cis-kuldeep/PyBitmessage-2021-04-27
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
e78c5820af
PyBitmessage-2021-04-27/src/translations/bitmessage_nl.ts
mailchuck 9b78708e78 Shorten trashed summary 
Trash UI now exists, there is no need to tell the user it doesn't.
2015-09-30 11:30:21 +02:00

1660 lines
75 KiB
XML
Raw Blame History

<?xml version="1.0" encoding="utf-8"?>
<!DOCTYPE TS>
<TS version="2.0" language="nl" sourcelanguage="en">
<context>
<name>AddAddressDialog</name>
<message>
<location filename="../bitmessageqt/addaddressdialog.py" line="62"/>
<source>Add new entry</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/addaddressdialog.py" line="63"/>
<source>Label</source>
<translation>Label</translation>
</message>
<message>
<location filename="../bitmessageqt/addaddressdialog.py" line="64"/>
<source>Address</source>
<translation>Adres</translation>
</message>
</context>
<context>
<name>MainWindow</name>
<message>
<location filename="../bitmessageqt/__init__.py" line="457"/>
<source>One of your addresses, %1, is an old version 1 address. Version 1 addresses are no longer supported. May we delete it now?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="232"/>
<source>Reply</source>
<translation>Reageer</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="234"/>
<source>Add sender to your Address Book</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="386"/>
<source>Move to Trash</source>
<translation>Verplaats naar Prullenbak</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="241"/>
<source>View HTML code as formatted text</source>
<translation>Bekijk HTML als geformatteerde tekst</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="245"/>
<source>Save message as...</source>
<translation>Bewaar bericht als</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="249"/>
<source>Mark Unread</source>
<translation>Markeer Ongelezen</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="584"/>
<source>New</source>
<translation>Nieuw</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="419"/>
<source>Enable</source>
<translation>Inschakelen</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="422"/>
<source>Disable</source>
<translation>Uitschakelen</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="415"/>
<source>Copy address to clipboard</source>
<translation>Kopieer adres naar klembord</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="287"/>
<source>Special address behavior...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="310"/>
<source>Send message to this address</source>
<translation>Stuur bericht naar dit adres</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="318"/>
<source>Subscribe to this address</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="326"/>
<source>Add New Address</source>
<translation>Nieuw adres toevoegen</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="412"/>
<source>Delete</source>
<translation>Verwijder</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="389"/>
<source>Copy destination address to clipboard</source>
<translation>Kopieer bestemmingsadres naar klembord</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="393"/>
<source>Force send</source>
<translation>Forceer zenden</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="611"/>
<source>Add new entry</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="575"/>
<source>Since startup on %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="823"/>
<source>Waiting for their encryption key. Will request it again soon.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="826"/>
<source>Encryption key request queued.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="829"/>
<source>Queued.</source>
<translation>In wachtrij.</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="832"/>
<source>Message sent. Waiting for acknowledgement. Sent at %1</source>
<translation>Bericht verzonden. Wachten op bevestiging. Verzonden op %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="835"/>
<source>Message sent. Sent at %1</source>
<translation>Bericht verzonden. Verzonden op %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="838"/>
<source>Need to do work to send message. Work is queued.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="841"/>
<source>Acknowledgement of the message received %1</source>
<translation>Bevestiging van het bericht ontvangen op %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="844"/>
<source>Broadcast queued.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="847"/>
<source>Broadcast on %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="850"/>
<source>Problem: The work demanded by the recipient is more difficult than you are willing to do. %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="853"/>
<source>Problem: The recipient&apos;s encryption key is no good. Could not encrypt message. %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="856"/>
<source>Forced difficulty override. Send should start soon.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="859"/>
<source>Unknown status: %1 %2</source>
<translation>Status onbekend: %1 %2</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1541"/>
<source>Not Connected</source>
<translation>Niet Verbonden</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1003"/>
<source>Show Bitmessage</source>
<translation>Toon Bitmessage</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="567"/>
<source>Send</source>
<translation>Verzend</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1018"/>
<source>Subscribe</source>
<translation>Abonneer</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="608"/>
<source>Address Book</source>
<translation>Adresboek</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="634"/>
<source>Quit</source>
<translation>Sluiten</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1321"/>
<source>You may manage your keys by editing the keys.dat file stored in the same directory as this program. It is important that you back up this file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1325"/>
<source>You may manage your keys by editing the keys.dat file stored in
%1
It is important that you back up this file.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1332"/>
<source>Open keys.dat?</source>
<translation>keys.dat openen?</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1329"/>
<source>You may manage your keys by editing the keys.dat file stored in the same directory as this program. It is important that you back up this file. Would you like to open the file now? (Be sure to close Bitmessage before making any changes.)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1332"/>
<source>You may manage your keys by editing the keys.dat file stored in
%1
It is important that you back up this file. Would you like to open the file now? (Be sure to close Bitmessage before making any changes.)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1338"/>
<source>Delete trash?</source>
<translation>Prullenbak legen?</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1338"/>
<source>Are you sure you want to delete all trashed messages?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1347"/>
<source>bad passphrase</source>
<translation>verkeerd wachtwoord</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1347"/>
<source>You must type your passphrase. If you don&apos;t have one then this is not the form for you.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1392"/>
<source>Chan name needed</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1392"/>
<source>You didn&apos;t enter a chan name.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1412"/>
<source>Address already present</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1412"/>
<source>Could not add chan because it appears to already be one of your identities.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1416"/>
<source>Success</source>
<translation>Gelukt</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1387"/>
<source>Successfully created chan. To let others join your chan, give them the chan name and this Bitmessage address: %1. This address also appears in &apos;Your Identities&apos;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1396"/>
<source>Address too new</source>
<translation>Adres te nieuw</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1396"/>
<source>Although that Bitmessage address might be valid, its version number is too new for us to handle. Perhaps you need to upgrade Bitmessage.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1400"/>
<source>Address invalid</source>
<translation>Adres ongeldig</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1400"/>
<source>That Bitmessage address is not valid.</source>
<translation>Dat Bitmessage adres is niet geldig.</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1408"/>
<source>Address does not match chan name</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1408"/>
<source>Although the Bitmessage address you entered was valid, it doesn&apos;t match the chan name.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1416"/>
<source>Successfully joined chan. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1458"/>
<source>Processed %1 person-to-person messages.</source>
<translation>Verwerkt %1 peer-to-peer-bericht(en).</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1462"/>
<source>Processed %1 broadcast messages.</source>
<translation>Verwerkt %1 broadcast-bericht(en).</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1466"/>
<source>Processed %1 public keys.</source>
<translation>Verwerkt %1 publieke sleutel(s).</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1510"/>
<source>Total Connections: %1</source>
<translation>Aantal Connecties: %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1535"/>
<source>Connection lost</source>
<translation>Verbinding verloren</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1576"/>
<source>Connected</source>
<translation>Verbonden</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1622"/>
<source>Message trashed</source>
<translation>Bericht weggegooit </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1783"/>
<source>Error: Bitmessage addresses start with BM- Please check %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1786"/>
<source>Error: The address %1 is not typed or copied correctly. Please check it.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1789"/>
<source>Error: The address %1 contains invalid characters. Please check it.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1792"/>
<source>Error: The address version in %1 is too high. Either you need to upgrade your Bitmessage software or your acquaintance is being clever.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1795"/>
<source>Error: Some data encoded in the address %1 is too short. There might be something wrong with the software of your acquaintance.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1798"/>
<source>Error: Some data encoded in the address %1 is too long. There might be something wrong with the software of your acquaintance.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1801"/>
<source>Error: Something is wrong with the address %1.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1861"/>
<source>Error: You must specify a From address. If you don&apos;t have one, go to the &apos;Your Identities&apos; tab.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1809"/>
<source>Address version number</source>
<translation>Adres versienummer</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1809"/>
<source>Concerning the address %1, Bitmessage cannot understand address version numbers of %2. Perhaps upgrade Bitmessage to the latest version.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1813"/>
<source>Stream number</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1813"/>
<source>Concerning the address %1, Bitmessage cannot handle stream numbers of %2. Perhaps upgrade Bitmessage to the latest version.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1818"/>
<source>Warning: You are currently not connected. Bitmessage will do the work necessary to send the message but it won&apos;t send until you connect.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1857"/>
<source>Your &apos;To&apos; field is empty.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1897"/>
<source>Right click one or more entries in your address book and select &apos;Send message to this address&apos;.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1908"/>
<source>Fetched address from namecoin identity.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1987"/>
<source>Work is queued. %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2045"/>
<source>New Message</source>
<translation>Nieuw Bericht</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2045"/>
<source>From </source>
<translation>Van </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3554"/>
<source>Address is valid.</source>
<translation>Adres is geldig.</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2424"/>
<source>The address you entered was invalid. Ignoring it.</source>
<translation>Het ingevoerd adres is ongeldig. Worden genegeerd.</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2636"/>
<source>Error: You cannot add the same address to your address book twice. Try renaming the existing one if you want.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2783"/>
<source>Error: You cannot add the same address to your subsciptions twice. Perhaps rename the existing one if you want.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2217"/>
<source>Restart</source>
<translation>Herstarten</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2209"/>
<source>You must restart Bitmessage for the port number change to take effect.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2217"/>
<source>Bitmessage will use your proxy from now on but you may want to manually restart Bitmessage now to close existing connections (if any).</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2421"/>
<source>Error: You cannot add the same address to your list twice. Perhaps rename the existing one if you want.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2474"/>
<source>Passphrase mismatch</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2474"/>
<source>The passphrase you entered twice doesn&apos;t match. Try again.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2477"/>
<source>Choose a passphrase</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2477"/>
<source>You really do need a passphrase.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2500"/>
<source>All done. Closing user interface...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2580"/>
<source>Address is gone</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2580"/>
<source>Bitmessage cannot find your address %1. Perhaps you removed it?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2584"/>
<source>Address disabled</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2584"/>
<source>Error: The address from which you are trying to send is disabled. You&apos;ll have to enable it on the &apos;Your Identities&apos; tab before using it.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2633"/>
<source>Entry added to the Address Book. Edit the label to your liking.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2692"/>
<source>Moved items to trash.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2672"/>
<source>Save As...</source>
<translation>Opslaan als...</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2681"/>
<source>Write error.</source>
<translation>Schrijffout.</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2769"/>
<source>No addresses selected.</source>
<translation>Geen adressen geselecteerd.</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3438"/>
<source>Testing...</source>
<translation>Testen...</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3479"/>
<source>This is a chan address. You cannot use it as a pseudo-mailing list.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3536"/>
<source>The address should start with &apos;&apos;BM-&apos;&apos;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3539"/>
<source>The address is not typed or copied correctly (the checksum failed).</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3542"/>
<source>The version number of this address is higher than this software can support. Please upgrade Bitmessage.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3545"/>
<source>The address contains invalid characters.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3548"/>
<source>Some data encoded in the address is too short.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3551"/>
<source>Some data encoded in the address is too long.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3617"/>
<source>You are using TCP port %1. (This can be changed in the settings).</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="535"/>
<source>Bitmessage</source>
<translation>Bitmessage</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="568"/>
<source>Search</source>
<translation>Zoeken</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="569"/>
<source>All</source>
<translation>Alle</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="576"/>
<source>To</source>
<translation>Naar</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="578"/>
<source>From</source>
<translation>Van</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="580"/>
<source>Subject</source>
<translation>Onderwerp</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="573"/>
<source>Message</source>
<translation>Bericht</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="550"/>
<source>Received</source>
<translation>Ontvangen</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="551"/>
<source>Inbox</source>
<translation>Postvak IN</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="552"/>
<source>Load from Address book</source>
<translation>Laden uit adresboek</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="553"/>
<source>Fetch Namecoin ID</source>
<translation>Ophalen Namecoin ID</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="554"/>
<source>Message:</source>
<translation>Bericht:</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="555"/>
<source>Subject:</source>
<translation>Onderwerp:</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="556"/>
<source>Send to one or more specific people</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="562"/>
<source>To:</source>
<translation>Naar:</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="563"/>
<source>From:</source>
<translation>Van:</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="564"/>
<source>Broadcast to everyone who is subscribed to your address</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="566"/>
<source>Be aware that broadcasts are only encrypted with your address. Anyone who knows your address can read them.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="582"/>
<source>Status</source>
<translation>Status</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="583"/>
<source>Sent</source>
<translation>Verzonden</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="587"/>
<source>Label (not shown to anyone)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="616"/>
<source>Address</source>
<translation>Adres</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="591"/>
<source>Stream</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="592"/>
<source>Your Identities</source>
<translation>Uw identiteiten</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="593"/>
<source>Here you can subscribe to &apos;broadcast messages&apos; that are sent by other users. Messages will appear in your Inbox. Addresses here override those on the Blacklist tab.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="594"/>
<source>Add new Subscription</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="597"/>
<source>Label</source>
<translation>Label</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="600"/>
<source>Subscriptions</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="601"/>
<source>The Address book is useful for adding names or labels to other people&apos;s Bitmessage addresses so that you can recognize them more easily in your inbox. You can add entries here using the &apos;Add&apos; button, or from your inbox by right-clicking on a message.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="614"/>
<source>Name or Label</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="609"/>
<source>Use a Blacklist (Allow all incoming messages except those on the Blacklist)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="610"/>
<source>Use a Whitelist (Block all incoming messages except those on the Whitelist)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="617"/>
<source>Blacklist</source>
<translation>Zwarte lijst</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="619"/>
<source>Stream #</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="621"/>
<source>Connections</source>
<translation>Verbindingen</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="622"/>
<source>Total connections: 0</source>
<translation>Aantal Connecties: 0</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="623"/>
<source>Since startup at asdf:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="624"/>
<source>Processed 0 person-to-person message.</source>
<translation>Verwerkt 0 peer-to-peer-bericht.</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="625"/>
<source>Processed 0 public key.</source>
<translation>Verwerkt 0 broadcast-bericht.</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="626"/>
<source>Processed 0 broadcast.</source>
<translation>Verwerkt 0 publieke sleutel.</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="628"/>
<source>Network Status</source>
<translation>netwerkstatus</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="629"/>
<source>File</source>
<translation>Bestand</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="639"/>
<source>Settings</source>
<translation>Instellingen</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="636"/>
<source>Help</source>
<translation>Help</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="632"/>
<source>Import keys</source>
<translation>Importeer sleutels</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="633"/>
<source>Manage keys</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="635"/>
<source>Ctrl+Q</source>
<translation>Ctrl+Q</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="637"/>
<source>F1</source>
<translation>F1</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="638"/>
<source>About</source>
<translation>Over</translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="640"/>
<source>Regenerate deterministic addresses</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="641"/>
<source>Delete all trashed messages</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="642"/>
<source>Join / Create chan</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2998"/>
<source>Set avatar...</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1359"/>
<source>Bad address version number</source>
<translation>Slechte adres versienummer</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1356"/>
<source>Your address version number must be a number: either 3 or 4.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1359"/>
<source>Your address version number must be either 3 or 4.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1519"/>
<source>Inventory lookups per second: %1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2286"/>
<source>Will not resend ever</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2286"/>
<source>Note that the time limit you entered is less than the amount of time Bitmessage waits for the first resend attempt therefore your messages will never be resent.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3005"/>
<source>Do you really want to remove this avatar?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3013"/>
<source>You have already set an avatar for this address. Do you really want to overwrite it?</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3287"/>
<source>Start-on-login not yet supported on your OS.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3290"/>
<source>Minimize-to-tray not yet supported on your OS.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3283"/>
<source>Tray notifications not yet supported on your OS.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3528"/>
<source>Enter an address above.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3557"/>
<source>Address is an old type. We cannot display its past broadcasts.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3567"/>
<source>There are no recent broadcasts from this address to display.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3571"/>
<source>Display the %1 recent broadcast from this address.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3575"/>
<source>Display the %1 recent broadcasts from this address.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="557"/>
<source>&lt;!DOCTYPE HTML PUBLIC &quot;-//W3C//DTD HTML 4.0//EN&quot; &quot;http://www.w3.org/TR/REC-html40/strict.dtd&quot;&gt;
&lt;html&gt;&lt;head&gt;&lt;meta name=&quot;qrichtext&quot; content=&quot;1&quot; /&gt;&lt;style type=&quot;text/css&quot;&gt;
p, li { white-space: pre-wrap; }
&lt;/style&gt;&lt;/head&gt;&lt;body style=&quot; font-family:&apos;Sans&apos;; font-size:9pt; font-weight:400; font-style:normal;&quot;&gt;
&lt;p style=&quot;-qt-paragraph-type:empty; margin-top:0px; margin-bottom:0px; margin-left:0px; margin-right:0px; -qt-block-indent:0; text-indent:0px; font-family:&apos;MS Shell Dlg 2&apos;;&quot;&gt;&lt;br /&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/bitmessageui.py" line="627"/>
<source>Inventory lookups per second: 0</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>NewAddressDialog</name>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="173"/>
<source>Create new Address</source>
<translation>Nieuw adres aanmaken</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="174"/>
<source>Here you may generate as many addresses as you like. Indeed, creating and abandoning addresses is encouraged. You may generate addresses by using either random numbers or by using a passphrase. If you use a passphrase, the address is called a &quot;deterministic&quot; address.
The &apos;Random Number&apos; option is selected by default but deterministic addresses have several pros and cons:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="176"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;&lt;span style=&quot; font-weight:600;&quot;&gt;Pros:&lt;br/&gt;&lt;/span&gt;You can recreate your addresses on any computer from memory. &lt;br/&gt;You need-not worry about backing up your keys.dat file as long as you can remember your passphrase. &lt;br/&gt;&lt;span style=&quot; font-weight:600;&quot;&gt;Cons:&lt;br/&gt;&lt;/span&gt;You must remember (or write down) your passphrase if you expect to be able to recreate your keys if they are lost. &lt;br/&gt;You must remember the address version number and the stream number along with your passphrase. &lt;br/&gt;If you choose a weak passphrase and someone on the Internet can brute-force it, they can read your messages and send messages as you.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="177"/>
<source>Use a random number generator to make an address</source>
<translation>Gebruik een willekeurige nummer generator om een adres te maken</translation>
</message>
<message>
<location filename="newaddressdialog.py" line="169"/>
<source>Use a passpharase to make addresses</source>
<translation type="obsolete">Use yee passpharase to make arrddresses</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="179"/>
<source>Spend several minutes of extra computing time to make the address(es) 1 or 2 characters shorter</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="180"/>
<source>Make deterministic addresses</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="181"/>
<source>Address version number: 3</source>
<translation type="obsolete">Arrddress version number: 3</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="182"/>
<source>In addition to your passphrase, you must remember these numbers:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="183"/>
<source>Passphrase</source>
<translation>Wachtwoord</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="184"/>
<source>Number of addresses to make based on your passphrase:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="185"/>
<source>Stream number: 1</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="186"/>
<source>Retype passphrase</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="187"/>
<source>Randomly generate address</source>
<translation>Genereer willekeurig adres</translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="188"/>
<source>Label (not shown to anyone except you)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="189"/>
<source>Use the most available stream</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="190"/>
<source> (best if this is the first of many addresses you will create)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="191"/>
<source>Use the same stream as an existing address</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="192"/>
<source>(saves you some bandwidth and processing power)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="178"/>
<source>Use a passphrase to make addresses</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newaddressdialog.py" line="181"/>
<source>Address version number: 4</source>
<translation>Adres versienummer: 4</translation>
</message>
</context>
<context>
<name>NewSubscriptionDialog</name>
<message>
<location filename="../bitmessageqt/newsubscriptiondialog.py" line="65"/>
<source>Add new entry</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newsubscriptiondialog.py" line="66"/>
<source>Label</source>
<translation>Label</translation>
</message>
<message>
<location filename="../bitmessageqt/newsubscriptiondialog.py" line="67"/>
<source>Address</source>
<translation>Adres</translation>
</message>
<message>
<location filename="../bitmessageqt/newsubscriptiondialog.py" line="68"/>
<source>CheckBox</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>SpecialAddressBehaviorDialog</name>
<message>
<location filename="../bitmessageqt/specialaddressbehavior.py" line="59"/>
<source>Special Address Behavior</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/specialaddressbehavior.py" line="60"/>
<source>Behave as a normal address</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/specialaddressbehavior.py" line="61"/>
<source>Behave as a pseudo-mailing-list address</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/specialaddressbehavior.py" line="62"/>
<source>Mail received to a pseudo-mailing-list address will be automatically broadcast to subscribers (and thus will be public).</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/specialaddressbehavior.py" line="63"/>
<source>Name of the pseudo-mailing-list:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>aboutDialog</name>
<message>
<location filename="../bitmessageqt/about.py" line="67"/>
<source>PyBitmessage</source>
<translation>PyBitmessage</translation>
</message>
<message>
<location filename="../bitmessageqt/about.py" line="68"/>
<source>version ?</source>
<translation type="unfinished">Versie ?</translation>
</message>
<message>
<location filename="../bitmessageqt/about.py" line="66"/>
<source>About</source>
<translation>Over</translation>
</message>
<message>
<location filename="../bitmessageqt/about.py" line="70"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Distributed under the MIT/X11 software license; see &lt;a href=&quot;http://www.opensource.org/licenses/mit-license.php&quot;&gt;&lt;span style=&quot; text-decoration: underline; color:#0000ff;&quot;&gt;http://www.opensource.org/licenses/mit-license.php&lt;/span&gt;&lt;/a&gt;&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/about.py" line="71"/>
<source>This is Beta software.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/about.py" line="69"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Copyright © 2012-2013 Jonathan Warren&lt;br/&gt;Copyright © 2013 The Bitmessage Developers&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>connectDialog</name>
<message>
<location filename="../bitmessageqt/connect.py" line="56"/>
<source>Bitmessage</source>
<translation>Bitmessage</translation>
</message>
<message>
<location filename="../bitmessageqt/connect.py" line="57"/>
<source>Bitmessage won&apos;t connect to anyone until you let it. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/connect.py" line="58"/>
<source>Connect now</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/connect.py" line="59"/>
<source>Let me configure special network settings first</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>helpDialog</name>
<message>
<location filename="../bitmessageqt/help.py" line="45"/>
<source>Help</source>
<translation>Help</translation>
</message>
<message>
<location filename="../bitmessageqt/help.py" line="46"/>
<source>&lt;a href=&quot;http://Bitmessage.org/wiki/PyBitmessage_Help&quot;&gt;http://Bitmessage.org/wiki/PyBitmessage_Help&lt;/a&gt;</source>
<translation>&lt;a href=&quot;http://Bitmessage.org/wiki/PyBitmessage_Help&quot;&gt;http://Bitmessage.org/wiki/PyBitmessage_Help&lt;/a&gt;</translation>
</message>
<message>
<location filename="../bitmessageqt/help.py" line="47"/>
<source>As Bitmessage is a collaborative project, help can be found online in the Bitmessage Wiki:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>iconGlossaryDialog</name>
<message>
<location filename="../bitmessageqt/iconglossary.py" line="82"/>
<source>Icon Glossary</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/iconglossary.py" line="83"/>
<source>You have no connections with other peers. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="iconglossary.py" line="75"/>
<source>You have made at least one connection to a peer using an outgoing connection but you have not yet received any incoming connections. Your firewall or home router probably isn&apos;t configured to foward incoming TCP connections to your computer. Bitmessage will work just fine but it would help the Bitmessage network if you allowed for incoming connections and will help you be a better-connected node.</source>
<translation type="obsolete">Yee have made least one connection to a peer pirate usin&apos; outgoing connection but yee not yet received any incoming connections. Yee firewall, witches nest, or home router probably shant configured to foward incoming TCP connections to yee computer. Bitmessage be workin&apos; just fine but it help fellow pirates if yee allowed for incoming connections and will help yee be a better-connected node matey.</translation>
</message>
<message>
<location filename="../bitmessageqt/iconglossary.py" line="85"/>
<source>You are using TCP port ?. (This can be changed in the settings).</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/iconglossary.py" line="86"/>
<source>You do have connections with other peers and your firewall is correctly configured.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/iconglossary.py" line="84"/>
<source>You have made at least one connection to a peer using an outgoing connection but you have not yet received any incoming connections. Your firewall or home router probably isn&apos;t configured to forward incoming TCP connections to your computer. Bitmessage will work just fine but it would help the Bitmessage network if you allowed for incoming connections and will help you be a better-connected node.</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>newChanDialog</name>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="97"/>
<source>Dialog</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="98"/>
<source>Create a new chan</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="103"/>
<source>Join a chan</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="100"/>
<source>Create a chan</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="101"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Enter a name for your chan. If you choose a sufficiently complex chan name (like a strong and unique passphrase) and none of your friends share it publicly then the chan will be secure and private. If you and someone else both create a chan with the same chan name then it is currently very likely that they will be the same chan.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="105"/>
<source>Chan name:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="104"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;A chan exists when a group of people share the same decryption keys. The keys and bitmessage address used by a chan are generated from a human-friendly word or phrase (the chan name). To send a message to everyone in the chan, send a normal person-to-person message to the chan address.&lt;/p&gt;&lt;p&gt;Chans are experimental and completely unmoderatable.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/newchandialog.py" line="106"/>
<source>Chan bitmessage address:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>regenerateAddressesDialog</name>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="114"/>
<source>Regenerate Existing Addresses</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="115"/>
<source>Regenerate existing addresses</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="116"/>
<source>Passphrase</source>
<translation>Wachtwoord</translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="117"/>
<source>Number of addresses to make based on your passphrase:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="108"/>
<source>Address version Number:</source>
<translation type="obsolete">Arrddress version Number:</translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="109"/>
<source>3</source>
<translation type="obsolete">3</translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="119"/>
<source>Stream number:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="120"/>
<source>1</source>
<translation>1</translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="121"/>
<source>Spend several minutes of extra computing time to make the address(es) 1 or 2 characters shorter</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="122"/>
<source>You must check (or not check) this box just like you did (or didn&apos;t) when you made your addresses the first time.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="123"/>
<source>If you have previously made deterministic addresses but lost them due to an accident (like hard drive failure), you can regenerate them here. If you used the random number generator to make your addresses then this form will be of no use to you.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/regenerateaddresses.py" line="118"/>
<source>Address version number:</source>
<translation type="unfinished"></translation>
</message>
</context>
<context>
<name>settingsDialog</name>
<message>
<location filename="../bitmessageqt/settings.py" line="384"/>
<source>Settings</source>
<translation>Instellingen</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="385"/>
<source>Start Bitmessage on user login</source>
<translation>Start Bitmessage bij user login</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="386"/>
<source>Start Bitmessage in the tray (don&apos;t show main window)</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="387"/>
<source>Minimize to tray</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="388"/>
<source>Show notification when message received</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="389"/>
<source>Run in Portable Mode</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="390"/>
<source>In Portable Mode, messages and config files are stored in the same directory as the program rather than the normal application-data folder. This makes it convenient to run Bitmessage from a USB thumb drive.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="404"/>
<source>User Interface</source>
<translation>Gebruikersinterface</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="405"/>
<source>Listening port</source>
<translation>Luisterpoort</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="406"/>
<source>Listen for connections on port:</source>
<translation>Luister voor connecties op poort:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="407"/>
<source>Proxy server / Tor</source>
<translation>Proxy server / Tor</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="408"/>
<source>Type:</source>
<translation>Type:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="415"/>
<source>none</source>
<translation>geen</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="416"/>
<source>SOCKS4a</source>
<translation>SOCKS4a</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="417"/>
<source>SOCKS5</source>
<translation>SOCKS5</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="409"/>
<source>Server hostname:</source>
<translation>Server hostnaam:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="431"/>
<source>Port:</source>
<translation>Poort:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="411"/>
<source>Authentication</source>
<translation>Authenticatie</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="432"/>
<source>Username:</source>
<translation>Gebruikersnaam:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="413"/>
<source>Pass:</source>
<translation>Wachtwoord:</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="418"/>
<source>Network Settings</source>
<translation>Netwerkinstellingen</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="422"/>
<source>When someone sends you a message, their computer must first complete some work. The difficulty of this work, by default, is 1. You may raise this default for new addresses you create by changing the values here. Any new addresses you create will require senders to meet the higher difficulty. There is one exception: if you add a friend or acquaintance to your address book, Bitmessage will automatically notify them when you next send a message that they need only complete the minimum amount of work: difficulty 1. </source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="419"/>
<source>Total difficulty:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="421"/>
<source>Small message difficulty:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="423"/>
<source>The &apos;Small message difficulty&apos; mostly only affects the difficulty of sending small messages. Doubling this value makes it almost twice as difficult to send a small message but doesn&apos;t really affect large messages.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="420"/>
<source>The &apos;Total difficulty&apos; affects the absolute amount of work the sender must complete. Doubling this value doubles the amount of work.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="424"/>
<source>Demanded difficulty</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="391"/>
<source>Willingly include unencrypted destination address when sending to a mobile device</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="414"/>
<source>Listen for incoming connections when using proxy</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="425"/>
<source>Here you may set the maximum amount of work you are willing to do to send a message to another person. Setting these values to 0 means that any value is acceptable.</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="426"/>
<source>Maximum acceptable total difficulty:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="427"/>
<source>Maximum acceptable small message difficulty:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="428"/>
<source>Max acceptable difficulty</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="429"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;Bitmessage can utilize a different Bitcoin-based program called Namecoin to make addresses human-friendly. For example, instead of having to tell your friend your long Bitmessage address, you can simply tell him to send a message to &lt;span style=&quot; font-style:italic;&quot;&gt;test. &lt;/span&gt;&lt;/p&gt;&lt;p&gt;(Getting your own Bitmessage address into Namecoin is still rather difficult).&lt;/p&gt;&lt;p&gt;Bitmessage can use either namecoind directly or a running nmcontrol instance.&lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="430"/>
<source>Host:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="433"/>
<source>Password:</source>
<translation>Wachtwoord</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="434"/>
<source>Test</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="435"/>
<source>Connect to:</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="436"/>
<source>Namecoind</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="437"/>
<source>NMControl</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="438"/>
<source>Namecoin integration</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="392"/>
<source>Use Identicons</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="393"/>
<source>Interface Language</source>
<translation>Interface Taal</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="394"/>
<source>System Settings</source>
<comment>system</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="395"/>
<source>English</source>
<comment>en</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="396"/>
<source>Esperanto</source>
<comment>eo</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="397"/>
<source>Français</source>
<comment>fr</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="398"/>
<source>Deutsch</source>
<comment>de</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="399"/>
<source>Españl</source>
<comment>es</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="400"/>
<source>русский язык</source>
<comment>ru</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="401"/>
<source>Norsk</source>
<comment>no</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="402"/>
<source>Pirate English</source>
<comment>en_pirate</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="403"/>
<source>Other (set in keys.dat)</source>
<comment>other</comment>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="439"/>
<source>&lt;html&gt;&lt;head/&gt;&lt;body&gt;&lt;p&gt;By default, if you send a message to someone and he is offline for more than two days, Bitmessage will send the message again after an additional two days. This will be continued with exponential backoff forever; messages will be resent after 5, 10, 20 days ect. until the receiver acknowledges them. Here you may change that behavior by having Bitmessage give up after a certain number of days or months.&lt;/p&gt;&lt;p&gt;Leave these input fields blank for the default behavior. &lt;/p&gt;&lt;/body&gt;&lt;/html&gt;</source>
<translation type="unfinished"></translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="440"/>
<source>Give up after</source>
<translation>Opgeven na</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="441"/>
<source>and</source>
<translation>en</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="442"/>
<source>days</source>
<translation>dagen</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="443"/>
<source>months.</source>
<translation>maanden.</translation>
</message>
<message>
<location filename="../bitmessageqt/settings.py" line="444"/>
<source>Resends Expire</source>
<translation type="unfinished"></translation>
</message>
</context>
</TS>
Reference in New Issue View Git Blame Copy Permalink