preparation for switch from 32 bit time to 64 bit time in protocol

This commit is contained in:
Jonathan Warren 2013-04-17 14:24:16 -04:00
parent 3976c5a8d2
commit 11407f3f44

View File

@ -511,7 +511,16 @@ class receiveDataThread(QThread):
if not self.isProofOfWorkSufficient(data):
print 'Proof of work in broadcast message insufficient.'
return
embeddedTime, = unpack('>I',data[8:12])
readPosition = 8 #bypass the nonce
embeddedTime, = unpack('>I',data[readPosition:readPosition+4])
#This section is used for the transition from 32 bit time to 64 bit time in the protocol.
if embeddedTime == 0:
embeddedTime, = unpack('>Q',data[readPosition:readPosition+8])
readPosition += 8
else:
readPosition += 4
if embeddedTime > (int(time.time())+10800): #prevent funny business
print 'The embedded time in this broadcast message is more than three hours in the future. That doesn\'t make sense. Ignoring message.'
return
@ -539,7 +548,7 @@ class receiveDataThread(QThread):
self.emit(SIGNAL("incrementNumberOfBroadcastsProcessed()"))
self.processbroadcast(data)#When this function returns, we will have either successfully processed this broadcast because we are interested in it, ignored it because we aren't interested in it, or found problem with the broadcast that warranted ignoring it.
self.processbroadcast(readPosition,data)#When this function returns, we will have either successfully processed this broadcast because we are interested in it, ignored it because we aren't interested in it, or found problem with the broadcast that warranted ignoring it.
# Let us now set lengthOfTimeWeShouldUseToProcessThisMessage. If we haven't used the specified amount of time, we shall sleep. These values are mostly the same values used for msg messages although broadcast messages are processed faster.
if len(data) > 100000000: #Size is greater than 100 megabytes
@ -563,8 +572,7 @@ class receiveDataThread(QThread):
printLock.release()
#A broadcast message has a valid time and POW and requires processing. The recbroadcast function calls this one.
def processbroadcast(self,data):
readPosition = 12
def processbroadcast(self,readPosition,data):
broadcastVersion, broadcastVersionLength = decodeVarint(data[readPosition:readPosition+9])
if broadcastVersion <> 1:
#Cannot decode incoming broadcast versions higher than 1. Assuming the sender isn\' being silly, you should upgrade Bitmessage because this message shall be ignored.
@ -693,13 +701,20 @@ class receiveDataThread(QThread):
readPosition = 8
embeddedTime, = unpack('>I',data[readPosition:readPosition+4])
#This section is used for the transition from 32 bit time to 64 bit time in the protocol.
if embeddedTime == 0:
embeddedTime, = unpack('>Q',data[readPosition:readPosition+8])
readPosition += 8
else:
readPosition += 4
if embeddedTime > int(time.time())+10800:
print 'The time in the msg message is too new. Ignoring it. Time:', embeddedTime
return
if embeddedTime < int(time.time())-maximumAgeOfAnObjectThatIAmWillingToAccept:
print 'The time in the msg message is too old. Ignoring it. Time:', embeddedTime
return
readPosition += 4
streamNumberAsClaimedByMsg, streamNumberAsClaimedByMsgLength = decodeVarint(data[readPosition:readPosition+9])
if streamNumberAsClaimedByMsg != self.streamNumber:
print 'The stream number encoded in this msg (' + str(streamNumberAsClaimedByMsg) + ') message does not match the stream number on which it was received. Ignoring it.'
@ -1024,6 +1039,14 @@ class receiveDataThread(QThread):
readPosition = 8 #for the nonce
embeddedTime, = unpack('>I',data[readPosition:readPosition+4])
#This section is used for the transition from 32 bit time to 64 bit time in the protocol.
if embeddedTime == 0:
embeddedTime, = unpack('>Q',data[readPosition:readPosition+8])
readPosition += 8
else:
readPosition += 4
if embeddedTime < int(time.time())-lengthOfTimeToHoldOnToAllPubkeys:
printLock.acquire()
print 'The embedded time in this pubkey message is too old. Ignoring. Embedded time is:', embeddedTime
@ -1034,7 +1057,6 @@ class receiveDataThread(QThread):
print 'The embedded time in this pubkey message more than several hours in the future. This is irrational. Ignoring message.'
printLock.release()
return
readPosition += 4 #for the time
addressVersion, varintLength = decodeVarint(data[readPosition:readPosition+10])
readPosition += varintLength
streamNumber, varintLength = decodeVarint(data[readPosition:readPosition+10])
@ -1154,19 +1176,29 @@ class receiveDataThread(QThread):
if len(data) < 34:
print 'getpubkey message doesn\'t contain enough data. Ignoring.'
return
embeddedTime, = unpack('>I',data[8:12])
readPosition = 8 #bypass the nonce
embeddedTime, = unpack('>I',data[readPosition:readPosition+4])
#This section is used for the transition from 32 bit time to 64 bit time in the protocol.
if embeddedTime == 0:
embeddedTime, = unpack('>Q',data[readPosition:readPosition+8])
readPosition += 8
else:
readPosition += 4
if embeddedTime > int(time.time())+10800:
print 'The time in this getpubkey message is too new. Ignoring it. Time:', embeddedTime
return
if embeddedTime < int(time.time())-maximumAgeOfAnObjectThatIAmWillingToAccept:
print 'The time in this getpubkey message is too old. Ignoring it. Time:', embeddedTime
return
addressVersionNumber, addressVersionLength = decodeVarint(data[12:22])
streamNumber, streamNumberLength = decodeVarint(data[12+addressVersionLength:22+addressVersionLength])
addressVersionNumber, addressVersionLength = decodeVarint(data[readPosition:readPosition+10])
readPosition += addressVersionLength
streamNumber, streamNumberLength = decodeVarint(data[readPosition:readPosition+10])
if streamNumber <> self.streamNumber:
print 'The streamNumber', streamNumber, 'doesn\'t match our stream number:', self.streamNumber
return
readPosition += streamNumberLength
inventoryHash = calculateInventoryHash(data)
inventoryLock.acquire()
@ -1195,7 +1227,7 @@ class receiveDataThread(QThread):
print 'The addressVersionNumber of the pubkey request is too high. Can\'t understand. Ignoring it.'
return
requestedHash = data[12+addressVersionLength+streamNumberLength:32+addressVersionLength+streamNumberLength]
requestedHash = data[readPosition:readPosition+20]
if len(requestedHash) != 20:
print 'The length of the requested hash is not 20 bytes. Something is wrong. Ignoring.'
return
@ -1349,98 +1381,192 @@ class receiveDataThread(QThread):
printLock.acquire()
print 'addr message contains', numberOfAddressesIncluded, 'IP addresses.'
printLock.release()
#print 'lengthOfNumberOfAddresses', lengthOfNumberOfAddresses
if numberOfAddressesIncluded > 1000 or numberOfAddressesIncluded == 0:
return
if len(data) < lengthOfNumberOfAddresses + (34 * numberOfAddressesIncluded):
print 'addr message does not contain enough data. Ignoring.'
return
if self.remoteProtocolVersion == 1:
print 'self.remoteProtocolVersion == 1'
if numberOfAddressesIncluded > 1000 or numberOfAddressesIncluded == 0:
return
if len(data) != lengthOfNumberOfAddresses + (34 * numberOfAddressesIncluded):
print 'addr message does not contain the correct amount of data. Ignoring.'
return
needToWriteKnownNodesToDisk = False
for i in range(0,numberOfAddressesIncluded):
try:
if data[16+lengthOfNumberOfAddresses+(34*i):28+lengthOfNumberOfAddresses+(34*i)] != '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xFF\xFF':
needToWriteKnownNodesToDisk = False
for i in range(0,numberOfAddressesIncluded):
try:
if data[16+lengthOfNumberOfAddresses+(34*i):28+lengthOfNumberOfAddresses+(34*i)] != '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xFF\xFF':
printLock.acquire()
print 'Skipping IPv6 address.', repr(data[16+lengthOfNumberOfAddresses+(34*i):28+lengthOfNumberOfAddresses+(34*i)])
printLock.release()
continue
except Exception, err:
printLock.acquire()
print 'Skipping IPv6 address.', repr(data[16+lengthOfNumberOfAddresses+(34*i):28+lengthOfNumberOfAddresses+(34*i)])
sys.stderr.write('ERROR TRYING TO UNPACK recaddr (to test for an IPv6 address). Message: %s\n' % str(err))
printLock.release()
break #giving up on unpacking any more. We should still be connected however.
try:
recaddrStream, = unpack('>I',data[4+lengthOfNumberOfAddresses+(34*i):8+lengthOfNumberOfAddresses+(34*i)])
except Exception, err:
printLock.acquire()
sys.stderr.write('ERROR TRYING TO UNPACK recaddr (recaddrStream). Message: %s\n' % str(err))
printLock.release()
break #giving up on unpacking any more. We should still be connected however.
if recaddrStream == 0:
continue
except Exception, err:
printLock.acquire()
sys.stderr.write('ERROR TRYING TO UNPACK recaddr (to test for an IPv6 address). Message: %s\n' % str(err))
printLock.release()
break #giving up on unpacking any more. We should still be connected however.
if recaddrStream != self.streamNumber and recaddrStream != (self.streamNumber * 2) and recaddrStream != ((self.streamNumber * 2) + 1): #if the embedded stream number is not in my stream or either of my child streams then ignore it. Someone might be trying funny business.
continue
try:
recaddrServices, = unpack('>Q',data[8+lengthOfNumberOfAddresses+(34*i):16+lengthOfNumberOfAddresses+(34*i)])
except Exception, err:
printLock.acquire()
sys.stderr.write('ERROR TRYING TO UNPACK recaddr (recaddrServices). Message: %s\n' % str(err))
printLock.release()
break #giving up on unpacking any more. We should still be connected however.
try:
recaddrStream, = unpack('>I',data[4+lengthOfNumberOfAddresses+(34*i):8+lengthOfNumberOfAddresses+(34*i)])
except Exception, err:
printLock.acquire()
sys.stderr.write('ERROR TRYING TO UNPACK recaddr (recaddrStream). Message: %s\n' % str(err))
printLock.release()
break #giving up on unpacking any more. We should still be connected however.
if recaddrStream == 0:
continue
if recaddrStream != self.streamNumber and recaddrStream != (self.streamNumber * 2) and recaddrStream != ((self.streamNumber * 2) + 1): #if the embedded stream number is not in my stream or either of my child streams then ignore it. Someone might be trying funny business.
continue
try:
recaddrServices, = unpack('>Q',data[8+lengthOfNumberOfAddresses+(34*i):16+lengthOfNumberOfAddresses+(34*i)])
except Exception, err:
printLock.acquire()
sys.stderr.write('ERROR TRYING TO UNPACK recaddr (recaddrServices). Message: %s\n' % str(err))
printLock.release()
break #giving up on unpacking any more. We should still be connected however.
try:
recaddrPort, = unpack('>H',data[32+lengthOfNumberOfAddresses+(34*i):34+lengthOfNumberOfAddresses+(34*i)])
except Exception, err:
printLock.acquire()
sys.stderr.write('ERROR TRYING TO UNPACK recaddr (recaddrPort). Message: %s\n' % str(err))
printLock.release()
break #giving up on unpacking any more. We should still be connected however.
#print 'Within recaddr(): IP', recaddrIP, ', Port', recaddrPort, ', i', i
hostFromAddrMessage = socket.inet_ntoa(data[28+lengthOfNumberOfAddresses+(34*i):32+lengthOfNumberOfAddresses+(34*i)])
#print 'hostFromAddrMessage', hostFromAddrMessage
if data[28+lengthOfNumberOfAddresses+(34*i)] == '\x7F':
print 'Ignoring IP address in loopback range:', hostFromAddrMessage
continue
if data[28+lengthOfNumberOfAddresses+(34*i)] == '\x0A':
print 'Ignoring IP address in private range:', hostFromAddrMessage
continue
if data[28+lengthOfNumberOfAddresses+(34*i):30+lengthOfNumberOfAddresses+(34*i)] == '\xC0A8':
print 'Ignoring IP address in private range:', hostFromAddrMessage
continue
timeSomeoneElseReceivedMessageFromThisNode, = unpack('>I',data[lengthOfNumberOfAddresses+(34*i):4+lengthOfNumberOfAddresses+(34*i)]) #This is the 'time' value in the received addr message.
if recaddrStream not in knownNodes: #knownNodes is a dictionary of dictionaries with one outer dictionary for each stream. If the outer stream dictionary doesn't exist yet then we must make it.
try:
recaddrPort, = unpack('>H',data[32+lengthOfNumberOfAddresses+(34*i):34+lengthOfNumberOfAddresses+(34*i)])
except Exception, err:
printLock.acquire()
sys.stderr.write('ERROR TRYING TO UNPACK recaddr (recaddrPort). Message: %s\n' % str(err))
printLock.release()
break #giving up on unpacking any more. We should still be connected however.
#print 'Within recaddr(): IP', recaddrIP, ', Port', recaddrPort, ', i', i
hostFromAddrMessage = socket.inet_ntoa(data[28+lengthOfNumberOfAddresses+(34*i):32+lengthOfNumberOfAddresses+(34*i)])
#print 'hostFromAddrMessage', hostFromAddrMessage
if data[28+lengthOfNumberOfAddresses+(34*i)] == '\x7F':
print 'Ignoring IP address in loopback range:', hostFromAddrMessage
continue
if data[28+lengthOfNumberOfAddresses+(34*i)] == '\x0A':
print 'Ignoring IP address in private range:', hostFromAddrMessage
continue
if data[28+lengthOfNumberOfAddresses+(34*i):30+lengthOfNumberOfAddresses+(34*i)] == '\xC0A8':
print 'Ignoring IP address in private range:', hostFromAddrMessage
continue
timeSomeoneElseReceivedMessageFromThisNode, = unpack('>I',data[lengthOfNumberOfAddresses+(34*i):4+lengthOfNumberOfAddresses+(34*i)]) #This is the 'time' value in the received addr message.
if recaddrStream not in knownNodes: #knownNodes is a dictionary of dictionaries with one outer dictionary for each stream. If the outer stream dictionary doesn't exist yet then we must make it.
knownNodesLock.acquire()
knownNodes[recaddrStream] = {}
knownNodesLock.release()
if hostFromAddrMessage not in knownNodes[recaddrStream]:
if len(knownNodes[recaddrStream]) < 20000 and timeSomeoneElseReceivedMessageFromThisNode > (int(time.time())-10800) and timeSomeoneElseReceivedMessageFromThisNode < (int(time.time()) + 10800): #If we have more than 20000 nodes in our list already then just forget about adding more. Also, make sure that the time that someone else received a message from this node is within three hours from now.
knownNodesLock.acquire()
knownNodes[recaddrStream][hostFromAddrMessage] = (recaddrPort, timeSomeoneElseReceivedMessageFromThisNode)
knownNodesLock.release()
print 'added new node', hostFromAddrMessage, 'to knownNodes in stream', recaddrStream
needToWriteKnownNodesToDisk = True
hostDetails = (timeSomeoneElseReceivedMessageFromThisNode, recaddrStream, recaddrServices, hostFromAddrMessage, recaddrPort)
listOfAddressDetailsToBroadcastToPeers.append(hostDetails)
else:
PORT, timeLastReceivedMessageFromThisNode = knownNodes[recaddrStream][hostFromAddrMessage]#PORT in this case is either the port we used to connect to the remote node, or the port that was specified by someone else in a past addr message.
if (timeLastReceivedMessageFromThisNode < timeSomeoneElseReceivedMessageFromThisNode) and (timeSomeoneElseReceivedMessageFromThisNode < int(time.time())):
knownNodesLock.acquire()
knownNodes[recaddrStream][hostFromAddrMessage] = (PORT, timeSomeoneElseReceivedMessageFromThisNode)
knownNodesLock.release()
if PORT != recaddrPort:
print 'Strange occurance: The port specified in an addr message', str(recaddrPort),'does not match the port',str(PORT),'that this program (or some other peer) used to connect to it',str(hostFromAddrMessage),'. Perhaps they changed their port or are using a strange NAT configuration.'
if needToWriteKnownNodesToDisk: #Runs if any nodes were new to us. Also, share those nodes with our peers.
output = open(appdata + 'knownnodes.dat', 'wb')
knownNodesLock.acquire()
knownNodes[recaddrStream] = {}
pickle.dump(knownNodes, output)
knownNodesLock.release()
if hostFromAddrMessage not in knownNodes[recaddrStream]:
if len(knownNodes[recaddrStream]) < 20000 and timeSomeoneElseReceivedMessageFromThisNode > (int(time.time())-10800) and timeSomeoneElseReceivedMessageFromThisNode < (int(time.time()) + 10800): #If we have more than 20000 nodes in our list already then just forget about adding more. Also, make sure that the time that someone else received a message from this node is within three hours from now.
output.close()
self.broadcastaddr(listOfAddressDetailsToBroadcastToPeers) #no longer broadcast
printLock.acquire()
print 'knownNodes currently has', len(knownNodes[self.streamNumber]), 'nodes for this stream.'
printLock.release()
elif self.remoteProtocolVersion == 2:
print 'self.remoteProtocolVersion == 2'
if numberOfAddressesIncluded > 1000 or numberOfAddressesIncluded == 0:
return
if len(data) != lengthOfNumberOfAddresses + (38 * numberOfAddressesIncluded):
print 'addr message does not contain the correct amount of data. Ignoring.'
return
needToWriteKnownNodesToDisk = False
for i in range(0,numberOfAddressesIncluded):
try:
if data[20+lengthOfNumberOfAddresses+(38*i):32+lengthOfNumberOfAddresses+(38*i)] != '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xFF\xFF':
printLock.acquire()
print 'Skipping IPv6 address.', repr(data[20+lengthOfNumberOfAddresses+(38*i):32+lengthOfNumberOfAddresses+(38*i)])
printLock.release()
continue
except Exception, err:
printLock.acquire()
sys.stderr.write('ERROR TRYING TO UNPACK recaddr (to test for an IPv6 address). Message: %s\n' % str(err))
printLock.release()
break #giving up on unpacking any more. We should still be connected however.
try:
recaddrStream, = unpack('>I',data[8+lengthOfNumberOfAddresses+(38*i):12+lengthOfNumberOfAddresses+(38*i)])
except Exception, err:
printLock.acquire()
sys.stderr.write('ERROR TRYING TO UNPACK recaddr (recaddrStream). Message: %s\n' % str(err))
printLock.release()
break #giving up on unpacking any more. We should still be connected however.
if recaddrStream == 0:
continue
if recaddrStream != self.streamNumber and recaddrStream != (self.streamNumber * 2) and recaddrStream != ((self.streamNumber * 2) + 1): #if the embedded stream number is not in my stream or either of my child streams then ignore it. Someone might be trying funny business.
continue
try:
recaddrServices, = unpack('>Q',data[12+lengthOfNumberOfAddresses+(38*i):20+lengthOfNumberOfAddresses+(38*i)])
except Exception, err:
printLock.acquire()
sys.stderr.write('ERROR TRYING TO UNPACK recaddr (recaddrServices). Message: %s\n' % str(err))
printLock.release()
break #giving up on unpacking any more. We should still be connected however.
try:
recaddrPort, = unpack('>H',data[36+lengthOfNumberOfAddresses+(38*i):42+lengthOfNumberOfAddresses+(38*i)])
except Exception, err:
printLock.acquire()
sys.stderr.write('ERROR TRYING TO UNPACK recaddr (recaddrPort). Message: %s\n' % str(err))
printLock.release()
break #giving up on unpacking any more. We should still be connected however.
#print 'Within recaddr(): IP', recaddrIP, ', Port', recaddrPort, ', i', i
hostFromAddrMessage = socket.inet_ntoa(data[32+lengthOfNumberOfAddresses+(38*i):36+lengthOfNumberOfAddresses+(38*i)])
#print 'hostFromAddrMessage', hostFromAddrMessage
if data[32+lengthOfNumberOfAddresses+(38*i)] == '\x7F':
print 'Ignoring IP address in loopback range:', hostFromAddrMessage
continue
if data[32+lengthOfNumberOfAddresses+(38*i)] == '\x0A':
print 'Ignoring IP address in private range:', hostFromAddrMessage
continue
if data[32+lengthOfNumberOfAddresses+(38*i):34+lengthOfNumberOfAddresses+(38*i)] == '\xC0A8':
print 'Ignoring IP address in private range:', hostFromAddrMessage
continue
timeSomeoneElseReceivedMessageFromThisNode, = unpack('>Q',data[lengthOfNumberOfAddresses+(38*i):8+lengthOfNumberOfAddresses+(38*i)]) #This is the 'time' value in the received addr message. 64-bit.
if recaddrStream not in knownNodes: #knownNodes is a dictionary of dictionaries with one outer dictionary for each stream. If the outer stream dictionary doesn't exist yet then we must make it.
knownNodesLock.acquire()
knownNodes[recaddrStream][hostFromAddrMessage] = (recaddrPort, timeSomeoneElseReceivedMessageFromThisNode)
knownNodes[recaddrStream] = {}
knownNodesLock.release()
print 'added new node', hostFromAddrMessage, 'to knownNodes in stream', recaddrStream
needToWriteKnownNodesToDisk = True
hostDetails = (timeSomeoneElseReceivedMessageFromThisNode, recaddrStream, recaddrServices, hostFromAddrMessage, recaddrPort)
listOfAddressDetailsToBroadcastToPeers.append(hostDetails)
else:
PORT, timeLastReceivedMessageFromThisNode = knownNodes[recaddrStream][hostFromAddrMessage]#PORT in this case is either the port we used to connect to the remote node, or the port that was specified by someone else in a past addr message.
if (timeLastReceivedMessageFromThisNode < timeSomeoneElseReceivedMessageFromThisNode) and (timeSomeoneElseReceivedMessageFromThisNode < int(time.time())):
knownNodesLock.acquire()
knownNodes[recaddrStream][hostFromAddrMessage] = (PORT, timeSomeoneElseReceivedMessageFromThisNode)
knownNodesLock.release()
if PORT != recaddrPort:
print 'Strange occurance: The port specified in an addr message', str(recaddrPort),'does not match the port',str(PORT),'that this program (or some other peer) used to connect to it',str(hostFromAddrMessage),'. Perhaps they changed their port or are using a strange NAT configuration.'
if needToWriteKnownNodesToDisk: #Runs if any nodes were new to us. Also, share those nodes with our peers.
output = open(appdata + 'knownnodes.dat', 'wb')
knownNodesLock.acquire()
pickle.dump(knownNodes, output)
knownNodesLock.release()
output.close()
self.broadcastaddr(listOfAddressDetailsToBroadcastToPeers)
printLock.acquire()
print 'knownNodes currently has', len(knownNodes[self.streamNumber]), 'nodes for this stream.'
printLock.release()
if hostFromAddrMessage not in knownNodes[recaddrStream]:
if len(knownNodes[recaddrStream]) < 20000 and timeSomeoneElseReceivedMessageFromThisNode > (int(time.time())-10800) and timeSomeoneElseReceivedMessageFromThisNode < (int(time.time()) + 10800): #If we have more than 20000 nodes in our list already then just forget about adding more. Also, make sure that the time that someone else received a message from this node is within three hours from now.
knownNodesLock.acquire()
knownNodes[recaddrStream][hostFromAddrMessage] = (recaddrPort, timeSomeoneElseReceivedMessageFromThisNode)
knownNodesLock.release()
print 'added new node', hostFromAddrMessage, 'to knownNodes in stream', recaddrStream
needToWriteKnownNodesToDisk = True
hostDetails = (timeSomeoneElseReceivedMessageFromThisNode, recaddrStream, recaddrServices, hostFromAddrMessage, recaddrPort)
listOfAddressDetailsToBroadcastToPeers.append(hostDetails)
else:
PORT, timeLastReceivedMessageFromThisNode = knownNodes[recaddrStream][hostFromAddrMessage]#PORT in this case is either the port we used to connect to the remote node, or the port that was specified by someone else in a past addr message.
if (timeLastReceivedMessageFromThisNode < timeSomeoneElseReceivedMessageFromThisNode) and (timeSomeoneElseReceivedMessageFromThisNode < int(time.time())):
knownNodesLock.acquire()
knownNodes[recaddrStream][hostFromAddrMessage] = (PORT, timeSomeoneElseReceivedMessageFromThisNode)
knownNodesLock.release()
if PORT != recaddrPort:
print 'Strange occurance: The port specified in an addr message', str(recaddrPort),'does not match the port',str(PORT),'that this program (or some other peer) used to connect to it',str(hostFromAddrMessage),'. Perhaps they changed their port or are using a strange NAT configuration.'
if needToWriteKnownNodesToDisk: #Runs if any nodes were new to us. Also, share those nodes with our peers.
output = open(appdata + 'knownnodes.dat', 'wb')
knownNodesLock.acquire()
pickle.dump(knownNodes, output)
knownNodesLock.release()
output.close()
self.broadcastaddr(listOfAddressDetailsToBroadcastToPeers)
printLock.acquire()
print 'knownNodes currently has', len(knownNodes[self.streamNumber]), 'nodes for this stream.'
printLock.release()
#Function runs when we want to broadcast an addr message to all of our peers. Runs when we learn of nodes that we didn't previously know about and want to share them with our peers.
def broadcastaddr(self,listOfAddressDetailsToBroadcastToPeers):
@ -1448,7 +1574,7 @@ class receiveDataThread(QThread):
payload = ''
for hostDetails in listOfAddressDetailsToBroadcastToPeers:
timeLastReceivedMessageFromThisNode, streamNumber, services, host, port = hostDetails
payload += pack('>I',timeLastReceivedMessageFromThisNode)
payload += pack('>Q',timeLastReceivedMessageFromThisNode) #now uses 64-bit time
payload += pack('>I',streamNumber)
payload += pack('>q',services) #service bit flags offered by this node
payload += '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xFF\xFF' + socket.inet_aton(host)
@ -1503,7 +1629,10 @@ class receiveDataThread(QThread):
PORT, timeLastReceivedMessageFromThisNode = value
if timeLastReceivedMessageFromThisNode > (int(time.time())- maximumAgeOfNodesThatIAdvertiseToOthers): #If it is younger than 3 hours old..
numberOfAddressesInAddrMessage += 1
payload += pack('>I',timeLastReceivedMessageFromThisNode)
if self.remoteProtocolVersion == 1:
payload += pack('>I',timeLastReceivedMessageFromThisNode) #32-bit time
else:
payload += pack('>Q',timeLastReceivedMessageFromThisNode) #64-bit time
payload += pack('>I',self.streamNumber)
payload += pack('>q',1) #service bit flags offered by this node
payload += '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xFF\xFF' + socket.inet_aton(HOST)
@ -1512,7 +1641,10 @@ class receiveDataThread(QThread):
PORT, timeLastReceivedMessageFromThisNode = value
if timeLastReceivedMessageFromThisNode > (int(time.time())- maximumAgeOfNodesThatIAdvertiseToOthers): #If it is younger than 3 hours old..
numberOfAddressesInAddrMessage += 1
payload += pack('>I',timeLastReceivedMessageFromThisNode)
if self.remoteProtocolVersion == 1:
payload += pack('>I',timeLastReceivedMessageFromThisNode) #32-bit time
else:
payload += pack('>Q',timeLastReceivedMessageFromThisNode) #64-bit time
payload += pack('>I',self.streamNumber*2)
payload += pack('>q',1) #service bit flags offered by this node
payload += '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xFF\xFF' + socket.inet_aton(HOST)
@ -1521,7 +1653,10 @@ class receiveDataThread(QThread):
PORT, timeLastReceivedMessageFromThisNode = value
if timeLastReceivedMessageFromThisNode > (int(time.time())- maximumAgeOfNodesThatIAdvertiseToOthers): #If it is younger than 3 hours old..
numberOfAddressesInAddrMessage += 1
payload += pack('>I',timeLastReceivedMessageFromThisNode)
if self.remoteProtocolVersion == 1:
payload += pack('>I',timeLastReceivedMessageFromThisNode) #32-bit time
else:
payload += pack('>Q',timeLastReceivedMessageFromThisNode) #64-bit time
payload += pack('>I',(self.streamNumber*2)+1)
payload += pack('>q',1) #service bit flags offered by this node
payload += '\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\xFF\xFF' + socket.inet_aton(HOST)
@ -1576,6 +1711,7 @@ class receiveDataThread(QThread):
print 'Closing connection to myself: ', self.HOST
printLock.release()
return
broadcastToSendDataQueues((0,'setRemoteProtocolVersion',(self.HOST,self.remoteProtocolVersion)))
knownNodesLock.acquire()
knownNodes[self.streamNumber][self.HOST] = (self.remoteNodeIncomingPort, int(time.time()))
@ -1728,19 +1864,31 @@ class sendDataThread(QThread):
print 'setting the stream number in the sendData thread (ID:',id(self), ') to', specifiedStreamNumber
printLock.release()
self.streamNumber = specifiedStreamNumber
elif command == 'setRemoteProtocolVersion':
hostInMessage, specifiedRemoteProtocolVersion = data
if hostInMessage == self.HOST:
printLock.acquire()
print 'setting the remote node\'s protocol version in the sendData thread (ID:',id(self), ') to', specifiedRemoteProtocolVersion
printLock.release()
self.remoteProtocolVersion = specifiedRemoteProtocolVersion
elif command == 'sendaddr':
try:
#To prevent some network analysis, 'leak' the data out to our peer after waiting a random amount of time unless we have a long list of messages in our queue to send.
random.seed()
time.sleep(random.randrange(0, 10))
self.sock.sendall(data)
self.lastTimeISentData = int(time.time())
except:
print 'self.sock.sendall failed'
self.sock.close()
sendDataQueues.remove(self.mailbox)
print 'sendDataThread thread', self, 'ending now'
break
if self.remoteProtocolVersion == 1:
printLock.acquire()
print 'a sendData thread is not sending an addr message to this particular peer ('+self.HOST+') because their protocol version is 1.'
printLock.release()
else:
try:
#To prevent some network analysis, 'leak' the data out to our peer after waiting a random amount of time unless we have a long list of messages in our queue to send.
random.seed()
time.sleep(random.randrange(0, 10))
self.sock.sendall(data)
self.lastTimeISentData = int(time.time())
except:
print 'self.sock.sendall failed'
self.sock.close()
sendDataQueues.remove(self.mailbox)
print 'sendDataThread thread', self, 'ending now'
break
elif command == 'sendinv':
if data not in self.objectsOfWhichThisRemoteNodeIsAlreadyAware:
payload = '\x01' + data
@ -3993,18 +4141,7 @@ class MyForm(QtGui.QMainWindow):
sqlSubmitQueue.put('commit')
sqlLock.release()
"""try:
fromLabel = config.get(fromAddress, 'label')
except:
fromLabel = ''
if fromLabel == '':
fromLabel = fromAddress"""
toLabel = ''
t = (toAddress,)
sqlLock.acquire()
sqlSubmitQueue.put('''select label from addressbook where address=?''')
@ -4018,30 +4155,6 @@ class MyForm(QtGui.QMainWindow):
self.displayNewSentMessage(toAddress,toLabel,fromAddress, subject, message, ackdata)
workerQueue.put(('sendmessage',toAddress))
"""self.ui.tableWidgetSent.insertRow(0)
if toLabel == '':
newItem = QtGui.QTableWidgetItem(unicode(toAddress,'utf-8'))
else:
newItem = QtGui.QTableWidgetItem(unicode(toLabel,'utf-8'))
newItem.setData(Qt.UserRole,str(toAddress))
self.ui.tableWidgetSent.setItem(0,0,newItem)
if fromLabel == '':
newItem = QtGui.QTableWidgetItem(unicode(fromAddress,'utf-8'))
else:
newItem = QtGui.QTableWidgetItem(unicode(fromLabel,'utf-8'))
newItem.setData(Qt.UserRole,str(fromAddress))
self.ui.tableWidgetSent.setItem(0,1,newItem)
newItem = QtGui.QTableWidgetItem(unicode(subject,'utf-8)'))
newItem.setData(Qt.UserRole,unicode(message,'utf-8)'))
self.ui.tableWidgetSent.setItem(0,2,newItem)
newItem = myTableWidgetItem('Just pressed ''send'' ' + unicode(strftime(config.get('bitmessagesettings', 'timeformat'),localtime(int(time.time()))),'utf-8'))
newItem.setData(Qt.UserRole,QByteArray(ackdata))
newItem.setData(33,int(time.time()))
self.ui.tableWidgetSent.setItem(0,3,newItem)
self.ui.textEditSentMessage.setPlainText(self.ui.tableWidgetSent.item(0,2).data(Qt.UserRole).toPyObject())"""
self.ui.comboBoxSendFrom.setCurrentIndex(0)
self.ui.labelFrom.setText('')
self.ui.lineEditTo.setText('')