PyBitmessage-2021-04-27/src/translations/bitmessage_ja.ts

2061 lines
108 KiB
XML
Raw Blame History

This file contains invisible Unicode characters

This file contains invisible Unicode characters that are indistinguishable to humans but may be processed differently by a computer. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

This file contains Unicode characters that might be confused with other characters. If you think that this is intentional, you can safely ignore this warning. Use the Escape button to reveal them.

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS><TS version="2.0" language="ja_JP" sourcelanguage="en">
<context>
<name>AddAddressDialog</name>
<message>
<location filename="../bitmessageqt/addaddressdialog.py" line="62"/>
<source>Add new entry</source>
<translation type="unfinished">新しい項目を追加</translation>
</message>
<message>
<location filename="../bitmessageqt/addaddressdialog.py" line="63"/>
<source>Label</source>
<translation type="unfinished">ラベル</translation>
</message>
<message>
<location filename="../bitmessageqt/addaddressdialog.py" line="64"/>
<source>Address</source>
<translation type="unfinished">アドレス</translation>
</message>
</context>
<context>
<name>EmailGatewayDialog</name>
<message>
<location filename="../bitmessageqt/emailgateway.py" line="67"/>
<source>Email gateway</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/emailgateway.py" line="68"/>
<source>Register on email gateway</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/emailgateway.py" line="69"/>
<source>Account status at email gateway</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/emailgateway.py" line="70"/>
<source>Change account settings at email gateway</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/emailgateway.py" line="71"/>
<source>Unregister from email gateway</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/emailgateway.py" line="72"/>
<source>Email gateway allows you to communicate with email users. Currently, only the Mailchuck email gateway (@mailchuck.com) is available.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/emailgateway.py" line="73"/>
<source>Desired email address (including @mailchuck.com):</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>EmailGatewayRegistrationDialog</name>
<message>
<location filename="../bitmessageqt/__init__.py" line="2244"/>
<source>Registration failed:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2244"/>
<source>The requested email address is not available, please try a new one. Fill out the new desired email address (including @mailchuck.com) below:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/emailgateway.py" line="102"/>
<source>Email gateway registration</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/emailgateway.py" line="103"/>
<source>Email gateway allows you to communicate with email users. Currently, only the Mailchuck email gateway (@mailchuck.com) is available.
Please type the desiged email address (including @mailchuck.com) below:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>Mailchuck</name>
<message>
<location filename="../bitmessageqt/account.py" line="220"/>
<source># You can use this to configure your email gateway account
# Uncomment the setting you want to use
# Here are the options:
#
# pgp: server
# The email gateway will create and maintain PGP keys for you and sign, verify,
# encrypt and decrypt on your behalf. When you want to use PGP but are lazy,
# use this. Requires subscription.
#
# pgp: local
# The email gateway will not conduct PGP operations on your behalf. You can
# either not use PGP at all, or use it locally.
#
# attachments: yes
# Incoming attachments in the email will be uploaded to MEGA.nz, and you can
# download them from there by following the link. Requires a subscription.
#
# attachments: no
# Attachments will be ignored.
#
# archive: yes
# Your incoming emails will be archived on the server. Use this if you need
# help with debugging problems or you need a third party proof of emails. This
# however means that the operator of the service will be able to read your
# emails even after they have been delivered to you.
#
# archive: no
# Incoming emails will be deleted from the server as soon as they are relayed
# to you.
#
# masterpubkey_btc: BIP44 xpub key or electrum v1 public seed
# offset_btc: integer (defaults to 0)
# feeamount: number with up to 8 decimal places
# feecurrency: BTC, XBT, USD, EUR or GBP
# Use these if you want to charge people who send you emails. If this is on and
# an unknown person sends you an email, they will be requested to pay the fee
# specified. As this scheme uses deterministic public keys, you will receive
# the money directly. To turn it off again, set &quot;feeamount&quot; to 0. Requires
# subscription.
</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>MainWindow</name>
<message>
<location filename="../bitmessageqt/__init__.py" line="564"/>
<source>One of your addresses, %1, is an old version 1 address. Version 1 addresses are no longer supported. May we delete it now?</source>
<translation>%1は古いバージョン1のアドレスです。バージョン1のアドレスはサポートが終了しています。すぐに削除しますか</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="163"/>
<source>Reply</source>
<translation type="obsolete">返信</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="167"/>
<source>Add sender to your Address Book</source>
<translation>送信元をアドレス帳に追加</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="349"/>
<source>Move to Trash</source>
<translation>ゴミ箱へ移動</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="181"/>
<source>View HTML code as formatted text</source>
<translation>HTMLコードを整形したテキストで表示</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="185"/>
<source>Save message as...</source>
<translation>形式を選択してメッセージを保存</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="189"/>
<source>Mark Unread</source>
<translation>未読にする</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="321"/>
<source>New</source>
<translation>新規</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="329"/>
<source>Enable</source>
<translation>有効</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="332"/>
<source>Disable</source>
<translation>無効</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="326"/>
<source>Copy address to clipboard</source>
<translation>アドレスをコピー</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="272"/>
<source>Special address behavior...</source>
<translation>アドレスの特別な動作</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="288"/>
<source>Send message to this address</source>
<translation>このアドレスへ送信</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="296"/>
<source>Subscribe to this address</source>
<translation>このアドレスを購読</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="304"/>
<source>Add New Address</source>
<translation>アドレスを追加</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="323"/>
<source>Delete</source>
<translation>削除</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="352"/>
<source>Copy destination address to clipboard</source>
<translation>宛先アドレスをコピー</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="356"/>
<source>Force send</source>
<translation>強制的に送信</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="830"/>
<source>Add new entry</source>
<translation type="obsolete">新しい項目を追加</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="737"/>
<source>Since startup on %1</source>
<translation type="obsolete">起動日時 %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="632"/>
<source>Waiting on their encryption key. Will request it again soon.</source>
<translation type="obsolete">暗号化キーを待っています。再度リクエストします。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="968"/>
<source>Encryption key request queued.</source>
<translation>暗号鍵のリクエストはキューに入りました。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="971"/>
<source>Queued.</source>
<translation>キューに入りました。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="641"/>
<source>Message sent. Waiting on acknowledgement. Sent at %1</source>
<translation type="obsolete">メッセージは送信されました。確認街です。送信先: %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="977"/>
<source>Message sent. Sent at %1</source>
<translation>メッセージは送信されました。送信先: %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="980"/>
<source>Need to do work to send message. Work is queued.</source>
<translation>送信のために処理を行う必要があります。処理はキューに入りました。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="983"/>
<source>Acknowledgement of the message received %1</source>
<translation>メッセージの確認を受け取りました %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2119"/>
<source>Broadcast queued.</source>
<translation>Broadcastがキューに入りました。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="989"/>
<source>Broadcast on %1</source>
<translation>Broadcast: %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="992"/>
<source>Problem: The work demanded by the recipient is more difficult than you are willing to do. %1</source>
<translation>問題: 受信者が要求している処理は現在あなたが設定しているよりも高い難易度です。 %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="995"/>
<source>Problem: The recipient&apos;s encryption key is no good. Could not encrypt message. %1</source>
<translation>問題: 受信者の暗号鍵は正当でない物です。メッセージを暗号化できません。 %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="998"/>
<source>Forced difficulty override. Send should start soon.</source>
<translation>難易度を強制上書きしました。まもなく送信されます。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1001"/>
<source>Unknown status: %1 %2</source>
<translation>不明なステータス: %1 %2</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1664"/>
<source>Not Connected</source>
<translation>未接続</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1124"/>
<source>Show Bitmessage</source>
<translation>Bitmessageを表示</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="691"/>
<source>Send</source>
<translation>送る</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1139"/>
<source>Subscribe</source>
<translation>購読</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="597"/>
<source>Address Book</source>
<translation type="obsolete">アドレス帳</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="734"/>
<source>Quit</source>
<translation>終了</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1495"/>
<source>You may manage your keys by editing the keys.dat file stored in the same directory as this program. It is important that you back up this file.</source>
<translation>プログラムを同じディレクトリに保存されているkeys.datファイルを編集することで鍵を管理できます。ファイルをバックアップしておくことも重要です。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1499"/>
<source>You may manage your keys by editing the keys.dat file stored in
%1
It is important that you back up this file.</source>
<translation>%1に保存されているkeys.datファイルを編集することで鍵を管理できます。ファイルをバックアップしておくことも重要です。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1506"/>
<source>Open keys.dat?</source>
<translation>keys.datを開きますか</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1503"/>
<source>You may manage your keys by editing the keys.dat file stored in the same directory as this program. It is important that you back up this file. Would you like to open the file now? (Be sure to close Bitmessage before making any changes.)</source>
<translation>プログラムを同じディレクトリに保存されているkeys.datファイルを編集することで鍵を管理できます。ファイルをバックアップしておくことも重要です。すぐにファイルを開きますか必ず編集する前にBitmessageを終了してください</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1506"/>
<source>You may manage your keys by editing the keys.dat file stored in
%1
It is important that you back up this file. Would you like to open the file now? (Be sure to close Bitmessage before making any changes.)</source>
<translation>%1に保存されているkeys.datファイルを編集することで鍵を管理できます。ファイルをバックアップしておくことも重要です。すぐにファイルを開きますか必ず編集する前にBitmessageを終了してください</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1513"/>
<source>Delete trash?</source>
<translation>ゴミ箱を空にしますか?</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1513"/>
<source>Are you sure you want to delete all trashed messages?</source>
<translation>ゴミ箱内のメッセージを全て削除してもよろしいですか?</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1533"/>
<source>bad passphrase</source>
<translation>不正なパスフレーズ</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1533"/>
<source>You must type your passphrase. If you don&apos;t have one then this is not the form for you.</source>
<translation>パスフレーズを入力してください。パスフレーズがない場合は入力する必要はありません。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1576"/>
<source>Chan name needed</source>
<translation>Chan名が必要です</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1576"/>
<source>You didn&apos;t enter a chan name.</source>
<translation>chan名が入力されていません。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1596"/>
<source>Address already present</source>
<translation>アドレスは既に表示されています</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1596"/>
<source>Could not add chan because it appears to already be one of your identities.</source>
<translation>chanを追加できません。既にアドレス一覧に含まれています。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1600"/>
<source>Success</source>
<translation>成功</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1571"/>
<source>Successfully created chan. To let others join your chan, give them the chan name and this Bitmessage address: %1. This address also appears in &apos;Your Identities&apos;.</source>
<translation>chanの作成に成功しました。他の人がchanに参加できるようにするには、chanの名前とBitmessageアドレスを伝えてください: %1 アドレスは「アドレス一覧」に表示されます。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1580"/>
<source>Address too new</source>
<translation>アドレスが新しすぎます</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1580"/>
<source>Although that Bitmessage address might be valid, its version number is too new for us to handle. Perhaps you need to upgrade Bitmessage.</source>
<translation>このBitmessageアドレスは正当ですが、バージョン番号が現在使用中の物より新しいです。Bitmessageをアップデートしてください。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1584"/>
<source>Address invalid</source>
<translation>アドレスが不正です</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1584"/>
<source>That Bitmessage address is not valid.</source>
<translation>このBitmessageアドレスは不正です。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1592"/>
<source>Address does not match chan name</source>
<translation>アドレスがchan名と一致しません</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1592"/>
<source>Although the Bitmessage address you entered was valid, it doesn&apos;t match the chan name.</source>
<translation>このBitmessageアドレスは正当ですが、chan名と一致していません。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1600"/>
<source>Successfully joined chan. </source>
<translation>chanに参加しました。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1714"/>
<source>Processed %1 person-to-person messages.</source>
<translation type="obsolete">%1 通の1対1のメッセージを処理しました。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1719"/>
<source>Processed %1 broadcast messages.</source>
<translation type="obsolete">%1 件のBroadcastメッセージを処理しました。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1724"/>
<source>Processed %1 public keys.</source>
<translation type="obsolete">%1 件の公開鍵を処理しました。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1792"/>
<source>Total Connections: %1</source>
<translation type="obsolete">接続数: %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1658"/>
<source>Connection lost</source>
<translation>接続が切断されました</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1697"/>
<source>Connected</source>
<translation>接続済み</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1814"/>
<source>Message trashed</source>
<translation>メッセージが削除されました</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1988"/>
<source>Error: Bitmessage addresses start with BM- Please check %1</source>
<translation>エラー: Bitmessageアドレスは「BM-」で始まります。確認してください %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1991"/>
<source>Error: The address %1 is not typed or copied correctly. Please check it.</source>
<translation>エラー: アドレス %1 は正しく入力、またはコピーされていません。確認して下さい。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1994"/>
<source>Error: The address %1 contains invalid characters. Please check it.</source>
<translation>エラー: アドレス %1 は不正な文字を含んでいます。確認して下さい。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1997"/>
<source>Error: The address version in %1 is too high. Either you need to upgrade your Bitmessage software or your acquaintance is being clever.</source>
<translation>エラー: アドレスのバージョン %1 は現在使用中の物より新しいです。Bitmessageをアップデートする必要があるか、連絡先がより賢いです。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2000"/>
<source>Error: Some data encoded in the address %1 is too short. There might be something wrong with the software of your acquaintance.</source>
<translation>エラー: アドレス %1 でエンコードされたデータが短すぎます。連絡先のソフトウェアが何かしら誤っている可能性があります。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2003"/>
<source>Error: Some data encoded in the address %1 is too long. There might be something wrong with the software of your acquaintance.</source>
<translation>エラー: アドレス %1 でエンコードされたデータが長すぎます。連絡先のソフトウェアが何かしら誤っている可能性があります。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2009"/>
<source>Error: Something is wrong with the address %1.</source>
<translation>エラー: アドレス %1 には何かしら誤りがあります。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2077"/>
<source>Error: You must specify a From address. If you don&apos;t have one, go to the &apos;Your Identities&apos; tab.</source>
<translation>エラー: 送信元アドレスを指定してください。まだ作成していない場合には「アドレス一覧」のタブを開いてください。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1588"/>
<source>Sending to your address</source>
<translation type="obsolete">アドレスへ送信中</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1588"/>
<source>Error: One of the addresses to which you are sending a message, %1, is yours. Unfortunately the Bitmessage client cannot process its own messages. Please try running a second client on a different computer or within a VM.</source>
<translation type="obsolete">エラー: 送信先アドレス %1 は自分自身のアドレスです。Bitmessageクライアントは自分自身へのメッセージを処理できません。別のPCか仮想マシン上でクライアントを立ち上げてください。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2018"/>
<source>Address version number</source>
<translation>アドレスのバージョン番号</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2018"/>
<source>Concerning the address %1, Bitmessage cannot understand address version numbers of %2. Perhaps upgrade Bitmessage to the latest version.</source>
<translation>アドレス %1 に接続。%2 のバージョン番号は処理できません。Bitmessageを最新のバージョンへアップデートしてください。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2022"/>
<source>Stream number</source>
<translation>ストリーム番号</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2022"/>
<source>Concerning the address %1, Bitmessage cannot handle stream numbers of %2. Perhaps upgrade Bitmessage to the latest version.</source>
<translation>アドレス %1 に接続。%2 のストリーム番号は処理できません。Bitmessageを最新のバージョンへアップデートしてください。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2027"/>
<source>Warning: You are currently not connected. Bitmessage will do the work necessary to send the message but it won&apos;t send until you connect.</source>
<translation>警告: 接続されていません。Bitmessageはメッセージの処理を行いますが、ネットワークに接続するまで送信はされません。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2073"/>
<source>Your &apos;To&apos; field is empty.</source>
<translation>宛先が指定されていません。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1695"/>
<source>Work is queued.</source>
<translation type="obsolete">処理がキューに入りました。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2128"/>
<source>Right click one or more entries in your address book and select &apos;Send message to this address&apos;.</source>
<translation>アドレス帳から一つ、または複数のアドレスを右クリックして「このアドレスへ送信」を選んでください。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2139"/>
<source>Fetched address from namecoin identity.</source>
<translation>namecoin IDからアドレスを取得。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1805"/>
<source>Work is queued. %1</source>
<translation type="obsolete">処理がキューに入りました。 %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2238"/>
<source>New Message</source>
<translation>新規メッセージ</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2238"/>
<source>From </source>
<translation>送信元</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4197"/>
<source>Address is valid.</source>
<translation>アドレスが不正です。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2299"/>
<source>The address you entered was invalid. Ignoring it.</source>
<translation>入力されたアドレスは不正です。無視されました。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2902"/>
<source>Error: You cannot add the same address to your address book twice. Try renaming the existing one if you want.</source>
<translation>エラー: 同じアドレスを複数アドレス帳に追加する事はできません。既存の項目をリネームしてください。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2610"/>
<source>Error: You cannot add the same address to your subsciptions twice. Perhaps rename the existing one if you want.</source>
<translation type="obsolete">エラー: 同じアドレスを複数購読リストに追加する事はできません。既存の項目をリネームしてください。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2377"/>
<source>Restart</source>
<translation>再開</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2363"/>
<source>You must restart Bitmessage for the port number change to take effect.</source>
<translation>ポート番号の変更を有効にするにはBitmessageを再起動してください。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2377"/>
<source>Bitmessage will use your proxy from now on but you may want to manually restart Bitmessage now to close existing connections (if any).</source>
<translation>プロキシの設定を有効にするには手動でBitmessageを再起動してください。既に接続がある場合は切断されます。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2789"/>
<source>Error: You cannot add the same address to your list twice. Perhaps rename the existing one if you want.</source>
<translation type="obsolete">エラー: 同じアドレスを複数リストに追加する事はできません。既存の項目をリネームしてください。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2650"/>
<source>Passphrase mismatch</source>
<translation>パスフレーズが一致しません</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2650"/>
<source>The passphrase you entered twice doesn&apos;t match. Try again.</source>
<translation>再度入力されたパスフレーズが一致しません。再入力してください。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2653"/>
<source>Choose a passphrase</source>
<translation>パスフレーズを選択してください</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2653"/>
<source>You really do need a passphrase.</source>
<translation>パスフレーズが必要です。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2689"/>
<source>All done. Closing user interface...</source>
<translation>完了しました。ユーザーインターフェースを閉じています。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2849"/>
<source>Address is gone</source>
<translation>アドレスが無効になりました</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2849"/>
<source>Bitmessage cannot find your address %1. Perhaps you removed it?</source>
<translation>アドレス %1 が見つかりません。既に削除していませんか?</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2852"/>
<source>Address disabled</source>
<translation>アドレスが無効になりました</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2852"/>
<source>Error: The address from which you are trying to send is disabled. You&apos;ll have to enable it on the &apos;Your Identities&apos; tab before using it.</source>
<translation>エラー: 送信しようとしたアドレスは無効になっています。使用する前に「アドレス一覧」で有効にしてください。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2899"/>
<source>Entry added to the Address Book. Edit the label to your liking.</source>
<translation>アドレス帳に項目が追加されました。ラベルは自由に編集できます。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3055"/>
<source>Moved items to trash.</source>
<translation>アイテムをゴミ箱へ移動。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3023"/>
<source>Save As...</source>
<translation>形式を選択して保存</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3032"/>
<source>Write error.</source>
<translation>書き込みエラー。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3133"/>
<source>No addresses selected.</source>
<translation>アドレスが未選択です。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3063"/>
<source>Options have been disabled because they either aren&apos;t applicable or because they haven&apos;t yet been implemented for your operating system.</source>
<translation type="obsolete">現在のOS上で未実装、または実装できないためオプションは無効化されました。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4076"/>
<source>Testing...</source>
<translation>テスト中</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4116"/>
<source>This is a chan address. You cannot use it as a pseudo-mailing list.</source>
<translation>chanアドレスは仮想メーリングリストのアドレスには使用できません。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4176"/>
<source>The address should start with &apos;&apos;BM-&apos;&apos;</source>
<translation>アドレスは「BM-」から始まります</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4179"/>
<source>The address is not typed or copied correctly (the checksum failed).</source>
<translation>このアドレスは正しく入力、またはコピーされていません。(チェックサムが一致しません)。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4182"/>
<source>The version number of this address is higher than this software can support. Please upgrade Bitmessage.</source>
<translation>このアドレスのバージョン番号はこのプログラムのサポート範囲外です。Bitmessageをアップデートしてください。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4185"/>
<source>The address contains invalid characters.</source>
<translation>入力されたアドレスは不正な文字を含んでいます。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4188"/>
<source>Some data encoded in the address is too short.</source>
<translation>このアドレスでエンコードされたデータが短すぎます。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4191"/>
<source>Some data encoded in the address is too long.</source>
<translation>このアドレスでエンコードされたデータが長過ぎます。</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4257"/>
<source>You are using TCP port %1. (This can be changed in the settings).</source>
<translation>使用中のポート %1 (設定で変更できます)。</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="645"/>
<source>Bitmessage</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="712"/>
<source>Search</source>
<translation>検索</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="713"/>
<source>All</source>
<translation>全て</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="720"/>
<source>To</source>
<translation>宛先</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="722"/>
<source>From</source>
<translation>送信元</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="724"/>
<source>Subject</source>
<translation>題名</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="717"/>
<source>Message</source>
<translation>メッセージ</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="726"/>
<source>Received</source>
<translation>受信日時</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="540"/>
<source>Inbox</source>
<translation type="obsolete">受信箱</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="541"/>
<source>Load from Address book</source>
<translation type="obsolete">アドレス帳から読み込み</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="670"/>
<source>Fetch Namecoin ID</source>
<translation>namecoin IDを取得</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="543"/>
<source>Message:</source>
<translation type="obsolete">メッセージ:</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="681"/>
<source>Subject:</source>
<translation>題名:</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="545"/>
<source>Send to one or more specific people</source>
<translation type="obsolete">一人、または複数のユーザーへ送信</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="673"/>
<source>To:</source>
<translation>宛先:</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="680"/>
<source>From:</source>
<translation>送信元:</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="553"/>
<source>Broadcast to everyone who is subscribed to your address</source>
<translation type="obsolete">自分のアドレスを購読しているユーザー全員へ配信する</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="555"/>
<source>Be aware that broadcasts are only encrypted with your address. Anyone who knows your address can read them.</source>
<translation type="obsolete">broadcastはあなたのアドレスのみで暗号化されます。あなたのアドレスを知っている人は全て読むことができます。</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="571"/>
<source>Status</source>
<translation type="obsolete">状態</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="572"/>
<source>Sent</source>
<translation type="obsolete">送信済み</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="576"/>
<source>Label (not shown to anyone)</source>
<translation type="obsolete">ラベル(他の人からは見えません)</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="668"/>
<source>Address</source>
<translation>アドレス</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="580"/>
<source>Stream</source>
<translation type="obsolete">ストリーム</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="581"/>
<source>Your Identities</source>
<translation type="obsolete">アドレス一覧</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="582"/>
<source>Here you can subscribe to &apos;broadcast messages&apos; that are sent by other users. Messages will appear in your Inbox. Addresses here override those on the Blacklist tab.</source>
<translation type="obsolete">他のユーザが送信した「broadcastメッセージ」を購読できます。メッセージは受信箱に表示されます。このリストのアドレスはブラックリストより優先されます。</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="693"/>
<source>Add new Subscription</source>
<translation>購読先を追加</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="586"/>
<source>Label</source>
<translation type="obsolete">ラベル</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="709"/>
<source>Subscriptions</source>
<translation>購読リスト</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="590"/>
<source>The Address book is useful for adding names or labels to other people&apos;s Bitmessage addresses so that you can recognize them more easily in your inbox. You can add entries here using the &apos;Add&apos; button, or from your inbox by right-clicking on a message.</source>
<translation type="obsolete">アドレス帳は他のユーザのBitmessageアドレスにラベルや名前をつけることで受信箱を見やすくします。「追加」ボタンを押すか受信箱でメッセージを右クリックしてください。</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="833"/>
<source>Name or Label</source>
<translation type="obsolete">名前、ラベル</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="828"/>
<source>Use a Blacklist (Allow all incoming messages except those on the Blacklist)</source>
<translation type="obsolete">ブラックリストを使用(全てのメッセージを受信してブラックリストと一致する物だけ除外)</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="829"/>
<source>Use a Whitelist (Block all incoming messages except those on the Whitelist)</source>
<translation type="obsolete">ホワイトリストを使用(全てのメッセージを受信拒否してホワイトリストと一致する物だけ許可)</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="836"/>
<source>Blacklist</source>
<translation type="obsolete">ブラックリスト</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="838"/>
<source>Stream #</source>
<translation type="obsolete">ストリーム #</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="840"/>
<source>Connections</source>
<translation type="obsolete">接続</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="611"/>
<source>Total connections: 0</source>
<translation type="obsolete">接続数: 0</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="612"/>
<source>Since startup at asdf:</source>
<translation type="obsolete">起動してから asdf:</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="613"/>
<source>Processed 0 person-to-person message.</source>
<translation type="obsolete">0 通の1対1のメッセージを処理しました。</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="614"/>
<source>Processed 0 public key.</source>
<translation type="obsolete">0 件の公開鍵を処理しました。</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="615"/>
<source>Processed 0 broadcast.</source>
<translation type="obsolete">0 件のBroadcastメッセージを処理しました。</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="728"/>
<source>Network Status</source>
<translation>ネットワークの状態</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="729"/>
<source>File</source>
<translation>ファイル</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="740"/>
<source>Settings</source>
<translation>設定</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="736"/>
<source>Help</source>
<translation>ヘルプ</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="732"/>
<source>Import keys</source>
<translation>鍵をインポート</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="733"/>
<source>Manage keys</source>
<translation>鍵を管理</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="735"/>
<source>Ctrl+Q</source>
<translation>Ctrrl+Q</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="737"/>
<source>F1</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="739"/>
<source>About</source>
<translation>概要</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="741"/>
<source>Regenerate deterministic addresses</source>
<translation>deterministiアドレスを再生成</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="742"/>
<source>Delete all trashed messages</source>
<translation>ゴミ箱のメッセージを全て削除する</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="743"/>
<source>Join / Create chan</source>
<translation>chanに参加 / 作成</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="163"/>
<source>Reply to sender</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="165"/>
<source>Reply to channel</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="171"/>
<source>Add sender to your Blacklist</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="178"/>
<source>Undelete</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3515"/>
<source>Set avatar...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="237"/>
<source>Email gateway</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="784"/>
<source>1 hour</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="786"/>
<source>%1 hours</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="789"/>
<source>%1 days</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="965"/>
<source>Waiting for their encryption key. Will request it again soon.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="974"/>
<source>Message sent. Waiting for acknowledgement. Sent at %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1145"/>
<source>Channel</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1546"/>
<source>Bad address version number</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1542"/>
<source>Your address version number must be a number: either 3 or 4.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1546"/>
<source>Your address version number must be either 3 or 4.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1915"/>
<source>The TTL, or Time-To-Live is the length of time that the network will hold the message.
The recipient must get it during this time. If your Bitmessage client does not hear an acknowledgement, it
will resend the message automatically. The longer the Time-To-Live, the
more work your computer must do to send the message. A Time-To-Live of four or five days is often appropriate.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1951"/>
<source>Message too long</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1951"/>
<source>The message that you are trying to send is too long by %1 bytes. (The maximum is 261644 bytes). Please cut it down before sending.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1979"/>
<source>Error: Your account wasn&apos;t registered at an email gateway. Sending registration now as %1, please wait for the registration to be processed before retrying sending.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2006"/>
<source>Error: Some data encoded in the address %1 is malformed. There might be something wrong with the software of your acquaintance.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2069"/>
<source>Message queued.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2617"/>
<source>Sending email gateway registration request</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3147"/>
<source>Error: You cannot add the same address to your subscriptions twice. Perhaps rename the existing one if you want.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2405"/>
<source>Number needed</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2405"/>
<source>Your maximum download and upload rate must be numbers. Ignoring what you typed.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2478"/>
<source>Will not resend ever</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2478"/>
<source>Note that the time limit you entered is less than the amount of time Bitmessage waits for the first resend attempt therefore your messages will never be resent.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2590"/>
<source>Sending email gateway unregistration request</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2594"/>
<source>Sending email gateway status request</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2924"/>
<source>Entry added to the blacklist. Edit the label to your liking.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2927"/>
<source>Error: You cannot add the same address to your blacklist twice. Try renaming the existing one if you want.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2995"/>
<source>Undeleted item.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3179"/>
<source>If you delete the subscription, messages that you already received will become inaccessible. Maybe you can consider disabling the subscription instead. Disabled subscriptions will not receive new messages, but you can still view messages you already received.
Are you sure you want to delete the subscription?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3408"/>
<source>If you delete the channel, messages that you already received will become inaccessible. Maybe you can consider disabling the channel instead. Disabled channels will not receive new messages, but you can still view messages you already received.
Are you sure you want to delete the channel?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3522"/>
<source>Do you really want to remove this avatar?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3530"/>
<source>You have already set an avatar for this address. Do you really want to overwrite it?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3911"/>
<source>Start-on-login not yet supported on your OS.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3904"/>
<source>Minimize-to-tray not yet supported on your OS.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3907"/>
<source>Tray notifications not yet supported on your OS.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4194"/>
<source>Some data encoded in the address is malformed.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4168"/>
<source>Enter an address above.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4200"/>
<source>Address is an old type. We cannot display its past broadcasts.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4209"/>
<source>There are no recent broadcasts from this address to display.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4213"/>
<source>Display the %1 recent broadcast from this address.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4217"/>
<source>Display the %1 recent broadcasts from this address.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="646"/>
<source>Identities</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="647"/>
<source>New Identity</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="663"/>
<source>Messages</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="666"/>
<source>Address book</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="669"/>
<source>Add Contact</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="682"/>
<source>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Droid Sans&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot;-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:&apos;MS Shell Dlg 2&apos;;&quot;&gt;&lt;br /&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="679"/>
<source>Send ordinary Message</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="687"/>
<source>Send Message to your Subscribers</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="688"/>
<source>TTL:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="689"/>
<source>X days</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="727"/>
<source>Chans</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="711"/>
<source>Add Chan</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="738"/>
<source>Contact support</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/foldertree.py" line="171"/>
<source>All accounts</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/messageview.py" line="44"/>
<source>Zoom level %1%</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>NewAddressDialog</name>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="173"/>
<source>Create new Address</source>
<translation>新しいアドレスを作成</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="174"/>
<source>Here you may generate as many addresses as you like. Indeed, creating and abandoning addresses is encouraged. You may generate addresses by using either random numbers or by using a passphrase. If you use a passphrase, the address is called a &quot;deterministic&quot; address.
The &apos;Random Number&apos; option is selected by default but deterministic addresses have several pros and cons:</source>
<translation>複数のアドレスを生成できます。アドレスを自由に生成、破棄することができます。アドレスは乱数かパスフレーズを使って生成できます。もしパスフレーズを使う場合、アドレスはdeterministicアドレスになります。デフォルトでは乱数による生成が選択されますが、deterministicアドレスにも長所と短所があります:</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="176"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-weight:600;&quot;&gt;Pros:&lt;br/&gt;&lt;/span&gt;You can recreate your addresses on any computer from memory. &lt;br/&gt;You need-not worry about backing up your keys.dat file as long as you can remember your passphrase. &lt;br/&gt;&lt;span style=&quot; font-weight:600;&quot;&gt;Cons:&lt;br/&gt;&lt;/span&gt;You must remember (or write down) your passphrase if you expect to be able to recreate your keys if they are lost. &lt;br/&gt;You must remember the address version number and the stream number along with your passphrase. &lt;br/&gt;If you choose a weak passphrase and someone on the Internet can brute-force it, they can read your messages and send messages as you.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-weight:600;&quot;&gt;長所:&lt;br/&gt;&lt;/span&gt;記憶を頼りにアドレスを再生成できます。&lt;br/&gt;keys.datファイルのバックアップの心配をしないでも、パスフレーズを覚えておけばよくなります。&lt;br/&gt;&lt;span style=&quot; font-weight:600;&quot;&gt;短所:&lt;br/&gt;&lt;/span&gt;アドレスの暗号鍵を紛失した場合に備えてアドレスを再生成出来るようにしたい場合、パスフレーズを覚えて(もしくは書き留めて)必要があります。&lt;br/&gt;パスフレーズを覚えておくのに加えて、アドレスのバージョン番号とストリーム番号も覚えておく必要があります。&lt;br/&gt;弱いパスフレーズを設定すると、ネット上の誰かがブルートフォース攻撃を行ってあなたの送信メッセージ、受信メッセージを読んでしまう可能性があります。&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="177"/>
<source>Use a random number generator to make an address</source>
<translation>アドレスの生成に乱数ジェネレーターを使う</translation>
</message>
<message>
<location filename="newaddressdialog.py" line="169"/>
<source>Use a passpharase to make addresses</source>
<translation type="obsolete">Use yee passpharase to make arrddresses</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="179"/>
<source>Spend several minutes of extra computing time to make the address(es) 1 or 2 characters shorter</source>
<translation>アドレスを1、2文字短くするために数分間追加の計算処理を行う</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="180"/>
<source>Make deterministic addresses</source>
<translation>deterministiアドレスを作る</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="181"/>
<source>Address version number: 3</source>
<translation type="obsolete">アドレスのバージョン番号: 3</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="182"/>
<source>In addition to your passphrase, you must remember these numbers:</source>
<translation>パスフレーズに加えて、これらの値を覚えておいてください:</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="183"/>
<source>Passphrase</source>
<translation>パスフレーズ</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="184"/>
<source>Number of addresses to make based on your passphrase:</source>
<translation>パスフレーズから生成されたアドレスの数:</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="185"/>
<source>Stream number: 1</source>
<translation>ストリーム数: 1</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="186"/>
<source>Retype passphrase</source>
<translation>パスフレーズを再入力</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="187"/>
<source>Randomly generate address</source>
<translation>ランダムなアドレスを生成する</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="188"/>
<source>Label (not shown to anyone except you)</source>
<translation>ラベル(他の人からは見えません)</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="189"/>
<source>Use the most available stream</source>
<translation>最も有効なストリームを使う</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="190"/>
<source> (best if this is the first of many addresses you will create)</source>
<translation>(もしこれから複数のアドレスを生成するのであれば、最初の一つに最適です。)</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="191"/>
<source>Use the same stream as an existing address</source>
<translation>既存のアドレスと同じストリームを利用する</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="192"/>
<source>(saves you some bandwidth and processing power)</source>
<translation>(帯域と処理能力を節約する)</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="178"/>
<source>Use a passphrase to make addresses</source>
<translation>アドレスの作成にパスフレーズを使う</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="181"/>
<source>Address version number: 4</source>
<translation type="unfinished">アドレスのバージョン番号: 4</translation>
</message>
</context>
<context>
<name>NewSubscriptionDialog</name>
<message>
<location filename="../bitmessageqt/newsubscriptiondialog.py" line="65"/>
<source>Add new entry</source>
<translation>新しい項目を追加</translation>
</message>
<message>
<location filename="../bitmessageqt/newsubscriptiondialog.py" line="66"/>
<source>Label</source>
<translation>ラベル</translation>
</message>
<message>
<location filename="../bitmessageqt/newsubscriptiondialog.py" line="67"/>
<source>Address</source>
<translation>アドレス</translation>
</message>
<message>
<location filename="../bitmessageqt/newsubscriptiondialog.py" line="68"/>
<source>CheckBox</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>SpecialAddressBehaviorDialog</name>
<message>
<location filename="../bitmessageqt/specialaddressbehavior.py" line="59"/>
<source>Special Address Behavior</source>
<translation>アドレスの特別な動作</translation>
</message>
<message>
<location filename="../bitmessageqt/specialaddressbehavior.py" line="60"/>
<source>Behave as a normal address</source>
<translation>通常のアドレスにする</translation>
</message>
<message>
<location filename="../bitmessageqt/specialaddressbehavior.py" line="61"/>
<source>Behave as a pseudo-mailing-list address</source>
<translation>仮想メーリングリストとして使用する</translation>
</message>
<message>
<location filename="../bitmessageqt/specialaddressbehavior.py" line="62"/>
<source>Mail received to a pseudo-mailing-list address will be automatically broadcast to subscribers (and thus will be public).</source>
<translation>仮想メーリングリストのアドレスが受信したアドレスは自動的に購読するユーザーに配信(公開)されます。</translation>
</message>
<message>
<location filename="../bitmessageqt/specialaddressbehavior.py" line="63"/>
<source>Name of the pseudo-mailing-list:</source>
<translation>仮想メーリングリストの名前:</translation>
</message>
</context>
<context>
<name>aboutDialog</name>
<message>
<location filename="../bitmessageqt/about.py" line="67"/>
<source>PyBitmessage</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/about.py" line="68"/>
<source>version ?</source>
<translation>Version ?</translation>
</message>
<message>
<location filename="../bitmessageqt/about.py" line="66"/>
<source>About</source>
<translation>概要</translation>
</message>
<message>
<location filename="../bitmessageqt/about.py" line="70"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Distributed under the MIT/X11 software license; see &lt;a href=&quot;http://www.opensource.org/licenses/mit-license.php&quot;&gt;&lt;span style=&quot; text-decoration: underline; color:#0000ff;&quot;&gt;http://www.opensource.org/licenses/mit-license.php&lt;/span&gt;&lt;/a&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/about.py" line="71"/>
<source>This is Beta software.</source>
<translation>このソフトウェアはベータ版です。</translation>
</message>
<message>
<location filename="../bitmessageqt/about.py" line="69"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Copyright &#xc2;&#xa9; 2012-2014 Jonathan Warren&lt;br/&gt;Copyright &#xc2;&#xa9; 2013-2014 The Bitmessage Developers&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>connectDialog</name>
<message>
<location filename="../bitmessageqt/connect.py" line="56"/>
<source>Bitmessage</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/connect.py" line="57"/>
<source>Bitmessage won&apos;t connect to anyone until you let it. </source>
<translation>Bitmessageはあなたが操作しない限りどこへも接続しません。</translation>
</message>
<message>
<location filename="../bitmessageqt/connect.py" line="58"/>
<source>Connect now</source>
<translation>接続</translation>
</message>
<message>
<location filename="../bitmessageqt/connect.py" line="59"/>
<source>Let me configure special network settings first</source>
<translation>最初に特別なネットワークの設定を行ってください</translation>
</message>
</context>
<context>
<name>helpDialog</name>
<message>
<location filename="../bitmessageqt/help.py" line="45"/>
<source>Help</source>
<translation>ヘルプ</translation>
</message>
<message>
<location filename="../bitmessageqt/help.py" line="46"/>
<source>&lt;a href=&quot;http://Bitmessage.org/wiki/PyBitmessage_Help&quot;&gt;http://Bitmessage.org/wiki/PyBitmessage_Help&lt;/a&gt;</source>
<translation type="obsolete">&lt;a href=&quot;http://Bitmessage.org/wiki/PyBitmessage_Help&quot;&gt;http://Bitmessage.org/wiki/PyBitmessage_Help&lt;/a&gt;</translation>
</message>
<message>
<location filename="../bitmessageqt/help.py" line="47"/>
<source>As Bitmessage is a collaborative project, help can be found online in the Bitmessage Wiki:</source>
<translation>Bitmessageは協働プロジェクトです。ヘルプはBitmessage Wikiを参照してください:</translation>
</message>
<message>
<location filename="../bitmessageqt/help.py" line="46"/>
<source>&lt;a href=&quot;https://bitmessage.org/wiki/PyBitmessage_Help&quot;&gt;https://bitmessage.org/wiki/PyBitmessage_Help&lt;/a&gt;</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>iconGlossaryDialog</name>
<message>
<location filename="../bitmessageqt/iconglossary.py" line="82"/>
<source>Icon Glossary</source>
<translation>アイコン一覧</translation>
</message>
<message>
<location filename="../bitmessageqt/iconglossary.py" line="83"/>
<source>You have no connections with other peers. </source>
<translation>他のpeerへ接続されていません。</translation>
</message>
<message>
<location filename="iconglossary.py" line="75"/>
<source>You have made at least one connection to a peer using an outgoing connection but you have not yet received any incoming connections. Your firewall or home router probably isn&apos;t configured to foward incoming TCP connections to your computer. Bitmessage will work just fine but it would help the Bitmessage network if you allowed for incoming connections and will help you be a better-connected node.</source>
<translation type="obsolete">Yee have made least one connection to a peer pirate usin&apos; outgoing connection but yee not yet received any incoming connections. Yee firewall, witches nest, or home router probably shant configured to foward incoming TCP connections to yee computer. Bitmessage be workin&apos; just fine but it help fellow pirates if yee allowed for incoming connections and will help yee be a better-connected node matey.</translation>
</message>
<message>
<location filename="../bitmessageqt/iconglossary.py" line="85"/>
<source>You are using TCP port ?. (This can be changed in the settings).</source>
<translation>使用中のポート ? (設定で変更できます)。</translation>
</message>
<message>
<location filename="../bitmessageqt/iconglossary.py" line="86"/>
<source>You do have connections with other peers and your firewall is correctly configured.</source>
<translation>ファイアーウォールを適切に設定し、他のpeerへ接続してください。</translation>
</message>
<message>
<location filename="../bitmessageqt/iconglossary.py" line="84"/>
<source>You have made at least one connection to a peer using an outgoing connection but you have not yet received any incoming connections. Your firewall or home router probably isn&apos;t configured to forward incoming TCP connections to your computer. Bitmessage will work just fine but it would help the Bitmessage network if you allowed for incoming connections and will help you be a better-connected node.</source>
<translation>発信接続のために1つ以上のピアへ接続を行っていますが、まだ着信接続を受け取っていません。ファイアーウォールかホームルーターが外部からこのコンピューターへのTCP接続を受け取れるように設定されていないかも知れません。Bitmessageは正常に動作しますが、外部からの接続を許可してより良く接続されたードになることはBitmessageネットワークへの助けになります。</translation>
</message>
</context>
<context>
<name>networkstatus</name>
<message>
<location filename="../bitmessageqt/networkstatus.ui" line="23"/>
<source>Total connections:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/networkstatus.ui" line="36"/>
<source>Since startup:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/networkstatus.ui" line="49"/>
<source>Processed 0 person-to-person messages.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/networkstatus.ui" line="62"/>
<source>Processed 0 public keys.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/networkstatus.ui" line="75"/>
<source>Processed 0 broadcasts.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/networkstatus.ui" line="88"/>
<source>Inventory lookups per second: 0</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/networkstatus.ui" line="101"/>
<source>Down: 0 KB/s</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/networkstatus.ui" line="114"/>
<source>Up: 0 KB/s</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/networkstatus.ui" line="127"/>
<source>Objects to be synced:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/networkstatus.ui" line="208"/>
<source>Stream #</source>
<translation type="unfinished">ストリーム #</translation>
</message>
<message>
<location filename="../bitmessageqt/networkstatus.ui" line="213"/>
<source>Connections</source>
<translation type="unfinished">接続</translation>
</message>
</context>
<context>
<name>newChanDialog</name>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="97"/>
<source>Dialog</source>
<translation>ダイアログ</translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="98"/>
<source>Create a new chan</source>
<translation>新しいchanを作成</translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="103"/>
<source>Join a chan</source>
<translation>chanに参加</translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="100"/>
<source>Create a chan</source>
<translation>chanを作成</translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="101"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Enter a name for your chan. If you choose a sufficiently complex chan name (like a strong and unique passphrase) and none of your friends share it publicly then the chan will be secure and private. If you and someone else both create a chan with the same chan name then it is currently very likely that they will be the same chan.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;chan名を入力してください。強くて一意のパスフレーズのように十分に複雑なchan名を選び、あなたの友人たちがそれを他人に教えない限りchanはセキュアでプライベートです。あなたと他の誰かが同じ名前のchanを作成した場合、現状では同じchanになる可能性が非常に高い。&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="105"/>
<source>Chan name:</source>
<translation>Chan名:</translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="104"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;A chan exists when a group of people share the same decryption keys. The keys and bitmessage address used by a chan are generated from a human-friendly word or phrase (the chan name). To send a message to everyone in the chan, send a normal person-to-person message to the chan address.&lt;/p&gt;&lt;p&gt;Chans are experimental and completely unmoderatable.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;chanは人々のグループに復号鍵を共有されることで存在します。chanで使われる鍵とBitmessageアドレスは読みやすい単語、またはフレーズchan名から生成されます。chanに居る人たちへメッセージを送るには、通常の一対一のメッセージをchanアドレスへ送ります。&lt;/p&gt;&lt;p&gt;chansは実験的機能で、内容を管理するモデレーターを設けることはできません。&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="106"/>
<source>Chan bitmessage address:</source>
<translation>chanのbitmessageアドレス:</translation>
</message>
</context>
<context>
<name>regenerateAddressesDialog</name>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="114"/>
<source>Regenerate Existing Addresses</source>
<translation>既存のアドレスを再生成する</translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="115"/>
<source>Regenerate existing addresses</source>
<translation>既存のアドレスを再生成する</translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="116"/>
<source>Passphrase</source>
<translation>パスフレーズ</translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="117"/>
<source>Number of addresses to make based on your passphrase:</source>
<translation>パスフレーズから生成されたアドレスの数:</translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="108"/>
<source>Address version Number:</source>
<translation type="obsolete">アドレスのバージョン番号:</translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="119"/>
<source>Stream number:</source>
<translation>ストリーム数:</translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="120"/>
<source>1</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="121"/>
<source>Spend several minutes of extra computing time to make the address(es) 1 or 2 characters shorter</source>
<translation>アドレスを1、2文字短くするために数分間追加の計算処理を行う</translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="122"/>
<source>You must check (or not check) this box just like you did (or didn&apos;t) when you made your addresses the first time.</source>
<translation>もしあなたが初めてアドレスを作ったのであればこのボックスをチェックする必要があります。(そうでない場合はしないでください)。</translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="123"/>
<source>If you have previously made deterministic addresses but lost them due to an accident (like hard drive failure), you can regenerate them here. If you used the random number generator to make your addresses then this form will be of no use to you.</source>
<translation>もし以前にdeterministicアドレスを作ったことがあり、何かしらのトラブルハードディスクの故障のようなでそれを紛失していた場合、ここで再生成することができます。もし乱数でアドレスを作っていたのであればこのフォームは再生成には使えません。</translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="118"/>
<source>Address version number:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>settingsDialog</name>
<message>
<location filename="../bitmessageqt/settings.py" line="456"/>
<source>Settings</source>
<translation>設定</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="457"/>
<source>Start Bitmessage on user login</source>
<translation>ユーザのログイン時にBitmessageを起動</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="459"/>
<source>Start Bitmessage in the tray (don&apos;t show main window)</source>
<translation>Bitmessageをトレイ内で起動するメインウィンドウを表示しない</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="460"/>
<source>Minimize to tray</source>
<translation>タスクトレイへ最小化</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="462"/>
<source>Show notification when message received</source>
<translation>メッセージの受信時に通知する</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="463"/>
<source>Run in Portable Mode</source>
<translation>ポータブルモードで実行</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="464"/>
<source>In Portable Mode, messages and config files are stored in the same directory as the program rather than the normal application-data folder. This makes it convenient to run Bitmessage from a USB thumb drive.</source>
<translation>ポータブルモード時、メッセージと設定ファイルは通常のアプリケーションデータのフォルダではなく同じディレクトリに保存されます。これによりBitmessageをUSBドライブから実行できます。</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="472"/>
<source>User Interface</source>
<translation>ユーザインターフェース</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="473"/>
<source>Listening port</source>
<translation>リスニングポート</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="474"/>
<source>Listen for connections on port:</source>
<translation>接続を待つポート:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="479"/>
<source>Proxy server / Tor</source>
<translation>プロキシサーバー/Tor</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="480"/>
<source>Type:</source>
<translation>タイプ:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="487"/>
<source>none</source>
<translation>無し</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="488"/>
<source>SOCKS4a</source>
<translation>SOCKS4a</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="489"/>
<source>SOCKS5</source>
<translation>SOCKS5</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="481"/>
<source>Server hostname:</source>
<translation>サーバーホスト名:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="504"/>
<source>Port:</source>
<translation>ポート:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="483"/>
<source>Authentication</source>
<translation>認証</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="505"/>
<source>Username:</source>
<translation>ユーザー名:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="485"/>
<source>Pass:</source>
<translation>パス:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="490"/>
<source>Network Settings</source>
<translation>ネットワーク設定</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="494"/>
<source>When someone sends you a message, their computer must first complete some work. The difficulty of this work, by default, is 1. You may raise this default for new addresses you create by changing the values here. Any new addresses you create will require senders to meet the higher difficulty. There is one exception: if you add a friend or acquaintance to your address book, Bitmessage will automatically notify them when you next send a message that they need only complete the minimum amount of work: difficulty 1. </source>
<translation>誰かがあなたにメッセージを送る時、相手のコンピューターはいくらか計算処理を行います。処理の難易度はデフォルトでは1です。この値を変更すると新しいアドレスではこのデフォルト値を引き上げることができます。その場合、新しいアドレスはメッセージの送信者により高い難易度を要求します。例外もあります: 友人や知り合いをアドレス帳に登録すると、Bitmessageは次にメッセージを送る際、自動的に要求される処理の難易度を最低限の1で済むように通知します。</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="491"/>
<source>Total difficulty:</source>
<translation>全体の難易度:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="493"/>
<source>Small message difficulty:</source>
<translation>小さいメッセージの難易度:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="495"/>
<source>The &apos;Small message difficulty&apos; mostly only affects the difficulty of sending small messages. Doubling this value makes it almost twice as difficult to send a small message but doesn&apos;t really affect large messages.</source>
<translation>「小さいメッセージの難易度」は小さいメッセージを行う時にだけ影響します。この値を二倍にすれば小さなメッセージに必要な処理の難易度は二倍になりますが、実際にはデータ量の多いメッセージには影響しません。</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="492"/>
<source>The &apos;Total difficulty&apos; affects the absolute amount of work the sender must complete. Doubling this value doubles the amount of work.</source>
<translation>「全体の難易度」は完全に全てのメッセージに影響します。この値を二倍にすると処理量も二倍になります。</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="496"/>
<source>Demanded difficulty</source>
<translation>要求される難易度</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="465"/>
<source>Willingly include unencrypted destination address when sending to a mobile device</source>
<translation>携帯端末にメッセージを送る時は暗号化されていないアドレスを許可する</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="343"/>
<source>Override automatic language localization (use countycode or language code, e.g. &apos;en_US&apos; or &apos;en&apos;):</source>
<translation type="obsolete">自動的に設定された言語・地域を上書きする(国コード、または言語コードを入力。例:「en_US」または「en」:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="486"/>
<source>Listen for incoming connections when using proxy</source>
<translation>プロキシ使用時に外部からの接続を待機する</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="497"/>
<source>Here you may set the maximum amount of work you are willing to do to send a message to another person. Setting these values to 0 means that any value is acceptable.</source>
<translation>ここでは他のユーザーへメッセージを送る際に行うことを許可する処理量の上限を設定します。0を設定するとどんな量でも許容します。</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="498"/>
<source>Maximum acceptable total difficulty:</source>
<translation>許可する難易度の上限:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="499"/>
<source>Maximum acceptable small message difficulty:</source>
<translation>小さなメッセージに許可する難易度の上限:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="500"/>
<source>Max acceptable difficulty</source>
<translation>許可する最大の難易度</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="502"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Bitmessage can utilize a different Bitcoin-based program called Namecoin to make addresses human-friendly. For example, instead of having to tell your friend your long Bitmessage address, you can simply tell him to send a message to &lt;span style=&quot; font-style:italic;&quot;&gt;test. &lt;/span&gt;&lt;/p&gt;&lt;p&gt;(Getting your own Bitmessage address into Namecoin is still rather difficult).&lt;/p&gt;&lt;p&gt;Bitmessage can use either namecoind directly or a running nmcontrol instance.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Bitmessageはアドレスを読みやすくするため、NamecoinというBitcoinベースの別のプログラムを利用できます。例えば、あなたの友人に長いBitmessageアドレスを伝える代わりに、単純に&lt;span style=&quot; font-style:italic;&quot;&gt;テスト&lt;/span&gt;でメッセージを送るよう伝えることができます。&lt;/p&gt;&lt;p&gt;Bitmessageアドレスを独自にNamecoinにするのはかなり難しいです&lt;/p&gt;&lt;p&gt;Bitmessageは直接namecoindを使うか、nmcontrolインスタンスを使うことができます。&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="503"/>
<source>Host:</source>
<translation>ホスト:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="506"/>
<source>Password:</source>
<translation>パスワード:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="507"/>
<source>Test</source>
<translation>テスト</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="508"/>
<source>Connect to:</source>
<translation>接続先:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="509"/>
<source>Namecoind</source>
<translation>Namecoind</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="510"/>
<source>NMControl</source>
<translation>NMControl</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="511"/>
<source>Namecoin integration</source>
<translation>Namecoin連携</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="458"/>
<source>Tray</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="461"/>
<source>Close to tray</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="466"/>
<source>Use Identicons</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="467"/>
<source>Reply below Quote</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="468"/>
<source>Interface Language</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="469"/>
<source>System Settings</source>
<comment>system</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="470"/>
<source>Pirate English</source>
<comment>en_pirate</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="471"/>
<source>Other (set in keys.dat)</source>
<comment>other</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="475"/>
<source>UPnP:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="476"/>
<source>Bandwidth limit</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="477"/>
<source>Maximum download rate (kB/s): [0: unlimited]</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="478"/>
<source>Maximum upload rate (kB/s): [0: unlimited]</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="501"/>
<source>Hardware GPU acceleration (OpenCL)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="512"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;By default, if you send a message to someone and he is offline for more than two days, Bitmessage will send the message again after an additional two days. This will be continued with exponential backoff forever; messages will be resent after 5, 10, 20 days ect. until the receiver acknowledges them. Here you may change that behavior by having Bitmessage give up after a certain number of days or months.&lt;/p&gt;&lt;p&gt;Leave these input fields blank for the default behavior. &lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="513"/>
<source>Give up after</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="514"/>
<source>and</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="515"/>
<source>days</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="516"/>
<source>months.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="517"/>
<source>Resends Expire</source>
<translation type="unfinished"></translation>
</message>
</context>
</TS>