ipxe_scripts/embed.ipxe

188 lines
6.4 KiB
Plaintext

#!ipxe
# I've assume IPv4 for this script, so if we need IPv6, it may need
# modifications.
# Require only verified images to boot
imgtrust --permanent
# For the "focal" part of the URL string, in case that changes in the future.
set ubuntu-variant focal
goto get_arch
#################
### This section is at the top, so it's easier to modify.
:static_ip_boot_setup
# Open all network interface devices, so we aren't restricted to just the first
ifopen
sleep 1
# Currently we just configure IP info by MAC address. So we iterate over
# MAC addresses and set the variables. To ensure we use the desired
# device, we iterate over all devices and simply find matches by
# MAC address.
set idx:int32 0
set successful f
:loop
isset ${net${idx}/mac} || goto loop_done
######################## SET STATIC IP INFO HERE #############################
# Just copy/paste an entire line to add more
iseq ${net${idx}/mac:string} "00:01:02:A0:B1:C1" && set ip-dev-name eth0 && set ip-addr "192.168.1.5" && set ip-gateway "192.168.1.1" && set ip-netmask "255.255.255.0" && set ip-dns "1.1.1.1" && set successful t && goto loop_done ||
iseq ${net${idx}/mac:string} "03:04:05:D4:E5:F6" && set ip-dev-name eth0 && set ip-addr "192.168.99.2" && set ip-gateway "192.168.99.1" && set ip-netmask "255.255.255.0" && set ip-dns "1.1.1.1" && set successful t && goto loop_done ||
# node1.bitmessage.at
iseq ${net${idx}/mac:string} "40:A8:F0:31:CC:58" && set ip-dev-name eth0 && set ip-addr "93.189.28.82" && set ip-gateway "93.189.28.81" && set ip-netmask "255.255.255.240" && set ip-dns "1.1.1.1" && set successful t && goto loop_done ||
iseq ${net${idx}/mac:string} "40:A8:F0:31:CC:59" && set ip-dev-name eth0 && set ip-addr "93.189.28.82" && set ip-gateway "93.189.28.81" && set ip-netmask "255.255.255.240" && set ip-dns "1.1.1.1" && set successful t && goto loop_done ||
##############################################################################
inc idx && goto loop
:loop_done
# If we have not successfully found a MAC match, then we error, because we
# also failed DHCP. So there's nothing we can do but fail.
iseq successful f && goto error_handler
# If on the other hand we're successful, then we construct the kernel ip= line
set ip-info ${ip-addr}::${ip-gateway}:${ip-netmask}::${ip-dev-name}:off:${ip-dns}
# And setup IPXE networking.
# First, set device info
set net${idx}/ip ${ip-addr}
set net${idx}/gateway ${ip-gateway}
set net${idx}/netmask ${ip-netmask}
set net${idx}/dns ${ip-dns}
# Now we close all net devices and enable only the one we need.
# Sleep a little between, so we don't error by continuing too fast before the
# device is actually ready
sleep 1
ifclose
sleep 1
ifopen net${idx}
sleep 1
# Set settings again in case the ifdown/ifup cleared them
set net${idx}/ip ${ip-addr}
set net${idx}/gateway ${ip-gateway}
set net${idx}/netmask ${ip-netmask}
set net${idx}/dns ${ip-dns}
sleep 1
# Now we have the ip= line and the IPXE network configured, so we can
# download and boot.
goto boot_all
###
#################
# In case we want to... log?? Or do something else.
:error_handler
echo "###########################################################"
echo "An unspecified error has occurred."
echo "The system will sleep for two minutes and then reboot."
echo "###########################################################"
sleep 60
sleep 60
reboot
# Should not occur, but just in case...
sleep 5
exit
# Get relevant CPU arch.
:get_arch
iseq ${buildarch} arm32 && goto start_arm32 ||
iseq ${buildarch} arm64 && goto start_arm64 ||
iseq ${buildarch} i386 && goto start_i386 ||
iseq ${buildarch} x86_64 && goto start_amd64 ||
goto error_handler
# Builds may be done on 32-bit, but machines will always be 64-bit.
# Keep this section just in case we want to use 32-bit machines in the future.
:start_arm32
goto start_arm64
:start_i386
goto start_amd64
# Set arch info and determine if we can use DHCP for network.
# Then either boot or goto static IP setup.
:start_arm64
set arch-info arm64
dhcp || goto static_ip_boot_arm64
sleep 1
set ip-info dhcp
goto boot_all
:start_amd64
set arch-info amd64
dhcp || goto static_ip_boot_amd64
sleep 1
set ip-info dhcp
goto boot_all
# This process should be the same for arm and x86, but I'll leave this section
# intact in case it turns out it's not the same
:static_ip_boot_arm64
goto static_ip_boot_setup
:static_ip_boot_amd64
goto static_ip_boot_setup
:boot_all
# We use HTTP because IPXE's HTTPS implementation is lacking. So we delegate
# integrity and validation to imgverify.
# Naming the squashfs download "/squashfs" is required, otherwise the boot
# kernel fails to load it in the "root=" part of the kernel cmdline.
# However, note that imgverify will fail if you refer to it as "/squashfs"
# instead of "squashfs".
imgfetch http://images.sysdeploy.org/${ubuntu-variant}/${arch-info}/squashfs /squashfs || goto error_handler
imgverify --signer images.sysdeploy.org squashfs http://images.sysdeploy.org/${ubuntu-variant}/${arch-info}/squashfs.sig || goto error_handler
# "--signer" validates against the subject common name field of the signing
# certificate. That signing cert must have both the digital signature key
# usage set and the code-signing key usage extension set.
# By default, IPXE trusts the default Mozilla global root CA list, so
# make sure you pick a common name with a FQDN you control, even if you're
# using a custom CA that you import during build.
initrd http://images.sysdeploy.org/${ubuntu-variant}/${arch-info}/boot-initrd || goto error_handler
imgverify --signer images.sysdeploy.org boot-initrd http://images.sysdeploy.org/${ubuntu-variant}/${arch-info}/boot-initrd.sig || goto error_handler
kernel http://images.sysdeploy.org/${ubuntu-variant}/${arch-info}/boot-kernel || goto error_handler
imgverify --signer images.sysdeploy.org boot-kernel http://images.sysdeploy.org/${ubuntu-variant}/${arch-info}/boot-kernel.sig || goto error_handler
# Get accurate time so we can set the clock in kernel boot cmdline
ntp pool.ntp.org || goto error_handler
boot boot-kernel initrd=boot-initrd rootfstype=squashfs root=/squashfs ip=${ip-info} overlayroot=tmpfs:recurse=0 systemd.clock-usec=${unixtime:int32}000000 ds=nocloud-net;s=https://cloud-init.sysdeploy.org/ || goto error_handler
# unixtime variable must be used with int32, because that's the only way it
# will display as decimal digits. unit32 and string both display as hex.
# Therefore this will stop working in 2038.