len(crypto) == common.byte_size(pub_key.n)
-    True
-    
-    '''
-    
-    keylength = common.byte_size(pub_key.n)
-    padded = _pad_for_encryption(message, keylength)
-    
-    payload = transform.bytes2int(padded)
-    encrypted = core.encrypt_int(payload, pub_key.e, pub_key.n)
-    block = transform.int2bytes(encrypted, keylength)
-    
-    return block
-
-def decrypt(crypto, priv_key):
-    r'''Decrypts the given message using PKCS#1 v1.5
-    
-    The decryption is considered 'failed' when the resulting cleartext doesn't
-    start with the bytes 00 02, or when the 00 byte between the padding and
-    the message cannot be found.
-    
-    :param crypto: the crypto text as returned by :py:func:`rsa.encrypt`
-    :param priv_key: the :py:class:`rsa.PrivateKey` to decrypt with.
-    :raise DecryptionError: when the decryption fails. No details are given as
-        to why the code thinks the decryption fails, as this would leak
-        information about the private key.
-
-
-    >>> import rsa
-    >>> (pub_key, priv_key) = rsa.newkeys(256)
-
-    It works with strings:
-
-    >>> crypto = encrypt('hello', pub_key)
-    >>> decrypt(crypto, priv_key)
-    'hello'
-    
-    And with binary data:
-
-    >>> crypto = encrypt('\x00\x00\x00\x00\x01', pub_key)
-    >>> decrypt(crypto, priv_key)
-    '\x00\x00\x00\x00\x01'
-
-    Altering the encrypted information will *likely* cause a
-    :py:class:`rsa.pkcs1.DecryptionError`. If you want to be *sure*, use
-    :py:func:`rsa.sign`.
-
-
-    .. warning::
-
-        Never display the stack trace of a
-        :py:class:`rsa.pkcs1.DecryptionError` exception. It shows where in the
-        code the exception occurred, and thus leaks information about the key.
-        It's only a tiny bit of information, but every bit makes cracking the
-        keys easier.
-
-    >>> crypto = encrypt('hello', pub_key)
-    >>> crypto = crypto[0:5] + 'X' + crypto[6:] # change a byte
-    >>> decrypt(crypto, priv_key)
-    Traceback (most recent call last):
-    ...
-    DecryptionError: Decryption failed
-
-    '''
-    
-    blocksize = common.byte_size(priv_key.n)
-    encrypted = transform.bytes2int(crypto)
-    decrypted = core.decrypt_int(encrypted, priv_key.d, priv_key.n)
-    cleartext = transform.int2bytes(decrypted, blocksize)
-
-    # If we can't find the cleartext marker, decryption failed.
-    if cleartext[0:2] != b('\x00\x02'):
-        raise DecryptionError('Decryption failed')
-    
-    # Find the 00 separator between the padding and the message
-    try:
-        sep_idx = cleartext.index(b('\x00'), 2)
-    except ValueError:
-        raise DecryptionError('Decryption failed')
-    
-    return cleartext[sep_idx+1:]
-    
-def sign(message, priv_key, hash):
-    '''Signs the message with the private key.
-
-    Hashes the message, then signs the hash with the given key. This is known
-    as a "detached signature", because the message itself isn't altered.
-    
-    :param message: the message to sign. Can be an 8-bit string or a file-like
-        object. If ``message`` has a ``read()`` method, it is assumed to be a
-        file-like object.
-    :param priv_key: the :py:class:`rsa.PrivateKey` to sign with
-    :param hash: the hash method used on the message. Use 'MD5', 'SHA-1',
-        'SHA-256', 'SHA-384' or 'SHA-512'.
-    :return: a message signature block.
-    :raise OverflowError: if the private key is too small to contain the
-        requested hash.
-
-    '''
-
-    # Get the ASN1 code for this hash method
-    if hash not in HASH_ASN1:
-        raise ValueError('Invalid hash method: %s' % hash)
-    asn1code = HASH_ASN1[hash]
-    
-    # Calculate the hash
-    hash = _hash(message, hash)
-
-    # Encrypt the hash with the private key
-    cleartext = asn1code + hash
-    keylength = common.byte_size(priv_key.n)
-    padded = _pad_for_signing(cleartext, keylength)
-    
-    payload = transform.bytes2int(padded)
-    encrypted = core.encrypt_int(payload, priv_key.d, priv_key.n)
-    block = transform.int2bytes(encrypted, keylength)
-    
-    return block
-
-def verify(message, signature, pub_key):
-    '''Verifies that the signature matches the message.
-    
-    The hash method is detected automatically from the signature.
-    
-    :param message: the signed message. Can be an 8-bit string or a file-like
-        object. If ``message`` has a ``read()`` method, it is assumed to be a
-        file-like object.
-    :param signature: the signature block, as created with :py:func:`rsa.sign`.
-    :param pub_key: the :py:class:`rsa.PublicKey` of the person signing the message.
-    :raise VerificationError: when the signature doesn't match the message.
-
-    .. warning::
-
-        Never display the stack trace of a
-        :py:class:`rsa.pkcs1.VerificationError` exception. It shows where in
-        the code the exception occurred, and thus leaks information about the
-        key. It's only a tiny bit of information, but every bit makes cracking
-        the keys easier.
-
-    '''
-    
-    blocksize = common.byte_size(pub_key.n)
-    encrypted = transform.bytes2int(signature)
-    decrypted = core.decrypt_int(encrypted, pub_key.e, pub_key.n)
-    clearsig = transform.int2bytes(decrypted, blocksize)
-
-    # If we can't find the signature  marker, verification failed.
-    if clearsig[0:2] != b('\x00\x01'):
-        raise VerificationError('Verification failed')
-    
-    # Find the 00 separator between the padding and the payload
-    try:
-        sep_idx = clearsig.index(b('\x00'), 2)
-    except ValueError:
-        raise VerificationError('Verification failed')
-    
-    # Get the hash and the hash method
-    (method_name, signature_hash) = _find_method_hash(clearsig[sep_idx+1:])
-    message_hash = _hash(message, method_name)
-
-    # Compare the real hash to the hash in the signature
-    if message_hash != signature_hash:
-        raise VerificationError('Verification failed')
-
-def _hash(message, method_name):
-    '''Returns the message digest.
-    
-    :param message: the signed message. Can be an 8-bit string or a file-like
-        object. If ``message`` has a ``read()`` method, it is assumed to be a
-        file-like object.
-    :param method_name: the hash method, must be a key of
-        :py:const:`HASH_METHODS`.
-    
-    '''
-
-    if method_name not in HASH_METHODS:
-        raise ValueError('Invalid hash method: %s' % method_name)
-    
-    method = HASH_METHODS[method_name]
-    hasher = method()
-
-    if hasattr(message, 'read') and hasattr(message.read, '__call__'):
-        # read as 1K blocks
-        for block in varblock.yield_fixedblocks(message, 1024):
-            hasher.update(block)
-    else:
-        # hash the message object itself.
-        hasher.update(message)
-
-    return hasher.digest()
-
-
-def _find_method_hash(method_hash):
-    '''Finds the hash method and the hash itself.
-    
-    :param method_hash: ASN1 code for the hash method concatenated with the
-        hash itself.
-    
-    :return: tuple (method, hash) where ``method`` is the used hash method, and
-        ``hash`` is the hash itself.
-    
-    :raise VerificationFailed: when the hash method cannot be found
-
-    '''
-
-    for (hashname, asn1code) in HASH_ASN1.items():
-        if not method_hash.startswith(asn1code):
-            continue
-        
-        return (hashname, method_hash[len(asn1code):])
-    
-    raise VerificationError('Verification failed')
-
-
-__all__ = ['encrypt', 'decrypt', 'sign', 'verify',
-           'DecryptionError', 'VerificationError', 'CryptoError']
-
-if __name__ == '__main__':
-    print('Running doctests 1000x or until failure')
-    import doctest
-    
-    for count in range(1000):
-        (failures, tests) = doctest.testmod()
-        if failures:
-            break
-        
-        if count and count % 100 == 0:
-            print('%i times' % count)
-    
-    print('Doctests done')

rsa/prime.py

@@ -1,166 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-'''Numerical functions related to primes.
-
-Implementation based on the book Algorithm Design by Michael T. Goodrich and
-Roberto Tamassia, 2002.
-'''
-
-__all__ = [ 'getprime', 'are_relatively_prime']
-
-import rsa.randnum
-
-def gcd(p, q):
-    '''Returns the greatest common divisor of p and q
-
-    >>> gcd(48, 180)
-    12
-    '''
-
-    while q != 0:
-        if p < q: (p,q) = (q,p)
-        (p,q) = (q, p % q)
-    return p
-    
-
-def jacobi(a, b):
-    '''Calculates the value of the Jacobi symbol (a/b) where both a and b are
-    positive integers, and b is odd
-
-    :returns: -1, 0 or 1
-    '''
-
-    assert a > 0
-    assert b > 0
-
-    if a == 0: return 0
-    result = 1
-    while a > 1:
-        if a & 1:
-            if ((a-1)*(b-1) >> 2) & 1:
-                result = -result
-            a, b = b % a, a
-        else:
-            if (((b * b) - 1) >> 3) & 1:
-                result = -result
-            a >>= 1
-    if a == 0: return 0
-    return result
-
-def jacobi_witness(x, n):
-    '''Returns False if n is an Euler pseudo-prime with base x, and
-    True otherwise.
-    '''
-
-    j = jacobi(x, n) % n
-
-    f = pow(x, n >> 1, n)
-
-    if j == f: return False
-    return True
-
-def randomized_primality_testing(n, k):
-    '''Calculates whether n is composite (which is always correct) or
-    prime (which is incorrect with error probability 2**-k)
-
-    Returns False if the number is composite, and True if it's
-    probably prime.
-    '''
-
-    # 50% of Jacobi-witnesses can report compositness of non-prime numbers
-
-    # The implemented algorithm using the Jacobi witness function has error
-    # probability q <= 0.5, according to Goodrich et. al
-    #
-    # q = 0.5
-    # t = int(math.ceil(k / log(1 / q, 2)))
-    # So t = k / log(2, 2) = k / 1 = k
-    # this means we can use range(k) rather than range(t)
-
-    for _ in range(k):
-        x = rsa.randnum.randint(n-1)
-        if jacobi_witness(x, n): return False
-    
-    return True
-
-def is_prime(number):
-    '''Returns True if the number is prime, and False otherwise.
-
-    >>> is_prime(42)
-    False
-    >>> is_prime(41)
-    True
-    '''
-
-    return randomized_primality_testing(number, 6)
-
-def getprime(nbits):
-    '''Returns a prime number that can be stored in 'nbits' bits.
-
-    >>> p = getprime(128)
-    >>> is_prime(p-1)
-    False
-    >>> is_prime(p)
-    True
-    >>> is_prime(p+1)
-    False
-    
-    >>> from rsa import common
-    >>> common.bit_size(p) == 128
-    True
-    
-    '''
-
-    while True:
-        integer = rsa.randnum.read_random_int(nbits)
-
-        # Make sure it's odd
-        integer |= 1
-
-        # Test for primeness
-        if is_prime(integer):
-            return integer
-
-        # Retry if not prime
-
-
-def are_relatively_prime(a, b):
-    '''Returns True if a and b are relatively prime, and False if they
-    are not.
-
-    >>> are_relatively_prime(2, 3)
-    1
-    >>> are_relatively_prime(2, 4)
-    0
-    '''
-
-    d = gcd(a, b)
-    return (d == 1)
-    
-if __name__ == '__main__':
-    print('Running doctests 1000x or until failure')
-    import doctest
-    
-    for count in range(1000):
-        (failures, tests) = doctest.testmod()
-        if failures:
-            break
-        
-        if count and count % 100 == 0:
-            print('%i times' % count)
-    
-    print('Doctests done')

rsa/randnum.py

@@ -1,85 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-'''Functions for generating random numbers.'''
-
-# Source inspired by code by Yesudeep Mangalapilly <yesudeep@gmail.com>
-
-import os
-
-from rsa import common, transform
-from rsa._compat import byte
-
-def read_random_bits(nbits):
-    '''Reads 'nbits' random bits.
-
-    If nbits isn't a whole number of bytes, an extra byte will be appended with
-    only the lower bits set.
-    '''
-
-    nbytes, rbits = divmod(nbits, 8)
-
-    # Get the random bytes
-    randomdata = os.urandom(nbytes)
-
-    # Add the remaining random bits
-    if rbits > 0:
-        randomvalue = ord(os.urandom(1))
-        randomvalue >>= (8 - rbits)
-        randomdata = byte(randomvalue) + randomdata
-
-    return randomdata
-
-
-def read_random_int(nbits):
-    '''Reads a random integer of approximately nbits bits.
-    '''
-
-    randomdata = read_random_bits(nbits)
-    value = transform.bytes2int(randomdata)
-
-    # Ensure that the number is large enough to just fill out the required
-    # number of bits.
-    value |= 1 << (nbits - 1)
-
-    return value
-
-def randint(maxvalue):
-    '''Returns a random integer x with 1 <= x <= maxvalue
-    
-    May take a very long time in specific situations. If maxvalue needs N bits
-    to store, the closer maxvalue is to (2 ** N) - 1, the faster this function
-    is.
-    '''
-
-    bit_size = common.bit_size(maxvalue)
-
-    tries = 0
-    while True:
-        value = read_random_int(bit_size)
-        if value <= maxvalue:
-            break
-
-        if tries and tries % 10 == 0:
-            # After a lot of tries to get the right number of bits but still
-            # smaller than maxvalue, decrease the number of bits by 1. That'll
-            # dramatically increase the chances to get a large enough number.
-            bit_size -= 1
-        tries += 1
-
-    return value
-
-

rsa/transform.py

@@ -1,220 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-'''Data transformation functions.
-
-From bytes to a number, number to bytes, etc.
-'''
-
-from __future__ import absolute_import
-
-try:
-    # We'll use psyco if available on 32-bit architectures to speed up code.
-    # Using psyco (if available) cuts down the execution time on Python 2.5
-    # at least by half.
-    import psyco
-    psyco.full()
-except ImportError:
-    pass
-
-import binascii
-from struct import pack
-from rsa import common
-from rsa._compat import is_integer, b, byte, get_word_alignment, ZERO_BYTE, EMPTY_BYTE
-
-
-def bytes2int(raw_bytes):
-    r'''Converts a list of bytes or an 8-bit string to an integer.
-
-    When using unicode strings, encode it to some encoding like UTF8 first.
-
-    >>> (((128 * 256) + 64) * 256) + 15
-    8405007
-    >>> bytes2int('\x80@\x0f')
-    8405007
-
-    '''
-
-    return int(binascii.hexlify(raw_bytes), 16)
-
-
-def _int2bytes(number, block_size=None):
-    r'''Converts a number to a string of bytes.
-
-    Usage::
-
-        >>> _int2bytes(123456789)
-        '\x07[\xcd\x15'
-        >>> bytes2int(_int2bytes(123456789))
-        123456789
-
-        >>> _int2bytes(123456789, 6)
-        '\x00\x00\x07[\xcd\x15'
-        >>> bytes2int(_int2bytes(123456789, 128))
-        123456789
-
-        >>> _int2bytes(123456789, 3)
-        Traceback (most recent call last):
-        ...
-        OverflowError: Needed 4 bytes for number, but block size is 3
-
-    @param number: the number to convert
-    @param block_size: the number of bytes to output. If the number encoded to
-        bytes is less than this, the block will be zero-padded. When not given,
-        the returned block is not padded.
-
-    @throws OverflowError when block_size is given and the number takes up more
-        bytes than fit into the block.
-    '''
-    # Type checking
-    if not is_integer(number):
-        raise TypeError("You must pass an integer for 'number', not %s" %
-            number.__class__)
-
-    if number < 0:
-        raise ValueError('Negative numbers cannot be used: %i' % number)
-
-    # Do some bounds checking
-    if number == 0:
-        needed_bytes = 1
-        raw_bytes = [ZERO_BYTE]
-    else:
-        needed_bytes = common.byte_size(number)
-        raw_bytes = []
-
-    # You cannot compare None > 0 in Python 3x. It will fail with a TypeError.
-    if block_size and block_size > 0:
-        if needed_bytes > block_size:
-            raise OverflowError('Needed %i bytes for number, but block size '
-                'is %i' % (needed_bytes, block_size))
-
-    # Convert the number to bytes.
-    while number > 0:
-        raw_bytes.insert(0, byte(number & 0xFF))
-        number >>= 8
-
-    # Pad with zeroes to fill the block
-    if block_size and block_size > 0:
-        padding = (block_size - needed_bytes) * ZERO_BYTE
-    else:
-        padding = EMPTY_BYTE
-
-    return padding + EMPTY_BYTE.join(raw_bytes)
-
-
-def bytes_leading(raw_bytes, needle=ZERO_BYTE):
-    '''
-    Finds the number of prefixed byte occurrences in the haystack.
-
-    Useful when you want to deal with padding.
-
-    :param raw_bytes:
-        Raw bytes.
-    :param needle:
-        The byte to count. Default \000.
-    :returns:
-        The number of leading needle bytes.
-    '''
-    leading = 0
-    # Indexing keeps compatibility between Python 2.x and Python 3.x
-    _byte = needle[0]
-    for x in raw_bytes:
-        if x == _byte:
-            leading += 1
-        else:
-            break
-    return leading
-
-
-def int2bytes(number, fill_size=None, chunk_size=None, overflow=False):
-    '''
-    Convert an unsigned integer to bytes (base-256 representation)::
-
-    Does not preserve leading zeros if you don't specify a chunk size or
-    fill size.
-
-    .. NOTE:
-        You must not specify both fill_size and chunk_size. Only one
-        of them is allowed.
-
-    :param number:
-        Integer value
-    :param fill_size:
-        If the optional fill size is given the length of the resulting
-        byte string is expected to be the fill size and will be padded
-        with prefix zero bytes to satisfy that length.
-    :param chunk_size:
-        If optional chunk size is given and greater than zero, pad the front of
-        the byte string with binary zeros so that the length is a multiple of
-        ``chunk_size``.
-    :param overflow:
-        ``False`` (default). If this is ``True``, no ``OverflowError``
-        will be raised when the fill_size is shorter than the length
-        of the generated byte sequence. Instead the byte sequence will
-        be returned as is.
-    :returns:
-        Raw bytes (base-256 representation).
-    :raises:
-        ``OverflowError`` when fill_size is given and the number takes up more
-        bytes than fit into the block. This requires the ``overflow``
-        argument to this function to be set to ``False`` otherwise, no
-        error will be raised.
-    '''
-    if number < 0:
-        raise ValueError("Number must be an unsigned integer: %d" % number)
-
-    if fill_size and chunk_size:
-        raise ValueError("You can either fill or pad chunks, but not both")
-
-    # Ensure these are integers.
-    number & 1
-
-    raw_bytes = b('')
-
-    # Pack the integer one machine word at a time into bytes.
-    num = number
-    word_bits, _, max_uint, pack_type = get_word_alignment(num)
-    pack_format = ">%s" % pack_type
-    while num > 0:
-        raw_bytes = pack(pack_format, num & max_uint) + raw_bytes
-        num >>= word_bits
-    # Obtain the index of the first non-zero byte.
-    zero_leading = bytes_leading(raw_bytes)
-    if number == 0:
-        raw_bytes = ZERO_BYTE
-    # De-padding.
-    raw_bytes = raw_bytes[zero_leading:]
-
-    length = len(raw_bytes)
-    if fill_size and fill_size > 0:
-        if not overflow and length > fill_size:
-            raise OverflowError(
-                "Need %d bytes for number, but fill size is %d" %
-                (length, fill_size)
-            )
-        raw_bytes = raw_bytes.rjust(fill_size, ZERO_BYTE)
-    elif chunk_size and chunk_size > 0:
-        remainder = length % chunk_size
-        if remainder:
-            padding_size = chunk_size - remainder
-            raw_bytes = raw_bytes.rjust(length + padding_size, ZERO_BYTE)
-    return raw_bytes
-
-
-if __name__ == '__main__':
-    import doctest
-    doctest.testmod()
-

rsa/util.py

@@ -1,79 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-'''Utility functions.'''
-
-from __future__ import with_statement
-
-import sys
-from optparse import OptionParser
-
-import rsa.key
-
-def private_to_public():
-    '''Reads a private key and outputs the corresponding public key.'''
-
-    # Parse the CLI options
-    parser = OptionParser(usage='usage: %prog [options]',
-            description='Reads a private key and outputs the '
-            'corresponding public key. Both private and public keys use '
-            'the format described in PKCS#1 v1.5')
-
-    parser.add_option('-i', '--input', dest='infilename', type='string',
-            help='Input filename. Reads from stdin if not specified')
-    parser.add_option('-o', '--output', dest='outfilename', type='string',
-            help='Output filename. Writes to stdout of not specified')
-
-    parser.add_option('--inform', dest='inform',
-            help='key format of input - default PEM',
-            choices=('PEM', 'DER'), default='PEM')
-
-    parser.add_option('--outform', dest='outform',
-            help='key format of output - default PEM',
-            choices=('PEM', 'DER'), default='PEM')
-
-    (cli, cli_args) = parser.parse_args(sys.argv)
-
-    # Read the input data
-    if cli.infilename:
-        print >>sys.stderr, 'Reading private key from %s in %s format' % \
-            (cli.infilename, cli.inform)
-        with open(cli.infilename) as infile:
-            in_data = infile.read()
-    else:
-        print >>sys.stderr, 'Reading private key from stdin in %s format' % \
-            cli.inform
-        in_data = sys.stdin.read()
-
-
-    # Take the public fields and create a public key
-    priv_key = rsa.key.PrivateKey.load_pkcs1(in_data, cli.inform)
-    pub_key = rsa.key.PublicKey(priv_key.n, priv_key.e)
-
-    # Save to the output file
-    out_data = pub_key.save_pkcs1(cli.outform)
-
-    if cli.outfilename:
-        print >>sys.stderr, 'Writing public key to %s in %s format' % \
-            (cli.outfilename, cli.outform)
-        with open(cli.outfilename, 'w') as outfile:
-            outfile.write(out_data)
-    else:
-        print >>sys.stderr, 'Writing public key to stdout in %s format' % \
-            cli.outform
-        sys.stdout.write(out_data)
-
-    

rsa/varblock.py

@@ -1,155 +0,0 @@
-# -*- coding: utf-8 -*-
-#
-#  Copyright 2011 Sybren A. Stüvel <sybren@stuvel.eu>
-#
-#  Licensed under the Apache License, Version 2.0 (the "License");
-#  you may not use this file except in compliance with the License.
-#  You may obtain a copy of the License at
-#
-#      http://www.apache.org/licenses/LICENSE-2.0
-#
-#  Unless required by applicable law or agreed to in writing, software
-#  distributed under the License is distributed on an "AS IS" BASIS,
-#  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-#  See the License for the specific language governing permissions and
-#  limitations under the License.
-
-'''VARBLOCK file support
-
-The VARBLOCK file format is as follows, where || denotes byte concatenation:
-
-    FILE := VERSION || BLOCK || BLOCK ...
-
-    BLOCK := LENGTH || DATA
-
-    LENGTH := varint-encoded length of the subsequent data. Varint comes from
-    Google Protobuf, and encodes an integer into a variable number of bytes.
-    Each byte uses the 7 lowest bits to encode the value. The highest bit set
-    to 1 indicates the next byte is also part of the varint. The last byte will
-    have this bit set to 0.
-
-This file format is called the VARBLOCK format, in line with the varint format
-used to denote the block sizes.
-
-'''
-
-from rsa._compat import byte, b
-
-
-ZERO_BYTE = b('\x00')
-VARBLOCK_VERSION = 1
-
-def read_varint(infile):
-    '''Reads a varint from the file.
-
-    When the first byte to be read indicates EOF, (0, 0) is returned. When an
-    EOF occurs when at least one byte has been read, an EOFError exception is
-    raised.
-
-    @param infile: the file-like object to read from. It should have a read()
-        method.
-    @returns (varint, length), the read varint and the number of read bytes.
-    '''
-
-    varint = 0
-    read_bytes = 0
-
-    while True:
-        char = infile.read(1)
-        if len(char) == 0:
-            if read_bytes == 0:
-                return (0, 0)
-            raise EOFError('EOF while reading varint, value is %i so far' %
-                           varint)
-
-        byte = ord(char)
-        varint += (byte & 0x7F) << (7 * read_bytes)
-
-        read_bytes += 1
-
-        if not byte & 0x80:
-            return (varint, read_bytes)
-
-
-def write_varint(outfile, value):
-    '''Writes a varint to a file.
-
-    @param outfile: the file-like object to write to. It should have a write()
-        method.
-    @returns the number of written bytes.
-    '''
-
-    # there is a big difference between 'write the value 0' (this case) and
-    # 'there is nothing left to write' (the false-case of the while loop)
-
-    if value == 0:
-        outfile.write(ZERO_BYTE)
-        return 1
-
-    written_bytes = 0
-    while value > 0:
-        to_write = value & 0x7f
-        value = value >> 7
-
-        if value > 0:
-            to_write |= 0x80
-
-        outfile.write(byte(to_write))
-        written_bytes += 1
-
-    return written_bytes
-
-
-def yield_varblocks(infile):
-    '''Generator, yields each block in the input file.
-
-    @param infile: file to read, is expected to have the VARBLOCK format as
-        described in the module's docstring.
-    @yields the contents of each block.
-    '''
-
-    # Check the version number
-    first_char = infile.read(1)
-    if len(first_char) == 0:
-        raise EOFError('Unable to read VARBLOCK version number')
-
-    version = ord(first_char)
-    if version != VARBLOCK_VERSION:
-        raise ValueError('VARBLOCK version %i not supported' % version)
-
-    while True:
-        (block_size, read_bytes) = read_varint(infile)
-
-        # EOF at block boundary, that's fine.
-        if read_bytes == 0 and block_size == 0:
-            break
-
-        block = infile.read(block_size)
-
-        read_size = len(block)
-        if read_size != block_size:
-            raise EOFError('Block size is %i, but could read only %i bytes' %
-                           (block_size, read_size))
-
-        yield block
-
-
-def yield_fixedblocks(infile, blocksize):
-    '''Generator, yields each block of ``blocksize`` bytes in the input file.
-
-    :param infile: file to read and separate in blocks.
-    :returns: a generator that yields the contents of each block
-    '''
-
-    while True:
-        block = infile.read(blocksize)
-
-        read_bytes = len(block)
-        if read_bytes == 0:
-            break
-
-        yield block
-
-        if read_bytes < blocksize:
-            break
-