Fixed typos in the useragent.rst

in index.rst README.md is splitted in two parts - References now in the
bottom of the page; protocol.rst is the separate file, referenced on top.

Closes: #1033

.gitmodules

@@ -1,3 +0,0 @@
-[submodule "packages/flatpak/shared-modules"]
-	path = packages/flatpak/shared-modules
-	url = https://github.com/flathub/shared-modules.git

docs/conf.py

@@ -19,7 +19,7 @@ import version  # noqa:E402
 # -- Project information -----------------------------------------------------
 
 project = u'PyBitmessage'
-copyright = u'2019, The Bitmessage Team'  # pylint: disable=redefined-builtin
+copyright = u'2019-2021, The Bitmessage Team'  # pylint: disable=redefined-builtin
 author = u'The Bitmessage Team'
 
 # The short X.Y version

docs/encrypted_payload.rst

@@ -0,0 +1,19 @@
++------------+-------------+-----------+--------------------------------------------+
+| Field Size | Description | Data type | Comments                                   |
++============+=============+===========+============================================+
+| 16         | IV          | uchar[]   | Initialization Vector used for AES-256-CBC |
++------------+-------------+-----------+--------------------------------------------+
+| 2          | Curve type  | uint16_t  | Elliptic Curve type 0x02CA (714)           |
++------------+-------------+-----------+--------------------------------------------+
+| 2          | X length    | uint16_t  | Length of X component of public key R      |
++------------+-------------+-----------+--------------------------------------------+
+| X length   | X           | uchar[]   | X component of public key R                |
++------------+-------------+-----------+--------------------------------------------+
+| 2          | Y length    | uint16_t  | Length of Y component of public key R      |
++------------+-------------+-----------+--------------------------------------------+
+| Y length   | Y           | uchar[]   | Y component of public key R                |
++------------+-------------+-----------+--------------------------------------------+
+| ?          | encrypted   | uchar[]   | Cipher text                                |
++------------+-------------+-----------+--------------------------------------------+
+| 32         | MAC         | uchar[]   | HMACSHA256 Message Authentication Code     |
++------------+-------------+-----------+--------------------------------------------+

docs/encryption.rst

@@ -0,0 +1,232 @@
+Encryption
+==========
+
+Bitmessage uses the Elliptic Curve Integrated Encryption Scheme
+`(ECIES) <http://en.wikipedia.org/wiki/Integrated_Encryption_Scheme>`_
+to encrypt the payload of the Message and Broadcast objects.
+
+The scheme uses Elliptic Curve Diffie-Hellman
+`(ECDH) <http://en.wikipedia.org/wiki/ECDH>`_ to generate a shared secret used
+to generate the encryption parameters for Advanced Encryption Standard with
+256bit key and Cipher-Block Chaining
+`(AES-256-CBC) <http://en.wikipedia.org/wiki/Advanced_Encryption_Standard>`_.
+The encrypted data will be padded to a 16 byte boundary in accordance to
+`PKCS7 <http://en.wikipedia.org/wiki/Cryptographic_Message_Syntax>`_. This
+means that the data is padded with N bytes of value N.
+
+The Key Derivation Function
+`(KDF) <http://en.wikipedia.org/wiki/Key_derivation_function>`_ used to
+generate the key material for AES is
+`SHA512 <http://en.wikipedia.org/wiki/Sha512>`_. The Message Authentication
+Code (MAC) scheme used is `HMACSHA256 <http://en.wikipedia.org/wiki/Hmac>`_.
+
+Format
+------
+
+(See also: :doc:`protocol`)
+
+.. include:: encrypted_payload.rst
+
+In order to reconstitute a usable (65 byte) public key (starting with 0x04),
+the X and Y components need to be expanded by prepending them with 0x00 bytes
+until the individual component lengths are 32 bytes.
+
+Encryption
+----------
+
+ 1. The destination public key is called K.
+ 2. Generate 16 random bytes using a secure random number generator.
+    Call them IV.
+ 3. Generate a new random EC key pair with private key called r and public key
+    called R.
+ 4. Do an EC point multiply with public key K and private key r. This gives you
+    public key P.
+ 5. Use the X component of public key P and calculate the SHA512 hash H.
+ 6. The first 32 bytes of H are called key_e and the last 32 bytes are called
+    key_m.
+ 7. Pad the input text to a multiple of 16 bytes, in accordance to PKCS7.
+ 8. Encrypt the data with AES-256-CBC, using IV as initialization vector,
+    key_e as encryption key and the padded input text as payload. Call the
+    output cipher text.
+ 9. Calculate a 32 byte MAC with HMACSHA256, using key_m as salt and
+    IV + R + cipher text as data. Call the output MAC.
+
+The resulting data is: IV + R + cipher text + MAC
+
+Decryption
+----------
+
+ 1. The private key used to decrypt is called k.
+ 2. Do an EC point multiply with private key k and public key R. This gives you
+    public key P.
+ 3. Use the X component of public key P and calculate the SHA512 hash H.
+ 4. The first 32 bytes of H are called key_e and the last 32 bytes are called
+    key_m.
+ 5. Calculate MAC' with HMACSHA256, using key_m as salt and
+    IV + R + cipher text as data.
+ 6. Compare MAC with MAC'. If not equal, decryption will fail.
+ 7. Decrypt the cipher text with AES-256-CBC, using IV as initialization
+    vector, key_e as decryption key and the cipher text as payload. The output
+    is the padded input text.
+
+.. highlight:: nasm
+
+Partial Example
+---------------
+
+.. list-table:: Public key K:
+   :header-rows: 1
+   :widths: auto
+
+   * - Data
+     - Comments
+   * -
+
+       ::
+
+          04 09 d4 e5  c0 ab 3d 25
+          fe 04 8c 64  c9 da 1a 24
+          2c 7f 19 41  7e 95 17 cd
+          26 69 50 d7  2c 75 57 13
+          58 5c 61 78  e9 7f e0 92
+          fc 89 7c 9a  1f 17 20 d5
+          77 0a e8 ea  ad 2f a8 fc
+          bd 08 e9 32  4a 5d de 18
+          57
+     - Public key, 0x04 prefix, then 32 bytes X and 32 bytes Y.
+
+
+.. list-table:: Initialization Vector IV:
+   :header-rows: 1
+   :widths: auto
+
+   * - Data
+     - Comments
+   * -
+
+       ::
+
+	  bd db 7c 28  29 b0 80 38
+	  75 30 84 a2  f3 99 16 81
+     - 16 bytes generated with a secure random number generator.
+
+.. list-table:: Randomly generated key pair with private key r and public key R:
+   :header-rows: 1
+   :widths: auto
+
+   * - Data
+     - Comments
+   * -
+
+       ::
+
+	  5b e6 fa cd  94 1b 76 e9
+	  d3 ea d0 30  29 fb db 6b
+	  6e 08 09 29  3f 7f b1 97
+	  d0 c5 1f 84  e9 6b 8b a4
+     - Private key r
+   * -
+
+       ::
+
+	  04 02 93 21  3d cf 13 88
+	  b6 1c 2a e5  cf 80 fe e6
+	  ff ff c0 49  a2 f9 fe 73
+	  65 fe 38 67  81 3c a8 12
+	  92 df 94 68  6c 6a fb 56
+	  5a c6 14 9b  15 3d 61 b3
+	  b2 87 ee 2c  7f 99 7c 14
+	  23 87 96 c1  2b 43 a3 86
+	  5a
+     - Public key R
+
+.. list-table:: Derived public key P (point multiply r with K):
+   :header-rows: 1
+   :widths: auto
+
+   * - Data
+     - Comments
+   * -
+
+       ::
+
+	  04 0d b8 e3  ad 8c 0c d7
+	  3f a2 b3 46  71 b7 b2 47
+	  72 9b 10 11  41 57 9d 19
+	  9e 0d c0 bd  02 4e ae fd
+	  89 ca c8 f5  28 dc 90 b6
+	  68 11 ab ac  51 7d 74 97
+	  be 52 92 93  12 29 be 0b
+	  74 3e 05 03  f4 43 c3 d2
+	  96
+     - Public key P
+   * -
+
+       ::
+
+	  0d b8 e3 ad  8c 0c d7 3f
+	  a2 b3 46 71  b7 b2 47 72
+	  9b 10 11 41  57 9d 19 9e
+	  0d c0 bd 02  4e ae fd 89
+     - X component of public key P
+
+.. list-table:: SHA512 of public key P X component (H):
+   :header-rows: 1
+   :widths: auto
+
+   * - Data
+     - Comments
+   * -
+
+       ::
+
+	  17 05 43 82  82 67 86 71
+	  05 26 3d 48  28 ef ff 82
+	  d9 d5 9c bf  08 74 3b 69
+	  6b cc 5d 69  fa 18 97 b4
+     - First 32 bytes of H called key_e
+   * -
+
+       ::
+
+	  f8 3f 1e 9c  c5 d6 b8 44
+	  8d 39 dc 6a  9d 5f 5b 7f
+	  46 0e 4a 78  e9 28 6e e8
+	  d9 1c e1 66  0a 53 ea cd
+     - Last 32 bytes of H called key_m
+
+.. list-table:: Padded input:
+   :header-rows: 1
+   :widths: auto
+
+   * - Data
+     - Comments
+   * -
+
+       ::
+
+	  54 68 65 20  71 75 69 63
+	  6b 20 62 72  6f 77 6e 20
+	  66 6f 78 20  6a 75 6d 70
+	  73 20 6f 76  65 72 20 74
+	  68 65 20 6c  61 7a 79 20
+	  64 6f 67 2e  04 04 04 04
+     - The quick brown fox jumps over the lazy dog.0x04,0x04,0x04,0x04
+
+.. list-table:: Cipher text:
+   :header-rows: 1
+   :widths: auto
+
+   * - Data
+     - Comments
+   * -
+
+       ::
+
+	  64 20 3d 5b  24 68 8e 25
+	  47 bb a3 45  fa 13 9a 5a
+	  1d 96 22 20  d4 d4 8a 0c
+	  f3 b1 57 2c  0d 95 b6 16
+	  43 a6 f9 a0  d7 5a f7 ea
+	  cc 1b d9 57  14 7b f7 23
+     - 3 blocks of 16 bytes of encrypted data.

docs/extended_encoding.rst

@@ -0,0 +1,55 @@
+Extended encoding
+=================
+
+Extended encoding is an attempt to create a standard for transmitting structured
+data. The goals are flexibility, wide platform support and extensibility. It is
+currently available in the v0.6 branch and can be enabled by holding "Shift"
+while clicking on Send. It is planned that v5 addresses will have to support
+this. It's a work in progress, the basic plain text message works but don't
+expect anthing else at this time.
+
+The data structure is in msgpack, then compressed with zlib. The top level is
+a key/value store, and the "" key (empty string) contains the value of the type
+of object, which can then have its individual format and standards.
+
+Text fields are encoded using UTF-8.
+
+Types
+-----
+
+You can find the implementations in the ``src/messagetypes`` directory of
+PyBitmessage. Each type has its own file which includes one class, and they are
+dynamically loaded on startup. It's planned that this will also contain
+initialisation, rendering and so on, so that developers can simply add a new
+object type by adding a single file in the messagetypes directory and not have
+to change any other part of the code.
+
+message
+^^^^^^^
+
+The replacement for the old messages. Mandatory keys are ``body`` and
+``subject``, others are currently not implemented and not mandatory. Proposed
+other keys:
+
+``parents``:
+   array of msgids referring to messages that logically precede it in a
+   conversation. Allows to create a threaded conversation view
+
+``files``:
+   array of files (which is a key/value pair):
+
+   ``name``:
+      file name, mandatory
+   ``data``:
+      the binary data of the file
+   ``type``:
+      MIME content type
+   ``disposition``:
+      MIME content disposition, possible values are "inline" and "attachment"
+
+vote
+^^^^
+
+Dummy code available in the repository. Supposed to serve voting in a chan
+(thumbs up/down) for decentralised moderation. Does not actually do anything at
+the moment and specification can change.

docs/index.rst

@@ -1,7 +1,17 @@
 .. mdinclude:: ../README.md
+   :end-line: 20
 
-Documentation
+Protocol documentation
--------------
+----------------------
+.. toctree::
+   :maxdepth: 2
+
+   protocol
+   encryption
+   pow
+
+Code documentation
+------------------
 .. toctree::
    :maxdepth: 3
 
@@ -21,3 +31,6 @@ Indices and tables
 * :ref:`genindex`
 * :ref:`modindex`
 * :ref:`search`
+
+.. mdinclude:: ../README.md
+   :start-line: 21

docs/pow.rst

@@ -0,0 +1,77 @@
+Proof of work
+=============
+
+This page describes Bitmessage's Proof of work ("POW") mechanism as it exists in
+Protocol Version 3. In this document, hash() means SHA512(). SHA512 was chosen
+as it is widely supported and so that Bitcoin POW hardware cannot trivially be
+used for Bitmessage POWs. The author acknowledges that they are essentially the
+same algorithm with a different key size.
+
+Both ``averageProofOfWorkNonceTrialsPerByte`` and ``payloadLengthExtraBytes``
+are set by the owner of a Bitmessage address. The default and minimum for each
+is 1000. (This is the same as difficulty 1. If the difficulty is 2, then this
+value is 2000). The purpose of ``payloadLengthExtraBytes`` is to add some extra
+weight to small messages.
+
+Do a POW
+--------
+
+Let us use a ``msg`` message as an example::
+
+   payload = embeddedTime + encodedObjectVersion + encodedStreamNumber + encrypted
+
+``payloadLength``
+   the length of payload, in bytes, + 8
+   (to account for the nonce which we will append later)
+``TTL``
+   the number of seconds in between now and the object expiresTime.
+
+.. include:: pow_formula.rst
+
+::
+
+   initialHash = hash(payload)
+
+start with ``trialValue = 99999999999999999999``
+
+also start with ``nonce = 0`` where nonce is 8 bytes in length and can be
+hashed as if it is a string.
+
+::
+
+   while trialValue > target:
+       nonce = nonce + 1
+       resultHash = hash(hash( nonce || initialHash ))
+       trialValue = the first 8 bytes of resultHash, converted to an integer
+
+When this loop finishes, you will have your 8 byte nonce value which you can
+prepend onto the front of the payload. The message is then ready to send.
+
+Check a POW
+-----------
+
+Let us assume that ``payload`` contains the payload for a msg message (the nonce
+down through the encrypted message data).
+
+``nonce``
+   the first 8 bytes of payload
+``dataToCheck``
+   the ninth byte of payload on down (thus it is everything except the nonce)
+
+::
+
+   initialHash = hash(dataToCheck)
+
+   resultHash = hash(hash( nonce || initialHash ))
+
+``POWValue``
+   the first eight bytes of resultHash converted to an integer
+``TTL``
+   the number of seconds in between now and the object ``expiresTime``.
+
+.. include:: pow_formula.rst
+
+If ``POWValue`` is less than or equal to ``target``, then the POW check passes.
+
+
+

docs/pow_formula.rst

@@ -0,0 +1,7 @@
+
+.. math::
+
+   target = \frac{2^{64}}{{\displaystyle
+   nonceTrialsPerByte (payloadLength + payloadLengthExtraBytes + \frac{
+   TTL (payloadLength + payloadLengthExtraBytes)}{2^{16}})
+   }}

docs/protocol.rst

@@ -0,0 +1,940 @@
+Protocol specification
+======================
+
+.. warning:: All objects sent on the network should support protocol v3
+	     starting on Sun, 16 Nov 2014 22:00:00 GMT.
+
+.. toctree::
+   :maxdepth: 2
+
+Common standards
+----------------
+
+Hashes
+^^^^^^
+
+Most of the time `SHA-512 <http://en.wikipedia.org/wiki/SHA-2>`_ hashes are
+used, however `RIPEMD-160 <http://en.wikipedia.org/wiki/RIPEMD>`_ is also used
+when creating an address.
+
+A double-round of SHA-512 is used for the Proof Of Work. Example of
+double-SHA-512 encoding of string "hello":
+
+.. highlight:: nasm
+
+::
+
+   hello
+   9b71d224bd62f3785d96d46ad3ea3d73319bfbc2890caadae2dff72519673ca72323c3d99ba5c11d7c7acc6e14b8c5da0c4663475c2e5c3adef46f73bcdec043(first round of sha-512)
+   0592a10584ffabf96539f3d780d776828c67da1ab5b169e9e8aed838aaecc9ed36d49ff1423c55f019e050c66c6324f53588be88894fef4dcffdb74b98e2b200(second round of sha-512)
+
+For Bitmessage addresses (RIPEMD-160) this would give:
+
+::
+
+   hello
+   9b71d224bd62f3785d96d46ad3ea3d73319bfbc2890caadae2dff72519673ca72323c3d99ba5c11d7c7acc6e14b8c5da0c4663475c2e5c3adef46f73bcdec043(first round is sha-512)
+   79a324faeebcbf9849f310545ed531556882487e (with ripemd-160)
+
+
+Common structures
+-----------------
+
+All integers are encoded in big endian. (This is different from Bitcoin).
+
+.. list-table:: Message structure
+   :header-rows: 1
+   :widths: auto
+
+   * - Field Size
+     - Description
+     - Data type
+     - Comments
+   * - 4
+     - magic
+     - uint32_t
+     - Magic value indicating message origin network, and used to seek to next
+       message when stream state is unknown
+   * - 12
+     - command
+     - char[12]
+     - ASCII string identifying the packet content, NULL padded (non-NULL
+       padding results in packet rejected)
+   * - 4
+     - length
+     - uint32_t
+     - Length of payload in number of bytes. Because of other restrictions,
+       there is no reason why this length would ever be larger than 1600003
+       bytes. Some clients include a sanity-check to avoid processing messages
+       which are larger than this.
+   * - 4
+     - checksum
+     - uint32_t
+     - First 4 bytes of sha512(payload)
+   * - ?
+     - message_payload
+     - uchar[]
+     - The actual data, a :ref:`message <msg-types>` or an object_.
+       Not to be confused with objectPayload.
+
+Known magic values:
+
++-------------+-------------------+
+| Magic value | Sent over wire as |
++=============+===================+
+| 0xE9BEB4D9  | E9 BE B4 D9       |
++-------------+-------------------+
+
+.. _varint:
+
+Variable length integer
+^^^^^^^^^^^^^^^^^^^^^^^
+
+Integer can be encoded depending on the represented value to save space.
+Variable length integers always precede an array/vector of a type of data that
+may vary in length. Varints MUST use the minimum possible number of bytes to
+encode a value. For example, the value 6 can be encoded with one byte therefore
+a varint that uses three bytes to encode the value 6 is malformed and the
+decoding task must be aborted.
+
++---------------+----------------+------------------------------------------+
+| Value         | Storage length | Format                                   |
++===============+================+==========================================+
+| < 0xfd        | 1              | uint8_t                                  |
++---------------+----------------+------------------------------------------+
+| <= 0xffff     | 3              | 0xfd followed by the integer as uint16_t |
++---------------+----------------+------------------------------------------+
+| <= 0xffffffff | 5              | 0xfe followed by the integer as uint32_t |
++---------------+----------------+------------------------------------------+
+| -             | 9              | 0xff followed by the integer as uint64_t |
++---------------+----------------+------------------------------------------+
+
+Variable length string
+^^^^^^^^^^^^^^^^^^^^^^
+
+Variable length string can be stored using a variable length integer followed by
+the string itself.
+
++------------+-------------+------------+----------------------------------+
+| Field Size | Description | Data type  | Comments                         |
++============+=============+============+==================================+
+| 1+         | length      | |var_int|  | Length of the string             |
++------------+-------------+------------+----------------------------------+
+| ?          | string      | char[]     | The string itself (can be empty) |
++------------+-------------+------------+----------------------------------+
+
+Variable length list of integers
+^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
+
+n integers can be stored using n+1 :ref:`variable length integers <varint>`
+where the first var_int equals n.
+
++------------+-------------+-----------+----------------------------+
+| Field Size | Description | Data type | Comments                   |
++============+=============+===========+============================+
+| 1+         | count       | |var_int| | Number of var_ints below   |
++------------+-------------+-----------+----------------------------+
+| 1+         |             | var_int   | The first value stored     |
++------------+-------------+-----------+----------------------------+
+| 1+         |             | var_int   | The second value stored... |
++------------+-------------+-----------+----------------------------+
+| 1+         |             | var_int   | etc...                     |
++------------+-------------+-----------+----------------------------+
+
+.. |var_int| replace:: :ref:`var_int <varint>`
+
+Network address
+^^^^^^^^^^^^^^^
+
+When a network address is needed somewhere, this structure is used. Network
+addresses are not prefixed with a timestamp or stream in the version_ message.
+
+.. list-table::
+   :header-rows: 1
+   :widths: auto
+
+   * - Field Size
+     - Description
+     - Data type
+     - Comments
+   * - 8
+     - time
+     - uint64
+     - the Time.
+   * - 4
+     - stream
+     - uint32
+     - Stream number for this node
+   * - 8
+     - services
+     - uint64_t
+     - same service(s) listed in version_
+   * - 16
+     - IPv6/4
+     - char[16]
+     - IPv6 address. IPv4 addresses are written into the message as a 16 byte
+       `IPv4-mapped IPv6 address <http://en.wikipedia.org/wiki/IPv6#IPv4-mapped_IPv6_addresses>`_
+       (12 bytes 00 00 00 00 00 00 00 00 00 00 FF FF, followed by the 4 bytes of
+       the IPv4 address).
+   * - 2
+     - port
+     - uint16_t
+     - port number
+
+Inventory Vectors
+^^^^^^^^^^^^^^^^^
+
+Inventory vectors are used for notifying other nodes about objects they have or
+data which is being requested. Two rounds of SHA-512 are used, resulting in a
+64 byte hash. Only the first 32 bytes are used; the later 32 bytes are ignored.
+
+Inventory vectors consist of the following data format:
+
++------------+-------------+-----------+--------------------+
+| Field Size | Description | Data type | Comments           |
++============+=============+===========+====================+
+| 32         | hash        | char[32]  | Hash of the object |
++------------+-------------+-----------+--------------------+
+
+Encrypted payload
+^^^^^^^^^^^^^^^^^
+
+Bitmessage uses `ECIES <https://en.wikipedia.org/wiki/Integrated_Encryption_Scheme>`_ to encrypt its messages. For more information see :doc:`encryption`
+
+.. include:: encrypted_payload.rst
+
+Unencrypted Message Data
+^^^^^^^^^^^^^^^^^^^^^^^^
+
+.. list-table::
+   :header-rows: 1
+   :widths: auto
+
+   * - Field Size
+     - Description
+     - Data type
+     - Comments
+   * - 1+
+     - msg_version
+     - var_int
+     - Message format version. **This field is not included after the
+       protocol v3 upgrade period**.
+   * - 1+
+     - address_version
+     - var_int
+     - Sender's address version number. This is needed in order to calculate
+       the sender's address to show in the UI, and also to allow for forwards
+       compatible changes to the public-key data included below.
+   * - 1+
+     - stream
+     - var_int
+     - Sender's stream number
+   * - 4
+     - behavior bitfield
+     - uint32_t
+     - A bitfield of optional behaviors and features that can be expected from
+       the node with this pubkey included in this msg message (the sender's
+       pubkey).
+   * - 64
+     - public signing key
+     - uchar[]
+     - The ECC public key used for signing (uncompressed format;
+       normally prepended with \x04)
+   * - 64
+     - public encryption key
+     - uchar[]
+     - The ECC public key used for encryption (uncompressed format;
+       normally prepended with \x04)
+   * - 1+
+     - nonce_trials_per_byte
+     - var_int
+     - Used to calculate the difficulty target of messages accepted by this
+       node. The higher this value, the more difficult the Proof of Work must
+       be before this individual will accept the message. This number is the
+       average number of nonce trials a node will have to perform to meet the
+       Proof of Work requirement. 1000 is the network minimum so any lower
+       values will be automatically raised to 1000. **This field is new and is
+       only included when the address_version >= 3**.
+   * - 1+
+     - extra_bytes
+     - var_int
+     - Used to calculate the difficulty target of messages accepted by this
+       node. The higher this value, the more difficult the Proof of Work must
+       be before this individual will accept the message. This number is added
+       to the data length to make sending small messages more difficult.
+       1000 is the network minimum so any lower values will be automatically
+       raised to 1000. **This field is new and is only included when the
+       address_version >= 3**.
+   * - 20
+     - destination ripe
+     - uchar[]
+     - The ripe hash of the public key of the receiver of the message
+   * - 1+
+     - encoding
+     - var_int
+     - :ref:`Message Encoding <msg-encodings>` type
+   * - 1+
+     - message_length
+     - var_int
+     - Message Length
+   * - message_length
+     - message
+     - uchar[]
+     - The message.
+   * - 1+
+     - ack_length
+     - var_int
+     - Length of the acknowledgement data
+   * - ack_length
+     - ack_data
+     - uchar[]
+     - The acknowledgement data to be transmitted. This takes the form of a
+       Bitmessage protocol message, like another msg message. The POW therein
+       must already be completed.
+   * - 1+
+     - sig_length
+     - var_int
+     - Length of the signature
+   * - sig_length
+     - signature
+     - uchar[]
+     - The ECDSA signature which covers the object header starting with the
+       time, appended with the data described in this table down to the
+       ack_data.
+
+.. _msg-encodings:
+
+Message Encodings
+"""""""""""""""""
+
+.. list-table::
+   :header-rows: 1
+   :widths: auto
+
+   * - Value
+     - Name
+     - Description
+   * - 0
+     - IGNORE
+     - Any data with this number may be ignored. The sending node might simply
+       be sharing its public key with you.
+   * - 1
+     - TRIVIAL
+     - UTF-8. No 'Subject' or 'Body' sections. Useful for simple strings
+       of data, like URIs or magnet links.
+   * - 2
+     - SIMPLE
+     - UTF-8. Uses 'Subject' and 'Body' sections. No MIME is used.
+       ::
+	  messageToTransmit = 'Subject:' + subject + '\n' + 'Body:' + message
+   * - 3
+     - EXTENDED
+     - See :doc:`extended_encoding`
+
+Further values for the message encodings can be decided upon by the community.
+Any MIME or MIME-like encoding format, should they be used, should make use of
+Bitmessage's 8-bit bytes. 
+
+.. _behavior-bitfield:
+
+Pubkey bitfield features
+""""""""""""""""""""""""
+
+.. list-table::
+   :header-rows: 1
+   :widths: auto
+
+   * - Bit
+     - Name
+     - Description
+   * - 0
+     - undefined
+     - The most significant bit at the beginning of the structure. Undefined
+   * - 1
+     - undefined
+     - The next most significant bit. Undefined
+   * - ...
+     - ...
+     - ...
+   * - 27
+     - onion_router
+     - (**Proposal**) Node can be used to onion-route messages. In theory any
+       node can onion route, but since it requires more resources, they may have
+       the functionality disabled. This field will be used to indicate that the
+       node is willing to do this.
+   * - 28
+     - forward_secrecy
+     - (**Proposal**) Receiving node supports a forward secrecy encryption
+       extension. The exact design is pending.
+   * - 29
+     - chat
+     - (**Proposal**) Address if for chatting rather than messaging.
+   * - 30
+     - include_destination
+     - (**Proposal**) Receiving node expects that the RIPE hash encoded in their
+       address preceedes the encrypted message data of msg messages bound for
+       them.
+
+       .. note:: since hardly anyone implements this, this will be redesigned as
+		 `simple recipient verification <https://github.com/Bitmessage/PyBitmessage/pull/808#issuecomment-170189856>`_
+   * - 31
+     - does_ack
+     - If true, the receiving node does send acknowledgements (rather than
+       dropping them).
+
+.. _msg-types:
+
+Message types
+-------------
+
+Undefined messages received on the wire must be ignored.
+
+version
+^^^^^^^
+
+When a node creates an outgoing connection, it will immediately advertise its
+version. The remote node will respond with its version. No futher communication
+is possible until both peers have exchanged their version.
+
+.. list-table:: Payload
+   :header-rows: 1
+   :widths: auto
+
+   * - Field Size
+     - Description
+     - Data type
+     - Comments
+   * - 4
+     - version
+     - int32_t
+     - Identifies protocol version being used by the node. Should equal 3.
+       Nodes should disconnect if the remote node's version is lower but
+       continue with the connection if it is higher.
+   * - 8
+     - services
+     - uint64_t
+     - bitfield of features to be enabled for this connection
+   * - 8
+     - timestamp
+     - int64_t
+     - standard UNIX timestamp in seconds
+   * - 26
+     - addr_recv
+     - net_addr
+     - The network address of the node receiving this message (not including the
+       time or stream number)
+   * - 26
+     - addr_from
+     - net_addr
+     - The network address of the node emitting this message (not including the
+       time or stream number and the ip itself is ignored by the receiver)
+   * - 8
+     - nonce
+     - uint64_t
+     - Random nonce used to detect connections to self.
+   * - 1+
+     - user_agent
+     - var_str
+     - :doc:`useragent` (0x00 if string is 0 bytes long). Sending nodes must not
+       include a user_agent longer than 5000 bytes.
+   * - 1+
+     - stream_numbers
+     - var_int_list
+     - The stream numbers that the emitting node is interested in. Sending nodes
+       must not include more than 160000 stream numbers.
+
+A "verack" packet shall be sent if the version packet was accepted. Once you
+have sent and received a verack messages with the remote node, send an addr
+message advertising up to 1000 peers of which you are aware, and one or more
+inv messages advertising all of the valid objects of which you are aware.
+
+.. list-table:: The following services are currently assigned
+   :header-rows: 1
+   :widths: auto
+
+   * - Value
+     - Name
+     - Description
+   * - 1
+     - NODE_NETWORK
+     - This is a normal network node.
+   * - 2
+     - NODE_SSL
+     - This node supports SSL/TLS in the current connect (python < 2.7.9 only
+       supports a SSL client, so in that case it would only have this on when
+       the connection is a client).
+   * - 3
+     - NODE_POW
+     - (**Proposal**) This node may do PoW on behalf of some its peers (PoW
+       offloading/delegating), but it doesn't have to. Clients may have to meet
+       additional requirements (e.g. TLS authentication)
+   * - 4
+     - NODE_DANDELION
+     - Node supports `dandelion <https://github.com/gfanti/bips/blob/master/bip-dandelion.mediawiki>`_
+
+verack
+^^^^^^
+
+The *verack* message is sent in reply to *version*. This message consists of
+only a :ref:`message header <Message structure>` with the command string
+"verack". The TCP timeout starts out at 20 seconds; after verack messages are
+exchanged, the timeout is raised to 10 minutes.
+
+If both sides announce that they support SSL, they MUST perform a SSL handshake
+immediately after they both send and receive verack. During this SSL handshake,
+the TCP client acts as a SSL client, and the TCP server acts as a SSL server.
+The current implementation (v0.5.4 or later) requires the AECDH-AES256-SHA
+cipher over TLSv1 protocol, and prefers the secp256k1 curve (but other curves
+may be accepted, depending on the version of python and OpenSSL used).
+
+addr
+^^^^
+
+Provide information on known nodes of the network. Non-advertised nodes should
+be forgotten after typically 3 hours
+
+Payload:
+
++------------+-------------+-----------+---------------------------------------+
+| Field Size | Description | Data type | Comments                              |
++============+=============+===========+=======================================+
+| 1+         | count       | |var_int| | Number of address entries (max: 1000) |
++------------+-------------+-----------+---------------------------------------+
+| 38         | addr_list   | net_addr  | Address of other nodes on the network.|
++------------+-------------+-----------+---------------------------------------+
+
+inv
+^^^
+
+Allows a node to advertise its knowledge of one or more objects. Payload
+(maximum payload length: 50000 items):
+
++------------+-------------+------------+-----------------------------+
+| Field Size | Description | Data type  | Comments                    |
++============+=============+============+=============================+
+| ?          | count       | |var_int|  | Number of inventory entries |
++------------+-------------+------------+-----------------------------+
+| 32x?       | inventory   | inv_vect[] | Inventory vectors           |
++------------+-------------+------------+-----------------------------+
+
+
+getdata
+^^^^^^^
+
+getdata is used in response to an inv message to retrieve the content of a
+specific object after filtering known elements.
+
+Payload (maximum payload length: 50000 entries):
+
++------------+-------------+------------+-----------------------------+
+| Field Size | Description | Data type  | Comments                    |
++============+=============+============+=============================+
+| ?          | count       | |var_int|  | Number of inventory entries |
++------------+-------------+------------+-----------------------------+
+| 32x?       | inventory   | inv_vect[] | Inventory vectors           |
++------------+-------------+------------+-----------------------------+
+
+
+object
+^^^^^^
+
+An object is a message which is shared throughout a stream. It is the only
+message which propagates; all others are only between two nodes. Objects have a
+type, like 'msg', or 'broadcast'. To be a valid object, the
+:doc:`pow` must be done. The maximum allowable length of an object
+(not to be confused with the ``objectPayload``) is |2^18| bytes.
+
+.. |2^18| replace:: 2\ :sup:`18`\
+
+.. list-table:: Message structure
+   :header-rows: 1
+   :widths: auto
+
+   * - Field Size
+     - Description
+     - Data type
+     - Comments
+   * - 8
+     - nonce
+     - uint64_t
+     - Random nonce used for the :doc:`pow`
+   * - 8
+     - expiresTime
+     - uint64_t
+     - The "end of life" time of this object (be aware, in version 2 of the
+       protocol this was the generation time). Objects shall be shared with
+       peers until its end-of-life time has been reached. The node should store
+       the inventory vector of that object for some extra period of time to
+       avoid reloading it from another node with a small time delay. The time
+       may be no further than 28 days + 3 hours in the future.
+   * - 4
+     - objectType
+     - uint32_t
+     - Four values are currently defined: 0-"getpubkey", 1-"pubkey", 2-"msg",
+       3-"broadcast". All other values are reserved. Nodes should relay objects
+       even if they use an undefined object type.
+   * - 1+
+     - version
+     - var_int
+     - The object's version. Note that msg objects won't contain a version
+       until Sun, 16 Nov 2014 22:00:00 GMT.
+   * - 1+
+     - stream number
+     - var_int
+     - The stream number in which this object may propagate
+   * - ?
+     - objectPayload
+     - uchar[]
+     - This field varies depending on the object type; see below.
+
+
+Object types
+------------
+
+Here are the payloads for various object types.
+
+getpubkey
+^^^^^^^^^
+
+When a node has the hash of a public key (from an address) but not the public
+key itself, it must send out a request for the public key.
+
+.. list-table::
+   :header-rows: 1
+   :widths: auto
+
+   * - Field Size
+     - Description
+     - Data type
+     - Comments
+   * - 20
+     - ripe
+     - uchar[]
+     - The ripemd hash of the public key. This field is only included when the
+       address version is <= 3.
+   * - 32
+     - tag
+     - uchar[]
+     - The tag derived from the address version, stream number, and ripe. This
+       field is only included when the address version is >= 4.
+
+pubkey
+^^^^^^
+
+A version 2 pubkey. This is still in use and supported by current clients but
+*new* v2 addresses are not generated by clients.
+
+.. list-table::
+   :header-rows: 1
+   :widths: auto
+
+   * - Field Size
+     - Description
+     - Data type
+     - Comments
+   * - 4
+     - |behavior_bitfield|
+     - uint32_t
+     - A bitfield of optional behaviors and features that can be expected from
+       the node receiving the message.
+   * - 64
+     - public signing key
+     - uchar[]
+     - The ECC public key used for signing (uncompressed format;
+       normally prepended with \x04 )
+   * - 64
+     - public encryption key
+     - uchar[]
+     - The ECC public key used for encryption (uncompressed format;
+       normally prepended with \x04 )
+
+.. list-table:: A version 3 pubkey
+   :header-rows: 1
+   :widths: auto
+
+   * - Field Size
+     - Description
+     - Data type
+     - Comments
+   * - 4
+     - |behavior_bitfield|
+     - uint32_t
+     - A bitfield of optional behaviors and features that can be expected from
+       the node receiving the message.
+   * - 64
+     - public signing key
+     - uchar[]
+     - The ECC public key used for signing (uncompressed format;
+       normally prepended with \x04 )
+   * - 64
+     - public encryption key
+     - uchar[]
+     - The ECC public key used for encryption (uncompressed format;
+       normally prepended with \x04 )
+   * - 1+
+     - nonce_trials_per_byte
+     - var_int
+     - Used to calculate the difficulty target of messages accepted by this
+       node. The higher this value, the more difficult the Proof of Work must
+       be before this individual will accept the message. This number is the
+       average number of nonce trials a node will have to perform to meet the
+       Proof of Work requirement. 1000 is the network minimum so any lower
+       values will be automatically raised to 1000.
+   * - 1+
+     - extra_bytes
+     - var_int
+     - Used to calculate the difficulty target of messages accepted by this
+       node. The higher this value, the more difficult the Proof of Work must
+       be before this individual will accept the message. This number is added
+       to the data length to make sending small messages more difficult.
+       1000 is the network minimum so any lower values will be automatically
+       raised to 1000.
+   * - 1+
+     - sig_length
+     - var_int
+     - Length of the signature
+   * - sig_length
+     - signature
+     - uchar[]
+     - The ECDSA signature which, as of protocol v3, covers the object
+       header starting with the time, appended with the data described in this
+       table down to the extra_bytes.
+
+.. list-table:: A version 4 pubkey
+   :header-rows: 1
+   :widths: auto
+
+   * - Field Size
+     - Description
+     - Data type
+     - Comments
+   * - 32
+     - tag
+     - uchar[]
+     - The tag, made up of bytes 32-64 of the double hash of the address data
+       (see example python code below)
+   * - ?
+     - encrypted
+     - uchar[]
+     - Encrypted pubkey data.
+
+When version 4 pubkeys are created, most of the data in the pubkey is encrypted.
+This is done in such a way that only someone who has the Bitmessage address
+which corresponds to a pubkey can decrypt and use that pubkey. This prevents
+people from gathering pubkeys sent around the network and using the data from
+them to create messages to be used in spam or in flooding attacks.
+
+In order to encrypt the pubkey data, a double SHA-512 hash is calculated from
+the address version number, stream number, and ripe hash of the Bitmessage
+address that the pubkey corresponds to. The first 32 bytes of this hash are used
+to create a public and private key pair with which to encrypt and decrypt the
+pubkey data, using the same algorithm as message encryption
+(see :doc:`encryption`). The remaining 32 bytes of this hash are added to the
+unencrypted part of the pubkey and used as a tag, as above. This allows nodes to
+determine which pubkey to decrypt when they wish to send a message.
+
+In PyBitmessage, the double hash of the address data is calculated using the
+python code below:
+
+.. code-block:: python
+
+    doubleHashOfAddressData = hashlib.sha512(hashlib.sha512(
+        encodeVarint(addressVersionNumber) + encodeVarint(streamNumber) + hash
+    ).digest()).digest()
+
+
+.. list-table:: Encrypted data in version 4 pubkeys:
+   :header-rows: 1
+   :widths: auto
+
+   * - Field Size
+     - Description
+     - Data type
+     - Comments
+   * - 4
+     - |behavior_bitfield|
+     - uint32_t
+     - A bitfield of optional behaviors and features that can be expected from
+       the node receiving the message.
+   * - 64
+     - public signing key
+     - uchar[]
+     - The ECC public key used for signing (uncompressed format;
+       normally prepended with \x04 )
+   * - 64
+     - public encryption key
+     - uchar[]
+     - The ECC public key used for encryption (uncompressed format;
+       normally prepended with \x04 )
+   * - 1+
+     - nonce_trials_per_byte
+     - var_int
+     - Used to calculate the difficulty target of messages accepted by this
+       node. The higher this value, the more difficult the Proof of Work must
+       be before this individual will accept the message. This number is the
+       average number of nonce trials a node will have to perform to meet the
+       Proof of Work requirement. 1000 is the network minimum so any lower
+       values will be automatically raised to 1000.
+   * - 1+
+     - extra_bytes
+     - var_int
+     - Used to calculate the difficulty target of messages accepted by this
+       node. The higher this value, the more difficult the Proof of Work must
+       be before this individual will accept the message. This number is added
+       to the data length to make sending small messages more difficult.
+       1000 is the network minimum so any lower values will be automatically
+       raised to 1000.
+   * - 1+
+     - sig_length
+     - var_int
+     - Length of the signature
+   * - sig_length
+     - signature
+     - uchar[]
+     - The ECDSA signature which covers everything from the object header
+       starting with the time, then appended with the decrypted data down to
+       the extra_bytes. This was changed in protocol v3.
+
+msg
+^^^
+
+Used for person-to-person messages. Note that msg objects won't contain a
+version in the object header until Sun, 16 Nov 2014 22:00:00 GMT.
+
+.. list-table::
+   :header-rows: 1
+   :widths: auto
+
+   * - Field Size
+     - Description
+     - Data type
+     - Comments
+   * - ?
+     - encrypted
+     - uchar[]
+     - Encrypted data. See `Encrypted payload`_.
+       See also `Unencrypted Message Data`_
+
+broadcast
+^^^^^^^^^
+
+Users who are subscribed to the sending address will see the message appear in
+their inbox. Broadcasts are version 4 or 5.
+
+Pubkey objects and v5 broadcast objects are encrypted the same way: The data
+encoded in the sender's Bitmessage address is hashed twice. The first 32 bytes
+of the resulting hash constitutes the "private" encryption key and the last
+32 bytes constitute a **tag** so that anyone listening can easily decide if
+this particular message is interesting. The sender calculates the public key
+from the private key and then encrypts the object with this public key. Thus
+anyone who knows the Bitmessage address of the sender of a broadcast or pubkey
+object can decrypt it.
+
+The version of broadcast objects was previously 2 or 3 but was changed to 4 or
+5 for protocol v3. Having a broadcast version of 5 indicates that a tag is used
+which, in turn, is used when the sender's address version is >=4.
+
+.. list-table::
+   :header-rows: 1
+   :widths: auto
+
+   * - Field Size
+     - Description
+     - Data type
+     - Comments
+   * - 32
+     - tag
+     - uchar[]
+     - The tag. This field is new and only included when the broadcast version
+       is >= 5. Changed in protocol v3
+   * - ?
+     - encrypted
+     - uchar[]
+     - Encrypted broadcast data. The keys are derived as described in the
+       paragraph above. See Encrypted payload for details about the encryption
+       algorithm itself.
+
+Unencrypted data format:
+
+.. list-table::
+   :header-rows: 1
+   :widths: auto
+
+   * - Field Size
+     - Description
+     - Data type
+     - Comments
+   * - 1+
+     - broadcast version
+     - var_int
+     - The version number of this broadcast protocol message which is equal
+       to 2 or 3. This is included here so that it can be signed. This is
+       no longer included in protocol v3
+   * - 1+
+     - address version
+     - var_int
+     - The sender's address version
+   * - 1+
+     - stream number
+     - var_int
+     - The sender's stream number
+   * - 4
+     - |behavior_bitfield|
+     - uint32_t
+     - A bitfield of optional behaviors and features that can be expected from
+       the owner of this pubkey.
+   * - 64
+     - public signing key
+     - uchar[]
+     - The ECC public key used for signing (uncompressed format;
+       normally prepended with \x04)
+   * - 64
+     - public encryption key
+     - uchar[]
+     - The ECC public key used for encryption (uncompressed format;
+       normally prepended with \x04)
+   * - 1+
+     - nonce_trials_per_byte
+     - var_int
+     - Used to calculate the difficulty target of messages accepted by this
+       node. The higher this value, the more difficult the Proof of Work must
+       be before this individual will accept the message. This number is the
+       average number of nonce trials a node will have to perform to meet the
+       Proof of Work requirement. 1000 is the network minimum so any lower
+       values will be automatically raised to 1000. This field is new and is
+       only included when the address_version >= 3.
+   * - 1+
+     - extra_bytes
+     - var_int
+     - Used to calculate the difficulty target of messages accepted by this
+       node. The higher this value, the more difficult the Proof of Work must
+       be before this individual will accept the message. This number is added
+       to the data length to make sending small messages more difficult.
+       1000 is the network minimum so any lower values will be automatically
+       raised to 1000. This field is new and is only included when the
+       address_version >= 3.
+   * - 1+
+     - encoding
+     - var_int
+     - The encoding type of the message
+   * - 1+
+     - messageLength
+     - var_int
+     - The message length in bytes
+   * - messageLength
+     - message
+     - uchar[]
+     - The message
+   * - 1+
+     - sig_length
+     - var_int
+     - Length of the signature
+   * - sig_length
+     - signature
+     - uchar[]
+     - The signature which did cover the unencrypted data from the broadcast
+       version down through the message. In protocol v3, it covers the
+       unencrypted object header starting with the time, all appended with
+       the decrypted data.
+
+.. |behavior_bitfield| replace:: :ref:`behavior bitfield <behavior-bitfield>`

docs/useragent.rst

@@ -0,0 +1,53 @@
+User Agent
+==========
+
+Bitmessage user agents are a modified browser user agent with more structure
+to aid parsers and provide some coherence. The user agent strings are arranged
+in a stack with the most underlying software listed first.
+
+Basic format::
+
+   /Name:Version/Name:Version/.../
+
+Example::
+
+   /PyBitmessage:0.2.2/Corporate Mail System:0.8/
+   /Surdo:5.64/surdo-qt:0.4/
+
+The version numbers are not defined to any strict format, although this guide
+recommends:
+
+ * Version numbers in the form of Major.Minor.Revision (2.6.41)
+ * Repository builds using a date in the format of YYYYMMDD (20110128)
+
+For git repository builds, implementations are free to use the git commitish.
+However the issue lies in that it is not immediately obvious without the
+repository which version preceeds another. For this reason, we lightly
+recommend dates in the format specified above, although this is by no means
+a requirement.
+
+Optional ``-r1``, ``-r2``, ... can be appended to user agent version numbers.
+This is another light recommendation, but not a requirement. Implementations
+are free to specify version numbers in whatever format needed insofar as it
+does not include ``(``, ``)``, ``:`` or ``/`` to interfere with the user agent
+syntax.
+
+An optional comments field after the version number is also allowed. Comments
+should be delimited by parenthesis ``(...)``. The contents of comments is
+entirely implementation defined although this document recommends the use of
+semi-colons ``;`` as a delimiter between pieces of information.
+
+Example::
+
+   /cBitmessage:0.2(iPad; U; CPU OS 3_2_1)/AndroidBuild:0.8/
+
+Reserved symbols are therefore: ``/ : ( )``
+
+They should not be misused beyond what is specified in this section.
+
+``/``
+   separates the code-stack
+``:``
+   specifies the implementation version of the particular stack
+``( and )``
+   delimits a comment which optionally separates data using ``;``

packages/flatpak/org.bitmessage.BaseApp.json

@@ -1,57 +0,0 @@
-{
- "id": "org.bitmessage.BaseApp",
- "branch": "19.08",
- "runtime": "org.freedesktop.Platform",
- "sdk": "org.freedesktop.Sdk",
- "runtime-version": "19.08",
- "separate-locales": false,
- "modules": [
-  "shared-modules/python2.7/python-2.7.json",
-  "shared-modules/qt4/qt4-4.8.7-minimal.json",
-  {
-    "name": "python-sip",
-    "sources": [
-      {
-        "type": "archive",
-        "url": "https://www.riverbankcomputing.com/static/Downloads/sip/4.19.25/sip-4.19.25.tar.gz",
-        "sha256": "b39d93e937647807bac23579edbff25fe46d16213f708370072574ab1f1b4211"
-      }
-    ],
-    "buildsystem": "simple",
-    "build-commands": [
-      "python configure.py --sip-module PyQt4.sip --no-dist-info",
-      "make",
-      "make install"
-    ]
-  },
-  {
-    "name": "python-qt4",
-    "sources": [
-      {
-        "type": "archive",
-        "url": "http://sourceforge.net/projects/pyqt/files/PyQt4/PyQt-4.12.3/PyQt4_gpl_x11-4.12.3.tar.gz",
-        "sha256": "a00f5abef240a7b5852b7924fa5fdf5174569525dc076cd368a566619e56d472"
-      }
-    ],
-    "buildsystem": "simple",
-    "build-commands": [
-      "python configure.py -w --confirm-license",
-      "make",
-      "make install"
-    ]
-  },
-  {
-    "name" : "PyBitmessage-dependencies",
-    "buildsystem" : "simple",
-    "build-options": {
-      "build-args": [
-        "--share=network"
-      ]
-    },
-    "build-commands": [
-      "pip --version",
-      "pip install setuptools msgpack"
-    ]
-  }
- ]
-}

packages/flatpak/org.bitmessage.PyBitmessage.json

@@ -1,48 +0,0 @@
-{
-    "app-id": "org.bitmessage.PyBitmessage",
-    "runtime": "org.freedesktop.Platform",
-    "runtime-version": "19.08",
-    "branch": "stable",
-    "sdk": "org.freedesktop.Sdk",
-    "base": "org.bitmessage.BaseApp",
-    "command": "pybitmessage",
-    "base-version":"stable",
-    "finish-args" : [
-      "--share=network",
-      "--socket=x11",
-      "--share=ipc",
-      "--filesystem=xdg-config/PyBitmessage:create"
-    ],
-    "modules": [
-      {
-        "name" : "PyBitmessage",
-        "buildsystem" : "simple",
-        "build-options": {
-          "build-args": [
-            "--share=network"
-          ]
-        },
-        "build-commands": [
-          "python --version",
-          "pwd",
-          "ls",
-          "python checkdeps.py",
-          "python setup.py install --prefix=/app --exec-prefix=/app",
-          "sed -i 's~/usr/bin/~/app/bin/~' /app/bin/pybitmessage",
-          "cat /app/bin/pybitmessage",
-          "mv /app/share/applications/pybitmessage.desktop /app/share/applications/org.bitmessage.PyBitmessage.desktop",
-          "sed -i 's~Icon=pybitmessage~Icon=org.bitmessage.PyBitmessage~' /app/share/applications/org.bitmessage.PyBitmessage.desktop",
-          "mv /app/share/icons/hicolor/scalable/apps/pybitmessage.svg /app/share/icons/hicolor/scalable/apps/org.bitmessage.PyBitmessage.svg",
-          "mv /app/share/icons/hicolor/24x24/apps/pybitmessage.png /app/share/icons/hicolor/24x24/apps/org.bitmessage.PyBitmessage.png",
-          "which pybitmessage"
-        ],
-        "sources" : [
-          {
-            "type" : "dir",
-            "path" : "../../"
-          }
-        ]
-      }
-    ]
-  }
-  

packages/flatpak/shared-modules

@@ -1 +0,0 @@
-Subproject commit fd4d38328ccb078b88ad4a891807e593ae8de806

src/bitmessagemain.py

@@ -208,8 +208,8 @@ class Main(object):
                 ' or by searching Google for \'PyQt Download\'.'
                 ' If you want to run in daemon mode, see '
                 'https://bitmessage.org/wiki/Daemon\n'
-                'You can also run PyBitmessage with'
+                'You can also try running PyBitmessage with'
-                ' the new curses interface by providing'
+                ' unmaintained curses interface by providing'
                 ' \'-c\' as a commandline argument.'
             )
         # is the application already running?  If yes then exit.

src/bmconfigparser.py

@@ -2,22 +2,13 @@
 BMConfigParser class definition and default configuration settings
 """
 
-import sys
+import ConfigParser
-if sys.version_info[0] == 3:
-    # python 3
-    import configparser as ConfigParser
-    SafeConfigParser = ConfigParser.ConfigParser
-else:
-    # python 2
-    import ConfigParser
-    SafeConfigParser = ConfigParser.SafeConfigParser
-
-import state
-from singleton import Singleton
 import os
 import shutil
 from datetime import datetime
 
+import state
+from singleton import Singleton
 
 BMConfigDefaults = {
     "bitmessagesettings": {
@@ -52,8 +43,7 @@ BMConfigDefaults = {
 
 
 @Singleton
-class BMConfigParser(SafeConfigParser):
+class BMConfigParser(ConfigParser.SafeConfigParser):
-
     """
     Singleton class inherited from :class:`ConfigParser.SafeConfigParser`
     with additional methods specific to bitmessage config.
@@ -70,42 +60,21 @@ class BMConfigParser(SafeConfigParser):
             raise ValueError("Invalid value %s" % value)
         return ConfigParser.ConfigParser.set(self, section, option, value)
 
-    def get(self, section, option, raw=False, vars=None):
+    def get(self, section, option, raw=False, variables=None):
-        if sys.version_info[0] == 3:
         # pylint: disable=arguments-differ
         try:
             if section == "bitmessagesettings" and option == "timeformat":
                 return ConfigParser.ConfigParser.get(
-                        self, section, option)
+                    self, section, option, raw, variables)
             try:
                 return self._temp[section][option]
             except KeyError:
                 pass
             return ConfigParser.ConfigParser.get(
-                    self, section, option)
+                self, section, option, True, variables)
         except ConfigParser.InterpolationError:
             return ConfigParser.ConfigParser.get(
-                    self, section, option)
+                self, section, option, True, variables)
-           except (ConfigParser.NoSectionError, ConfigParser.NoOptionError) as e:
-                try:
-                    return BMConfigDefaults[section][option]
-                except (KeyError, ValueError, AttributeError):
-                    raise e
-        else:
-            # pylint: disable=arguments-differ
-            try:
-                if section == "bitmessagesettings" and option == "timeformat":
-                    return ConfigParser.ConfigParser.get(
-                        self, section, option, raw, vars)
-                try:
-                    return self._temp[section][option]
-                except KeyError:
-                    pass
-                return ConfigParser.ConfigParser.get(
-                    self, section, option, True, vars)
-            except ConfigParser.InterpolationError:
-                return ConfigParser.ConfigParser.get(
-                    self, section, option, True, vars)
         except (ConfigParser.NoSectionError, ConfigParser.NoOptionError) as e:
             try:
                 return BMConfigDefaults[section][option]
@@ -222,4 +191,3 @@ class BMConfigParser(SafeConfigParser):
         if value < 0 or value > 8:
             return False
         return True
-

src/tests/test_config.py

@@ -2,7 +2,11 @@
 Various tests for config
 """
 
+import os
 import unittest
+import tempfile
+
+from .test_process import TestProcessProto
 from pybitmessage.bmconfigparser import BMConfigParser
 
 
@@ -34,3 +38,32 @@ class TestConfig(unittest.TestCase):
             BMConfigParser().safeGetInt('nonexistent', 'nonexistent'), 0)
         self.assertEqual(
             BMConfigParser().safeGetInt('nonexistent', 'nonexistent', 42), 42)
+
+
+class TestProcessConfig(TestProcessProto):
+    """A test case for keys.dat"""
+    home = tempfile.mkdtemp()
+
+    def test_config_defaults(self):
+        """Test settings in the generated config"""
+        self._stop_process()
+        self._kill_process()
+        config = BMConfigParser()
+        config.read(os.path.join(self.home, 'keys.dat'))
+
+        self.assertEqual(config.safeGetInt(
+            'bitmessagesettings', 'settingsversion'), 10)
+        self.assertEqual(config.safeGetInt(
+            'bitmessagesettings', 'port'), 8444)
+        # don't connect
+        self.assertTrue(config.safeGetBoolean(
+            'bitmessagesettings', 'dontconnect'))
+        # API disabled
+        self.assertFalse(config.safeGetBoolean(
+            'bitmessagesettings', 'apienabled'))
+
+        # extralowdifficulty is false
+        self.assertEqual(config.safeGetInt(
+            'bitmessagesettings', 'defaultnoncetrialsperbyte'), 1000)
+        self.assertEqual(config.safeGetInt(
+            'bitmessagesettings', 'defaultpayloadlengthextrabytes'), 1000)

src/tests/test_config_process.py

@@ -1,38 +0,0 @@
-"""
-Various tests for config
-"""
-
-import os
-import tempfile
-from pybitmessage.bmconfigparser import BMConfigParser
-from .test_process import TestProcessProto
-
-
-class TestProcessConfig(TestProcessProto):
-    """A test case for keys.dat"""
-    home = tempfile.mkdtemp()
-
-
-    def test_config_defaults(self):
-        """Test settings in the generated config"""
-        config = BMConfigParser()
-        self._stop_process()
-        self._kill_process()
-        config.read(os.path.join(self.home, 'keys.dat'))
-
-        self.assertEqual(config.safeGetInt(
-            'bitmessagesettings', 'settingsversion'), 10)
-        self.assertEqual(config.safeGetInt(
-            'bitmessagesettings', 'port'), 8444)
-        # don't connect
-        self.assertTrue(config.safeGetBoolean(
-            'bitmessagesettings', 'dontconnect'))
-        # API disabled
-        self.assertFalse(config.safeGetBoolean(
-            'bitmessagesettings', 'apienabled'))
-
-        # extralowdifficulty is false
-        self.assertEqual(config.safeGetInt(
-            'bitmessagesettings', 'defaultnoncetrialsperbyte'), 1000)
-        self.assertEqual(config.safeGetInt(
-            'bitmessagesettings', 'defaultpayloadlengthextrabytes'), 1000)