src/defaults.py

@@ -1,3 +1,8 @@
+"""
+src/defaults.py
+===============
+"""
+
 # sanity check, prevent doing ridiculous PoW
 # 20 million PoWs equals approximately 2 days on dev's dual R9 290
 ridiculousDifficulty = 20000000
@@ -7,7 +12,13 @@ ridiculousDifficulty = 20000000
 # namecoin integration to "namecoind".
 namecoinDefaultRpcPort = "8336"
 
-#If changed, these values will cause particularly unexpected behavior: You won't be able to either send or receive messages because the proof of work you do (or demand) won't match that done or demanded by others. Don't change them!
+# If changed, these values will cause particularly unexpected behavior:
-networkDefaultProofOfWorkNonceTrialsPerByte = 1000 #The amount of work that should be performed (and demanded) per byte of the payload.
+# You won't be able to either send or receive messages because the proof
-networkDefaultPayloadLengthExtraBytes = 1000 #To make sending short messages a little more difficult, this value is added to the payload length for use in calculating the proof of work target.
+# of work you do (or demand) won't match that done or demanded by others.
-
+# Don't change them!
+# The amount of work that should be performed (and demanded) per byte of the payload.
+networkDefaultProofOfWorkNonceTrialsPerByte = 1000
+# To make sending short messages a little more difficult, this value is
+# added to the payload length for use in calculating the proof of work
+# target.
+networkDefaultPayloadLengthExtraBytes = 1000

src/network/asyncore_pollchoose.py

@@ -1,6 +1,11 @@
 # -*- Mode: Python -*-
 #   Id: asyncore.py,v 2.51 2000/09/07 22:29:26 rushing Exp
 #   Author: Sam Rushing <rushing@nightmare.com>
+# pylint: disable=too-many-statements,too-many-branches,no-self-use,too-many-lines,attribute-defined-outside-init
+# pylint: disable=global-statement
+"""
+src/network/asyncore_pollchoose.py
+==================================
 
 # ======================================================================
 # Copyright 1996 by Sam Rushing
@@ -25,7 +30,7 @@
 # CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 # ======================================================================
 
-"""Basic infrastructure for asynchronous socket service clients and servers.
+Basic infrastructure for asynchronous socket service clients and servers.
 
 There are only two ways to have a program on a single processor do "more
 than one thing at a time".  Multi-threaded programming is the simplest and
@@ -46,22 +51,20 @@ many of the difficult problems for you, making the task of building
 sophisticated high-performance network servers and clients a snap.
 """
 
-# randomise object order for bandwidth balancing
+import os
-import random
 import select
 import socket
 import sys
 import time
-from threading import current_thread
 import warnings
+from errno import (
+    EADDRINUSE, EAGAIN, EALREADY, EBADF, ECONNABORTED, ECONNREFUSED, ECONNRESET, EHOSTUNREACH, EINPROGRESS, EINTR,
+    EINVAL, EISCONN, ENETUNREACH, ENOTCONN, ENOTSOCK, EPIPE, ESHUTDOWN, ETIMEDOUT, EWOULDBLOCK, errorcode
+)
+from threading import current_thread
 
-import os
 import helper_random
-from errno import EALREADY, EINPROGRESS, EWOULDBLOCK, ECONNRESET, EINVAL, \
+
-     ENOTCONN, ESHUTDOWN, EISCONN, EBADF, ECONNABORTED, EPIPE, EAGAIN, \
-     ECONNREFUSED, EHOSTUNREACH, ENETUNREACH, ENOTSOCK, EINTR, ETIMEDOUT, \
-     EADDRINUSE, \
-     errorcode
 try:
     from errno import WSAEWOULDBLOCK
 except (ImportError, AttributeError):
@@ -75,13 +78,15 @@ try:
 except (ImportError, AttributeError):
     WSAECONNRESET = ECONNRESET
 try:
-    from errno import WSAEADDRINUSE
+    # Desirable side-effects on Windows; imports winsock error numbers
+    from errno import WSAEADDRINUSE  # pylint: disable=unused-import
 except (ImportError, AttributeError):
     WSAEADDRINUSE = EADDRINUSE
 
-_DISCONNECTED = frozenset((ECONNRESET, ENOTCONN, ESHUTDOWN, ECONNABORTED, EPIPE,
+
-                           EBADF, ECONNREFUSED, EHOSTUNREACH, ENETUNREACH, ETIMEDOUT,
+_DISCONNECTED = frozenset((
-                           WSAECONNRESET))
+    ECONNRESET, ENOTCONN, ESHUTDOWN, ECONNABORTED, EPIPE, EBADF, ECONNREFUSED,
+    EHOSTUNREACH, ENETUNREACH, ETIMEDOUT, WSAECONNRESET))
 
 OP_READ = 1
 OP_WRITE = 2
@@ -91,17 +96,21 @@ try:
 except NameError:
     socket_map = {}
 
+
 def _strerror(err):
     try:
         return os.strerror(err)
     except (ValueError, OverflowError, NameError):
         if err in errorcode:
             return errorcode[err]
-        return "Unknown error %s" %err
+        return "Unknown error %s" % err
+
 
 class ExitNow(Exception):
+    """We don't use directly but may be necessary as we replace asyncore due to some library raising or expecting it"""
     pass
 
+
 _reraised_exceptions = (ExitNow, KeyboardInterrupt, SystemExit)
 
 maxDownloadRate = 0
@@ -113,28 +122,38 @@ uploadTimestamp = 0
 uploadBucket = 0
 sentBytes = 0
 
+
 def read(obj):
+    """Event to read from the object, i.e. its network socket."""
+
     if not can_receive():
         return
     try:
         obj.handle_read_event()
     except _reraised_exceptions:
         raise
-    except:
+    except BaseException:
         obj.handle_error()
 
+
 def write(obj):
+    """Event to write to the object, i.e. its network socket."""
+
     if not can_send():
         return
     try:
         obj.handle_write_event()
     except _reraised_exceptions:
         raise
-    except:
+    except BaseException:
         obj.handle_error()
 
+
 def set_rates(download, upload):
+    """Set throttling rates"""
+
     global maxDownloadRate, maxUploadRate, downloadBucket, uploadBucket, downloadTimestamp, uploadTimestamp
+
     maxDownloadRate = float(download) * 1024
     maxUploadRate = float(upload) * 1024
     downloadBucket = maxDownloadRate
@@ -142,14 +161,24 @@ def set_rates(download, upload):
     downloadTimestamp = time.time()
     uploadTimestamp = time.time()
 
+
 def can_receive():
+    """Predicate indicating whether the download throttle is in effect"""
+
     return maxDownloadRate == 0 or downloadBucket > 0
 
+
 def can_send():
+    """Predicate indicating whether the upload throttle is in effect"""
+
     return maxUploadRate == 0 or uploadBucket > 0
 
+
 def update_received(download=0):
+    """Update the receiving throttle"""
+
     global receivedBytes, downloadBucket, downloadTimestamp
+
     currentTimestamp = time.time()
     receivedBytes += download
     if maxDownloadRate > 0:
@@ -160,8 +189,12 @@ def update_received(download=0):
         downloadBucket -= download
     downloadTimestamp = currentTimestamp
 
+
 def update_sent(upload=0):
+    """Update the sending throttle"""
+
     global sentBytes, uploadBucket, uploadTimestamp
+
     currentTimestamp = time.time()
     sentBytes += upload
     if maxUploadRate > 0:
@@ -172,15 +205,21 @@ def update_sent(upload=0):
         uploadBucket -= upload
     uploadTimestamp = currentTimestamp
 
+
 def _exception(obj):
+    """Handle exceptions as appropriate"""
+
     try:
         obj.handle_expt_event()
     except _reraised_exceptions:
         raise
-    except:
+    except BaseException:
         obj.handle_error()
 
+
 def readwrite(obj, flags):
+    """Read and write any pending data to/from the object"""
+
     try:
         if flags & select.POLLIN and can_receive():
             obj.handle_read_event()
@@ -197,15 +236,20 @@ def readwrite(obj, flags):
             obj.handle_close()
     except _reraised_exceptions:
         raise
-    except:
+    except BaseException:
         obj.handle_error()
 
+
 def select_poller(timeout=0.0, map=None):
     """A poller which uses select(), available on most platforms."""
+    # pylint: disable=redefined-builtin
+
     if map is None:
         map = socket_map
     if map:
-        r = []; w = []; e = []
+        r = []
+        w = []
+        e = []
         for fd, obj in list(map.items()):
             is_r = obj.readable()
             is_w = obj.writable()
@@ -251,13 +295,16 @@ def select_poller(timeout=0.0, map=None):
     else:
         current_thread().stop.wait(timeout)
 
+
 def poll_poller(timeout=0.0, map=None):
     """A poller which uses poll(), available on most UNIXen."""
+    # pylint: disable=redefined-builtin
+
     if map is None:
         map = socket_map
     if timeout is not None:
         # timeout is in milliseconds
-        timeout = int(timeout*1000)
+        timeout = int(timeout * 1000)
     try:
         poll_poller.pollster
     except AttributeError:
@@ -301,12 +348,16 @@ def poll_poller(timeout=0.0, map=None):
     else:
         current_thread().stop.wait(timeout)
 
+
 # Aliases for backward compatibility
 poll = select_poller
 poll2 = poll3 = poll_poller
 
+
 def epoll_poller(timeout=0.0, map=None):
     """A poller which uses epoll(), supported on Linux 2.5.44 and newer."""
+    # pylint: disable=redefined-builtin
+
     if map is None:
         map = socket_map
     try:
@@ -346,7 +397,7 @@ def epoll_poller(timeout=0.0, map=None):
             if e.errno != EINTR:
                 raise
             r = []
-        except select.error, err:
+        except select.error as err:
             if err.args[0] != EINTR:
                 raise
             r = []
@@ -358,8 +409,11 @@ def epoll_poller(timeout=0.0, map=None):
     else:
         current_thread().stop.wait(timeout)
 
+
 def kqueue_poller(timeout=0.0, map=None):
     """A poller which uses kqueue(), BSD specific."""
+    # pylint: disable=redefined-builtin,no-member
+
     if map is None:
         map = socket_map
     try:
@@ -425,8 +479,10 @@ def kqueue_poller(timeout=0.0, map=None):
         current_thread().stop.wait(timeout)
 
 
-def loop(timeout=30.0, use_poll=False, map=None, count=None, 
+def loop(timeout=30.0, use_poll=False, map=None, count=None, poller=None):
-         poller=None):
+    """Poll in a loop, until count or timeout is reached"""
+    # pylint: disable=redefined-builtin
+
     if map is None:
         map = socket_map
     if count is None:
@@ -460,10 +516,13 @@ def loop(timeout=30.0, use_poll=False, map=None, count=None,
             break
         # then poll
         poller(subtimeout, map)
-        if type(count) is int:
+        if isinstance(count, int):
             count = count - 1
 
+
 class dispatcher:
+    """Dispatcher for socket objects"""
+    # pylint: disable=too-many-public-methods,too-many-instance-attributes,old-style-class
 
     debug = False
     connected = False
@@ -478,6 +537,7 @@ class dispatcher:
     minTx = 1500
 
     def __init__(self, sock=None, map=None):
+        # pylint: disable=redefined-builtin
         if map is None:
             self._map = socket_map
         else:
@@ -510,7 +570,7 @@ class dispatcher:
             self.socket = None
 
     def __repr__(self):
-        status = [self.__class__.__module__+"."+self.__class__.__name__]
+        status = [self.__class__.__module__ + "." + self.__class__.__name__]
         if self.accepting and self.addr:
             status.append('listening')
         elif self.connected:
@@ -525,7 +585,9 @@ class dispatcher:
     __str__ = __repr__
 
     def add_channel(self, map=None):
-        #self.log_info('adding channel %s' % self)
+        """Add a channel"""
+        # pylint: disable=redefined-builtin
+
         if map is None:
             map = self._map
         map[self._fileno] = self
@@ -533,11 +595,13 @@ class dispatcher:
         self.poller_filter = 0
 
     def del_channel(self, map=None):
+        """Delete a channel"""
+        # pylint: disable=redefined-builtin
+
         fd = self._fileno
         if map is None:
             map = self._map
         if fd in map:
-            #self.log_info('closing channel %d:%s' % (fd, self))
             del map[fd]
         if self._fileno:
             try:
@@ -564,19 +628,23 @@ class dispatcher:
         self.poller_registered = False
 
     def create_socket(self, family=socket.AF_INET, socket_type=socket.SOCK_STREAM):
+        """Create a socket"""
         self.family_and_type = family, socket_type
         sock = socket.socket(family, socket_type)
         sock.setblocking(0)
         self.set_socket(sock)
 
     def set_socket(self, sock, map=None):
+        """Set socket"""
+        # pylint: disable=redefined-builtin
+
         self.socket = sock
-##        self.__dict__['socket'] = sock
         self._fileno = sock.fileno()
         self.add_channel(map)
 
     def set_reuse_addr(self):
-        # try to re-use a server port if possible
+        """try to re-use a server port if possible"""
+
         try:
             self.socket.setsockopt(
                 socket.SOL_SOCKET, socket.SO_REUSEADDR,
@@ -593,11 +661,13 @@ class dispatcher:
     # ==================================================
 
     def readable(self):
+        """Predicate to indicate download throttle status"""
         if maxDownloadRate > 0:
             return downloadBucket > dispatcher.minTx
         return True
 
     def writable(self):
+        """Predicate to indicate upload throttle status"""
         if maxUploadRate > 0:
             return uploadBucket > dispatcher.minTx
         return True
@@ -607,16 +677,19 @@ class dispatcher:
     # ==================================================
 
     def listen(self, num):
+        """Listen on a port"""
         self.accepting = True
         if os.name == 'nt' and num > 5:
             num = 5
         return self.socket.listen(num)
 
     def bind(self, addr):
+        """Bind to an address"""
         self.addr = addr
         return self.socket.bind(addr)
 
     def connect(self, address):
+        """Connect to an address"""
         self.connected = False
         self.connecting = True
         err = self.socket.connect_ex(address)
@@ -631,7 +704,7 @@ class dispatcher:
             raise socket.error(err, errorcode[err])
 
     def accept(self):
-        # XXX can return either an address pair or None
+        """Accept incoming connections. Returns either an address pair or None."""
         try:
             conn, addr = self.socket.accept()
         except TypeError:
@@ -645,6 +718,7 @@ class dispatcher:
             return conn, addr
 
     def send(self, data):
+        """Send data"""
         try:
             result = self.socket.send(data)
             return result
@@ -658,6 +732,7 @@ class dispatcher:
                 raise
 
     def recv(self, buffer_size):
+        """Receive data"""
         try:
             data = self.socket.recv(buffer_size)
             if not data:
@@ -665,7 +740,6 @@ class dispatcher:
                 # a read condition, and having recv() return 0.
                 self.handle_close()
                 return b''
-            else:
             return data
         except socket.error as why:
             # winsock sometimes raises ENOTCONN
@@ -678,6 +752,7 @@ class dispatcher:
                 raise
 
     def close(self):
+        """Close connection"""
         self.connected = False
         self.accepting = False
         self.connecting = False
@@ -695,10 +770,10 @@ class dispatcher:
             retattr = getattr(self.socket, attr)
         except AttributeError:
             raise AttributeError("%s instance has no attribute '%s'"
-                                 %(self.__class__.__name__, attr))
+                                 % (self.__class__.__name__, attr))
         else:
             msg = "%(me)s.%(attr)s is deprecated; use %(me)s.socket.%(attr)s " \
-                  "instead" % {'me' : self.__class__.__name__, 'attr' : attr}
+                  "instead" % {'me': self.__class__.__name__, 'attr': attr}
             warnings.warn(msg, DeprecationWarning, stacklevel=2)
             return retattr
 
@@ -707,13 +782,16 @@ class dispatcher:
     # and 'log_info' is for informational, warning and error logging.
 
     def log(self, message):
+        """Log a message to stderr"""
         sys.stderr.write('log: %s\n' % str(message))
 
     def log_info(self, message, log_type='info'):
+        """Conditionally print a message"""
         if log_type not in self.ignore_log_types:
-            print('%s: %s' % (log_type, message))
+            print '%s: %s' % (log_type, message)
 
     def handle_read_event(self):
+        """Handle a read event"""
         if self.accepting:
             # accepting sockets are never connected, they "spawn" new
             # sockets that are connected
@@ -726,6 +804,7 @@ class dispatcher:
             self.handle_read()
 
     def handle_connect_event(self):
+        """Handle a connection event"""
         err = self.socket.getsockopt(socket.SOL_SOCKET, socket.SO_ERROR)
         if err != 0:
             raise socket.error(err, _strerror(err))
@@ -734,6 +813,7 @@ class dispatcher:
         self.connecting = False
 
     def handle_write_event(self):
+        """Handle a write event"""
         if self.accepting:
             # Accepting sockets shouldn't get a write event.
             # We will pretend it didn't happen.
@@ -745,6 +825,7 @@ class dispatcher:
         self.handle_write()
 
     def handle_expt_event(self):
+        """Handle expected exceptions"""
         # handle_expt_event() is called if there might be an error on the
         # socket, or if there is OOB data
         # check for the error condition first
@@ -763,12 +844,13 @@ class dispatcher:
             self.handle_expt()
 
     def handle_error(self):
-        nil, t, v, tbinfo = compact_traceback()
+        """Handle unexpected exceptions"""
+        _, t, v, tbinfo = compact_traceback()
 
         # sometimes a user repr method will crash.
         try:
             self_repr = repr(self)
-        except:
+        except BaseException:
             self_repr = '<__repr__(self) failed for object at %0x>' % id(self)
 
         self.log_info(
@@ -782,64 +864,81 @@ class dispatcher:
         )
         self.handle_close()
 
-    def handle_expt(self):
-        self.log_info('unhandled incoming priority event', 'warning')
-
-    def handle_read(self):
-        self.log_info('unhandled read event', 'warning')
-
-    def handle_write(self):
-        self.log_info('unhandled write event', 'warning')
-
-    def handle_connect(self):
-        self.log_info('unhandled connect event', 'warning')
-
     def handle_accept(self):
+        """Handle an accept event"""
         pair = self.accept()
         if pair is not None:
             self.handle_accepted(*pair)
 
+    def handle_expt(self):
+        """Log that the subclass does not implement handle_expt"""
+        self.log_info('unhandled incoming priority event', 'warning')
+
+    def handle_read(self):
+        """Log that the subclass does not implement handle_read"""
+        self.log_info('unhandled read event', 'warning')
+
+    def handle_write(self):
+        """Log that the subclass does not implement handle_write"""
+        self.log_info('unhandled write event', 'warning')
+
+    def handle_connect(self):
+        """Log that the subclass does not implement handle_connect"""
+        self.log_info('unhandled connect event', 'warning')
+
     def handle_accepted(self, sock, addr):
+        """Log that the subclass does not implement handle_accepted"""
         sock.close()
         self.log_info('unhandled accepted event on %s' % (addr), 'warning')
 
     def handle_close(self):
+        """Log that the subclass does not implement handle_close"""
         self.log_info('unhandled close event', 'warning')
         self.close()
 
-# ---------------------------------------------------------------------------
-# adds simple buffered output capability, useful for simple clients.
-# [for more sophisticated usage use asynchat.async_chat]
-# ---------------------------------------------------------------------------
 
 class dispatcher_with_send(dispatcher):
+    """
+    adds simple buffered output capability, useful for simple clients.
+    [for more sophisticated usage use asynchat.async_chat]
+    """
+    # pylint: disable=redefined-builtin
 
     def __init__(self, sock=None, map=None):
+        # pylint: disable=redefined-builtin
+
         dispatcher.__init__(self, sock, map)
         self.out_buffer = b''
 
     def initiate_send(self):
+        """Initiate a send"""
         num_sent = 0
         num_sent = dispatcher.send(self, self.out_buffer[:512])
         self.out_buffer = self.out_buffer[num_sent:]
 
     def handle_write(self):
+        """Handle a write event"""
         self.initiate_send()
 
     def writable(self):
-        return (not self.connected) or len(self.out_buffer)
+        """Predicate to indicate if the object is writable"""
+        return not self.connected or len(self.out_buffer)
 
     def send(self, data):
+        """Send data"""
         if self.debug:
             self.log_info('sending %s' % repr(data))
         self.out_buffer = self.out_buffer + data
         self.initiate_send()
 
+
 # ---------------------------------------------------------------------------
 # used for debugging.
 # ---------------------------------------------------------------------------
 
+
 def compact_traceback():
+    """Return a compact traceback"""
     t, v, tb = sys.exc_info()
     tbinfo = []
     if not tb:  # Must have a traceback
@@ -855,11 +954,15 @@ def compact_traceback():
     # just to be safe
     del tb
 
-    file, function, line = tbinfo[-1]
+    filename, function, line = tbinfo[-1]
     info = ' '.join(['[%s|%s|%s]' % x for x in tbinfo])
-    return (file, function, line), t, v, info
+    return (filename, function, line), t, v, info
+
 
 def close_all(map=None, ignore_all=False):
+    """Close all connections"""
+    # pylint: disable=redefined-builtin
+
     if map is None:
         map = socket_map
     for x in list(map.values()):
@@ -872,11 +975,12 @@ def close_all(map=None, ignore_all=False):
                 raise
         except _reraised_exceptions:
             raise
-        except:
+        except BaseException:
             if not ignore_all:
                 raise
     map.clear()
 
+
 # Asynchronous File I/O:
 #
 # After a little research (reading man pages on various unixen, and
@@ -890,24 +994,31 @@ def close_all(map=None, ignore_all=False):
 #
 # Regardless, this is useful for pipes, and stdin/stdout...
 
+
 if os.name == 'posix':
     import fcntl
 
     class file_wrapper:
-        # Here we override just enough to make a file
+        """
-        # look like a socket for the purposes of asyncore.
+        Here we override just enough to make a file look like a socket for the purposes of asyncore.
-        # The passed fd is automatically os.dup()'d
+
+        The passed fd is automatically os.dup()'d
+        """
+        # pylint: disable=old-style-class
 
         def __init__(self, fd):
             self.fd = os.dup(fd)
 
         def recv(self, *args):
+            """Fake recv()"""
             return os.read(self.fd, *args)
 
         def send(self, *args):
+            """Fake send()"""
             return os.write(self.fd, *args)
 
         def getsockopt(self, level, optname, buflen=None):
+            """Fake getsockopt()"""
             if (level == socket.SOL_SOCKET and
                     optname == socket.SO_ERROR and
                     not buflen):
@@ -919,14 +1030,19 @@ if os.name == 'posix':
         write = send
 
         def close(self):
+            """Fake close()"""
             os.close(self.fd)
 
         def fileno(self):
+            """Fake fileno()"""
             return self.fd
 
     class file_dispatcher(dispatcher):
+        """A dispatcher for file_wrapper objects"""
 
         def __init__(self, fd, map=None):
+            # pylint: disable=redefined-builtin
+
             dispatcher.__init__(self, None, map)
             self.connected = True
             try:
@@ -940,6 +1056,7 @@ if os.name == 'posix':
             fcntl.fcntl(fd, fcntl.F_SETFL, flags)
 
         def set_file(self, fd):
+            """Set file"""
             self.socket = file_wrapper(fd)
             self._fileno = self.socket.fileno()
             self.add_channel()

src/network/tcp.py

@@ -1,41 +1,42 @@
-import base64
+# pylint: disable=too-many-ancestors
-from binascii import hexlify
+"""
-import hashlib
+src/network/tcp.py
-import math
+==================
-import time
+"""
-from pprint import pprint
-import socket
-import struct
-import random
-import traceback
 
-from addresses import calculateInventoryHash
+import math
-from debug import logger
+import random
-from helper_random import randomBytes
+import socket
-import helper_random
+import time
-from inventory import Inventory
-import knownnodes
-from network.advanceddispatcher import AdvancedDispatcher
-from network.bmproto import BMProtoError, BMProtoInsufficientDataError, BMProtoExcessiveDataError, BMProto
-from network.bmobject import BMObject, BMObjectInsufficientPOWError, BMObjectInvalidDataError, BMObjectExpiredError, BMObjectUnwantedStreamError, BMObjectInvalidError, BMObjectAlreadyHaveError
-import network.connectionpool
-from network.dandelion import Dandelion
-from network.node import Node
-import network.asyncore_pollchoose as asyncore
-from network.proxy import Proxy, ProxyError, GeneralProxyError
-from network.objectracker import ObjectTracker
-from network.socks5 import Socks5Connection, Socks5Resolver, Socks5AuthError, Socks5Error
-from network.socks4a import Socks4aConnection, Socks4aResolver, Socks4aError
-from network.tls import TLSDispatcher
 
 import addresses
-from bmconfigparser import BMConfigParser
+import helper_random
-from queues import invQueue, objectProcessorQueue, portCheckerQueue, UISignalQueue, receiveDataQueue
+import knownnodes
+import network.asyncore_pollchoose as asyncore
+import network.connectionpool
+import protocol
 import shared
 import state
-import protocol
+from bmconfigparser import BMConfigParser
+from debug import logger
+from helper_random import randomBytes
+from inventory import Inventory
+from network.advanceddispatcher import AdvancedDispatcher
+from network.bmproto import BMProto
+from network.dandelion import Dandelion
+from network.objectracker import ObjectTracker
+from network.socks4a import Socks4aConnection
+from network.socks5 import Socks5Connection
+from network.tls import TLSDispatcher
+from queues import UISignalQueue, invQueue, receiveDataQueue
+
+
+class TCPConnection(BMProto, TLSDispatcher):  # pylint: disable=too-many-instance-attributes
+    """
+
+    .. todo:: Look to understand and/or fix the non-parent-init-called
+    """
 
-class TCPConnection(BMProto, TLSDispatcher):
     def __init__(self, address=None, sock=None):
         BMProto.__init__(self, address=address, sock=sock)
         self.verackReceived = False
@@ -67,18 +68,25 @@ class TCPConnection(BMProto, TLSDispatcher):
             self.connect(self.destination)
             logger.debug("Connecting to %s:%i", self.destination.host, self.destination.port)
         encodedAddr = protocol.encodeHost(self.destination.host)
-        if protocol.checkIPAddress(encodedAddr, True) and not protocol.checkSocksIP(self.destination.host):
+        self.local = all([
-            self.local = True
+            protocol.checkIPAddress(encodedAddr, True),
-        else:
+            not protocol.checkSocksIP(self.destination.host)
-            self.local = False
+        ])
-        #shared.connectedHostsList[self.destination] = 0
+        ObjectTracker.__init__(self)  # pylint: disable=non-parent-init-called
-        ObjectTracker.__init__(self)
         self.bm_proto_reset()
         self.set_state("bm_header", expectBytes=protocol.Header.size)
 
-    def antiIntersectionDelay(self, initial = False):
+    def antiIntersectionDelay(self, initial=False):
+        """
+        This is a defense against the so called intersection attacks.
+
+        It is called when you notice peer is requesting non-existing objects, or right after the connection is
+        established. It will estimate how long an object will take to propagate across the network, and skip processing
+        "getdata" requests until then. This means an attacker only has one shot per IP to perform the attack.
+        """
         # estimated time for a small object to propagate across the whole network
-        delay = math.ceil(math.log(max(len(knownnodes.knownNodes[x]) for x in knownnodes.knownNodes) + 2, 20)) * (0.2 + invQueue.queueCount/2.0)
+        max_known_nodes = max(len(knownnodes.knownNodes[x]) for x in knownnodes.knownNodes)
+        delay = math.ceil(math.log(max_known_nodes + 2, 20)) * (0.2 + invQueue.queueCount / 2.0)
         # take the stream with maximum amount of nodes
         # +2 is to avoid problems with log(0) and log(1)
         # 20 is avg connected nodes count
@@ -93,12 +101,17 @@ class TCPConnection(BMProto, TLSDispatcher):
                 self.skipUntil = time.time() + delay
 
     def state_connection_fully_established(self):
+        """
+        State after the bitmessage protocol handshake is completed (version/verack exchange, and if both side support
+        TLS, the TLS handshake as well).
+        """
         self.set_connection_fully_established()
         self.set_state("bm_header")
         self.bm_proto_reset()
         return True
 
     def set_connection_fully_established(self):
+        """Initiate inventory synchronisation."""
         if not self.isOutbound and not self.local:
             shared.clientHasReceivedIncomingConnections = True
             UISignalQueue.put(('setStatusIcon', 'green'))
@@ -113,20 +126,18 @@ class TCPConnection(BMProto, TLSDispatcher):
         self.sendBigInv()
 
     def sendAddr(self):
+        """Send a partial list of known addresses to peer."""
         # We are going to share a maximum number of 1000 addrs (per overlapping
         # stream) with our peer. 500 from overlapping streams, 250 from the
         # left child stream, and 250 from the right child stream.
         maxAddrCount = BMConfigParser().safeGetInt("bitmessagesettings", "maxaddrperstreamsend", 500)
 
         # init
-        addressCount = 0
-        payload = b''
-
         templist = []
         addrs = {}
         for stream in self.streams:
             with knownnodes.knownNodesLock:
-                if len(knownnodes.knownNodes[stream]) > 0:
+                if knownnodes.knownNodes[stream]:
                     filtered = {k: v for k, v in knownnodes.knownNodes[stream].items()
                                 if v["lastseen"] > (int(time.time()) - shared.maximumAgeOfNodesThatIAdvertiseToOthers)}
                     elemCount = len(filtered)
@@ -135,28 +146,30 @@ class TCPConnection(BMProto, TLSDispatcher):
                     # only if more recent than 3 hours
                     addrs[stream] = helper_random.randomsample(filtered.items(), elemCount)
                 # sent 250 only if the remote isn't interested in it
-                if len(knownnodes.knownNodes[stream * 2]) > 0 and stream not in self.streams:
+                if knownnodes.knownNodes[stream * 2] and stream not in self.streams:
-                    filtered = {k: v for k, v in knownnodes.knownNodes[stream*2].items()
+                    filtered = {k: v for k, v in knownnodes.knownNodes[stream * 2].items()
                                 if v["lastseen"] > (int(time.time()) - shared.maximumAgeOfNodesThatIAdvertiseToOthers)}
                     elemCount = len(filtered)
                     if elemCount > maxAddrCount / 2:
                         elemCount = int(maxAddrCount / 2)
                     addrs[stream * 2] = helper_random.randomsample(filtered.items(), elemCount)
-                if len(knownnodes.knownNodes[(stream * 2) + 1]) > 0 and stream not in self.streams:
+                if knownnodes.knownNodes[(stream * 2) + 1] and stream not in self.streams:
-                    filtered = {k: v for k, v in knownnodes.knownNodes[stream*2+1].items()
+                    filtered = {k: v for k, v in knownnodes.knownNodes[stream * 2 + 1].items()
                                 if v["lastseen"] > (int(time.time()) - shared.maximumAgeOfNodesThatIAdvertiseToOthers)}
                     elemCount = len(filtered)
                     if elemCount > maxAddrCount / 2:
                         elemCount = int(maxAddrCount / 2)
                     addrs[stream * 2 + 1] = helper_random.randomsample(filtered.items(), elemCount)
-        for substream in addrs.keys():
+        for substream in addrs:
             for peer, params in addrs[substream]:
                 templist.append((substream, peer, params["lastseen"]))
-        if len(templist) > 0:
+        if templist:
             self.append_write_buf(BMProto.assembleAddr(templist))
 
     def sendBigInv(self):
+        """Send hashes of all inventory objects, chunked as the protocol has a per-command limit."""
         def sendChunk():
+            """Send one chunk of inv entries in one command"""
             if objectCount == 0:
                 return
             logger.debug('Sending huge inv message with %i objects to just this one peer', objectCount)
@@ -172,13 +185,12 @@ class TCPConnection(BMProto, TLSDispatcher):
                     if Dandelion().hasHash(objHash):
                         continue
                     bigInvList[objHash] = 0
-                    #self.objectsNewToThem[objHash] = time.time()
         objectCount = 0
         payload = b''
         # Now let us start appending all of these hashes together. They will be
         # sent out in a big inv message to our new peer.
-        for hash, storedValue in bigInvList.items():
+        for obj_hash, _ in bigInvList.items():
-            payload += hash
+            payload += obj_hash
             objectCount += 1
 
             # Remove -1 below when sufficient time has passed for users to
@@ -193,20 +205,26 @@ class TCPConnection(BMProto, TLSDispatcher):
         sendChunk()
 
     def handle_connect(self):
+        """Callback for TCP connection being established."""
         try:
             AdvancedDispatcher.handle_connect(self)
         except socket.error as e:
-            if e.errno in asyncore._DISCONNECTED:
+            if e.errno in asyncore._DISCONNECTED:  # pylint: disable=protected-access
-                logger.debug("%s:%i: Connection failed: %s" % (self.destination.host, self.destination.port, str(e)))
+                logger.debug("%s:%i: Connection failed: %s", self.destination.host, self.destination.port, str(e))
                 return
         self.nodeid = randomBytes(8)
-        self.append_write_buf(protocol.assembleVersionMessage(self.destination.host, self.destination.port, \
+        self.append_write_buf(
-                network.connectionpool.BMConnectionPool().streams, False, nodeid=self.nodeid))
+            protocol.assembleVersionMessage(
-        #print "%s:%i: Sending version"  % (self.destination.host, self.destination.port)
+                self.destination.host,
+                self.destination.port,
+                network.connectionpool.BMConnectionPool().streams,
+                False,
+                nodeid=self.nodeid))
         self.connectedAt = time.time()
         receiveDataQueue.put(self.destination)
 
     def handle_read(self):
+        """Callback for reading from a socket"""
         TLSDispatcher.handle_read(self)
         if self.isOutbound and self.fullyEstablished:
             for s in self.streams:
@@ -218,9 +236,11 @@ class TCPConnection(BMProto, TLSDispatcher):
         receiveDataQueue.put(self.destination)
 
     def handle_write(self):
+        """Callback for writing to a socket"""
         TLSDispatcher.handle_write(self)
 
     def handle_close(self):
+        """Callback for connection being closed."""
         if self.isOutbound and not self.fullyEstablished:
             knownnodes.decreaseRating(self.destination)
         if self.fullyEstablished:
@@ -231,37 +251,55 @@ class TCPConnection(BMProto, TLSDispatcher):
 
 
 class Socks5BMConnection(Socks5Connection, TCPConnection):
+    """SOCKS5 wrapper for TCP connections"""
+
     def __init__(self, address):
         Socks5Connection.__init__(self, address=address)
         TCPConnection.__init__(self, address=address, sock=self.socket)
         self.set_state("init")
 
     def state_proxy_handshake_done(self):
+        """State when SOCKS5 connection succeeds, we need to send a Bitmessage handshake to peer."""
         Socks5Connection.state_proxy_handshake_done(self)
         self.nodeid = randomBytes(8)
-        self.append_write_buf(protocol.assembleVersionMessage(self.destination.host, self.destination.port, \
+        self.append_write_buf(
-                network.connectionpool.BMConnectionPool().streams, False, nodeid=self.nodeid))
+            protocol.assembleVersionMessage(
+                self.destination.host,
+                self.destination.port,
+                network.connectionpool.BMConnectionPool().streams,
+                False,
+                nodeid=self.nodeid))
         self.set_state("bm_header", expectBytes=protocol.Header.size)
         return True
 
 
 class Socks4aBMConnection(Socks4aConnection, TCPConnection):
+    """SOCKS4a wrapper for TCP connections"""
+
     def __init__(self, address):
         Socks4aConnection.__init__(self, address=address)
         TCPConnection.__init__(self, address=address, sock=self.socket)
         self.set_state("init")
 
     def state_proxy_handshake_done(self):
+        """State when SOCKS4a connection succeeds, we need to send a Bitmessage handshake to peer."""
         Socks4aConnection.state_proxy_handshake_done(self)
         self.nodeid = randomBytes(8)
-        self.append_write_buf(protocol.assembleVersionMessage(self.destination.host, self.destination.port, \
+        self.append_write_buf(
-                network.connectionpool.BMConnectionPool().streams, False, nodeid=self.nodeid))
+            protocol.assembleVersionMessage(
+                self.destination.host,
+                self.destination.port,
+                network.connectionpool.BMConnectionPool().streams,
+                False,
+                nodeid=self.nodeid))
         self.set_state("bm_header", expectBytes=protocol.Header.size)
         return True
 
 
 class TCPServer(AdvancedDispatcher):
-    def __init__(self, host='127.0.0.1', port=8444):
+    """TCP connection server for Bitmessage protocol"""
+
+    def __init__(self, host='127.0.0.1', port=8444):  # pylint: disable=redefined-outer-name
         if not hasattr(self, '_map'):
             AdvancedDispatcher.__init__(self)
         self.create_socket(socket.AF_INET, socket.SOCK_STREAM)
@@ -284,15 +322,17 @@ class TCPServer(AdvancedDispatcher):
         self.listen(5)
 
     def is_bound(self):
+        """Is the socket bound?"""
         try:
             return self.bound
         except AttributeError:
             return False
 
     def handle_accept(self):
+        """Incoming connection callback"""
         pair = self.accept()
         if pair is not None:
-            sock, addr = pair
+            sock, _ = pair
             state.ownAddresses[state.Peer(sock.getsockname()[0], sock.getsockname()[1])] = True
             if len(network.connectionpool.BMConnectionPool().inboundConnections) + \
                     len(network.connectionpool.BMConnectionPool().outboundConnections) > \
@@ -314,17 +354,7 @@ if __name__ == "__main__":
 
     for host in (("127.0.0.1", 8448),):
         direct = TCPConnection(host)
-        while len(asyncore.socket_map) > 0:
+        while asyncore.socket_map:
             print "loop, state = %s" % (direct.state)
             asyncore.loop(timeout=10, count=1)
         continue
-
-        proxy = Socks5BMConnection(host)
-        while len(asyncore.socket_map) > 0:
-#            print "loop, state = %s" % (proxy.state)
-            asyncore.loop(timeout=10, count=1)
-
-        proxy = Socks4aBMConnection(host)
-        while len(asyncore.socket_map) > 0:
-#            print "loop, state = %s" % (proxy.state)
-            asyncore.loop(timeout=10, count=1)

src/proofofwork.py

@@ -1,60 +1,71 @@
-#import shared
+# pylint: disable=too-many-branches,too-many-statements,protected-access
-#import time
+"""
-#from multiprocessing import Pool, cpu_count
+src/proofofwork.py
+==================
+"""
+
+import ctypes
 import hashlib
-from struct import unpack, pack
+import os
-from subprocess import call
 import sys
 import time
+from struct import pack, unpack
+from subprocess import call
+
+import openclpow
+import paths
+import queues
+import state
+import tr
 from bmconfigparser import BMConfigParser
 from debug import logger
-import paths
-import openclpow
-import queues
-import tr
-import os
-import ctypes
-
-import state
 
 bitmsglib = 'bitmsghash.so'
-
 bmpow = None
 
+
 def _set_idle():
     if 'linux' in sys.platform:
         os.nice(20)
     else:
         try:
+            # pylint: disable=no-member,import-error
             sys.getwindowsversion()
-            import win32api,win32process,win32con  # @UnresolvedImport
+            import win32api
+            import win32process
+            import win32con
             pid = win32api.GetCurrentProcessId()
             handle = win32api.OpenProcess(win32con.PROCESS_ALL_ACCESS, True, pid)
             win32process.SetPriorityClass(handle, win32process.IDLE_PRIORITY_CLASS)
         except:
-            #Windows 64-bit
+            # Windows 64-bit
             pass
 
+
 def _pool_worker(nonce, initialHash, target, pool_size):
     _set_idle()
     trialValue = float('inf')
     while trialValue > target:
         nonce += pool_size
-        trialValue, = unpack('>Q',hashlib.sha512(hashlib.sha512(pack('>Q',nonce) + initialHash).digest()).digest()[0:8])
+        trialValue, = unpack('>Q', hashlib.sha512(hashlib.sha512(
+            pack('>Q', nonce) + initialHash).digest()).digest()[0:8])
     return [trialValue, nonce]
 
+
 def _doSafePoW(target, initialHash):
     logger.debug("Safe PoW start")
     nonce = 0
     trialValue = float('inf')
     while trialValue > target and state.shutdown == 0:
         nonce += 1
-        trialValue, = unpack('>Q',hashlib.sha512(hashlib.sha512(pack('>Q',nonce) + initialHash).digest()).digest()[0:8])
+        trialValue, = unpack('>Q', hashlib.sha512(hashlib.sha512(
+            pack('>Q', nonce) + initialHash).digest()).digest()[0:8])
     if state.shutdown != 0:
-        raise StopIteration("Interrupted")
+        raise StopIteration("Interrupted")  # pylint: misplaced-bare-raise
     logger.debug("Safe PoW done")
     return [trialValue, nonce]
 
+
 def _doFastPoW(target, initialHash):
     logger.debug("Fast PoW start")
     from multiprocessing import Pool, cpu_count
@@ -97,6 +108,7 @@ def _doFastPoW(target, initialHash):
                 return result[0], result[1]
         time.sleep(0.2)
 
+
 def _doCPoW(target, initialHash):
     h = initialHash
     m = target
@@ -104,21 +116,29 @@ def _doCPoW(target, initialHash):
     out_m = ctypes.c_ulonglong(m)
     logger.debug("C PoW start")
     nonce = bmpow(out_h, out_m)
-    trialValue, = unpack('>Q',hashlib.sha512(hashlib.sha512(pack('>Q',nonce) + initialHash).digest()).digest()[0:8])
+    trialValue, = unpack('>Q', hashlib.sha512(hashlib.sha512(pack('>Q', nonce) + initialHash).digest()).digest()[0:8])
     if state.shutdown != 0:
         raise StopIteration("Interrupted")
     logger.debug("C PoW done")
     return [trialValue, nonce]
 
+
 def _doGPUPoW(target, initialHash):
     logger.debug("GPU PoW start")
     nonce = openclpow.do_opencl_pow(initialHash.encode("hex"), target)
-    trialValue, = unpack('>Q',hashlib.sha512(hashlib.sha512(pack('>Q',nonce) + initialHash).digest()).digest()[0:8])
+    trialValue, = unpack('>Q', hashlib.sha512(hashlib.sha512(pack('>Q', nonce) + initialHash).digest()).digest()[0:8])
-    #print "{} - value {} < {}".format(nonce, trialValue, target)
     if trialValue > target:
         deviceNames = ", ".join(gpu.name for gpu in openclpow.enabledGpus)
-        queues.UISignalQueue.put(('updateStatusBar', (tr._translate("MainWindow",'Your GPU(s) did not calculate correctly, disabling OpenCL. Please report to the developers.'), 1)))
+        queues.UISignalQueue.put((
-        logger.error("Your GPUs (%s) did not calculate correctly, disabling OpenCL. Please report to the developers.", deviceNames)
+            'updateStatusBar', (
+                tr._translate(
+                    "MainWindow",
+                    'Your GPU(s) did not calculate correctly, disabling OpenCL. Please report to the developers.'
+                ),
+                1)))
+        logger.error(
+            "Your GPUs (%s) did not calculate correctly, disabling OpenCL. Please report to the developers.",
+            deviceNames)
         openclpow.enabledGpus = []
         raise Exception("GPU did not calculate correctly.")
     if state.shutdown != 0:
@@ -126,11 +146,17 @@ def _doGPUPoW(target, initialHash):
     logger.debug("GPU PoW done")
     return [trialValue, nonce]
 
-def estimate(difficulty, format = False):
+
+def estimate(difficulty, format=False):  # pylint: disable=redefined-builtin
+    """
+    .. todo: fix unused variable
+    """
     ret = difficulty / 10
     if ret < 1:
         ret = 1
+
     if format:
+        # pylint: disable=unused-variable
         out = str(int(ret)) + " seconds"
         if ret > 60:
             ret /= 60
@@ -148,25 +174,46 @@ def estimate(difficulty, format = False):
         if ret > 366:
             ret /= 366
             out = str(int(ret)) + " years"
-    else:
+        ret = None  # Ensure legacy behaviour
+
     return ret
 
+
 def getPowType():
+    """Get the proof of work implementation"""
+
     if openclpow.openclEnabled():
         return "OpenCL"
     if bmpow:
         return "C"
     return "python"
 
+
 def notifyBuild(tried=False):
+    """Notify the user of the success or otherwise of building the PoW C module"""
+
     if bmpow:
-        queues.UISignalQueue.put(('updateStatusBar', (tr._translate("proofofwork", "C PoW module built successfully."), 1)))
+        queues.UISignalQueue.put(('updateStatusBar', (tr._translate(
+            "proofofwork", "C PoW module built successfully."), 1)))
     elif tried:
-        queues.UISignalQueue.put(('updateStatusBar', (tr._translate("proofofwork", "Failed to build C PoW module. Please build it manually."), 1)))
+        queues.UISignalQueue.put(
+            (
+                'updateStatusBar', (
+                    tr._translate(
+                        "proofofwork",
+                        "Failed to build C PoW module. Please build it manually."
+                    ),
+                    1
+                )
+            )
+        )
     else:
-        queues.UISignalQueue.put(('updateStatusBar', (tr._translate("proofofwork", "C PoW module unavailable. Please build it."), 1)))
+        queues.UISignalQueue.put(('updateStatusBar', (tr._translate(
+            "proofofwork", "C PoW module unavailable. Please build it."), 1)))
+
 
 def buildCPoW():
+    """Attempt to build the PoW C module"""
     if bmpow is not None:
         return
     if paths.frozen is not None:
@@ -190,16 +237,14 @@ def buildCPoW():
     except:
         notifyBuild(True)
 
+
 def run(target, initialHash):
+    """Run the proof of work thread"""
+
     if state.shutdown != 0:
-        raise
+        raise  # pylint: disable=misplaced-bare-raise
     target = int(target)
     if openclpow.openclEnabled():
-#        trialvalue1, nonce1 = _doGPUPoW(target, initialHash)
-#        trialvalue, nonce = _doFastPoW(target, initialHash)
-#        print "GPU: %s, %s" % (trialvalue1, nonce1)
-#        print "Fast: %s, %s" % (trialvalue, nonce)
-#        return [trialvalue, nonce]
         try:
             return _doGPUPoW(target, initialHash)
         except StopIteration:
@@ -225,24 +270,30 @@ def run(target, initialHash):
             raise
         except:
             logger.error("Fast PoW got exception:", exc_info=True)
-            pass #fallback
     try:
         return _doSafePoW(target, initialHash)
     except StopIteration:
         raise
     except:
-        pass #fallback
+        pass  # fallback
+
 
 def resetPoW():
+    """Initialise the OpenCL PoW"""
     openclpow.initCL()
 
+
 # init
+
+
 def init():
-    global bitmsglib, bso, bmpow
+    """Initialise PoW"""
+    # pylint: disable=global-statement
+    global bitmsglib, bmpow
 
     openclpow.initCL()
 
-    if "win32" == sys.platform:
+    if sys.platform == "win32":
         if ctypes.sizeof(ctypes.c_voidp) == 4:
             bitmsglib = 'bitmsghash32.dll'
         else:

src/upnp.py

@@ -1,21 +1,33 @@
-# A simple upnp module to forward port for BitMessage
+# pylint: disable=too-many-statements,too-many-branches,protected-access,no-self-use
-# Reference: http://mattscodecave.com/posts/using-python-and-upnp-to-forward-a-port
+"""
+src/upnp.py
+===========
+
+A simple upnp module to forward port for BitMessage
+Reference: http://mattscodecave.com/posts/using-python-and-upnp-to-forward-a-port
+"""
+
 import httplib
-from random import randint
 import socket
-from struct import unpack, pack
 import threading
 import time
-from bmconfigparser import BMConfigParser
+import urllib2
-from network.connectionpool import BMConnectionPool
+from random import randint
-from helper_threading import *
+from urlparse import urlparse
+from xml.dom.minidom import Document, parseString
+
 import queues
 import shared
 import state
 import tr
+from bmconfigparser import BMConfigParser
+from debug import logger
+from helper_threading import StoppableThread
+from network.connectionpool import BMConnectionPool
+
 
 def createRequestXML(service, action, arguments=None):
-    from xml.dom.minidom import Document
+    """Router UPnP requests are XML formatted"""
 
     doc = Document()
 
@@ -63,11 +75,17 @@ def createRequestXML(service, action, arguments=None):
     # our tree is ready, conver it to a string
     return doc.toxml()
 
-class UPnPError(Exception):
-    def __init__(self, message):
-        self.message
 
-class Router:
+class UPnPError(Exception):
+    """Handle a UPnP error"""
+
+    def __init__(self, message):
+        super(UPnPError, self).__init__()
+        logger.error(message)
+
+
+class Router:  # pylint: disable=old-style-class
+    """Encapulate routing"""
     name = ""
     path = ""
     address = None
@@ -75,10 +93,6 @@ class Router:
     extPort = None
 
     def __init__(self, ssdpResponse, address):
-        import urllib2
-        from xml.dom.minidom import parseString
-        from urlparse import urlparse
-        from debug import logger
 
         self.address = address
 
@@ -92,9 +106,9 @@ class Router:
         try:
             self.routerPath = urlparse(header['location'])
             if not self.routerPath or not hasattr(self.routerPath, "hostname"):
-                logger.error ("UPnP: no hostname: %s", header['location'])
+                logger.error("UPnP: no hostname: %s", header['location'])
         except KeyError:
-            logger.error ("UPnP: missing location header")
+            logger.error("UPnP: missing location header")
 
         # get the profile xml file and read it into a variable
         directory = urllib2.urlopen(header['location']).read()
@@ -112,8 +126,18 @@ class Router:
                 self.path = service.parentNode.getElementsByTagName('controlURL')[0].childNodes[0].data
                 self.upnp_schema = service.childNodes[0].data.split(':')[-2]
 
-    def AddPortMapping(self, externalPort, internalPort, internalClient, protocol, description, leaseDuration = 0, enabled = 1):
+    def AddPortMapping(
-        from debug import logger
+            self,
+            externalPort,
+            internalPort,
+            internalClient,
+            protocol,
+            description,
+            leaseDuration=0,
+            enabled=1,
+    ):  # pylint: disable=too-many-arguments
+        """Add UPnP port mapping"""
+
         resp = self.soapRequest(self.upnp_schema + ':1', 'AddPortMapping', [
             ('NewRemoteHost', ''),
             ('NewExternalPort', str(externalPort)),
@@ -125,11 +149,13 @@ class Router:
             ('NewLeaseDuration', str(leaseDuration))
         ])
         self.extPort = externalPort
-        logger.info("Successfully established UPnP mapping for %s:%i on external port %i", internalClient, internalPort, externalPort)
+        logger.info("Successfully established UPnP mapping for %s:%i on external port %i",
+                    internalClient, internalPort, externalPort)
         return resp
 
     def DeletePortMapping(self, externalPort, protocol):
-        from debug import logger
+        """Delete UPnP port mapping"""
+
         resp = self.soapRequest(self.upnp_schema + ':1', 'DeletePortMapping', [
             ('NewRemoteHost', ''),
             ('NewExternalPort', str(externalPort)),
@@ -139,14 +165,15 @@ class Router:
         return resp
 
     def GetExternalIPAddress(self):
-        from xml.dom.minidom import parseString
+        """Get the external address"""
+
         resp = self.soapRequest(self.upnp_schema + ':1', 'GetExternalIPAddress')
         dom = parseString(resp)
         return dom.getElementsByTagName('NewExternalIPAddress')[0].childNodes[0].data
 
     def soapRequest(self, service, action, arguments=None):
-        from xml.dom.minidom import parseString
+        """Make a request to a router"""
-        from debug import logger
+
         conn = httplib.HTTPConnection(self.routerPath.hostname, self.routerPath.port)
         conn.request(
             'POST',
@@ -164,21 +191,24 @@ class Router:
             try:
                 dom = parseString(respData)
                 errinfo = dom.getElementsByTagName('errorDescription')
-                if len(errinfo) > 0:
+                if errinfo:
                     logger.error("UPnP error: %s", respData)
                     raise UPnPError(errinfo[0].childNodes[0].data)
             except:
-                raise UPnPError("Unable to parse SOAP error: %s" %(respData))
+                raise UPnPError("Unable to parse SOAP error: %s" % (respData))
         return resp
 
+
 class uPnPThread(threading.Thread, StoppableThread):
+    """Start a thread to handle UPnP activity"""
+
     SSDP_ADDR = "239.255.255.250"
     GOOGLE_DNS = "8.8.8.8"
     SSDP_PORT = 1900
     SSDP_MX = 2
     SSDP_ST = "urn:schemas-upnp-org:device:InternetGatewayDevice:1"
 
-    def __init__ (self):
+    def __init__(self):
         threading.Thread.__init__(self, name="uPnPThread")
         try:
             self.extPort = BMConfigParser().getint('bitmessagesettings', 'extport')
@@ -194,7 +224,7 @@ class uPnPThread(threading.Thread, StoppableThread):
         self.initStop()
 
     def run(self):
-        from debug import logger
+        """Start the thread to manage UPnP activity"""
 
         logger.debug("Starting UPnP thread")
         logger.debug("Local IP: %s", self.localIP)
@@ -209,9 +239,11 @@ class uPnPThread(threading.Thread, StoppableThread):
             if not bound:
                 time.sleep(1)
 
+        # pylint: disable=attribute-defined-outside-init
         self.localPort = BMConfigParser().getint('bitmessagesettings', 'port')
+
         while state.shutdown == 0 and BMConfigParser().safeGetBoolean('bitmessagesettings', 'upnp'):
-            if time.time() - lastSent > self.sendSleep and len(self.routers) == 0:
+            if time.time() - lastSent > self.sendSleep and not self.routers:
                 try:
                     self.sendSearchRouter()
                 except:
@@ -219,7 +251,7 @@ class uPnPThread(threading.Thread, StoppableThread):
                 lastSent = time.time()
             try:
                 while state.shutdown == 0 and BMConfigParser().safeGetBoolean('bitmessagesettings', 'upnp'):
-                    resp,(ip,port) = self.sock.recvfrom(1000)
+                    resp, (ip, _) = self.sock.recvfrom(1000)
                     if resp is None:
                         continue
                     newRouter = Router(resp, ip)
@@ -230,14 +262,11 @@ class uPnPThread(threading.Thread, StoppableThread):
                         logger.debug("Found UPnP router at %s", ip)
                         self.routers.append(newRouter)
                         self.createPortMapping(newRouter)
-                        queues.UISignalQueue.put(('updateStatusBar', tr._translate("MainWindow",'UPnP port mapping established on port %1').arg(str(self.extPort))))
+                        queues.UISignalQueue.put(('updateStatusBar', tr._translate(
-                        # retry connections so that the submitted port is refreshed
+                            "MainWindow", 'UPnP port mapping established on port %1'
-                        with shared.alreadyAttemptedConnectionsListLock:
+                        ).arg(str(self.extPort))))
-                            shared.alreadyAttemptedConnectionsList.clear()
-                            shared.alreadyAttemptedConnectionsListResetTime = int(
-                                time.time())
                         break
-            except socket.timeout as e:
+            except socket.timeout:
                 pass
             except:
                 logger.error("Failure running UPnP router search.", exc_info=True)
@@ -259,17 +288,20 @@ class uPnPThread(threading.Thread, StoppableThread):
                 self.deletePortMapping(router)
         shared.extPort = None
         if deleted:
-            queues.UISignalQueue.put(('updateStatusBar', tr._translate("MainWindow",'UPnP port mapping removed')))
+            queues.UISignalQueue.put(('updateStatusBar', tr._translate("MainWindow", 'UPnP port mapping removed')))
         logger.debug("UPnP thread done")
 
     def getLocalIP(self):
+        """Get the local IP of the node"""
+
         s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
         s.setsockopt(socket.SOL_SOCKET, socket.SO_BROADCAST, 1)
         s.connect((uPnPThread.GOOGLE_DNS, 1))
         return s.getsockname()[0]
 
     def sendSearchRouter(self):
-        from debug import logger
+        """Querying for UPnP services"""
+
         ssdpRequest = "M-SEARCH * HTTP/1.1\r\n" + \
             "HOST: %s:%d\r\n" % (uPnPThread.SSDP_ADDR, uPnPThread.SSDP_PORT) + \
             "MAN: \"ssdp:discover\"\r\n" + \
@@ -283,11 +315,10 @@ class uPnPThread(threading.Thread, StoppableThread):
             logger.exception("UPnP send query failed")
 
     def createPortMapping(self, router):
-        from debug import logger
+        """Add a port mapping"""
 
         for i in range(50):
             try:
-                routerIP, = unpack('>I', socket.inet_aton(router.address))
                 localIP = self.localIP
                 if i == 0:
                     extPort = self.localPort  # try same port first
@@ -295,7 +326,12 @@ class uPnPThread(threading.Thread, StoppableThread):
                     extPort = self.extPort  # try external port from last time next
                 else:
                     extPort = randint(32767, 65535)
-                logger.debug("Attempt %i, requesting UPnP mapping for %s:%i on external port %i", i, localIP, self.localPort,  extPort)
+                logger.debug(
+                    "Attempt %i, requesting UPnP mapping for %s:%i on external port %i",
+                    i,
+                    localIP,
+                    self.localPort,
+                    extPort)
                 router.AddPortMapping(extPort, self.localPort, localIP, 'TCP', 'BitMessage')
                 shared.extPort = extPort
                 self.extPort = extPort
@@ -306,7 +342,5 @@ class uPnPThread(threading.Thread, StoppableThread):
                 logger.debug("UPnP error: ", exc_info=True)
 
     def deletePortMapping(self, router):
+        """Delete a port mapping"""
         router.DeletePortMapping(router.extPort, 'TCP')
-
-
-