8d829b587e
Reset OpenCL when settings change
...
- previously, changing the OpenCL vendor (or turning it on/off) required
a restart and this wasn't clear
2017-02-28 22:59:44 +01:00
171bc83ec0
HTML parser fix
...
- URLs followed with space were broken
2017-02-28 22:47:56 +01:00
b7e75b9bc5
setup.py fixes, guix and pyopencl
...
- detect GUIX
- FreeBSD uses "pkg install", not "pkg_install"
- add pyopencl dependency checking
2017-02-28 22:22:36 +01:00
eaafb9efa5
Listening port shouldn't be grey
2017-02-28 22:04:34 +01:00
PyBitmessage Translations
2906bff6b4
Auto-updated language de from transifex
2017-02-28 19:25:41 +01:00
PyBitmessage Translations
e33c6023b3
Auto-updated language sk from transifex
2017-02-28 19:21:29 +01:00
PyBitmessage Translations
a90f35fe6d
Auto-updated language pl from transifex
2017-02-28 19:13:31 +01:00
PyBitmessage Translations
97f803ccde
Auto-updated language eo from transifex
2017-02-28 19:12:14 +01:00
PyBitmessage Translations
e55407ff4b
Auto-updated language ja from transifex
2017-02-28 19:08:45 +01:00
34084bbc80
Total setup.py cleanup and simple script installation
2017-02-28 15:51:49 +02:00
e7506b2ac0
Fix tracking of already attempted connections
...
- it didn't delete the entries correctly, resulting in outgoing syn
sender deadlocking
2017-02-28 09:43:09 +01:00
f5b430b567
Excessive random seeding
...
- outgoing thread was calling a seed reinit before each peer selection.
This is not necessary, just init when the thread starts
2017-02-28 09:40:28 +01:00
42246f83ef
Reset connection list on UPnP
...
- reset the already attempted connection list after UPnP port mapping is
established. This allows to resubmit externally reachable port
2017-02-28 01:15:49 +01:00
59e1739136
Revert duplicate IP treatment for bootstrap
...
- bootstrap provider mode shouldn't accept multiple connections from a
single IP after all, it creates problems
2017-02-28 00:20:34 +01:00
d0b0d15dc3
Fix potential deadlock
...
- alreadyAttemptedConnectionsListLock probably deadlocked
- removed locking where unnecessary and rewrote the important part with
proper locking
2017-02-28 00:12:49 +01:00
af8957ed72
Typo in the second most recent commit
2017-02-27 23:37:15 +01:00
d9d2deee25
Typo in last commit
2017-02-27 23:35:48 +01:00
339e375958
Bootstrap provider mode and minor knownNodes changes
...
- if knownNodes grows to 20000, instead of ignoring new nodes, forget
the 1000 oldest ones
- drop connection after sendaddr if too many connections, even if it's
an outbound one
- if maximum total connections are lower than maximum outbound
connections, active bootstrap provider mode
- in this mode, check all addresses received before announcing them
- so basically it only annouces those addresses it successfully
connected to
2017-02-27 23:31:12 +01:00
5d068ec84a
Unnecessary locking
...
- there was a sleep inside a lock
2017-02-27 23:30:31 +01:00
741ac5ca05
UPnP recommendation notification fixes
...
- notify also if no connections and no change
2017-02-27 16:18:22 +01:00
ff786725ed
Typo
...
- UPnP / connectivity recommendation was active when on proxy rather
than without
2017-02-27 16:12:19 +01:00
e15d9e3e03
Save UPnP externa port after creating mapping
2017-02-27 15:55:59 +01:00
cd0972c0f3
Recommend enabling UPnP on network problems
...
- it looks like there aren't enough listening nodes
- if connection is dropped, notify non-proxy users about the UPnP option
2017-02-27 15:30:19 +01:00
124b321b8c
Less verbose error handling
...
- if socket sending results in EHOSTUNREACH or ETIMEDOUT, don't show
backtrace
2017-02-27 15:27:46 +01:00
8579d8b3b5
PyInstaller spec file updates
...
- file name based on architecture, version and date
- workaround for __init__ in src
- change to unix line endings
2017-02-27 13:02:37 +01:00
484d4abb3c
Frozen mode message type static
...
- I can't get the dynamic loading to work on OSX in frozen mode
- I think that if someone wants to build a frozen executable with custom
messagetypes modules, he can edit the file
- so now it lists the existing types manually (for frozen mode only)
2017-02-26 20:50:06 +01:00
511b89ebbe
PoW Worker should wait for sql thread to init
...
- I think this was causing freezing queue on launch if not empty
- I can't reproduce the bug anymore
2017-02-26 20:44:56 +01:00
d8301ff512
Less verbose connection error reporting
...
- don't print tracebacks on normal (timeout/reset) errors
2017-02-26 20:29:07 +01:00
cff1af1b4f
Subscription wrong tab
...
- when subscribing from addressbook, it switched to blacklist tab
instead of subscriptions
2017-02-26 20:03:47 +01:00
88658b074e
Socks proxy hostname resolving error handling
...
- if resolving fails, it wasn't handled
2017-02-26 20:03:14 +01:00
7ebe837eb0
Make some network parameters configurable
...
- maxtotalconnections = maximum number of total full connections
(incoming + outgoing) the node will allow. Default 200 as it was.
- maxbootstrapconnections = number of additional (to total) connection
that will act in bootstrap mode, closing after sending the list of
addresses. Default 20 as it was.
- maxaddrperstreamsend = initial address list maximum size, per
participating stream. Default 500. Child streams get half. The
response is chunked into pieces of max. 1000 addresses as that's the
protocol limit.
2017-02-26 17:46:02 +01:00
0fa0599cd4
IPv4 listen socket fix
...
- on OpenBSD, you can't have a socket that supports both IPv4 and IPv6.
This allows handling for this error, and then it will try IPv4 only,
just like for other similar errors.
2017-02-26 12:55:43 +01:00
191650f5a4
Typos
...
- previous commit contained typos
2017-02-26 12:52:28 +01:00
b1b0c46555
Improve exception handling
...
- there were reports of errors in FreeBSD (I could only reproduce some)
and Gentoo without IPv4 support (I don't have a VM for testing ready)
- adds an exception handler for double task_done in case sender thread
has to close prematurely (I saw this triggered on FreeBSD 11)
- listening socket opening error handler was broken (triggered if you
can't open a socket with both IPv4 and IPv6 support)
- error handler for socket.accept. Reported on FreeBSD 10.3
- fixes #854
2017-02-26 12:42:18 +01:00
74c85b4a9e
Retransmit timing changes
...
- makes it behave more like in the description
- partial for #847
2017-02-25 23:40:37 +01:00
7ef91bd607
Changed Makefile to use CXX instead of g++
...
- is more standardised
- closes #882
2017-02-25 22:33:31 +01:00
Justin Ramos
b50198afb5
changes needed to get current code to run
2017-02-25 00:06:04 -06:00
317d4d57cc
Add setup.py (setuptools)
...
- thanks to Lvl4Sword for the initial file
2017-02-24 16:49:53 +01:00
PyBitmessage Translations
93c881172e
Auto-updated language ja from transifex
2017-02-23 15:11:17 +01:00
PyBitmessage Translations
30952f91cf
Auto-updated language ru from transifex
2017-02-22 17:11:30 +01:00
a6dbb1e37e
Less timestamp penalty for inbound connections
...
- was over 2 days, but PyBM will only spread those with more recent than
3 hours. So it's now set to 2 hours
2017-02-22 16:18:08 +01:00
d7076626c2
TTL label is in red and warning when too low
...
- TTL to chans shouldn't be too low so the UI gives a feedback
- warning when sending wouldn either require a lot of refactoring or
wouldn't have good usability
2017-02-22 16:07:39 +01:00
e9899743ef
Typos, formatting, obsolete imports
2017-02-22 15:09:36 +01:00
PyBitmessage Translations
71ca2a761b
Auto-updated language pl from transifex
2017-02-22 12:53:17 +01:00
PyBitmessage Translations
fa1fc2a031
Auto-updated language eo from transifex
2017-02-22 12:36:09 +01:00
af1bed9034
MessageView Unicode HTML fix
...
- the HTML on/off click label should be unicode rather than str
2017-02-22 12:30:14 +01:00
57a3c35299
Context menu on messages to deleted accounts
...
- messages from deleted chans still stay in global inbox
- this crated problems with account detection
- created NoAccount class for such accounts
2017-02-22 12:15:52 +01:00
PyBitmessage Translations
72ed3e340f
Auto-updated language sk from transifex
2017-02-22 11:29:18 +01:00
PyBitmessage Translations
bda5b02118
Auto-updated language de from transifex
2017-02-22 11:27:17 +01:00
PyBitmessage Translations
56384a353a
Auto-updated language ja from transifex
2017-02-22 11:18:16 +01:00
