Commit Graph

3063 Commits

Author SHA1 Message Date
34084bbc80
Total setup.py cleanup and simple script installation 2017-02-28 15:51:49 +02:00
e7506b2ac0
Fix tracking of already attempted connections
- it didn't delete the entries correctly, resulting in outgoing syn
  sender deadlocking
2017-02-28 09:43:09 +01:00
f5b430b567
Excessive random seeding
- outgoing thread was calling a seed reinit before each peer selection.
  This is not necessary, just init when the thread starts
2017-02-28 09:40:28 +01:00
42246f83ef
Reset connection list on UPnP
- reset the already attempted connection list after UPnP port mapping is
  established. This allows to resubmit externally reachable port
2017-02-28 01:15:49 +01:00
59e1739136
Revert duplicate IP treatment for bootstrap
- bootstrap provider mode shouldn't accept multiple connections from a
  single IP after all, it creates problems
2017-02-28 00:20:34 +01:00
d0b0d15dc3
Fix potential deadlock
- alreadyAttemptedConnectionsListLock probably deadlocked
- removed locking where unnecessary and rewrote the important part with
  proper locking
2017-02-28 00:12:49 +01:00
af8957ed72
Typo in the second most recent commit 2017-02-27 23:37:15 +01:00
d9d2deee25
Typo in last commit 2017-02-27 23:35:48 +01:00
339e375958
Bootstrap provider mode and minor knownNodes changes
- if knownNodes grows to 20000, instead of ignoring new nodes, forget
  the 1000 oldest ones
- drop connection after sendaddr if too many connections, even if it's
  an outbound one
- if maximum total connections are lower than maximum outbound
  connections, active bootstrap provider mode
- in this mode, check all addresses received before announcing them
- so basically it only annouces those addresses it successfully
  connected to
2017-02-27 23:31:12 +01:00
5d068ec84a
Unnecessary locking
- there was a sleep inside a lock
2017-02-27 23:30:31 +01:00
741ac5ca05
UPnP recommendation notification fixes
- notify also if no connections and no change
2017-02-27 16:18:22 +01:00
ff786725ed
Typo
- UPnP / connectivity recommendation was active when on proxy rather
  than without
2017-02-27 16:12:19 +01:00
e15d9e3e03
Save UPnP externa port after creating mapping 2017-02-27 15:55:59 +01:00
cd0972c0f3
Recommend enabling UPnP on network problems
- it looks like there aren't enough listening nodes
- if connection is dropped, notify non-proxy users about the UPnP option
2017-02-27 15:30:19 +01:00
124b321b8c
Less verbose error handling
- if socket sending results in EHOSTUNREACH or ETIMEDOUT, don't show
  backtrace
2017-02-27 15:27:46 +01:00
8579d8b3b5
PyInstaller spec file updates
- file name based on architecture, version and date
- workaround for __init__ in src
- change to unix line endings
2017-02-27 13:02:37 +01:00
484d4abb3c
Frozen mode message type static
- I can't get the dynamic loading to work on OSX in frozen mode
- I think that if someone wants to build a frozen executable with custom
  messagetypes modules, he can edit the file
- so now it lists the existing types manually (for frozen mode only)
2017-02-26 20:50:06 +01:00
511b89ebbe
PoW Worker should wait for sql thread to init
- I think this was causing freezing queue on launch if not empty
- I can't reproduce the bug anymore
2017-02-26 20:44:56 +01:00
d8301ff512
Less verbose connection error reporting
- don't print tracebacks on normal (timeout/reset) errors
2017-02-26 20:29:07 +01:00
cff1af1b4f
Subscription wrong tab
- when subscribing from addressbook, it switched to blacklist tab
  instead of subscriptions
2017-02-26 20:03:47 +01:00
88658b074e
Socks proxy hostname resolving error handling
- if resolving fails, it wasn't handled
2017-02-26 20:03:14 +01:00
7ebe837eb0
Make some network parameters configurable
- maxtotalconnections = maximum number of total full connections
  (incoming + outgoing) the node will allow. Default 200 as it was.
- maxbootstrapconnections = number of additional (to total) connection
  that will act in bootstrap mode, closing after sending the list of
  addresses. Default 20 as it was.
- maxaddrperstreamsend = initial address list maximum size, per
  participating stream. Default 500. Child streams get half. The
  response is chunked into pieces of max. 1000 addresses as that's the
  protocol limit.
2017-02-26 17:46:02 +01:00
0fa0599cd4
IPv4 listen socket fix
- on OpenBSD, you can't have a socket that supports both IPv4 and IPv6.
  This allows handling for this error, and then it will try IPv4 only,
  just like for other similar errors.
2017-02-26 12:55:43 +01:00
191650f5a4
Typos
- previous commit contained typos
2017-02-26 12:52:28 +01:00
b1b0c46555
Improve exception handling
- there were reports of errors in FreeBSD (I could only reproduce some)
  and Gentoo without IPv4 support (I don't have a VM for testing ready)
- adds an exception handler for double task_done in case sender thread
  has to close prematurely (I saw this triggered on FreeBSD 11)
- listening socket opening error handler was broken (triggered if you
  can't open a socket with both IPv4 and IPv6 support)
- error handler for socket.accept. Reported on FreeBSD 10.3
- fixes #854
2017-02-26 12:42:18 +01:00
74c85b4a9e
Retransmit timing changes
- makes it behave more like in the description
- partial for #847
2017-02-25 23:40:37 +01:00
7ef91bd607
Changed Makefile to use CXX instead of g++
- is more standardised
- closes #882
2017-02-25 22:33:31 +01:00
Justin Ramos
b50198afb5
changes needed to get current code to run 2017-02-25 00:06:04 -06:00
317d4d57cc
Add setup.py (setuptools)
- thanks to Lvl4Sword for the initial file
2017-02-24 16:49:53 +01:00
PyBitmessage Translations
93c881172e
Auto-updated language ja from transifex 2017-02-23 15:11:17 +01:00
PyBitmessage Translations
30952f91cf
Auto-updated language ru from transifex 2017-02-22 17:11:30 +01:00
a6dbb1e37e
Less timestamp penalty for inbound connections
- was over 2 days, but PyBM will only spread those with more recent than
  3 hours. So it's now set to 2 hours
2017-02-22 16:18:08 +01:00
d7076626c2
TTL label is in red and warning when too low
- TTL to chans shouldn't be too low so the UI gives a feedback
- warning when sending wouldn either require a lot of refactoring or
  wouldn't have good usability
2017-02-22 16:07:39 +01:00
e9899743ef
Typos, formatting, obsolete imports 2017-02-22 15:09:36 +01:00
PyBitmessage Translations
71ca2a761b
Auto-updated language pl from transifex 2017-02-22 12:53:17 +01:00
PyBitmessage Translations
fa1fc2a031
Auto-updated language eo from transifex 2017-02-22 12:36:09 +01:00
af1bed9034
MessageView Unicode HTML fix
- the HTML on/off click label should be unicode rather than str
2017-02-22 12:30:14 +01:00
57a3c35299
Context menu on messages to deleted accounts
- messages from deleted chans still stay in global inbox
- this crated problems with account detection
- created NoAccount class for such accounts
2017-02-22 12:15:52 +01:00
PyBitmessage Translations
72ed3e340f
Auto-updated language sk from transifex 2017-02-22 11:29:18 +01:00
PyBitmessage Translations
bda5b02118
Auto-updated language de from transifex 2017-02-22 11:27:17 +01:00
PyBitmessage Translations
56384a353a
Auto-updated language ja from transifex 2017-02-22 11:18:16 +01:00
6062277d60
Rename configparser.py to bmconfigparser.py
- it was causing problems with py2app because the source of python's own
  CongigParser is also configparser.py
2017-02-22 09:34:54 +01:00
266d8eba1f
SafeHTMLParser unicode / subprocess
- don't do subprocess in SafeHTMLParser, it doesn't work in frozen mode
  and an attempt to fix it would take too much refactoring and I'm not
  even sure it would work
- instead, make it handle broken unicode correctly
- I think the previous reports of freezes were caused by trying to
  interpret data as unicode, causing a crash
- it does about 1MB/s on my machine, so a timeout is not a big problem
2017-02-22 09:05:05 +01:00
Justin Ramos
fd95f8f519
allowing for max outbound connection configuration
Signed-off-by: Justin Ramos <justin.ramos@gmail.com>
2017-02-21 16:28:54 -06:00
c8429365e3
Typo
- typo in last commit
2017-02-21 10:25:59 +01:00
fef6126a74
Error handling improvement in sendDataThread
- don't uncecessarily report EPIPE as a big error, just close the
  connection
2017-02-21 09:58:28 +01:00
ea9f10a8bb
Simplify and fix list of addresses to send
- it didn't always send the maximum possible amount
- it probably was slow
2017-02-20 22:32:49 +01:00
579ba49f38
Deamon mode without PyQt4
- daemon mode shouldn't require PyQt4
2017-02-20 20:53:50 +01:00
9c4366ffa6
Don't report direct network errors as proxy errors
- last commit reported network errors that happened when proxy was off
  as network errors
2017-02-20 12:34:55 +01:00
ea448c4496
SOCKS error handler winsock compatibility
- now it can detect WSA errors as well, allowing more accurate error
  feedback
2017-02-20 12:15:51 +01:00