AddAddressDialog Add new entry Label Label Address Adres EmailGatewayDialog Email gateway Register on email gateway Account status at email gateway Change account settings at email gateway Unregister from email gateway Email gateway allows you to communicate with email users. Currently, only the Mailchuck email gateway (@mailchuck.com) is available. Desired email address (including @mailchuck.com): EmailGatewayRegistrationDialog Registration failed: The requested email address is not available, please try a new one. Fill out the new desired email address (including @mailchuck.com) below: Email gateway registration Email gateway allows you to communicate with email users. Currently, only the Mailchuck email gateway (@mailchuck.com) is available. Please type the desiged email address (including @mailchuck.com) below: Mailchuck # You can use this to configure your email gateway account # Uncomment the setting you want to use # Here are the options: # # pgp: server # The email gateway will create and maintain PGP keys for you and sign, verify, # encrypt and decrypt on your behalf. When you want to use PGP but are lazy, # use this. Requires subscription. # # pgp: local # The email gateway will not conduct PGP operations on your behalf. You can # either not use PGP at all, or use it locally. # # attachments: yes # Incoming attachments in the email will be uploaded to MEGA.nz, and you can # download them from there by following the link. Requires a subscription. # # attachments: no # Attachments will be ignored. # # archive: yes # Your incoming emails will be archived on the server. Use this if you need # help with debugging problems or you need a third party proof of emails. This # however means that the operator of the service will be able to read your # emails even after they have been delivered to you. # # archive: no # Incoming emails will be deleted from the server as soon as they are relayed # to you. # # masterpubkey_btc: BIP44 xpub key or electrum v1 public seed # offset_btc: integer (defaults to 0) # feeamount: number with up to 8 decimal places # feecurrency: BTC, XBT, USD, EUR or GBP # Use these if you want to charge people who send you emails. If this is on and # an unknown person sends you an email, they will be requested to pay the fee # specified. As this scheme uses deterministic public keys, you will receive # the money directly. To turn it off again, set "feeamount" to 0. Requires # subscription. MainWindow One of your addresses, %1, is an old version 1 address. Version 1 addresses are no longer supported. May we delete it now? Reply Reageer Add sender to your Address Book Move to Trash Verplaats naar Prullenbak View HTML code as formatted text Bekijk HTML als geformatteerde tekst Save message as... Bewaar bericht als Mark Unread Markeer Ongelezen New Nieuw Enable Inschakelen Disable Uitschakelen Copy address to clipboard Kopieer adres naar klembord Special address behavior... Send message to this address Stuur bericht naar dit adres Subscribe to this address Add New Address Nieuw adres toevoegen Delete Verwijder Copy destination address to clipboard Kopieer bestemmingsadres naar klembord Force send Forceer zenden Waiting for their encryption key. Will request it again soon. Encryption key request queued. Queued. In wachtrij. Message sent. Waiting for acknowledgement. Sent at %1 Bericht verzonden. Wachten op bevestiging. Verzonden op %1 Message sent. Sent at %1 Bericht verzonden. Verzonden op %1 Need to do work to send message. Work is queued. Acknowledgement of the message received %1 Bevestiging van het bericht ontvangen op %1 Broadcast queued. Broadcast on %1 Problem: The work demanded by the recipient is more difficult than you are willing to do. %1 Problem: The recipient's encryption key is no good. Could not encrypt message. %1 Forced difficulty override. Send should start soon. Unknown status: %1 %2 Status onbekend: %1 %2 Not Connected Niet Verbonden Show Bitmessage Toon Bitmessage Send Verzend Subscribe Abonneer Address Book Adresboek Quit Sluiten You may manage your keys by editing the keys.dat file stored in the same directory as this program. It is important that you back up this file. You may manage your keys by editing the keys.dat file stored in %1 It is important that you back up this file. Open keys.dat? keys.dat openen? You may manage your keys by editing the keys.dat file stored in the same directory as this program. It is important that you back up this file. Would you like to open the file now? (Be sure to close Bitmessage before making any changes.) You may manage your keys by editing the keys.dat file stored in %1 It is important that you back up this file. Would you like to open the file now? (Be sure to close Bitmessage before making any changes.) Delete trash? Prullenbak legen? Are you sure you want to delete all trashed messages? bad passphrase verkeerd wachtwoord You must type your passphrase. If you don't have one then this is not the form for you. Chan name needed You didn't enter a chan name. Address already present Could not add chan because it appears to already be one of your identities. Success Gelukt Successfully created chan. To let others join your chan, give them the chan name and this Bitmessage address: %1. This address also appears in 'Your Identities'. Address too new Adres te nieuw Although that Bitmessage address might be valid, its version number is too new for us to handle. Perhaps you need to upgrade Bitmessage. Address invalid Adres ongeldig That Bitmessage address is not valid. Dat Bitmessage adres is niet geldig. Address does not match chan name Although the Bitmessage address you entered was valid, it doesn't match the chan name. Successfully joined chan. Processed %1 person-to-person messages. Verwerkt %1 peer-to-peer-bericht(en). Processed %1 broadcast messages. Verwerkt %1 broadcast-bericht(en). Processed %1 public keys. Verwerkt %1 publieke sleutel(s). Total Connections: %1 Aantal Connecties: %1 Connection lost Verbinding verloren Connected Verbonden Message trashed Bericht weggegooit Error: Bitmessage addresses start with BM- Please check %1 Error: The address %1 is not typed or copied correctly. Please check it. Error: The address %1 contains invalid characters. Please check it. Error: The address version in %1 is too high. Either you need to upgrade your Bitmessage software or your acquaintance is being clever. Error: Some data encoded in the address %1 is too short. There might be something wrong with the software of your acquaintance. Error: Some data encoded in the address %1 is too long. There might be something wrong with the software of your acquaintance. Error: Something is wrong with the address %1. Error: You must specify a From address. If you don't have one, go to the 'Your Identities' tab. Address version number Adres versienummer Concerning the address %1, Bitmessage cannot understand address version numbers of %2. Perhaps upgrade Bitmessage to the latest version. Stream number Concerning the address %1, Bitmessage cannot handle stream numbers of %2. Perhaps upgrade Bitmessage to the latest version. Warning: You are currently not connected. Bitmessage will do the work necessary to send the message but it won't send until you connect. Your 'To' field is empty. Right click one or more entries in your address book and select 'Send message to this address'. Fetched address from namecoin identity. New Message Nieuw Bericht From Van Address is valid. Adres is geldig. The address you entered was invalid. Ignoring it. Het ingevoerd adres is ongeldig. Worden genegeerd. Error: You cannot add the same address to your address book twice. Try renaming the existing one if you want. Restart Herstarten You must restart Bitmessage for the port number change to take effect. Bitmessage will use your proxy from now on but you may want to manually restart Bitmessage now to close existing connections (if any). Passphrase mismatch The passphrase you entered twice doesn't match. Try again. Choose a passphrase You really do need a passphrase. All done. Closing user interface... Address is gone Bitmessage cannot find your address %1. Perhaps you removed it? Address disabled Error: The address from which you are trying to send is disabled. You'll have to enable it on the 'Your Identities' tab before using it. Entry added to the Address Book. Edit the label to your liking. Moved items to trash. Save As... Opslaan als... Write error. Schrijffout. No addresses selected. Geen adressen geselecteerd. Testing... Testen... This is a chan address. You cannot use it as a pseudo-mailing list. The address should start with ''BM-'' The address is not typed or copied correctly (the checksum failed). The version number of this address is higher than this software can support. Please upgrade Bitmessage. The address contains invalid characters. Some data encoded in the address is too short. Some data encoded in the address is too long. You are using TCP port %1. (This can be changed in the settings). Bitmessage Bitmessage Search Zoeken All Alle To Naar From Van Subject Onderwerp Message Bericht Received Ontvangen Inbox Postvak IN Load from Address book Laden uit adresboek Fetch Namecoin ID Ophalen Namecoin ID Message: Bericht: Subject: Onderwerp: To: Naar: From: Van: Status Status Sent Verzonden Address Adres Your Identities Uw identiteiten Add new Subscription Label Label Subscriptions Blacklist Zwarte lijst Connections Verbindingen Total connections: 0 Aantal Connecties: 0 Processed 0 person-to-person message. Verwerkt 0 peer-to-peer-bericht. Processed 0 public key. Verwerkt 0 broadcast-bericht. Processed 0 broadcast. Verwerkt 0 publieke sleutel. Network Status netwerkstatus File Bestand Settings Instellingen Help Help Import keys Importeer sleutels Manage keys Ctrl+Q Ctrl+Q F1 F1 About Over Regenerate deterministic addresses Delete all trashed messages Join / Create chan Set avatar... Bad address version number Slechte adres versienummer Your address version number must be a number: either 3 or 4. Your address version number must be either 3 or 4. Will not resend ever Note that the time limit you entered is less than the amount of time Bitmessage waits for the first resend attempt therefore your messages will never be resent. Do you really want to remove this avatar? You have already set an avatar for this address. Do you really want to overwrite it? Start-on-login not yet supported on your OS. Minimize-to-tray not yet supported on your OS. Tray notifications not yet supported on your OS. Enter an address above. Address is an old type. We cannot display its past broadcasts. There are no recent broadcasts from this address to display. Display the %1 recent broadcast from this address. Display the %1 recent broadcasts from this address. Reply to sender Reply to channel Add sender to your Blacklist Undelete Email gateway 1 hour %1 hours %1 days Channel The TTL, or Time-To-Live is the length of time that the network will hold the message. The recipient must get it during this time. If your Bitmessage client does not hear an acknowledgement, it will resend the message automatically. The longer the Time-To-Live, the more work your computer must do to send the message. A Time-To-Live of four or five days is often appropriate. Message too long The message that you are trying to send is too long by %1 bytes. (The maximum is 261644 bytes). Please cut it down before sending. Error: Your account wasn't registered at an email gateway. Sending registration now as %1, please wait for the registration to be processed before retrying sending. Error: Some data encoded in the address %1 is malformed. There might be something wrong with the software of your acquaintance. Message queued. Sending email gateway registration request Error: You cannot add the same address to your subscriptions twice. Perhaps rename the existing one if you want. Number needed Your maximum download and upload rate must be numbers. Ignoring what you typed. Sending email gateway unregistration request Sending email gateway status request Entry added to the blacklist. Edit the label to your liking. Error: You cannot add the same address to your blacklist twice. Try renaming the existing one if you want. Undeleted item. If you delete the subscription, messages that you already received will become inaccessible. Maybe you can consider disabling the subscription instead. Disabled subscriptions will not receive new messages, but you can still view messages you already received. Are you sure you want to delete the subscription? If you delete the channel, messages that you already received will become inaccessible. Maybe you can consider disabling the channel instead. Disabled channels will not receive new messages, but you can still view messages you already received. Are you sure you want to delete the channel? Some data encoded in the address is malformed. Identities New Identity Messages Address book Add Contact <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0//EN" "http://www.w3.org/TR/REC-html40/strict.dtd"> <html><head><meta name="qrichtext" content="1" /><style type="text/css"> p, li { white-space: pre-wrap; } </style></head><body style=" font-family:'Droid Sans'; font-size:9pt; font-weight:400; font-style:normal;"> </body></html> Send ordinary Message Send Message to your Subscribers TTL: X days Chans Add Chan Contact support All accounts Zoom level %1% NewAddressDialog Create new Address Nieuw adres aanmaken Here you may generate as many addresses as you like. Indeed, creating and abandoning addresses is encouraged. You may generate addresses by using either random numbers or by using a passphrase. If you use a passphrase, the address is called a "deterministic" address. The 'Random Number' option is selected by default but deterministic addresses have several pros and cons: <html><head/><body>Pros: You can recreate your addresses on any computer from memory. You need-not worry about backing up your keys.dat file as long as you can remember your passphrase. Cons: You must remember (or write down) your passphrase if you expect to be able to recreate your keys if they are lost. You must remember the address version number and the stream number along with your passphrase. If you choose a weak passphrase and someone on the Internet can brute-force it, they can read your messages and send messages as you.</body></html> Use a random number generator to make an address Gebruik een willekeurige nummer generator om een adres te maken Use a passpharase to make addresses Use yee passpharase to make arrddresses Spend several minutes of extra computing time to make the address(es) 1 or 2 characters shorter Make deterministic addresses Address version number: 3 Arrddress version number: 3 In addition to your passphrase, you must remember these numbers: Passphrase Wachtwoord Number of addresses to make based on your passphrase: Stream number: 1 Retype passphrase Randomly generate address Genereer willekeurig adres Label (not shown to anyone except you) Use the most available stream (best if this is the first of many addresses you will create) Use the same stream as an existing address (saves you some bandwidth and processing power) Use a passphrase to make addresses Address version number: 4 Adres versienummer: 4 NewSubscriptionDialog Add new entry Label Label Address Adres CheckBox SpecialAddressBehaviorDialog Special Address Behavior Behave as a normal address Behave as a pseudo-mailing-list address Mail received to a pseudo-mailing-list address will be automatically broadcast to subscribers (and thus will be public). Name of the pseudo-mailing-list: aboutDialog PyBitmessage PyBitmessage version ? Versie ? About Over <html><head/><body>Distributed under the MIT/X11 software license; see <a href="http://www.opensource.org/licenses/mit-license.php">http://www.opensource.org/licenses/mit-license.php</a></body></html> This is Beta software. <html><head/><body>Copyright Â© 2012-2014 Jonathan Warren Copyright Â© 2013-2014 The Bitmessage Developers</body></html> connectDialog Bitmessage Bitmessage Bitmessage won't connect to anyone until you let it. Connect now Let me configure special network settings first helpDialog Help Help <a href="http://Bitmessage.org/wiki/PyBitmessage_Help">http://Bitmessage.org/wiki/PyBitmessage_Help</a> <a href="http://Bitmessage.org/wiki/PyBitmessage_Help">http://Bitmessage.org/wiki/PyBitmessage_Help</a> As Bitmessage is a collaborative project, help can be found online in the Bitmessage Wiki: <a href="https://bitmessage.org/wiki/PyBitmessage_Help">https://bitmessage.org/wiki/PyBitmessage_Help</a> iconGlossaryDialog Icon Glossary You have no connections with other peers. You have made at least one connection to a peer using an outgoing connection but you have not yet received any incoming connections. Your firewall or home router probably isn't configured to foward incoming TCP connections to your computer. Bitmessage will work just fine but it would help the Bitmessage network if you allowed for incoming connections and will help you be a better-connected node. Yee have made least one connection to a peer pirate usin' outgoing connection but yee not yet received any incoming connections. Yee firewall, witches nest, or home router probably shant configured to foward incoming TCP connections to yee computer. Bitmessage be workin' just fine but it help fellow pirates if yee allowed for incoming connections and will help yee be a better-connected node matey. You are using TCP port ?. (This can be changed in the settings). You do have connections with other peers and your firewall is correctly configured. You have made at least one connection to a peer using an outgoing connection but you have not yet received any incoming connections. Your firewall or home router probably isn't configured to forward incoming TCP connections to your computer. Bitmessage will work just fine but it would help the Bitmessage network if you allowed for incoming connections and will help you be a better-connected node. networkstatus Total connections: Since startup: Processed 0 person-to-person messages. Processed 0 public keys. Processed 0 broadcasts. Inventory lookups per second: 0 Down: 0 KB/s Up: 0 KB/s Objects to be synced: Stream # Connections Verbindingen newChanDialog Dialog Create a new chan Join a chan Create a chan <html><head/><body>Enter a name for your chan. If you choose a sufficiently complex chan name (like a strong and unique passphrase) and none of your friends share it publicly then the chan will be secure and private. If you and someone else both create a chan with the same chan name then it is currently very likely that they will be the same chan.</body></html> Chan name: <html><head/><body>A chan exists when a group of people share the same decryption keys. The keys and bitmessage address used by a chan are generated from a human-friendly word or phrase (the chan name). To send a message to everyone in the chan, send a normal person-to-person message to the chan address.Chans are experimental and completely unmoderatable.</body></html> Chan bitmessage address: regenerateAddressesDialog Regenerate Existing Addresses Regenerate existing addresses Passphrase Wachtwoord Number of addresses to make based on your passphrase: Address version Number: Arrddress version Number: 3 3 Stream number: 1 1 Spend several minutes of extra computing time to make the address(es) 1 or 2 characters shorter You must check (or not check) this box just like you did (or didn't) when you made your addresses the first time. If you have previously made deterministic addresses but lost them due to an accident (like hard drive failure), you can regenerate them here. If you used the random number generator to make your addresses then this form will be of no use to you. Address version number: settingsDialog Settings Instellingen Start Bitmessage on user login Start Bitmessage bij user login Start Bitmessage in the tray (don't show main window) Minimize to tray Show notification when message received Run in Portable Mode In Portable Mode, messages and config files are stored in the same directory as the program rather than the normal application-data folder. This makes it convenient to run Bitmessage from a USB thumb drive. User Interface Gebruikersinterface Listening port Luisterpoort Listen for connections on port: Luister voor connecties op poort: Proxy server / Tor Proxy server / Tor Type: Type: none geen SOCKS4a SOCKS4a SOCKS5 SOCKS5 Server hostname: Server hostnaam: Port: Poort: Authentication Authenticatie Username: Gebruikersnaam: Pass: Wachtwoord: Network Settings Netwerkinstellingen When someone sends you a message, their computer must first complete some work. The difficulty of this work, by default, is 1. You may raise this default for new addresses you create by changing the values here. Any new addresses you create will require senders to meet the higher difficulty. There is one exception: if you add a friend or acquaintance to your address book, Bitmessage will automatically notify them when you next send a message that they need only complete the minimum amount of work: difficulty 1. Total difficulty: Small message difficulty: The 'Small message difficulty' mostly only affects the difficulty of sending small messages. Doubling this value makes it almost twice as difficult to send a small message but doesn't really affect large messages. The 'Total difficulty' affects the absolute amount of work the sender must complete. Doubling this value doubles the amount of work. Demanded difficulty Willingly include unencrypted destination address when sending to a mobile device Listen for incoming connections when using proxy Here you may set the maximum amount of work you are willing to do to send a message to another person. Setting these values to 0 means that any value is acceptable. Maximum acceptable total difficulty: Maximum acceptable small message difficulty: Max acceptable difficulty <html><head/><body>Bitmessage can utilize a different Bitcoin-based program called Namecoin to make addresses human-friendly. For example, instead of having to tell your friend your long Bitmessage address, you can simply tell him to send a message to test. (Getting your own Bitmessage address into Namecoin is still rather difficult).Bitmessage can use either namecoind directly or a running nmcontrol instance.</body></html> Host: Password: Wachtwoord Test Connect to: Namecoind NMControl Namecoin integration Use Identicons Interface Language Interface Taal System Settings system Pirate English en_pirate Other (set in keys.dat) other <html><head/><body>By default, if you send a message to someone and he is offline for more than two days, Bitmessage will send the message again after an additional two days. This will be continued with exponential backoff forever; messages will be resent after 5, 10, 20 days ect. until the receiver acknowledges them. Here you may change that behavior by having Bitmessage give up after a certain number of days or months.Leave these input fields blank for the default behavior. </body></html> Give up after Opgeven na and en days dagen months. maanden. Resends Expire Tray Close to tray Reply below Quote UPnP: Bandwidth limit Maximum download rate (kB/s): [0: unlimited] Maximum upload rate (kB/s): [0: unlimited] Hardware GPU acceleration (OpenCL)