Merge pull request #518 from Atheros1/master

Chan bugfix

Makefile

@@ -1,5 +1,5 @@
 APP=pybitmessage
-VERSION=0.4.0
+VERSION=0.4.1
 RELEASE=1
 ARCH_TYPE=`uname -m`
 PREFIX?=/usr/local

arch.sh

@@ -2,8 +2,8 @@
 
 GIT_APP=PyBitmessage
 APP=pybitmessage
-PREV_VERSION=0.4.0
+PREV_VERSION=0.4.1
-VERSION=0.4.0
+VERSION=0.4.1
 RELEASE=1
 ARCH_TYPE=any
 CURRDIR=`pwd`

archpackage/PKGBUILD

@@ -1,6 +1,6 @@
 # Maintainer: Bob Mottram (4096 bits) <bob@robotics.uk.to>
 pkgname=pybitmessage
-pkgver=0.4.0
+pkgver=0.4.1
 pkgrel=1
 pkgdesc="Bitmessage is a P2P communications protocol used to send encrypted messages to another person or to many subscribers. It is decentralized and trustless, meaning that you need-not inherently trust any entities like root certificate authorities. It uses strong authentication which means that the sender of a message cannot be spoofed, and it aims to hide "non-content" data, like the sender and receiver of messages, from passive eavesdroppers like those running warrantless wiretapping programs."
 arch=('any')

debian.sh

@@ -1,8 +1,8 @@
 #!/bin/bash
 
 APP=pybitmessage
-PREV_VERSION=0.4.0
+PREV_VERSION=0.4.1
-VERSION=0.4.0
+VERSION=0.4.1
 RELEASE=1
 ARCH_TYPE=all
 DIR=${APP}-${VERSION}

ebuild.sh

@@ -1,8 +1,8 @@
 #!/bin/bash
 
 APP=pybitmessage
-PREV_VERSION=0.4.0
+PREV_VERSION=0.4.1
-VERSION=0.4.0
+VERSION=0.4.1
 RELEASE=1
 SOURCEDIR=.
 ARCH_TYPE=`uname -m`

generate.sh

@@ -4,7 +4,7 @@
 
 rm -f Makefile rpmpackage/*.spec
 
-packagemonkey -n "PyBitmessage" --version "0.4.0" --dir "." -l "mit" \
+packagemonkey -n "PyBitmessage" --version "0.4.1" --dir "." -l "mit" \
     -e "Bob Mottram (4096 bits) <bob@robotics.uk.to>" \
     --brief "Send encrypted messages" \
     --desc "Bitmessage is a P2P communications protocol used to send " \

puppy.sh

@@ -1,8 +1,8 @@
 #!/bin/bash
 
 APP=pybitmessage
-PREV_VERSION=0.4.0
+PREV_VERSION=0.4.1
-VERSION=0.4.0
+VERSION=0.4.1
 RELEASE=1
 BUILDDIR=~/petbuild
 CURRDIR=`pwd`

rpm.sh

@@ -1,8 +1,8 @@
 #!/bin/bash
 
 APP=pybitmessage
-PREV_VERSION=0.4.0
+PREV_VERSION=0.4.1
-VERSION=0.4.0
+VERSION=0.4.1
 RELEASE=1
 SOURCEDIR=.
 ARCH_TYPE=`uname -m`

rpmpackage/pybitmessage.spec

@@ -1,5 +1,5 @@
 Name: pybitmessage
-Version: 0.4.0
+Version: 0.4.1
 Release: 1%{?dist}
 Summary: Send encrypted messages
 License: MIT

slack.sh

@@ -1,8 +1,8 @@
 #!/bin/bash
 
 APP=pybitmessage
-PREV_VERSION=0.4.0
+PREV_VERSION=0.4.1
-VERSION=0.4.0
+VERSION=0.4.1
 RELEASE=1
 ARCH_TYPE=`uname -m`
 BUILDDIR=~/slackbuild

src/bitmessageqt/__init__.py

@@ -1564,15 +1564,6 @@ class MyForm(QtGui.QMainWindow):
                             "MainWindow", "Error: You must specify a From address. If you don\'t have one, go to the \'Your Identities\' tab."))
                     else:
                         toAddress = addBMIfNotPresent(toAddress)
-                        try:
-                            shared.config.get(toAddress, 'enabled')
-                            # The toAddress is one owned by me.
-                            if not shared.safeConfigGetBoolean(toAddress, 'chan'):
-                                QMessageBox.about(self, _translate("MainWindow", "Sending to your address"), _translate(
-                                    "MainWindow", "Error: One of the addresses to which you are sending a message, %1, is yours. Unfortunately the Bitmessage client cannot process its own messages. Please try running a second client on a different computer or within a VM.").arg(toAddress))
-                                continue
-                        except:
-                            pass
                         if addressVersionNumber > 4 or addressVersionNumber <= 1:
                             QMessageBox.about(self, _translate("MainWindow", "Address version number"), _translate(
                                 "MainWindow", "Concerning the address %1, Bitmessage cannot understand address version numbers of %2. Perhaps upgrade Bitmessage to the latest version.").arg(toAddress).arg(str(addressVersionNumber)))

src/build_osx.py

@@ -1,7 +1,7 @@
 from setuptools import setup
 
 name = "Bitmessage"
-version = "0.4.0"
+version = "0.4.1"
 mainscript = ["bitmessagemain.py"]
 
 setup(

src/class_receiveDataThread.py

@@ -514,8 +514,9 @@ class receiveDataThread(threading.Thread):
                 # the proof of work ourselves, which this program is programmed
                 # to not do.)
                 sqlExecute(
-                    '''INSERT INTO pubkeys VALUES (?,?,?,?)''',
+                    '''INSERT INTO pubkeys VALUES (?,?,?,?,?)''',
                     ripe.digest(),
+                    sendersAddressVersion,
                     '\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF' + '\xFF\xFF\xFF\xFF' + data[beginningOfPubkeyPosition:endOfPubkeyPosition],
                     int(time.time()),
                     'yes')
@@ -655,8 +656,9 @@ class receiveDataThread(threading.Thread):
 
             # Let's store the public key in case we want to reply to this
             # person.
-            sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?)''',
+            sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?,?)''',
                        ripe.digest(),
+                       sendersAddressVersion,
                        '\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF' + '\xFF\xFF\xFF\xFF' + decryptedData[beginningOfPubkeyPosition:endOfPubkeyPosition],
                        int(time.time()),
                        'yes')
@@ -806,8 +808,9 @@ class receiveDataThread(threading.Thread):
 
             # Let's store the public key in case we want to reply to this person.
             sqlExecute(
-                '''INSERT INTO pubkeys VALUES (?,?,?,?)''',
+                '''INSERT INTO pubkeys VALUES (?,?,?,?,?)''',
                 calculatedRipe,
+                sendersAddressVersion,
                 '\x00\x00\x00\x00\x00\x00\x00\x01' + decryptedData[beginningOfPubkeyPosition:endOfPubkeyPosition],
                 int(time.time()),
                 'yes')
@@ -1070,8 +1073,9 @@ class receiveDataThread(threading.Thread):
             # person.
             if sendersAddressVersionNumber <= 3:
                 sqlExecute(
-                    '''INSERT INTO pubkeys VALUES (?,?,?,?)''',
+                    '''INSERT INTO pubkeys VALUES (?,?,?,?,?)''',
                     ripe.digest(),
+                    sendersAddressVersionNumber,
                     '\xFF\xFF\xFF\xFF\xFF\xFF\xFF\xFF' + '\xFF\xFF\xFF\xFF' + decryptedData[messageVersionLength:endOfThePublicKeyPosition],
                     int(time.time()),
                     'yes')
@@ -1081,8 +1085,9 @@ class receiveDataThread(threading.Thread):
                 self.possibleNewPubkey(ripe=ripe.digest())
             elif sendersAddressVersionNumber >= 4:
                 sqlExecute(
-                    '''INSERT INTO pubkeys VALUES (?,?,?,?)''',
+                    '''INSERT INTO pubkeys VALUES (?,?,?,?,?)''',
                     ripe.digest(),
+                    sendersAddressVersionNumber,
                     '\x00\x00\x00\x00\x00\x00\x00\x01' + decryptedData[messageVersionLength:endOfThePublicKeyPosition],
                     int(time.time()),
                     'yes')
@@ -1409,15 +1414,15 @@ class receiveDataThread(threading.Thread):
 
 
             queryreturn = sqlQuery(
-                '''SELECT usedpersonally FROM pubkeys WHERE hash=? AND usedpersonally='yes' ''', ripe)
+                '''SELECT usedpersonally FROM pubkeys WHERE hash=? AND addressversion=? AND usedpersonally='yes' ''', ripe, addressVersion)
             if queryreturn != []:  # if this pubkey is already in our database and if we have used it personally:
                 print 'We HAVE used this pubkey personally. Updating time.'
-                t = (ripe, data, embeddedTime, 'yes')
+                t = (ripe, addressVersion, data, embeddedTime, 'yes')
             else:
                 print 'We have NOT used this pubkey personally. Inserting in database.'
-                t = (ripe, data, embeddedTime, 'no')
+                t = (ripe, addressVersion, data, embeddedTime, 'no')
                      # This will also update the embeddedTime.
-            sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?)''', *t)
+            sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?,?)''', *t)
             # shared.workerQueue.put(('newpubkey',(addressVersion,streamNumber,ripe)))
             self.possibleNewPubkey(ripe = ripe)
         if addressVersion == 3:
@@ -1466,19 +1471,18 @@ class receiveDataThread(threading.Thread):
                 print 'publicEncryptionKey in hex:', publicEncryptionKey.encode('hex')
 
 
-            queryreturn = sqlQuery('''SELECT usedpersonally FROM pubkeys WHERE hash=? AND usedpersonally='yes' ''', ripe)
+            queryreturn = sqlQuery('''SELECT usedpersonally FROM pubkeys WHERE hash=? AND addressversion=? AND usedpersonally='yes' ''', ripe, addressVersion)
             if queryreturn != []:  # if this pubkey is already in our database and if we have used it personally:
                 print 'We HAVE used this pubkey personally. Updating time.'
-                t = (ripe, data, embeddedTime, 'yes')
+                t = (ripe, addressVersion, data, embeddedTime, 'yes')
             else:
                 print 'We have NOT used this pubkey personally. Inserting in database.'
-                t = (ripe, data, embeddedTime, 'no')
+                t = (ripe, addressVersion, data, embeddedTime, 'no')
                      # This will also update the embeddedTime.
-            sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?)''', *t)
+            sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?,?)''', *t)
             self.possibleNewPubkey(ripe = ripe)
 
         if addressVersion == 4:
-            print 'length of v4 pubkey:', len(data)
             if len(data) < 350:  # sanity check.
                 print '(within processpubkey) payloadLength less than 350. Sanity check failed.'
                 return
@@ -1554,8 +1558,8 @@ class receiveDataThread(threading.Thread):
                 print 'publicSigningKey in hex:', publicSigningKey.encode('hex')
                 print 'publicEncryptionKey in hex:', publicEncryptionKey.encode('hex')
 
-            t = (ripe, signedData, embeddedTime, 'yes')
+            t = (ripe, addressVersion, signedData, embeddedTime, 'yes')
-            sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?)''', *t)
+            sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?,?)''', *t)
             
             fromAddress = encodeAddress(addressVersion, streamNumber, ripe)
             # That this point we know that we have been waiting on this pubkey.

src/class_singleWorker.py

@@ -3,6 +3,7 @@ import shared
 import time
 from time import strftime, localtime, gmtime
 import random
+from subprocess import call  # used when the API must execute an outside program
 from addresses import *
 import highlevelcrypto
 import proofofwork
@@ -11,6 +12,7 @@ from class_addressGenerator import pointMult
 import tr
 from debug import logger
 from helper_sql import *
+import helper_inbox
 
 # This thread, of which there is only one, does the heavy lifting:
 # calculating POWs.
@@ -156,6 +158,10 @@ class singleWorker(threading.Thread):
     # send messages to "ourselves".
     def sendOutOrStoreMyV3Pubkey(self, hash): 
         myAddress = shared.myAddressesByHash[hash]
+        if shared.safeConfigGetBoolean(myAddress, 'chan'):
+            with shared.printLock:
+                print 'This is a chan address. Not sending pubkey.'
+            return
         status, addressVersionNumber, streamNumber, hash = decodeAddress(
             myAddress)
         embeddedTime = int(time.time() + random.randrange(
@@ -197,49 +203,39 @@ class singleWorker(threading.Thread):
         payload += encodeVarint(len(signature))
         payload += signature
 
-        if not shared.safeConfigGetBoolean(myAddress, 'chan'):
+        # Do the POW for this pubkey message
-            # Do the POW for this pubkey message
+        target = 2 ** 64 / ((len(payload) + shared.networkDefaultPayloadLengthExtraBytes +
-            target = 2 ** 64 / ((len(payload) + shared.networkDefaultPayloadLengthExtraBytes +
+                             8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
-                                 8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
+        print '(For pubkey message) Doing proof of work...'
-            print '(For pubkey message) Doing proof of work...'
+        initialHash = hashlib.sha512(payload).digest()
-            initialHash = hashlib.sha512(payload).digest()
+        trialValue, nonce = proofofwork.run(target, initialHash)
-            trialValue, nonce = proofofwork.run(target, initialHash)
+        print '(For pubkey message) Found proof of work', trialValue, 'Nonce:', nonce
-            print '(For pubkey message) Found proof of work', trialValue, 'Nonce:', nonce
 
-            payload = pack('>Q', nonce) + payload
+        payload = pack('>Q', nonce) + payload
-            inventoryHash = calculateInventoryHash(payload)
+        inventoryHash = calculateInventoryHash(payload)
-            objectType = 'pubkey'
+        objectType = 'pubkey'
-            shared.inventory[inventoryHash] = (
+        shared.inventory[inventoryHash] = (
-                objectType, streamNumber, payload, embeddedTime,'')
+            objectType, streamNumber, payload, embeddedTime,'')
-            shared.inventorySets[streamNumber].add(inventoryHash)
+        shared.inventorySets[streamNumber].add(inventoryHash)
 
-            with shared.printLock:
+        with shared.printLock:
-                print 'broadcasting inv with hash:', inventoryHash.encode('hex')
+            print 'broadcasting inv with hash:', inventoryHash.encode('hex')
 
-            shared.broadcastToSendDataQueues((
+        shared.broadcastToSendDataQueues((
-                streamNumber, 'advertiseobject', inventoryHash))
+            streamNumber, 'advertiseobject', inventoryHash))
-            shared.UISignalQueue.put(('updateStatusBar', ''))
+        shared.UISignalQueue.put(('updateStatusBar', ''))
-        # If this is a chan address then we won't send out the pubkey over the
-        # network but rather will only store it in our pubkeys table so that
-        # we can send messages to "ourselves".
-        if shared.safeConfigGetBoolean(myAddress, 'chan'):
-            payload = '\x00' * 8 + payload # Attach a fake nonce on the front
-                # just so that it is in the correct format.
-            sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?)''',
-                       hash,
-                       payload,
-                       embeddedTime,
-                       'yes')
         shared.config.set(
             myAddress, 'lastpubkeysendtime', str(int(time.time())))
         with open(shared.appdata + 'keys.dat', 'wb') as configfile:
             shared.config.write(configfile)
 
     # If this isn't a chan address, this function assembles the pubkey data,
-    # does the necessary POW and sends it out. If it *is* a chan then it
+    # does the necessary POW and sends it out. 
-    # assembles the pubkey and stores is in the pubkey table so that we can
-    # send messages to "ourselves".
     def sendOutOrStoreMyV4Pubkey(self, myAddress):
+        if shared.safeConfigGetBoolean(myAddress, 'chan'):
+            with shared.printLock:
+                print 'This is a chan address. Not sending pubkey.'
+            return
         status, addressVersionNumber, streamNumber, hash = decodeAddress(
             myAddress)
         embeddedTime = int(time.time() + random.randrange(
@@ -284,52 +280,41 @@ class singleWorker(threading.Thread):
         dataToEncrypt += encodeVarint(len(signature))
         dataToEncrypt += signature
 
-        if not shared.safeConfigGetBoolean(myAddress, 'chan'):
+        # Let us encrypt the necessary data. We will use a hash of the data
-            # Let us encrypt the necessary data. We will use a hash of the data
+        # contained in an address as a decryption key. This way in order to
-            # contained in an address as a decryption key. This way in order to
+        # read the public keys in a pubkey message, a node must know the address
-            # read the public keys in a pubkey message, a node must know the address
+        # first. We'll also tag, unencrypted, the pubkey with part of the hash
-            # first. We'll also tag, unencrypted, the pubkey with part of the hash
+        # so that nodes know which pubkey object to try to decrypt when they
-            # so that nodes know which pubkey object to try to decrypt when they
+        # want to send a message.
-            # want to send a message.
+        doubleHashOfAddressData = hashlib.sha512(hashlib.sha512(encodeVarint(
-            doubleHashOfAddressData = hashlib.sha512(hashlib.sha512(encodeVarint(
+            addressVersionNumber) + encodeVarint(streamNumber) + hash).digest()).digest()
-                addressVersionNumber) + encodeVarint(streamNumber) + hash).digest()).digest()
+        payload += doubleHashOfAddressData[32:] # the tag
-            payload += doubleHashOfAddressData[32:] # the tag
+        privEncryptionKey = doubleHashOfAddressData[:32]
-            privEncryptionKey = doubleHashOfAddressData[:32]
+        pubEncryptionKey = pointMult(privEncryptionKey)
-            pubEncryptionKey = pointMult(privEncryptionKey)
+        payload += highlevelcrypto.encrypt(
-            payload += highlevelcrypto.encrypt(
+            dataToEncrypt, pubEncryptionKey.encode('hex'))
-                dataToEncrypt, pubEncryptionKey.encode('hex'))
 
-            # Do the POW for this pubkey message
+        # Do the POW for this pubkey message
-            target = 2 ** 64 / ((len(payload) + shared.networkDefaultPayloadLengthExtraBytes +
+        target = 2 ** 64 / ((len(payload) + shared.networkDefaultPayloadLengthExtraBytes +
-                                 8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
+                             8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
-            print '(For pubkey message) Doing proof of work...'
+        print '(For pubkey message) Doing proof of work...'
-            initialHash = hashlib.sha512(payload).digest()
+        initialHash = hashlib.sha512(payload).digest()
-            trialValue, nonce = proofofwork.run(target, initialHash)
+        trialValue, nonce = proofofwork.run(target, initialHash)
-            print '(For pubkey message) Found proof of work', trialValue, 'Nonce:', nonce
+        print '(For pubkey message) Found proof of work', trialValue, 'Nonce:', nonce
 
-            payload = pack('>Q', nonce) + payload
+        payload = pack('>Q', nonce) + payload
-            inventoryHash = calculateInventoryHash(payload)
+        inventoryHash = calculateInventoryHash(payload)
-            objectType = 'pubkey'
+        objectType = 'pubkey'
-            shared.inventory[inventoryHash] = (
+        shared.inventory[inventoryHash] = (
-                objectType, streamNumber, payload, embeddedTime, doubleHashOfAddressData[32:])
+            objectType, streamNumber, payload, embeddedTime, doubleHashOfAddressData[32:])
-            shared.inventorySets[streamNumber].add(inventoryHash)
+        shared.inventorySets[streamNumber].add(inventoryHash)
 
-            with shared.printLock:
+        with shared.printLock:
-                print 'broadcasting inv with hash:', inventoryHash.encode('hex')
+            print 'broadcasting inv with hash:', inventoryHash.encode('hex')
 
-            shared.broadcastToSendDataQueues((
+        shared.broadcastToSendDataQueues((
-                streamNumber, 'advertiseobject', inventoryHash))
+            streamNumber, 'advertiseobject', inventoryHash))
-            shared.UISignalQueue.put(('updateStatusBar', ''))
+        shared.UISignalQueue.put(('updateStatusBar', ''))
-        # If this is a chan address then we won't send out the pubkey over the
-        # network but rather will only store it in our pubkeys table so that
-        # we can send messages to "ourselves".
-        if shared.safeConfigGetBoolean(myAddress, 'chan'):
-
-            sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?)''',
-                       hash,
-                       dataToStoreInOurPubkeysTable,
-                       embeddedTime,
-                       'yes')
         shared.config.set(
             myAddress, 'lastpubkeysendtime', str(int(time.time())))
         with open(shared.appdata + 'keys.dat', 'wb') as configfile:
@@ -369,8 +354,6 @@ class singleWorker(threading.Thread):
             pubEncryptionKey = highlevelcrypto.privToPub(
                 privEncryptionKeyHex).decode('hex')
 
-            print 'embedding pubEncryptionKey:', pubEncryptionKey.encode('hex')
-
             payload = pack('>Q', (int(time.time()) + random.randrange(
                 -300, 300)))  # the current time plus or minus five minutes
             if addressVersionNumber <= 3:
@@ -382,8 +365,6 @@ class singleWorker(threading.Thread):
                 doubleHashOfAddressData = hashlib.sha512(hashlib.sha512(encodeVarint(
                     addressVersionNumber) + encodeVarint(streamNumber) + ripe).digest()).digest()
                 payload += doubleHashOfAddressData[32:]  # the tag
-                print 'embeddedTag is', doubleHashOfAddressData[32:].encode('hex')
-                print 'embeddedTag is', repr(doubleHashOfAddressData[32:])
 
             if addressVersionNumber <= 3:
                 dataToEncrypt = encodeVarint(2)  # broadcast version
@@ -458,8 +439,14 @@ class singleWorker(threading.Thread):
         for row in queryreturn:  # For each address to which we need to send a message, check to see if we have its pubkey already.
             toaddress, = row
             status, toAddressVersion, toStreamNumber, toRipe = decodeAddress(toaddress)
+            # If we are sending a message to ourselves or a chan then we won't need an entry in the pubkeys table; we can calculate the needed pubkey using the private keys in our keys.dat file.
+            if shared.config.has_section(toaddress):
+                sqlExecute(
+                    '''UPDATE sent SET status='doingmsgpow' WHERE toaddress=? AND status='msgqueued' ''',
+                    toaddress)
+                continue
             queryreturn = sqlQuery(
-                '''SELECT hash FROM pubkeys WHERE hash=? ''', toRipe)
+                '''SELECT hash FROM pubkeys WHERE hash=? AND addressversion=?''', toRipe, toAddressVersion)
             if queryreturn != []:  # If we have the needed pubkey in the pubkey table already, set the status to doingmsgpow (we'll do it further down)
                 sqlExecute(
                     '''UPDATE sent SET status='doingmsgpow' WHERE toaddress=? AND status='msgqueued' ''',
@@ -523,130 +510,154 @@ class singleWorker(threading.Thread):
             int(time.time()) - 2419200)
         for row in queryreturn:  # For each message we need to send..
             toaddress, toripe, fromaddress, subject, message, ackdata, status = row
-            # There is a remote possibility that we may no longer have the
-            # recipient's pubkey. Let us make sure we still have it or else the
-            # sendMsg function will appear to freeze. This can happen if the
-            # user sends a message but doesn't let the POW function finish,
-            # then leaves their client off for a long time which could cause
-            # the needed pubkey to expire and be deleted.
-            queryreturn = sqlQuery(
-                '''SELECT hash FROM pubkeys WHERE hash=? ''',
-                toripe)
-            if queryreturn == [] and toripe not in shared.neededPubkeys:
-                # We no longer have the needed pubkey and we haven't requested
-                # it.
-                with shared.printLock:
-                    sys.stderr.write(
-                        'For some reason, the status of a message in our outbox is \'doingmsgpow\' even though we lack the pubkey. Here is the RIPE hash of the needed pubkey: %s\n' % toripe.encode('hex'))
-
-                sqlExecute(
-                    '''UPDATE sent SET status='msgqueued' WHERE toaddress=? AND status='doingmsgpow' ''', toaddress)
-                shared.UISignalQueue.put(('updateSentItemStatusByHash', (
-                    toripe, tr.translateText("MainWindow",'Sending a request for the recipient\'s encryption key.'))))
-                self.requestPubKey(toaddress)
-                continue
-            shared.ackdataForWhichImWatching[ackdata] = 0
             toStatus, toAddressVersionNumber, toStreamNumber, toHash = decodeAddress(
                 toaddress)
             fromStatus, fromAddressVersionNumber, fromStreamNumber, fromHash = decodeAddress(
                 fromaddress)
-            shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
-                ackdata, tr.translateText("MainWindow", "Looking up the receiver\'s public key"))))
-            with shared.printLock:
-                print 'Found a message in our database that needs to be sent with this pubkey.'
-                print 'First 150 characters of message:', repr(message[:150])
 
-
+            if not shared.config.has_section(toaddress):
-            # mark the pubkey as 'usedpersonally' so that we don't ever delete
+                # There is a remote possibility that we may no longer have the
-            # it.
+                # recipient's pubkey. Let us make sure we still have it or else the
-            sqlExecute(
+                # sendMsg function will appear to freeze. This can happen if the
-                '''UPDATE pubkeys SET usedpersonally='yes' WHERE hash=?''',
+                # user sends a message but doesn't let the POW function finish,
-                toripe)
+                # then leaves their client off for a long time which could cause
-            # Let us fetch the recipient's public key out of our database. If
+                # the needed pubkey to expire and be deleted.
-            # the required proof of work difficulty is too hard then we'll
+                queryreturn = sqlQuery(
-            # abort.
+                    '''SELECT hash FROM pubkeys WHERE hash=? AND addressversion=?''',
-            queryreturn = sqlQuery(
+                    toripe,
-                'SELECT transmitdata FROM pubkeys WHERE hash=?',
+                    toAddressVersionNumber)
-                toripe)
+                if queryreturn == [] and toripe not in shared.neededPubkeys:
-            if queryreturn == []:
+                    # We no longer have the needed pubkey and we haven't requested
-                with shared.printLock:
+                    # it.
-                    sys.stderr.write(
+                    with shared.printLock:
-                        '(within sendMsg) The needed pubkey was not found. This should never happen. Aborting send.\n')
+                        sys.stderr.write(
-
+                            'For some reason, the status of a message in our outbox is \'doingmsgpow\' even though we lack the pubkey. Here is the RIPE hash of the needed pubkey: %s\n' % toripe.encode('hex'))
-                return
+                    sqlExecute(
-            for row in queryreturn:
+                        '''UPDATE sent SET status='doingpubkeypow' WHERE toaddress=? AND status='doingmsgpow' ''', toaddress)
-                pubkeyPayload, = row
+                    shared.UISignalQueue.put(('updateSentItemStatusByHash', (
-
+                        toripe, tr.translateText("MainWindow",'Sending a request for the recipient\'s encryption key.'))))
-            # The pubkey message is stored the way we originally received it
+                    self.requestPubKey(toaddress)
-            # which means that we need to read beyond things like the nonce and
-            # time to get to the actual public keys.
-            if toAddressVersionNumber <= 3:
-                readPosition = 8  # to bypass the nonce
-            elif toAddressVersionNumber >= 4:
-                readPosition = 0 # the nonce is not included here so we don't need to skip over it.
-            pubkeyEmbeddedTime, = unpack(
-                '>I', pubkeyPayload[readPosition:readPosition + 4])
-            # This section is used for the transition from 32 bit time to 64
-            # bit time in the protocol.
-            if pubkeyEmbeddedTime == 0:
-                pubkeyEmbeddedTime, = unpack(
-                    '>Q', pubkeyPayload[readPosition:readPosition + 8])
-                readPosition += 8
-            else:
-                readPosition += 4
-            readPosition += 1  # to bypass the address version whose length is definitely 1
-            streamNumber, streamNumberLength = decodeVarint(
-                pubkeyPayload[readPosition:readPosition + 10])
-            readPosition += streamNumberLength
-            behaviorBitfield = pubkeyPayload[readPosition:readPosition + 4]
-            # Mobile users may ask us to include their address's RIPE hash on a message
-            # unencrypted. Before we actually do it the sending human must check a box
-            # in the settings menu to allow it.
-            if shared.isBitSetWithinBitfield(behaviorBitfield,30): # if receiver is a mobile device who expects that their address RIPE is included unencrypted on the front of the message..
-                if not shared.safeConfigGetBoolean('bitmessagesettings','willinglysendtomobile'): # if we are Not willing to include the receiver's RIPE hash on the message..
-                    logger.info('The receiver is a mobile user but the sender (you) has not selected that you are willing to send to mobiles. Aborting send.')
-                    shared.UISignalQueue.put(('updateSentItemStatusByAckdata',(ackdata,tr.translateText("MainWindow",'Problem: Destination is a mobile device who requests that the destination be included in the message but this is disallowed in your settings.  %1').arg(unicode(strftime(shared.config.get('bitmessagesettings', 'timeformat'),localtime(int(time.time()))),'utf-8')))))
-                    # if the human changes their setting and then sends another message or restarts their client, this one will send at that time.
                     continue
-            readPosition += 4  # to bypass the bitfield of behaviors
+                shared.ackdataForWhichImWatching[ackdata] = 0
-            # pubSigningKeyBase256 =
+                shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
-            # pubkeyPayload[readPosition:readPosition+64] #We don't use this
+                    ackdata, tr.translateText("MainWindow", "Looking up the receiver\'s public key"))))
-            # key for anything here.
+                with shared.printLock:
-            readPosition += 64
+                    print 'Sending a message. First 150 characters of message:', repr(message[:150])
-            pubEncryptionKeyBase256 = pubkeyPayload[
-                readPosition:readPosition + 64]
-            readPosition += 64
 
-            # Let us fetch the amount of work required by the recipient.
+
-            if toAddressVersionNumber == 2:
+                # mark the pubkey as 'usedpersonally' so that we don't ever delete
+                # it.
+                sqlExecute(
+                    '''UPDATE pubkeys SET usedpersonally='yes' WHERE hash=? and addressversion=?''',
+                    toripe,
+                    toAddressVersionNumber)
+                # Let us fetch the recipient's public key out of our database. If
+                # the required proof of work difficulty is too hard then we'll
+                # abort.
+                queryreturn = sqlQuery(
+                    'SELECT transmitdata FROM pubkeys WHERE hash=? and addressversion=?',
+                    toripe,
+                    toAddressVersionNumber)
+                if queryreturn == []:
+                    with shared.printLock:
+                        sys.stderr.write(
+                            '(within sendMsg) The needed pubkey was not found. This should never happen. Aborting send.\n')
+
+                    return
+                for row in queryreturn:
+                    pubkeyPayload, = row
+
+                # The pubkey message is stored the way we originally received it
+                # which means that we need to read beyond things like the nonce and
+                # time to get to the actual public keys.
+                if toAddressVersionNumber <= 3:
+                    readPosition = 8  # to bypass the nonce
+                elif toAddressVersionNumber >= 4:
+                    readPosition = 0 # the nonce is not included here so we don't need to skip over it.
+                pubkeyEmbeddedTime, = unpack(
+                    '>I', pubkeyPayload[readPosition:readPosition + 4])
+                # This section is used for the transition from 32 bit time to 64
+                # bit time in the protocol.
+                if pubkeyEmbeddedTime == 0:
+                    pubkeyEmbeddedTime, = unpack(
+                        '>Q', pubkeyPayload[readPosition:readPosition + 8])
+                    readPosition += 8
+                else:
+                    readPosition += 4
+                readPosition += 1  # to bypass the address version whose length is definitely 1
+                streamNumber, streamNumberLength = decodeVarint(
+                    pubkeyPayload[readPosition:readPosition + 10])
+                readPosition += streamNumberLength
+                behaviorBitfield = pubkeyPayload[readPosition:readPosition + 4]
+                # Mobile users may ask us to include their address's RIPE hash on a message
+                # unencrypted. Before we actually do it the sending human must check a box
+                # in the settings menu to allow it.
+                if shared.isBitSetWithinBitfield(behaviorBitfield,30): # if receiver is a mobile device who expects that their address RIPE is included unencrypted on the front of the message..
+                    if not shared.safeConfigGetBoolean('bitmessagesettings','willinglysendtomobile'): # if we are Not willing to include the receiver's RIPE hash on the message..
+                        logger.info('The receiver is a mobile user but the sender (you) has not selected that you are willing to send to mobiles. Aborting send.')
+                        shared.UISignalQueue.put(('updateSentItemStatusByAckdata',(ackdata,tr.translateText("MainWindow",'Problem: Destination is a mobile device who requests that the destination be included in the message but this is disallowed in your settings.  %1').arg(unicode(strftime(shared.config.get('bitmessagesettings', 'timeformat'),localtime(int(time.time()))),'utf-8')))))
+                        # if the human changes their setting and then sends another message or restarts their client, this one will send at that time.
+                        continue
+                readPosition += 4  # to bypass the bitfield of behaviors
+                # pubSigningKeyBase256 =
+                # pubkeyPayload[readPosition:readPosition+64] #We don't use this
+                # key for anything here.
+                readPosition += 64
+                pubEncryptionKeyBase256 = pubkeyPayload[
+                    readPosition:readPosition + 64]
+                readPosition += 64
+
+                # Let us fetch the amount of work required by the recipient.
+                if toAddressVersionNumber == 2:
+                    requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
+                    requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
+                    shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
+                        ackdata, tr.translateText("MainWindow", "Doing work necessary to send message.\nThere is no required difficulty for version 2 addresses like this."))))
+                elif toAddressVersionNumber >= 3:
+                    requiredAverageProofOfWorkNonceTrialsPerByte, varintLength = decodeVarint(
+                        pubkeyPayload[readPosition:readPosition + 10])
+                    readPosition += varintLength
+                    requiredPayloadLengthExtraBytes, varintLength = decodeVarint(
+                        pubkeyPayload[readPosition:readPosition + 10])
+                    readPosition += varintLength
+                    if requiredAverageProofOfWorkNonceTrialsPerByte < shared.networkDefaultProofOfWorkNonceTrialsPerByte:  # We still have to meet a minimum POW difficulty regardless of what they say is allowed in order to get our message to propagate through the network.
+                        requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
+                    if requiredPayloadLengthExtraBytes < shared.networkDefaultPayloadLengthExtraBytes:
+                        requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
+                    shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Doing work necessary to send message.\nReceiver\'s required difficulty: %1 and %2").arg(str(float(
+                        requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte)).arg(str(float(requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes)))))
+                    if status != 'forcepow':
+                        if (requiredAverageProofOfWorkNonceTrialsPerByte > shared.config.getint('bitmessagesettings', 'maxacceptablenoncetrialsperbyte') and shared.config.getint('bitmessagesettings', 'maxacceptablenoncetrialsperbyte') != 0) or (requiredPayloadLengthExtraBytes > shared.config.getint('bitmessagesettings', 'maxacceptablepayloadlengthextrabytes') and shared.config.getint('bitmessagesettings', 'maxacceptablepayloadlengthextrabytes') != 0):
+                            # The demanded difficulty is more than we are willing
+                            # to do.
+                            sqlExecute(
+                                '''UPDATE sent SET status='toodifficult' WHERE ackdata=? ''',
+                                ackdata)
+                            shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Problem: The work demanded by the recipient (%1 and %2) is more difficult than you are willing to do.").arg(str(float(requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte)).arg(str(float(
+                                requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes)).arg(unicode(strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
+                            continue
+            else: # if we are sending a message to ourselves or a chan..
+                with shared.printLock:
+                    print 'Sending a message. First 150 characters of message:', repr(message[:150])
+                behaviorBitfield = '\x00\x00\x00\x01'
+
+                try:
+                    privEncryptionKeyBase58 = shared.config.get(
+                        toaddress, 'privencryptionkey')
+                except Exception as err:
+                    shared.UISignalQueue.put(('updateSentItemStatusByAckdata',(ackdata,tr.translateText("MainWindow",'Problem: You are trying to send a message to yourself or a chan but your encryption key could not be found in the keys.dat file. Could not encrypt message. %1').arg(unicode(strftime(shared.config.get('bitmessagesettings', 'timeformat'),localtime(int(time.time()))),'utf-8')))))
+                    with shared.printLock:
+                        sys.stderr.write(
+                            'Error within sendMsg. Could not read the keys from the keys.dat file for our own address. %s\n' % err)
+                    continue
+                privEncryptionKeyHex = shared.decodeWalletImportFormat(
+                    privEncryptionKeyBase58).encode('hex')
+                pubEncryptionKeyBase256 = highlevelcrypto.privToPub(
+                    privEncryptionKeyHex).decode('hex')[1:]
                 requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
                 requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
                 shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
-                    ackdata, tr.translateText("MainWindow", "Doing work necessary to send message.\nThere is no required difficulty for version 2 addresses like this."))))
+                    ackdata, tr.translateText("MainWindow", "Doing work necessary to send message."))))
-            elif toAddressVersionNumber >= 3:
-                requiredAverageProofOfWorkNonceTrialsPerByte, varintLength = decodeVarint(
-                    pubkeyPayload[readPosition:readPosition + 10])
-                readPosition += varintLength
-                requiredPayloadLengthExtraBytes, varintLength = decodeVarint(
-                    pubkeyPayload[readPosition:readPosition + 10])
-                readPosition += varintLength
-                if requiredAverageProofOfWorkNonceTrialsPerByte < shared.networkDefaultProofOfWorkNonceTrialsPerByte:  # We still have to meet a minimum POW difficulty regardless of what they say is allowed in order to get our message to propagate through the network.
-                    requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
-                if requiredPayloadLengthExtraBytes < shared.networkDefaultPayloadLengthExtraBytes:
-                    requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
-                shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Doing work necessary to send message.\nReceiver\'s required difficulty: %1 and %2").arg(str(float(
-                    requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte)).arg(str(float(requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes)))))
-                if status != 'forcepow':
-                    if (requiredAverageProofOfWorkNonceTrialsPerByte > shared.config.getint('bitmessagesettings', 'maxacceptablenoncetrialsperbyte') and shared.config.getint('bitmessagesettings', 'maxacceptablenoncetrialsperbyte') != 0) or (requiredPayloadLengthExtraBytes > shared.config.getint('bitmessagesettings', 'maxacceptablepayloadlengthextrabytes') and shared.config.getint('bitmessagesettings', 'maxacceptablepayloadlengthextrabytes') != 0):
-                        # The demanded difficulty is more than we are willing
-                        # to do.
-                        sqlExecute(
-                            '''UPDATE sent SET status='toodifficult' WHERE ackdata=? ''',
-                            ackdata)
-                        shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Problem: The work demanded by the recipient (%1 and %2) is more difficult than you are willing to do.").arg(str(float(requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte)).arg(str(float(
-                            requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes)).arg(unicode(strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
-                        continue
-
 
             embeddedTime = pack('>Q', (int(time.time()) + random.randrange(
                 -300, 300)))  # the current time plus or minus five minutes. We will use this time both for our message and for the ackdata packed within our message.
@@ -748,13 +759,13 @@ class singleWorker(threading.Thread):
                     subject + '\n' + 'Body:' + message
                 payload += encodeVarint(len(messageToTransmit))
                 payload += messageToTransmit
-                if shared.safeConfigGetBoolean(toaddress, 'chan'):
+                if shared.config.has_section(toaddress):
                     with shared.printLock:
-                        print 'Not bothering to generate ackdata because we are sending to a chan.'
+                        print 'Not bothering to include ackdata because we are sending to ourselves or a chan.'
                     fullAckPayload = ''
                 elif not shared.isBitSetWithinBitfield(behaviorBitfield,31):
                     with shared.printLock:
-                        print 'Not bothering to generate ackdata because the receiver said that they won\'t relay it anyway.'
+                        print 'Not bothering to include ackdata because the receiver said that they won\'t relay it anyway.'
                     fullAckPayload = ''                    
                 else:
                     fullAckPayload = self.generateFullAckMessage(
@@ -795,26 +806,48 @@ class singleWorker(threading.Thread):
             shared.inventory[inventoryHash] = (
                 objectType, toStreamNumber, encryptedPayload, int(time.time()),'')
             shared.inventorySets[toStreamNumber].add(inventoryHash)
-            if shared.safeConfigGetBoolean(toaddress, 'chan'):
+            if shared.config.has_section(toaddress):
                 shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Message sent. Sent on %1").arg(unicode(
                     strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
             else:
-                # not sending to a chan
+                # not sending to a chan or one of my addresses
                 shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, tr.translateText("MainWindow", "Message sent. Waiting on acknowledgement. Sent on %1").arg(unicode(
                     strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
             print 'Broadcasting inv for my msg(within sendmsg function):', inventoryHash.encode('hex')
             shared.broadcastToSendDataQueues((
-                streamNumber, 'advertiseobject', inventoryHash))
+                toStreamNumber, 'advertiseobject', inventoryHash))
 
             # Update the status of the message in the 'sent' table to have a
             # 'msgsent' status or 'msgsentnoackexpected' status.
-            if shared.safeConfigGetBoolean(toaddress, 'chan'):
+            if not shared.config.has_section(toaddress):
                 newStatus = 'msgsentnoackexpected'
             else:
                 newStatus = 'msgsent'
             sqlExecute('''UPDATE sent SET msgid=?, status=? WHERE ackdata=?''',
                        inventoryHash,newStatus,ackdata)
 
+            # If we are sending to ourselves or a chan, let's put the message in
+            # our own inbox.
+            if shared.config.has_section(toaddress):
+                t = (inventoryHash, toaddress, fromaddress, subject, int(
+                    time.time()), message, 'inbox', 2, 0)
+                helper_inbox.insert(t)
+
+                shared.UISignalQueue.put(('displayNewInboxMessage', (
+                    inventoryHash, toaddress, fromaddress, subject, message)))
+
+                # If we are behaving as an API then we might need to run an
+                # outside command to let some program know that a new message
+                # has arrived.
+                if shared.safeConfigGetBoolean('bitmessagesettings', 'apienabled'):
+                    try:
+                        apiNotifyPath = shared.config.get(
+                            'bitmessagesettings', 'apinotifypath')
+                    except:
+                        apiNotifyPath = ''
+                    if apiNotifyPath != '':
+                        call([apiNotifyPath, "newMessage"])
+
     def requestPubKey(self, toAddress):
         toStatus, addressVersionNumber, streamNumber, ripe = decodeAddress(
             toAddress)

src/class_sqlThread.py

@@ -46,7 +46,7 @@ class sqlThread(threading.Thread):
             # because we may need more flexability in the future and it doesn't
             # take up much more space anyway.
             self.cur.execute(
-                '''CREATE TABLE pubkeys (hash blob, transmitdata blob, time int, usedpersonally text, UNIQUE(hash) ON CONFLICT REPLACE)''' )
+                '''CREATE TABLE pubkeys (hash blob, addressversion int, transmitdata blob, time int, usedpersonally text, UNIQUE(hash, addressversion) ON CONFLICT REPLACE)''' )
             self.cur.execute(
                 '''CREATE TABLE inventory (hash blob, objecttype text, streamnumber int, payload blob, receivedtime integer, tag blob, UNIQUE(hash) ON CONFLICT REPLACE)''' )
             self.cur.execute(
@@ -57,7 +57,7 @@ class sqlThread(threading.Thread):
                 '''INSERT INTO subscriptions VALUES('Bitmessage new releases/announcements','BM-GtovgYdgs7qXPkoYaRgrLFuFKz1SFpsw',1)''')
             self.cur.execute(
                 '''CREATE TABLE settings (key blob, value blob, UNIQUE(key) ON CONFLICT REPLACE)''' )
-            self.cur.execute( '''INSERT INTO settings VALUES('version','4')''')
+            self.cur.execute( '''INSERT INTO settings VALUES('version','5')''')
             self.cur.execute( '''INSERT INTO settings VALUES('lastvacuumtime',?)''', (
                 int(time.time()),))
             self.conn.commit()
@@ -253,13 +253,29 @@ class sqlThread(threading.Thread):
             with open(shared.appdata + 'keys.dat', 'wb') as configfile:
                 shared.config.write(configfile)
 
+        # Add a new column to the pubkeys table to store the address version.
+        # We're going to trash all of our pubkeys and let them be redownloaded.
+        item = '''SELECT value FROM settings WHERE key='version';'''
+        parameters = ''
+        self.cur.execute(item, parameters)
+        currentVersion = int(self.cur.fetchall()[0][0])
+        if currentVersion == 4:
+            self.cur.execute( '''DROP TABLE pubkeys''')
+            self.cur.execute(
+                '''CREATE TABLE pubkeys (hash blob, addressversion int, transmitdata blob, time int, usedpersonally text, UNIQUE(hash, addressversion) ON CONFLICT REPLACE)''' )
+            self.cur.execute(
+                '''delete from inventory where objecttype = 'pubkey';''')
+            item = '''update settings set value=? WHERE key='version';'''
+            parameters = (5,)
+            self.cur.execute(item, parameters)
+
         # Are you hoping to add a new option to the keys.dat file of existing
         # Bitmessage users? Add it right above this line!
         
         try:
             testpayload = '\x00\x00'
-            t = ('1234', testpayload, '12345678', 'no')
+            t = ('1234', 1, testpayload, '12345678', 'no')
-            self.cur.execute( '''INSERT INTO pubkeys VALUES(?,?,?,?)''', t)
+            self.cur.execute( '''INSERT INTO pubkeys VALUES(?,?,?,?,?)''', t)
             self.conn.commit()
             self.cur.execute(
                 '''SELECT transmitdata FROM pubkeys WHERE hash='1234' ''')

src/shared.py

@@ -1,4 +1,4 @@
-softwareVersion = '0.4.0'
+softwareVersion = '0.4.1'
 verbose = 1
 maximumAgeOfAnObjectThatIAmWillingToAccept = 216000  # Equals two days and 12 hours.
 lengthOfTimeToLeaveObjectsInInventory = 237600  # Equals two days and 18 hours. This should be longer than maximumAgeOfAnObjectThatIAmWillingToAccept so that we don't process messages twice.
@@ -469,8 +469,8 @@ def decryptAndCheckPubkeyPayload(payload, address):
             print 'Pubkey decryption was UNsuccessful due to RIPE mismatch. This shouldn\'t have happened.'
         return 'failed'
     
-    t = (ripe, signedData, int(time.time()), 'yes')
+    t = (ripe, addressVersion, signedData, int(time.time()), 'yes')
-    sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?)''', *t)
+    sqlExecute('''INSERT INTO pubkeys VALUES (?,?,?,?,?)''', *t)
     return 'successful'
 
 Peer = collections.namedtuple('Peer', ['host', 'port'])