Auto-updated language ja from transifex

master
PyBitmessage Translations 6 years ago
parent 34084bbc80
commit e55407ff4b
No known key found for this signature in database
GPG Key ID: 4D80CA5C8021C15A

Binary file not shown.

@ -58,12 +58,12 @@
<context>
<name>EmailGatewayRegistrationDialog</name>
<message>
<location filename="../bitmessageqt/__init__.py" line="2254"/>
<location filename="../bitmessageqt/__init__.py" line="2258"/>
<source>Registration failed:</source>
<translation>:</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2254"/>
<location filename="../bitmessageqt/__init__.py" line="2258"/>
<source>The requested email address is not available, please try a new one. Fill out the new desired email address (including @mailchuck.com) below:</source>
<translation> (@mailchuck.com ) :</translation>
</message>
@ -318,7 +318,7 @@ Please type the desired email address (including @mailchuck.com) below:</source>
<translation> %1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2123"/>
<location filename="../bitmessageqt/__init__.py" line="2127"/>
<source>Broadcast queued.</source>
<translation></translation>
</message>
@ -348,7 +348,7 @@ Please type the desired email address (including @mailchuck.com) below:</source>
<translation>: %1 %2</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1675"/>
<location filename="../bitmessageqt/__init__.py" line="1679"/>
<source>Not Connected</source>
<translation></translation>
</message>
@ -512,17 +512,17 @@ It is important that you back up this file. Would you like to open the file now?
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1708"/>
<location filename="../bitmessageqt/__init__.py" line="1712"/>
<source>Connected</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1825"/>
<location filename="../bitmessageqt/__init__.py" line="1829"/>
<source>Message trashed</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1909"/>
<location filename="../bitmessageqt/__init__.py" line="1913"/>
<source>The TTL, or Time-To-Live is the length of time that the network will hold the message.
The recipient must get it during this time. If your Bitmessage client does not hear an acknowledgement, it
will resend the message automatically. The longer the Time-To-Live, the
@ -533,17 +533,17 @@ It is important that you back up this file. Would you like to open the file now?
45 TTLTime-To-Live</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1947"/>
<location filename="../bitmessageqt/__init__.py" line="1951"/>
<source>Message too long</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1947"/>
<location filename="../bitmessageqt/__init__.py" line="1951"/>
<source>The message that you are trying to send is too long by %1 bytes. (The maximum is 261644 bytes). Please cut it down before sending.</source>
<translation> %1 (261644) </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1979"/>
<location filename="../bitmessageqt/__init__.py" line="1983"/>
<source>Error: Your account wasn&apos;t registered at an email gateway. Sending registration now as %1, please wait for the registration to be processed before retrying sending.</source>
<translation>: %1 </translation>
</message>
@ -588,67 +588,67 @@ It is important that you back up this file. Would you like to open the file now?
<translation type="unfinished"/>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2081"/>
<location filename="../bitmessageqt/__init__.py" line="2085"/>
<source>Error: You must specify a From address. If you don&apos;t have one, go to the &apos;Your Identities&apos; tab.</source>
<translation>: </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2022"/>
<location filename="../bitmessageqt/__init__.py" line="2026"/>
<source>Address version number</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2022"/>
<location filename="../bitmessageqt/__init__.py" line="2026"/>
<source>Concerning the address %1, Bitmessage cannot understand address version numbers of %2. Perhaps upgrade Bitmessage to the latest version.</source>
<translation> %1 %2 Bitmessage</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2026"/>
<location filename="../bitmessageqt/__init__.py" line="2030"/>
<source>Stream number</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2026"/>
<location filename="../bitmessageqt/__init__.py" line="2030"/>
<source>Concerning the address %1, Bitmessage cannot handle stream numbers of %2. Perhaps upgrade Bitmessage to the latest version.</source>
<translation> %1 %2 Bitmessage</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2031"/>
<location filename="../bitmessageqt/__init__.py" line="2035"/>
<source>Warning: You are currently not connected. Bitmessage will do the work necessary to send the message but it won&apos;t send until you connect.</source>
<translation>: Bitmessage</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2073"/>
<location filename="../bitmessageqt/__init__.py" line="2077"/>
<source>Message queued.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2077"/>
<location filename="../bitmessageqt/__init__.py" line="2081"/>
<source>Your &apos;To&apos; field is empty.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2132"/>
<location filename="../bitmessageqt/__init__.py" line="2136"/>
<source>Right click one or more entries in your address book and select &apos;Send message to this address&apos;.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2145"/>
<location filename="../bitmessageqt/__init__.py" line="2149"/>
<source>Fetched address from namecoin identity.</source>
<translation>namecoin ID</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2248"/>
<location filename="../bitmessageqt/__init__.py" line="2252"/>
<source>New Message</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2248"/>
<location filename="../bitmessageqt/__init__.py" line="2252"/>
<source>From </source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2627"/>
<location filename="../bitmessageqt/__init__.py" line="2631"/>
<source>Sending email gateway registration request</source>
<translation></translation>
</message>
@ -663,142 +663,142 @@ It is important that you back up this file. Would you like to open the file now?
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3066"/>
<location filename="../bitmessageqt/__init__.py" line="3070"/>
<source>Error: You cannot add the same address to your address book twice. Try renaming the existing one if you want.</source>
<translation>: </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3314"/>
<location filename="../bitmessageqt/__init__.py" line="3318"/>
<source>Error: You cannot add the same address to your subscriptions twice. Perhaps rename the existing one if you want.</source>
<translation>: 2 </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2388"/>
<location filename="../bitmessageqt/__init__.py" line="2392"/>
<source>Restart</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2374"/>
<location filename="../bitmessageqt/__init__.py" line="2378"/>
<source>You must restart Bitmessage for the port number change to take effect.</source>
<translation>Bitmessage</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2388"/>
<location filename="../bitmessageqt/__init__.py" line="2392"/>
<source>Bitmessage will use your proxy from now on but you may want to manually restart Bitmessage now to close existing connections (if any).</source>
<translation>Bitmessage</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2417"/>
<location filename="../bitmessageqt/__init__.py" line="2421"/>
<source>Number needed</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2417"/>
<location filename="../bitmessageqt/__init__.py" line="2421"/>
<source>Your maximum download and upload rate must be numbers. Ignoring what you typed.</source>
<translation> </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2496"/>
<location filename="../bitmessageqt/__init__.py" line="2500"/>
<source>Will not resend ever</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2496"/>
<location filename="../bitmessageqt/__init__.py" line="2500"/>
<source>Note that the time limit you entered is less than the amount of time Bitmessage waits for the first resend attempt therefore your messages will never be resent.</source>
<translation>Bitmessage</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2600"/>
<location filename="../bitmessageqt/__init__.py" line="2604"/>
<source>Sending email gateway unregistration request</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2604"/>
<location filename="../bitmessageqt/__init__.py" line="2608"/>
<source>Sending email gateway status request</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2704"/>
<location filename="../bitmessageqt/__init__.py" line="2708"/>
<source>Passphrase mismatch</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2704"/>
<location filename="../bitmessageqt/__init__.py" line="2708"/>
<source>The passphrase you entered twice doesn&apos;t match. Try again.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2707"/>
<location filename="../bitmessageqt/__init__.py" line="2711"/>
<source>Choose a passphrase</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2707"/>
<location filename="../bitmessageqt/__init__.py" line="2711"/>
<source>You really do need a passphrase.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3007"/>
<location filename="../bitmessageqt/__init__.py" line="3011"/>
<source>Address is gone</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3007"/>
<location filename="../bitmessageqt/__init__.py" line="3011"/>
<source>Bitmessage cannot find your address %1. Perhaps you removed it?</source>
<translation> %1 </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3010"/>
<location filename="../bitmessageqt/__init__.py" line="3014"/>
<source>Address disabled</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3010"/>
<location filename="../bitmessageqt/__init__.py" line="3014"/>
<source>Error: The address from which you are trying to send is disabled. You&apos;ll have to enable it on the &apos;Your Identities&apos; tab before using it.</source>
<translation>: 使</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3063"/>
<location filename="../bitmessageqt/__init__.py" line="3067"/>
<source>Entry added to the Address Book. Edit the label to your liking.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3088"/>
<location filename="../bitmessageqt/__init__.py" line="3092"/>
<source>Entry added to the blacklist. Edit the label to your liking.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3091"/>
<location filename="../bitmessageqt/__init__.py" line="3095"/>
<source>Error: You cannot add the same address to your blacklist twice. Try renaming the existing one if you want.</source>
<translation>: 2 </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3219"/>
<location filename="../bitmessageqt/__init__.py" line="3223"/>
<source>Moved items to trash.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3159"/>
<location filename="../bitmessageqt/__init__.py" line="3163"/>
<source>Undeleted item.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3187"/>
<location filename="../bitmessageqt/__init__.py" line="3191"/>
<source>Save As...</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3196"/>
<location filename="../bitmessageqt/__init__.py" line="3200"/>
<source>Write error.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3300"/>
<location filename="../bitmessageqt/__init__.py" line="3304"/>
<source>No addresses selected.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3346"/>
<location filename="../bitmessageqt/__init__.py" line="3350"/>
<source>If you delete the subscription, messages that you already received will become inaccessible. Maybe you can consider disabling the subscription instead. Disabled subscriptions will not receive new messages, but you can still view messages you already received.
Are you sure you want to delete the subscription?</source>
@ -807,7 +807,7 @@ Are you sure you want to delete the subscription?</source>
</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3576"/>
<location filename="../bitmessageqt/__init__.py" line="3580"/>
<source>If you delete the channel, messages that you already received will become inaccessible. Maybe you can consider disabling the channel instead. Disabled channels will not receive new messages, but you can still view messages you already received.
Are you sure you want to delete the channel?</source>
@ -816,92 +816,92 @@ Are you sure you want to delete the channel?</source>
</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3691"/>
<location filename="../bitmessageqt/__init__.py" line="3695"/>
<source>Do you really want to remove this avatar?</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="3699"/>
<location filename="../bitmessageqt/__init__.py" line="3703"/>
<source>You have already set an avatar for this address. Do you really want to overwrite it?</source>
<translation> </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4094"/>
<location filename="../bitmessageqt/__init__.py" line="4098"/>
<source>Start-on-login not yet supported on your OS.</source>
<translation>使OS</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4087"/>
<location filename="../bitmessageqt/__init__.py" line="4091"/>
<source>Minimize-to-tray not yet supported on your OS.</source>
<translation>使OS</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4090"/>
<location filename="../bitmessageqt/__init__.py" line="4094"/>
<source>Tray notifications not yet supported on your OS.</source>
<translation>使OS</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4265"/>
<location filename="../bitmessageqt/__init__.py" line="4269"/>
<source>Testing...</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4305"/>
<location filename="../bitmessageqt/__init__.py" line="4309"/>
<source>This is a chan address. You cannot use it as a pseudo-mailing list.</source>
<translation>chan使</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4365"/>
<location filename="../bitmessageqt/__init__.py" line="4369"/>
<source>The address should start with &apos;&apos;BM-&apos;&apos;</source>
<translation>BM-</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4368"/>
<location filename="../bitmessageqt/__init__.py" line="4372"/>
<source>The address is not typed or copied correctly (the checksum failed).</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4371"/>
<location filename="../bitmessageqt/__init__.py" line="4375"/>
<source>The version number of this address is higher than this software can support. Please upgrade Bitmessage.</source>
<translation>Bitmessage</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4374"/>
<location filename="../bitmessageqt/__init__.py" line="4378"/>
<source>The address contains invalid characters.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4377"/>
<location filename="../bitmessageqt/__init__.py" line="4381"/>
<source>Some data encoded in the address is too short.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4380"/>
<location filename="../bitmessageqt/__init__.py" line="4384"/>
<source>Some data encoded in the address is too long.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4383"/>
<location filename="../bitmessageqt/__init__.py" line="4387"/>
<source>Some data encoded in the address is malformed.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4357"/>
<location filename="../bitmessageqt/__init__.py" line="4361"/>
<source>Enter an address above.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4389"/>
<location filename="../bitmessageqt/__init__.py" line="4393"/>
<source>Address is an old type. We cannot display its past broadcasts.</source>
<translation> </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4398"/>
<location filename="../bitmessageqt/__init__.py" line="4402"/>
<source>There are no recent broadcasts from this address to display.</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4432"/>
<location filename="../bitmessageqt/__init__.py" line="4436"/>
<source>You are using TCP port %1. (This can be changed in the settings).</source>
<translation>使 %1 </translation>
</message>
@ -1111,47 +1111,47 @@ Are you sure you want to delete the channel?</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="4402"/>
<location filename="../bitmessageqt/__init__.py" line="4406"/>
<source>Display the %1 recent broadcast(s) from this address.</source>
<translation>%1</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1834"/>
<location filename="../bitmessageqt/__init__.py" line="1838"/>
<source>New version of PyBitmessage is available: %1. Download it from https://github.com/Bitmessage/PyBitmessage/releases/latest</source>
<translation> PyBitmessage : %1 https://github.com/Bitmessage/PyBitmessage/releases/latest からダウンロードしてください</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2800"/>
<location filename="../bitmessageqt/__init__.py" line="2804"/>
<source>Waiting for PoW to finish... %1%</source>
<translation>PoW... %1%</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2804"/>
<location filename="../bitmessageqt/__init__.py" line="2808"/>
<source>Shutting down Pybitmessage... %1%</source>
<translation>Pybitmessage... %1%</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2815"/>
<location filename="../bitmessageqt/__init__.py" line="2819"/>
<source>Waiting for objects to be sent... %1%</source>
<translation>... %1%</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2825"/>
<location filename="../bitmessageqt/__init__.py" line="2829"/>
<source>Saving settings... %1%</source>
<translation>... %1%</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2834"/>
<location filename="../bitmessageqt/__init__.py" line="2838"/>
<source>Shutting down core... %1%</source>
<translation>... %1%</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2837"/>
<location filename="../bitmessageqt/__init__.py" line="2841"/>
<source>Stopping notifications... %1%</source>
<translation>... %1%</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2843"/>
<location filename="../bitmessageqt/__init__.py" line="2847"/>
<source>Shutdown imminent... %1%</source>
<translation>... %1%</translation>
</message>
@ -1166,7 +1166,7 @@ Are you sure you want to delete the channel?</source>
<translation><numerusform>%n </numerusform></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2772"/>
<location filename="../bitmessageqt/__init__.py" line="2776"/>
<source>Shutting down PyBitmessage... %1%</source>
<translation>PyBitmessage... %1%</translation>
</message>
@ -1206,71 +1206,71 @@ Are you sure you want to delete the channel?</source>
<translation type="unfinished"/>
</message>
<message>
<location filename="../class_sqlThread.py" line="582"/>
<location filename="../class_sqlThread.py" line="584"/>
<source>Disk full</source>
<translation></translation>
</message>
<message>
<location filename="../class_sqlThread.py" line="582"/>
<location filename="../class_sqlThread.py" line="584"/>
<source>Alert: Your disk or data storage volume is full. Bitmessage will now exit.</source>
<translation>: Bitmessage</translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="732"/>
<location filename="../class_singleWorker.py" line="735"/>
<source>Error! Could not find sender address (your address) in the keys.dat file.</source>
<translation> keys.dat () </translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="477"/>
<location filename="../class_singleWorker.py" line="482"/>
<source>Doing work necessary to send broadcast...</source>
<translation>...</translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="501"/>
<location filename="../class_singleWorker.py" line="506"/>
<source>Broadcast sent on %1</source>
<translation> %1</translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="570"/>
<location filename="../class_singleWorker.py" line="575"/>
<source>Encryption key was requested earlier.</source>
<translation></translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="607"/>
<location filename="../class_singleWorker.py" line="612"/>
<source>Sending a request for the recipient&apos;s encryption key.</source>
<translation></translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="624"/>
<location filename="../class_singleWorker.py" line="627"/>
<source>Looking up the receiver&apos;s public key</source>
<translation></translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="658"/>
<location filename="../class_singleWorker.py" line="661"/>
<source>Problem: Destination is a mobile device who requests that the destination be included in the message but this is disallowed in your settings. %1</source>
<translation>: %1</translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="672"/>
<location filename="../class_singleWorker.py" line="675"/>
<source>Doing work necessary to send message.
There is no required difficulty for version 2 addresses like this.</source>
<translation>
2</translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="686"/>
<location filename="../class_singleWorker.py" line="689"/>
<source>Doing work necessary to send message.
Receiver&apos;s required difficulty: %1 and %2</source>
<translation>
: %1 %2</translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="695"/>
<location filename="../class_singleWorker.py" line="698"/>
<source>Problem: The work demanded by the recipient (%1 and %2) is more difficult than you are willing to do. %3</source>
<translation>: (%1 %2) %3</translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="707"/>
<location filename="../class_singleWorker.py" line="710"/>
<source>Problem: You are trying to send a message to yourself or a chan but your encryption key could not be found in the keys.dat file. Could not encrypt message. %1</source>
<translation>: keys.dat 1</translation>
</message>
@ -1280,7 +1280,7 @@ Receiver&apos;s required difficulty: %1 and %2</source>
<translation></translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="830"/>
<location filename="../class_singleWorker.py" line="833"/>
<source>Message sent. Waiting for acknowledgement. Sent on %1</source>
<translation> %1 </translation>
</message>
@ -1290,12 +1290,12 @@ Receiver&apos;s required difficulty: %1 and %2</source>
<translation></translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="952"/>
<location filename="../class_singleWorker.py" line="951"/>
<source>Broadcasting the public key request. This program will auto-retry if they are offline.</source>
<translation> </translation>
</message>
<message>
<location filename="../class_singleWorker.py" line="954"/>
<location filename="../class_singleWorker.py" line="953"/>
<source>Sending public key request. Waiting for reply. Requested at %1</source>
<translation> %1 </translation>
</message>
@ -1305,7 +1305,7 @@ Receiver&apos;s required difficulty: %1 and %2</source>
<translation>%1UPnP</translation>
</message>
<message>
<location filename="../upnp.py" line="248"/>
<location filename="../upnp.py" line="253"/>
<source>UPnP port mapping removed</source>
<translation>UPnP</translation>
</message>
@ -1315,7 +1315,7 @@ Receiver&apos;s required difficulty: %1 and %2</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2646"/>
<location filename="../bitmessageqt/__init__.py" line="2650"/>
<source>Are you sure you would like to mark all messages read?</source>
<translation></translation>
</message>
@ -1325,37 +1325,37 @@ Receiver&apos;s required difficulty: %1 and %2</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2739"/>
<location filename="../bitmessageqt/__init__.py" line="2743"/>
<source>Proof of work pending</source>
<translation>PoW</translation>
</message>
<message numerus="yes">
<location filename="../bitmessageqt/__init__.py" line="2739"/>
<location filename="../bitmessageqt/__init__.py" line="2743"/>
<source>%n object(s) pending proof of work</source>
<translation><numerusform>%n (PoW)</numerusform></translation>
</message>
<message numerus="yes">
<location filename="../bitmessageqt/__init__.py" line="2739"/>
<location filename="../bitmessageqt/__init__.py" line="2743"/>
<source>%n object(s) waiting to be distributed</source>
<translation><numerusform>%n </numerusform></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2739"/>
<location filename="../bitmessageqt/__init__.py" line="2743"/>
<source>Wait until these tasks finish?</source>
<translation></translation>
</message>
<message>
<location filename="../class_outgoingSynSender.py" line="221"/>
<location filename="../class_outgoingSynSender.py" line="214"/>
<source>Problem communicating with proxy: %1. Please check your network settings.</source>
<translation>: %1 </translation>
</message>
<message>
<location filename="../class_outgoingSynSender.py" line="250"/>
<location filename="../class_outgoingSynSender.py" line="243"/>
<source>SOCKS5 Authentication problem: %1. Please check your SOCKS5 settings.</source>
<translation>SOCKS5: %1 SOCKS5</translation>
</message>
<message>
<location filename="../class_receiveDataThread.py" line="172"/>
<location filename="../class_receiveDataThread.py" line="173"/>
<source>The time on your computer, %1, may be wrong. Please verify your settings.</source>
<translation>使 %1 </translation>
</message>
@ -1370,72 +1370,77 @@ Receiver&apos;s required difficulty: %1 and %2</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1992"/>
<location filename="../bitmessageqt/__init__.py" line="1674"/>
<source>Problems connecting? Try enabling UPnP in the Network Settings</source>
<translation>? UPnP</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1996"/>
<source>Error: Bitmessage addresses start with BM- Please check the recipient address %1</source>
<translation>: BitmessageBM- %1 </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1995"/>
<location filename="../bitmessageqt/__init__.py" line="1999"/>
<source>Error: The recipient address %1 is not typed or copied correctly. Please check it.</source>
<translation>: %1 </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="1998"/>
<location filename="../bitmessageqt/__init__.py" line="2002"/>
<source>Error: The recipient address %1 contains invalid characters. Please check it.</source>
<translation>: %1 </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2001"/>
<location filename="../bitmessageqt/__init__.py" line="2005"/>
<source>Error: The version of the recipient address %1 is too high. Either you need to upgrade your Bitmessage software or your acquaintance is being clever.</source>
<translation>: %1 Bitmessage</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2004"/>
<location filename="../bitmessageqt/__init__.py" line="2008"/>
<source>Error: Some data encoded in the recipient address %1 is too short. There might be something wrong with the software of your acquaintance.</source>
<translation>: %1 </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2007"/>
<location filename="../bitmessageqt/__init__.py" line="2011"/>
<source>Error: Some data encoded in the recipient address %1 is too long. There might be something wrong with the software of your acquaintance.</source>
<translation>: %1 </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2010"/>
<location filename="../bitmessageqt/__init__.py" line="2014"/>
<source>Error: Some data encoded in the recipient address %1 is malformed. There might be something wrong with the software of your acquaintance.</source>
<translation>: %1 </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2013"/>
<location filename="../bitmessageqt/__init__.py" line="2017"/>
<source>Error: Something is wrong with the recipient address %1.</source>
<translation>: %1 </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2750"/>
<location filename="../bitmessageqt/__init__.py" line="2754"/>
<source>Synchronisation pending</source>
<translation></translation>
</message>
<message numerus="yes">
<location filename="../bitmessageqt/__init__.py" line="2750"/>
<location filename="../bitmessageqt/__init__.py" line="2754"/>
<source>Bitmessage hasn&apos;t synchronised with the network, %n object(s) to be downloaded. If you quit now, it may cause delivery delays. Wait until the synchronisation finishes?</source>
<translation><numerusform>Bitmessage%n </numerusform></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2761"/>
<location filename="../bitmessageqt/__init__.py" line="2765"/>
<source>Not connected</source>
<translation></translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2761"/>
<location filename="../bitmessageqt/__init__.py" line="2765"/>
<source>Bitmessage isn&apos;t connected to the network. If you quit now, it may cause delivery delays. Wait until connected and the synchronisation finishes?</source>
<translation>Bitmessage </translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2776"/>
<location filename="../bitmessageqt/__init__.py" line="2780"/>
<source>Waiting for network connection...</source>
<translation>...</translation>
</message>
<message>
<location filename="../bitmessageqt/__init__.py" line="2784"/>
<location filename="../bitmessageqt/__init__.py" line="2788"/>
<source>Waiting for finishing synchronisation...</source>
<translation>...</translation>
</message>

Loading…
Cancel
Save