Fixed translate functions not being found as they were being defined after the QT GUI was started

This commit is contained in:
DivineOmega 2013-06-21 16:24:04 +01:00
parent c2cfff2a2e
commit d2d2d8c380

View File

@ -193,7 +193,7 @@ class outgoingSynSender(threading.Thread):
shared.printLock.release()
except socks.Socks5AuthError as err:
shared.UISignalQueue.put((
'updateStatusBar', _translate(
'updateStatusBar', translateText(
"MainWindow", "SOCKS5 Authentication problem: %1").arg(str(err))))
except socks.Socks5Error as err:
pass
@ -1022,7 +1022,7 @@ class receiveDataThread(threading.Thread):
shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (encryptedData[readPosition:], _translate("MainWindow",'Acknowledgement of the message received. %1').arg(unicode(
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (encryptedData[readPosition:], translateText("MainWindow",'Acknowledgement of the message received. %1').arg(unicode(
strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
return
else:
@ -2734,7 +2734,7 @@ class singleWorker(threading.Thread):
fromaddress, 'privencryptionkey')
except:
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, _translate("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
ackdata, translateText("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
continue
privSigningKeyHex = shared.decodeWalletImportFormat(
@ -2769,7 +2769,7 @@ class singleWorker(threading.Thread):
payload) + shared.networkDefaultPayloadLengthExtraBytes + 8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
print '(For broadcast message) Doing proof of work...'
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, _translate("MainWindow", "Doing work necessary to send broadcast..."))))
ackdata, translateText("MainWindow", "Doing work necessary to send broadcast..."))))
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
print '(For broadcast message) Found proof of work', trialValue, 'Nonce:', nonce
@ -2784,7 +2784,7 @@ class singleWorker(threading.Thread):
shared.broadcastToSendDataQueues((
streamNumber, 'sendinv', inventoryHash))
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, _translate("MainWindow", "Broadcast sent on %1").arg(unicode(
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, translateText("MainWindow", "Broadcast sent on %1").arg(unicode(
strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
# Update the status of the message in the 'sent' table to have
@ -2808,7 +2808,7 @@ class singleWorker(threading.Thread):
fromaddress, 'privencryptionkey')
except:
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, _translate("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
ackdata, translateText("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
continue
privSigningKeyHex = shared.decodeWalletImportFormat(
@ -2856,7 +2856,7 @@ class singleWorker(threading.Thread):
payload) + shared.networkDefaultPayloadLengthExtraBytes + 8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
print '(For broadcast message) Doing proof of work...'
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, _translate("MainWindow", "Doing work necessary to send broadcast..."))))
ackdata, translateText("MainWindow", "Doing work necessary to send broadcast..."))))
initialHash = hashlib.sha512(payload).digest()
trialValue, nonce = proofofwork.run(target, initialHash)
print '(For broadcast message) Found proof of work', trialValue, 'Nonce:', nonce
@ -2871,7 +2871,7 @@ class singleWorker(threading.Thread):
shared.broadcastToSendDataQueues((
streamNumber, 'sendinv', inventoryHash))
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, _translate("MainWindow", "Broadcast sent on %1").arg(unicode(
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, translateText("MainWindow", "Broadcast sent on %1").arg(unicode(
strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
# Update the status of the message in the 'sent' table to have
@ -2929,7 +2929,7 @@ class singleWorker(threading.Thread):
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
shared.UISignalQueue.put(('updateSentItemStatusByHash', (
toripe, _translate("MainWindow",'Encryption key was requested earlier.'))))
toripe, translateText("MainWindow",'Encryption key was requested earlier.'))))
else:
# We have not yet sent a request for the pubkey
t = (toaddress,)
@ -2941,7 +2941,7 @@ class singleWorker(threading.Thread):
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
shared.UISignalQueue.put(('updateSentItemStatusByHash', (
toripe, _translate("MainWindow",'Sending a request for the recipient\'s encryption key.'))))
toripe, translateText("MainWindow",'Sending a request for the recipient\'s encryption key.'))))
self.requestPubKey(toaddress)
shared.sqlLock.acquire()
# Get all messages that are ready to be sent, and also all messages
@ -2983,7 +2983,7 @@ class singleWorker(threading.Thread):
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
shared.UISignalQueue.put(('updateSentItemStatusByHash', (
toripe, _translate("MainWindow",'Sending a request for the recipient\'s encryption key.'))))
toripe, translateText("MainWindow",'Sending a request for the recipient\'s encryption key.'))))
self.requestPubKey(toaddress)
continue
ackdataForWhichImWatching[ackdata] = 0
@ -2992,7 +2992,7 @@ class singleWorker(threading.Thread):
fromStatus, fromAddressVersionNumber, fromStreamNumber, fromHash = decodeAddress(
fromaddress)
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, _translate("MainWindow", "Looking up the receiver\'s public key"))))
ackdata, translateText("MainWindow", "Looking up the receiver\'s public key"))))
shared.printLock.acquire()
print 'Found a message in our database that needs to be sent with this pubkey.'
print 'First 150 characters of message:', repr(message[:150])
@ -3055,7 +3055,7 @@ class singleWorker(threading.Thread):
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, _translate("MainWindow", "Doing work necessary to send message.\nThere is no required difficulty for version 2 addresses like this."))))
ackdata, translateText("MainWindow", "Doing work necessary to send message.\nThere is no required difficulty for version 2 addresses like this."))))
elif toAddressVersionNumber == 3:
requiredAverageProofOfWorkNonceTrialsPerByte, varintLength = decodeVarint(
pubkeyPayload[readPosition:readPosition + 10])
@ -3067,7 +3067,7 @@ class singleWorker(threading.Thread):
requiredAverageProofOfWorkNonceTrialsPerByte = shared.networkDefaultProofOfWorkNonceTrialsPerByte
if requiredPayloadLengthExtraBytes < shared.networkDefaultPayloadLengthExtraBytes:
requiredPayloadLengthExtraBytes = shared.networkDefaultPayloadLengthExtraBytes
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, _translate("MainWindow", "Doing work necessary to send message.\nReceiver\'s required difficulty: %1 and %2").arg(str(float(
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, translateText("MainWindow", "Doing work necessary to send message.\nReceiver\'s required difficulty: %1 and %2").arg(str(float(
requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte)).arg(str(float(requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes)))))
if status != 'forcepow':
if (requiredAverageProofOfWorkNonceTrialsPerByte > shared.config.getint('bitmessagesettings', 'maxacceptablenoncetrialsperbyte') and shared.config.getint('bitmessagesettings', 'maxacceptablenoncetrialsperbyte') != 0) or (requiredPayloadLengthExtraBytes > shared.config.getint('bitmessagesettings', 'maxacceptablepayloadlengthextrabytes') and shared.config.getint('bitmessagesettings', 'maxacceptablepayloadlengthextrabytes') != 0):
@ -3081,7 +3081,7 @@ class singleWorker(threading.Thread):
shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, _translate("MainWindow", "Problem: The work demanded by the recipient (%1 and %2) is more difficult than you are willing to do.").arg(str(float(requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte)).arg(str(float(
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, translateText("MainWindow", "Problem: The work demanded by the recipient (%1 and %2) is more difficult than you are willing to do.").arg(str(float(requiredAverageProofOfWorkNonceTrialsPerByte) / shared.networkDefaultProofOfWorkNonceTrialsPerByte)).arg(str(float(
requiredPayloadLengthExtraBytes) / shared.networkDefaultPayloadLengthExtraBytes)).arg(unicode(strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
continue
@ -3102,7 +3102,7 @@ class singleWorker(threading.Thread):
fromaddress, 'privencryptionkey')
except:
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, _translate("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
ackdata, translateText("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
continue
privSigningKeyHex = shared.decodeWalletImportFormat(
@ -3148,7 +3148,7 @@ class singleWorker(threading.Thread):
fromaddress, 'privencryptionkey')
except:
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (
ackdata, _translate("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
ackdata, translateText("MainWindow", "Error! Could not find sender address (your address) in the keys.dat file."))))
continue
privSigningKeyHex = shared.decodeWalletImportFormat(
@ -3205,7 +3205,7 @@ class singleWorker(threading.Thread):
queryreturn = shared.sqlReturnQueue.get()
shared.sqlSubmitQueue.put('commit')
shared.sqlLock.release()
shared.UISignalQueue.put(('updateSentItemStatusByAckdata',(ackdata,_translate("MainWindow",'Problem: The recipient\'s encryption key is no good. Could not encrypt message. %1').arg(unicode(strftime(shared.config.get('bitmessagesettings', 'timeformat'),localtime(int(time.time()))),'utf-8')))))
shared.UISignalQueue.put(('updateSentItemStatusByAckdata',(ackdata,translateText("MainWindow",'Problem: The recipient\'s encryption key is no good. Could not encrypt message. %1').arg(unicode(strftime(shared.config.get('bitmessagesettings', 'timeformat'),localtime(int(time.time()))),'utf-8')))))
continue
encryptedPayload = embeddedTime + encodeVarint(toStreamNumber) + encrypted
target = 2**64 / ((len(encryptedPayload)+requiredPayloadLengthExtraBytes+8) * requiredAverageProofOfWorkNonceTrialsPerByte)
@ -3228,7 +3228,7 @@ class singleWorker(threading.Thread):
objectType = 'msg'
shared.inventory[inventoryHash] = (
objectType, toStreamNumber, encryptedPayload, int(time.time()))
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, _translate("MainWindow", "Message sent. Waiting on acknowledgement. Sent on %1").arg(unicode(
shared.UISignalQueue.put(('updateSentItemStatusByAckdata', (ackdata, translateText("MainWindow", "Message sent. Waiting on acknowledgement. Sent on %1").arg(unicode(
strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
print 'Broadcasting inv for my msg(within sendmsg function):', inventoryHash.encode('hex')
shared.broadcastToSendDataQueues((
@ -3266,7 +3266,7 @@ class singleWorker(threading.Thread):
statusbar = 'Doing the computations necessary to request the recipient\'s public key.'
shared.UISignalQueue.put(('updateStatusBar', statusbar))
shared.UISignalQueue.put(('updateSentItemStatusByHash', (
ripe, _translate("MainWindow",'Doing work necessary to request encryption key.'))))
ripe, translateText("MainWindow",'Doing work necessary to request encryption key.'))))
target = 2 ** 64 / ((len(payload) + shared.networkDefaultPayloadLengthExtraBytes +
8) * shared.networkDefaultProofOfWorkNonceTrialsPerByte)
initialHash = hashlib.sha512(payload).digest()
@ -3294,8 +3294,8 @@ class singleWorker(threading.Thread):
shared.sqlLock.release()
shared.UISignalQueue.put((
'updateStatusBar', _translate("MainWindow",'Broacasting the public key request. This program will auto-retry if they are offline.')))
shared.UISignalQueue.put(('updateSentItemStatusByHash', (ripe, _translate("MainWindow",'Sending public key request. Waiting for reply. Requested at %1').arg(unicode(
'updateStatusBar', translateText("MainWindow",'Broacasting the public key request. This program will auto-retry if they are offline.')))
shared.UISignalQueue.put(('updateSentItemStatusByHash', (ripe, translateText("MainWindow",'Sending public key request. Waiting for reply. Requested at %1').arg(unicode(
strftime(shared.config.get('bitmessagesettings', 'timeformat'), localtime(int(time.time()))), 'utf-8')))))
def generateFullAckMessage(self, ackdata, toStreamNumber, embeddedTime):
@ -3947,7 +3947,7 @@ class singleAPI(threading.Thread):
se.register_introspection_functions()
se.serve_forever()
# This is used so that the _translate function can be used when we are in daemon mode and not using any QT functions.
# This is used so that the translateText function can be used when we are in daemon mode and not using any QT functions.
class translateClass:
def __init__(self, context, text):
self.context = context
@ -3958,6 +3958,24 @@ class translateClass:
else:
return self.text
def _translate(context, text):
return translateText(context, text)
def translateText(context, text):
if not shared.safeConfigGetBoolean('bitmessagesettings', 'daemon'):
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
os._exit(0)
return QtGui.QApplication.translate(context, text)
else:
if '%' in text:
return translateClass(context, text.replace('%','',1))
else:
return text
selfInitiatedConnections = {}
# This is a list of current connections (the thread pointers at least)
@ -4067,25 +4085,6 @@ if __name__ == "__main__":
while True:
time.sleep(20)
def _translate(context, text):
return translateText(context, text)
def translateText(context, text):
if not shared.safeConfigGetBoolean('bitmessagesettings', 'daemon'):
try:
from PyQt4 import QtCore, QtGui
except Exception as err:
print 'PyBitmessage requires PyQt unless you want to run it as a daemon and interact with it using the API. You can download PyQt from http://www.riverbankcomputing.com/software/pyqt/download or by searching Google for \'PyQt Download\'. If you want to run in daemon mode, see https://bitmessage.org/wiki/Daemon'
print 'Error message:', err
os._exit(0)
return QtGui.QApplication.translate(context, text)
else:
if '%' in text:
return translateClass(context, text.replace('%','',1))
else:
return text
# So far, the creation of and management of the Bitmessage protocol and this
# client is a one-man operation. Bitcoin tips are quite appreciated.
# 1H5XaDA6fYENLbknwZyjiYXYPQaFjjLX2u