Merge pull request #1363 from coffeedogs/final_code_quality_5

Changes based on style and lint checks. (final_code_quality_5)
This commit is contained in:
coffeedogs 2018-10-31 14:11:21 +00:00 committed by GitHub
commit 7a53da73ff
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
5 changed files with 516 additions and 273 deletions

View File

@ -1,3 +1,8 @@
"""
src/defaults.py
===============
"""
# sanity check, prevent doing ridiculous PoW # sanity check, prevent doing ridiculous PoW
# 20 million PoWs equals approximately 2 days on dev's dual R9 290 # 20 million PoWs equals approximately 2 days on dev's dual R9 290
ridiculousDifficulty = 20000000 ridiculousDifficulty = 20000000
@ -7,7 +12,13 @@ ridiculousDifficulty = 20000000
# namecoin integration to "namecoind". # namecoin integration to "namecoind".
namecoinDefaultRpcPort = "8336" namecoinDefaultRpcPort = "8336"
#If changed, these values will cause particularly unexpected behavior: You won't be able to either send or receive messages because the proof of work you do (or demand) won't match that done or demanded by others. Don't change them! # If changed, these values will cause particularly unexpected behavior:
networkDefaultProofOfWorkNonceTrialsPerByte = 1000 #The amount of work that should be performed (and demanded) per byte of the payload. # You won't be able to either send or receive messages because the proof
networkDefaultPayloadLengthExtraBytes = 1000 #To make sending short messages a little more difficult, this value is added to the payload length for use in calculating the proof of work target. # of work you do (or demand) won't match that done or demanded by others.
# Don't change them!
# The amount of work that should be performed (and demanded) per byte of the payload.
networkDefaultProofOfWorkNonceTrialsPerByte = 1000
# To make sending short messages a little more difficult, this value is
# added to the payload length for use in calculating the proof of work
# target.
networkDefaultPayloadLengthExtraBytes = 1000

View File

@ -1,6 +1,11 @@
# -*- Mode: Python -*- # -*- Mode: Python -*-
# Id: asyncore.py,v 2.51 2000/09/07 22:29:26 rushing Exp # Id: asyncore.py,v 2.51 2000/09/07 22:29:26 rushing Exp
# Author: Sam Rushing <rushing@nightmare.com> # Author: Sam Rushing <rushing@nightmare.com>
# pylint: disable=too-many-statements,too-many-branches,no-self-use,too-many-lines,attribute-defined-outside-init
# pylint: disable=global-statement
"""
src/network/asyncore_pollchoose.py
==================================
# ====================================================================== # ======================================================================
# Copyright 1996 by Sam Rushing # Copyright 1996 by Sam Rushing
@ -25,7 +30,7 @@
# CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. # CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
# ====================================================================== # ======================================================================
"""Basic infrastructure for asynchronous socket service clients and servers. Basic infrastructure for asynchronous socket service clients and servers.
There are only two ways to have a program on a single processor do "more There are only two ways to have a program on a single processor do "more
than one thing at a time". Multi-threaded programming is the simplest and than one thing at a time". Multi-threaded programming is the simplest and
@ -46,22 +51,20 @@ many of the difficult problems for you, making the task of building
sophisticated high-performance network servers and clients a snap. sophisticated high-performance network servers and clients a snap.
""" """
# randomise object order for bandwidth balancing import os
import random
import select import select
import socket import socket
import sys import sys
import time import time
from threading import current_thread
import warnings import warnings
from errno import (
EADDRINUSE, EAGAIN, EALREADY, EBADF, ECONNABORTED, ECONNREFUSED, ECONNRESET, EHOSTUNREACH, EINPROGRESS, EINTR,
EINVAL, EISCONN, ENETUNREACH, ENOTCONN, ENOTSOCK, EPIPE, ESHUTDOWN, ETIMEDOUT, EWOULDBLOCK, errorcode
)
from threading import current_thread
import os
import helper_random import helper_random
from errno import EALREADY, EINPROGRESS, EWOULDBLOCK, ECONNRESET, EINVAL, \
ENOTCONN, ESHUTDOWN, EISCONN, EBADF, ECONNABORTED, EPIPE, EAGAIN, \
ECONNREFUSED, EHOSTUNREACH, ENETUNREACH, ENOTSOCK, EINTR, ETIMEDOUT, \
EADDRINUSE, \
errorcode
try: try:
from errno import WSAEWOULDBLOCK from errno import WSAEWOULDBLOCK
except (ImportError, AttributeError): except (ImportError, AttributeError):
@ -75,13 +78,15 @@ try:
except (ImportError, AttributeError): except (ImportError, AttributeError):
WSAECONNRESET = ECONNRESET WSAECONNRESET = ECONNRESET
try: try:
from errno import WSAEADDRINUSE # Desirable side-effects on Windows; imports winsock error numbers
from errno import WSAEADDRINUSE # pylint: disable=unused-import
except (ImportError, AttributeError): except (ImportError, AttributeError):
WSAEADDRINUSE = EADDRINUSE WSAEADDRINUSE = EADDRINUSE
_DISCONNECTED = frozenset((ECONNRESET, ENOTCONN, ESHUTDOWN, ECONNABORTED, EPIPE,
EBADF, ECONNREFUSED, EHOSTUNREACH, ENETUNREACH, ETIMEDOUT, _DISCONNECTED = frozenset((
WSAECONNRESET)) ECONNRESET, ENOTCONN, ESHUTDOWN, ECONNABORTED, EPIPE, EBADF, ECONNREFUSED,
EHOSTUNREACH, ENETUNREACH, ETIMEDOUT, WSAECONNRESET))
OP_READ = 1 OP_READ = 1
OP_WRITE = 2 OP_WRITE = 2
@ -91,17 +96,21 @@ try:
except NameError: except NameError:
socket_map = {} socket_map = {}
def _strerror(err): def _strerror(err):
try: try:
return os.strerror(err) return os.strerror(err)
except (ValueError, OverflowError, NameError): except (ValueError, OverflowError, NameError):
if err in errorcode: if err in errorcode:
return errorcode[err] return errorcode[err]
return "Unknown error %s" %err return "Unknown error %s" % err
class ExitNow(Exception): class ExitNow(Exception):
"""We don't use directly but may be necessary as we replace asyncore due to some library raising or expecting it"""
pass pass
_reraised_exceptions = (ExitNow, KeyboardInterrupt, SystemExit) _reraised_exceptions = (ExitNow, KeyboardInterrupt, SystemExit)
maxDownloadRate = 0 maxDownloadRate = 0
@ -113,28 +122,38 @@ uploadTimestamp = 0
uploadBucket = 0 uploadBucket = 0
sentBytes = 0 sentBytes = 0
def read(obj): def read(obj):
"""Event to read from the object, i.e. its network socket."""
if not can_receive(): if not can_receive():
return return
try: try:
obj.handle_read_event() obj.handle_read_event()
except _reraised_exceptions: except _reraised_exceptions:
raise raise
except: except BaseException:
obj.handle_error() obj.handle_error()
def write(obj): def write(obj):
"""Event to write to the object, i.e. its network socket."""
if not can_send(): if not can_send():
return return
try: try:
obj.handle_write_event() obj.handle_write_event()
except _reraised_exceptions: except _reraised_exceptions:
raise raise
except: except BaseException:
obj.handle_error() obj.handle_error()
def set_rates(download, upload): def set_rates(download, upload):
"""Set throttling rates"""
global maxDownloadRate, maxUploadRate, downloadBucket, uploadBucket, downloadTimestamp, uploadTimestamp global maxDownloadRate, maxUploadRate, downloadBucket, uploadBucket, downloadTimestamp, uploadTimestamp
maxDownloadRate = float(download) * 1024 maxDownloadRate = float(download) * 1024
maxUploadRate = float(upload) * 1024 maxUploadRate = float(upload) * 1024
downloadBucket = maxDownloadRate downloadBucket = maxDownloadRate
@ -142,14 +161,24 @@ def set_rates(download, upload):
downloadTimestamp = time.time() downloadTimestamp = time.time()
uploadTimestamp = time.time() uploadTimestamp = time.time()
def can_receive(): def can_receive():
"""Predicate indicating whether the download throttle is in effect"""
return maxDownloadRate == 0 or downloadBucket > 0 return maxDownloadRate == 0 or downloadBucket > 0
def can_send(): def can_send():
"""Predicate indicating whether the upload throttle is in effect"""
return maxUploadRate == 0 or uploadBucket > 0 return maxUploadRate == 0 or uploadBucket > 0
def update_received(download=0): def update_received(download=0):
"""Update the receiving throttle"""
global receivedBytes, downloadBucket, downloadTimestamp global receivedBytes, downloadBucket, downloadTimestamp
currentTimestamp = time.time() currentTimestamp = time.time()
receivedBytes += download receivedBytes += download
if maxDownloadRate > 0: if maxDownloadRate > 0:
@ -160,8 +189,12 @@ def update_received(download=0):
downloadBucket -= download downloadBucket -= download
downloadTimestamp = currentTimestamp downloadTimestamp = currentTimestamp
def update_sent(upload=0): def update_sent(upload=0):
"""Update the sending throttle"""
global sentBytes, uploadBucket, uploadTimestamp global sentBytes, uploadBucket, uploadTimestamp
currentTimestamp = time.time() currentTimestamp = time.time()
sentBytes += upload sentBytes += upload
if maxUploadRate > 0: if maxUploadRate > 0:
@ -172,15 +205,21 @@ def update_sent(upload=0):
uploadBucket -= upload uploadBucket -= upload
uploadTimestamp = currentTimestamp uploadTimestamp = currentTimestamp
def _exception(obj): def _exception(obj):
"""Handle exceptions as appropriate"""
try: try:
obj.handle_expt_event() obj.handle_expt_event()
except _reraised_exceptions: except _reraised_exceptions:
raise raise
except: except BaseException:
obj.handle_error() obj.handle_error()
def readwrite(obj, flags): def readwrite(obj, flags):
"""Read and write any pending data to/from the object"""
try: try:
if flags & select.POLLIN and can_receive(): if flags & select.POLLIN and can_receive():
obj.handle_read_event() obj.handle_read_event()
@ -197,15 +236,20 @@ def readwrite(obj, flags):
obj.handle_close() obj.handle_close()
except _reraised_exceptions: except _reraised_exceptions:
raise raise
except: except BaseException:
obj.handle_error() obj.handle_error()
def select_poller(timeout=0.0, map=None): def select_poller(timeout=0.0, map=None):
"""A poller which uses select(), available on most platforms.""" """A poller which uses select(), available on most platforms."""
# pylint: disable=redefined-builtin
if map is None: if map is None:
map = socket_map map = socket_map
if map: if map:
r = []; w = []; e = [] r = []
w = []
e = []
for fd, obj in list(map.items()): for fd, obj in list(map.items()):
is_r = obj.readable() is_r = obj.readable()
is_w = obj.writable() is_w = obj.writable()
@ -251,13 +295,16 @@ def select_poller(timeout=0.0, map=None):
else: else:
current_thread().stop.wait(timeout) current_thread().stop.wait(timeout)
def poll_poller(timeout=0.0, map=None): def poll_poller(timeout=0.0, map=None):
"""A poller which uses poll(), available on most UNIXen.""" """A poller which uses poll(), available on most UNIXen."""
# pylint: disable=redefined-builtin
if map is None: if map is None:
map = socket_map map = socket_map
if timeout is not None: if timeout is not None:
# timeout is in milliseconds # timeout is in milliseconds
timeout = int(timeout*1000) timeout = int(timeout * 1000)
try: try:
poll_poller.pollster poll_poller.pollster
except AttributeError: except AttributeError:
@ -301,12 +348,16 @@ def poll_poller(timeout=0.0, map=None):
else: else:
current_thread().stop.wait(timeout) current_thread().stop.wait(timeout)
# Aliases for backward compatibility # Aliases for backward compatibility
poll = select_poller poll = select_poller
poll2 = poll3 = poll_poller poll2 = poll3 = poll_poller
def epoll_poller(timeout=0.0, map=None): def epoll_poller(timeout=0.0, map=None):
"""A poller which uses epoll(), supported on Linux 2.5.44 and newer.""" """A poller which uses epoll(), supported on Linux 2.5.44 and newer."""
# pylint: disable=redefined-builtin
if map is None: if map is None:
map = socket_map map = socket_map
try: try:
@ -346,7 +397,7 @@ def epoll_poller(timeout=0.0, map=None):
if e.errno != EINTR: if e.errno != EINTR:
raise raise
r = [] r = []
except select.error, err: except select.error as err:
if err.args[0] != EINTR: if err.args[0] != EINTR:
raise raise
r = [] r = []
@ -358,8 +409,11 @@ def epoll_poller(timeout=0.0, map=None):
else: else:
current_thread().stop.wait(timeout) current_thread().stop.wait(timeout)
def kqueue_poller(timeout=0.0, map=None): def kqueue_poller(timeout=0.0, map=None):
"""A poller which uses kqueue(), BSD specific.""" """A poller which uses kqueue(), BSD specific."""
# pylint: disable=redefined-builtin,no-member
if map is None: if map is None:
map = socket_map map = socket_map
try: try:
@ -425,8 +479,10 @@ def kqueue_poller(timeout=0.0, map=None):
current_thread().stop.wait(timeout) current_thread().stop.wait(timeout)
def loop(timeout=30.0, use_poll=False, map=None, count=None, def loop(timeout=30.0, use_poll=False, map=None, count=None, poller=None):
poller=None): """Poll in a loop, until count or timeout is reached"""
# pylint: disable=redefined-builtin
if map is None: if map is None:
map = socket_map map = socket_map
if count is None: if count is None:
@ -460,10 +516,13 @@ def loop(timeout=30.0, use_poll=False, map=None, count=None,
break break
# then poll # then poll
poller(subtimeout, map) poller(subtimeout, map)
if type(count) is int: if isinstance(count, int):
count = count - 1 count = count - 1
class dispatcher: class dispatcher:
"""Dispatcher for socket objects"""
# pylint: disable=too-many-public-methods,too-many-instance-attributes,old-style-class
debug = False debug = False
connected = False connected = False
@ -478,6 +537,7 @@ class dispatcher:
minTx = 1500 minTx = 1500
def __init__(self, sock=None, map=None): def __init__(self, sock=None, map=None):
# pylint: disable=redefined-builtin
if map is None: if map is None:
self._map = socket_map self._map = socket_map
else: else:
@ -510,7 +570,7 @@ class dispatcher:
self.socket = None self.socket = None
def __repr__(self): def __repr__(self):
status = [self.__class__.__module__+"."+self.__class__.__name__] status = [self.__class__.__module__ + "." + self.__class__.__name__]
if self.accepting and self.addr: if self.accepting and self.addr:
status.append('listening') status.append('listening')
elif self.connected: elif self.connected:
@ -525,7 +585,9 @@ class dispatcher:
__str__ = __repr__ __str__ = __repr__
def add_channel(self, map=None): def add_channel(self, map=None):
#self.log_info('adding channel %s' % self) """Add a channel"""
# pylint: disable=redefined-builtin
if map is None: if map is None:
map = self._map map = self._map
map[self._fileno] = self map[self._fileno] = self
@ -533,11 +595,13 @@ class dispatcher:
self.poller_filter = 0 self.poller_filter = 0
def del_channel(self, map=None): def del_channel(self, map=None):
"""Delete a channel"""
# pylint: disable=redefined-builtin
fd = self._fileno fd = self._fileno
if map is None: if map is None:
map = self._map map = self._map
if fd in map: if fd in map:
#self.log_info('closing channel %d:%s' % (fd, self))
del map[fd] del map[fd]
if self._fileno: if self._fileno:
try: try:
@ -564,19 +628,23 @@ class dispatcher:
self.poller_registered = False self.poller_registered = False
def create_socket(self, family=socket.AF_INET, socket_type=socket.SOCK_STREAM): def create_socket(self, family=socket.AF_INET, socket_type=socket.SOCK_STREAM):
"""Create a socket"""
self.family_and_type = family, socket_type self.family_and_type = family, socket_type
sock = socket.socket(family, socket_type) sock = socket.socket(family, socket_type)
sock.setblocking(0) sock.setblocking(0)
self.set_socket(sock) self.set_socket(sock)
def set_socket(self, sock, map=None): def set_socket(self, sock, map=None):
"""Set socket"""
# pylint: disable=redefined-builtin
self.socket = sock self.socket = sock
## self.__dict__['socket'] = sock
self._fileno = sock.fileno() self._fileno = sock.fileno()
self.add_channel(map) self.add_channel(map)
def set_reuse_addr(self): def set_reuse_addr(self):
# try to re-use a server port if possible """try to re-use a server port if possible"""
try: try:
self.socket.setsockopt( self.socket.setsockopt(
socket.SOL_SOCKET, socket.SO_REUSEADDR, socket.SOL_SOCKET, socket.SO_REUSEADDR,
@ -593,11 +661,13 @@ class dispatcher:
# ================================================== # ==================================================
def readable(self): def readable(self):
"""Predicate to indicate download throttle status"""
if maxDownloadRate > 0: if maxDownloadRate > 0:
return downloadBucket > dispatcher.minTx return downloadBucket > dispatcher.minTx
return True return True
def writable(self): def writable(self):
"""Predicate to indicate upload throttle status"""
if maxUploadRate > 0: if maxUploadRate > 0:
return uploadBucket > dispatcher.minTx return uploadBucket > dispatcher.minTx
return True return True
@ -607,16 +677,19 @@ class dispatcher:
# ================================================== # ==================================================
def listen(self, num): def listen(self, num):
"""Listen on a port"""
self.accepting = True self.accepting = True
if os.name == 'nt' and num > 5: if os.name == 'nt' and num > 5:
num = 5 num = 5
return self.socket.listen(num) return self.socket.listen(num)
def bind(self, addr): def bind(self, addr):
"""Bind to an address"""
self.addr = addr self.addr = addr
return self.socket.bind(addr) return self.socket.bind(addr)
def connect(self, address): def connect(self, address):
"""Connect to an address"""
self.connected = False self.connected = False
self.connecting = True self.connecting = True
err = self.socket.connect_ex(address) err = self.socket.connect_ex(address)
@ -631,7 +704,7 @@ class dispatcher:
raise socket.error(err, errorcode[err]) raise socket.error(err, errorcode[err])
def accept(self): def accept(self):
# XXX can return either an address pair or None """Accept incoming connections. Returns either an address pair or None."""
try: try:
conn, addr = self.socket.accept() conn, addr = self.socket.accept()
except TypeError: except TypeError:
@ -645,6 +718,7 @@ class dispatcher:
return conn, addr return conn, addr
def send(self, data): def send(self, data):
"""Send data"""
try: try:
result = self.socket.send(data) result = self.socket.send(data)
return result return result
@ -658,6 +732,7 @@ class dispatcher:
raise raise
def recv(self, buffer_size): def recv(self, buffer_size):
"""Receive data"""
try: try:
data = self.socket.recv(buffer_size) data = self.socket.recv(buffer_size)
if not data: if not data:
@ -665,7 +740,6 @@ class dispatcher:
# a read condition, and having recv() return 0. # a read condition, and having recv() return 0.
self.handle_close() self.handle_close()
return b'' return b''
else:
return data return data
except socket.error as why: except socket.error as why:
# winsock sometimes raises ENOTCONN # winsock sometimes raises ENOTCONN
@ -678,6 +752,7 @@ class dispatcher:
raise raise
def close(self): def close(self):
"""Close connection"""
self.connected = False self.connected = False
self.accepting = False self.accepting = False
self.connecting = False self.connecting = False
@ -695,10 +770,10 @@ class dispatcher:
retattr = getattr(self.socket, attr) retattr = getattr(self.socket, attr)
except AttributeError: except AttributeError:
raise AttributeError("%s instance has no attribute '%s'" raise AttributeError("%s instance has no attribute '%s'"
%(self.__class__.__name__, attr)) % (self.__class__.__name__, attr))
else: else:
msg = "%(me)s.%(attr)s is deprecated; use %(me)s.socket.%(attr)s " \ msg = "%(me)s.%(attr)s is deprecated; use %(me)s.socket.%(attr)s " \
"instead" % {'me' : self.__class__.__name__, 'attr' : attr} "instead" % {'me': self.__class__.__name__, 'attr': attr}
warnings.warn(msg, DeprecationWarning, stacklevel=2) warnings.warn(msg, DeprecationWarning, stacklevel=2)
return retattr return retattr
@ -707,13 +782,16 @@ class dispatcher:
# and 'log_info' is for informational, warning and error logging. # and 'log_info' is for informational, warning and error logging.
def log(self, message): def log(self, message):
"""Log a message to stderr"""
sys.stderr.write('log: %s\n' % str(message)) sys.stderr.write('log: %s\n' % str(message))
def log_info(self, message, log_type='info'): def log_info(self, message, log_type='info'):
"""Conditionally print a message"""
if log_type not in self.ignore_log_types: if log_type not in self.ignore_log_types:
print('%s: %s' % (log_type, message)) print '%s: %s' % (log_type, message)
def handle_read_event(self): def handle_read_event(self):
"""Handle a read event"""
if self.accepting: if self.accepting:
# accepting sockets are never connected, they "spawn" new # accepting sockets are never connected, they "spawn" new
# sockets that are connected # sockets that are connected
@ -726,6 +804,7 @@ class dispatcher:
self.handle_read() self.handle_read()
def handle_connect_event(self): def handle_connect_event(self):
"""Handle a connection event"""
err = self.socket.getsockopt(socket.SOL_SOCKET, socket.SO_ERROR) err = self.socket.getsockopt(socket.SOL_SOCKET, socket.SO_ERROR)
if err != 0: if err != 0:
raise socket.error(err, _strerror(err)) raise socket.error(err, _strerror(err))
@ -734,6 +813,7 @@ class dispatcher:
self.connecting = False self.connecting = False
def handle_write_event(self): def handle_write_event(self):
"""Handle a write event"""
if self.accepting: if self.accepting:
# Accepting sockets shouldn't get a write event. # Accepting sockets shouldn't get a write event.
# We will pretend it didn't happen. # We will pretend it didn't happen.
@ -745,6 +825,7 @@ class dispatcher:
self.handle_write() self.handle_write()
def handle_expt_event(self): def handle_expt_event(self):
"""Handle expected exceptions"""
# handle_expt_event() is called if there might be an error on the # handle_expt_event() is called if there might be an error on the
# socket, or if there is OOB data # socket, or if there is OOB data
# check for the error condition first # check for the error condition first
@ -763,12 +844,13 @@ class dispatcher:
self.handle_expt() self.handle_expt()
def handle_error(self): def handle_error(self):
nil, t, v, tbinfo = compact_traceback() """Handle unexpected exceptions"""
_, t, v, tbinfo = compact_traceback()
# sometimes a user repr method will crash. # sometimes a user repr method will crash.
try: try:
self_repr = repr(self) self_repr = repr(self)
except: except BaseException:
self_repr = '<__repr__(self) failed for object at %0x>' % id(self) self_repr = '<__repr__(self) failed for object at %0x>' % id(self)
self.log_info( self.log_info(
@ -782,64 +864,81 @@ class dispatcher:
) )
self.handle_close() self.handle_close()
def handle_expt(self):
self.log_info('unhandled incoming priority event', 'warning')
def handle_read(self):
self.log_info('unhandled read event', 'warning')
def handle_write(self):
self.log_info('unhandled write event', 'warning')
def handle_connect(self):
self.log_info('unhandled connect event', 'warning')
def handle_accept(self): def handle_accept(self):
"""Handle an accept event"""
pair = self.accept() pair = self.accept()
if pair is not None: if pair is not None:
self.handle_accepted(*pair) self.handle_accepted(*pair)
def handle_expt(self):
"""Log that the subclass does not implement handle_expt"""
self.log_info('unhandled incoming priority event', 'warning')
def handle_read(self):
"""Log that the subclass does not implement handle_read"""
self.log_info('unhandled read event', 'warning')
def handle_write(self):
"""Log that the subclass does not implement handle_write"""
self.log_info('unhandled write event', 'warning')
def handle_connect(self):
"""Log that the subclass does not implement handle_connect"""
self.log_info('unhandled connect event', 'warning')
def handle_accepted(self, sock, addr): def handle_accepted(self, sock, addr):
"""Log that the subclass does not implement handle_accepted"""
sock.close() sock.close()
self.log_info('unhandled accepted event on %s' % (addr), 'warning') self.log_info('unhandled accepted event on %s' % (addr), 'warning')
def handle_close(self): def handle_close(self):
"""Log that the subclass does not implement handle_close"""
self.log_info('unhandled close event', 'warning') self.log_info('unhandled close event', 'warning')
self.close() self.close()
# ---------------------------------------------------------------------------
# adds simple buffered output capability, useful for simple clients.
# [for more sophisticated usage use asynchat.async_chat]
# ---------------------------------------------------------------------------
class dispatcher_with_send(dispatcher): class dispatcher_with_send(dispatcher):
"""
adds simple buffered output capability, useful for simple clients.
[for more sophisticated usage use asynchat.async_chat]
"""
# pylint: disable=redefined-builtin
def __init__(self, sock=None, map=None): def __init__(self, sock=None, map=None):
# pylint: disable=redefined-builtin
dispatcher.__init__(self, sock, map) dispatcher.__init__(self, sock, map)
self.out_buffer = b'' self.out_buffer = b''
def initiate_send(self): def initiate_send(self):
"""Initiate a send"""
num_sent = 0 num_sent = 0
num_sent = dispatcher.send(self, self.out_buffer[:512]) num_sent = dispatcher.send(self, self.out_buffer[:512])
self.out_buffer = self.out_buffer[num_sent:] self.out_buffer = self.out_buffer[num_sent:]
def handle_write(self): def handle_write(self):
"""Handle a write event"""
self.initiate_send() self.initiate_send()
def writable(self): def writable(self):
return (not self.connected) or len(self.out_buffer) """Predicate to indicate if the object is writable"""
return not self.connected or len(self.out_buffer)
def send(self, data): def send(self, data):
"""Send data"""
if self.debug: if self.debug:
self.log_info('sending %s' % repr(data)) self.log_info('sending %s' % repr(data))
self.out_buffer = self.out_buffer + data self.out_buffer = self.out_buffer + data
self.initiate_send() self.initiate_send()
# --------------------------------------------------------------------------- # ---------------------------------------------------------------------------
# used for debugging. # used for debugging.
# --------------------------------------------------------------------------- # ---------------------------------------------------------------------------
def compact_traceback(): def compact_traceback():
"""Return a compact traceback"""
t, v, tb = sys.exc_info() t, v, tb = sys.exc_info()
tbinfo = [] tbinfo = []
if not tb: # Must have a traceback if not tb: # Must have a traceback
@ -855,11 +954,15 @@ def compact_traceback():
# just to be safe # just to be safe
del tb del tb
file, function, line = tbinfo[-1] filename, function, line = tbinfo[-1]
info = ' '.join(['[%s|%s|%s]' % x for x in tbinfo]) info = ' '.join(['[%s|%s|%s]' % x for x in tbinfo])
return (file, function, line), t, v, info return (filename, function, line), t, v, info
def close_all(map=None, ignore_all=False): def close_all(map=None, ignore_all=False):
"""Close all connections"""
# pylint: disable=redefined-builtin
if map is None: if map is None:
map = socket_map map = socket_map
for x in list(map.values()): for x in list(map.values()):
@ -872,11 +975,12 @@ def close_all(map=None, ignore_all=False):
raise raise
except _reraised_exceptions: except _reraised_exceptions:
raise raise
except: except BaseException:
if not ignore_all: if not ignore_all:
raise raise
map.clear() map.clear()
# Asynchronous File I/O: # Asynchronous File I/O:
# #
# After a little research (reading man pages on various unixen, and # After a little research (reading man pages on various unixen, and
@ -890,24 +994,31 @@ def close_all(map=None, ignore_all=False):
# #
# Regardless, this is useful for pipes, and stdin/stdout... # Regardless, this is useful for pipes, and stdin/stdout...
if os.name == 'posix': if os.name == 'posix':
import fcntl import fcntl
class file_wrapper: class file_wrapper:
# Here we override just enough to make a file """
# look like a socket for the purposes of asyncore. Here we override just enough to make a file look like a socket for the purposes of asyncore.
# The passed fd is automatically os.dup()'d
The passed fd is automatically os.dup()'d
"""
# pylint: disable=old-style-class
def __init__(self, fd): def __init__(self, fd):
self.fd = os.dup(fd) self.fd = os.dup(fd)
def recv(self, *args): def recv(self, *args):
"""Fake recv()"""
return os.read(self.fd, *args) return os.read(self.fd, *args)
def send(self, *args): def send(self, *args):
"""Fake send()"""
return os.write(self.fd, *args) return os.write(self.fd, *args)
def getsockopt(self, level, optname, buflen=None): def getsockopt(self, level, optname, buflen=None):
"""Fake getsockopt()"""
if (level == socket.SOL_SOCKET and if (level == socket.SOL_SOCKET and
optname == socket.SO_ERROR and optname == socket.SO_ERROR and
not buflen): not buflen):
@ -919,14 +1030,19 @@ if os.name == 'posix':
write = send write = send
def close(self): def close(self):
"""Fake close()"""
os.close(self.fd) os.close(self.fd)
def fileno(self): def fileno(self):
"""Fake fileno()"""
return self.fd return self.fd
class file_dispatcher(dispatcher): class file_dispatcher(dispatcher):
"""A dispatcher for file_wrapper objects"""
def __init__(self, fd, map=None): def __init__(self, fd, map=None):
# pylint: disable=redefined-builtin
dispatcher.__init__(self, None, map) dispatcher.__init__(self, None, map)
self.connected = True self.connected = True
try: try:
@ -940,6 +1056,7 @@ if os.name == 'posix':
fcntl.fcntl(fd, fcntl.F_SETFL, flags) fcntl.fcntl(fd, fcntl.F_SETFL, flags)
def set_file(self, fd): def set_file(self, fd):
"""Set file"""
self.socket = file_wrapper(fd) self.socket = file_wrapper(fd)
self._fileno = self.socket.fileno() self._fileno = self.socket.fileno()
self.add_channel() self.add_channel()

View File

@ -1,41 +1,42 @@
import base64 # pylint: disable=too-many-ancestors
from binascii import hexlify """
import hashlib src/network/tcp.py
import math ==================
import time """
from pprint import pprint
import socket
import struct
import random
import traceback
from addresses import calculateInventoryHash import math
from debug import logger import random
from helper_random import randomBytes import socket
import helper_random import time
from inventory import Inventory
import knownnodes
from network.advanceddispatcher import AdvancedDispatcher
from network.bmproto import BMProtoError, BMProtoInsufficientDataError, BMProtoExcessiveDataError, BMProto
from network.bmobject import BMObject, BMObjectInsufficientPOWError, BMObjectInvalidDataError, BMObjectExpiredError, BMObjectUnwantedStreamError, BMObjectInvalidError, BMObjectAlreadyHaveError
import network.connectionpool
from network.dandelion import Dandelion
from network.node import Node
import network.asyncore_pollchoose as asyncore
from network.proxy import Proxy, ProxyError, GeneralProxyError
from network.objectracker import ObjectTracker
from network.socks5 import Socks5Connection, Socks5Resolver, Socks5AuthError, Socks5Error
from network.socks4a import Socks4aConnection, Socks4aResolver, Socks4aError
from network.tls import TLSDispatcher
import addresses import addresses
from bmconfigparser import BMConfigParser import helper_random
from queues import invQueue, objectProcessorQueue, portCheckerQueue, UISignalQueue, receiveDataQueue import knownnodes
import network.asyncore_pollchoose as asyncore
import network.connectionpool
import protocol
import shared import shared
import state import state
import protocol from bmconfigparser import BMConfigParser
from debug import logger
from helper_random import randomBytes
from inventory import Inventory
from network.advanceddispatcher import AdvancedDispatcher
from network.bmproto import BMProto
from network.dandelion import Dandelion
from network.objectracker import ObjectTracker
from network.socks4a import Socks4aConnection
from network.socks5 import Socks5Connection
from network.tls import TLSDispatcher
from queues import UISignalQueue, invQueue, receiveDataQueue
class TCPConnection(BMProto, TLSDispatcher): # pylint: disable=too-many-instance-attributes
"""
.. todo:: Look to understand and/or fix the non-parent-init-called
"""
class TCPConnection(BMProto, TLSDispatcher):
def __init__(self, address=None, sock=None): def __init__(self, address=None, sock=None):
BMProto.__init__(self, address=address, sock=sock) BMProto.__init__(self, address=address, sock=sock)
self.verackReceived = False self.verackReceived = False
@ -67,18 +68,25 @@ class TCPConnection(BMProto, TLSDispatcher):
self.connect(self.destination) self.connect(self.destination)
logger.debug("Connecting to %s:%i", self.destination.host, self.destination.port) logger.debug("Connecting to %s:%i", self.destination.host, self.destination.port)
encodedAddr = protocol.encodeHost(self.destination.host) encodedAddr = protocol.encodeHost(self.destination.host)
if protocol.checkIPAddress(encodedAddr, True) and not protocol.checkSocksIP(self.destination.host): self.local = all([
self.local = True protocol.checkIPAddress(encodedAddr, True),
else: not protocol.checkSocksIP(self.destination.host)
self.local = False ])
#shared.connectedHostsList[self.destination] = 0 ObjectTracker.__init__(self) # pylint: disable=non-parent-init-called
ObjectTracker.__init__(self)
self.bm_proto_reset() self.bm_proto_reset()
self.set_state("bm_header", expectBytes=protocol.Header.size) self.set_state("bm_header", expectBytes=protocol.Header.size)
def antiIntersectionDelay(self, initial = False): def antiIntersectionDelay(self, initial=False):
"""
This is a defense against the so called intersection attacks.
It is called when you notice peer is requesting non-existing objects, or right after the connection is
established. It will estimate how long an object will take to propagate across the network, and skip processing
"getdata" requests until then. This means an attacker only has one shot per IP to perform the attack.
"""
# estimated time for a small object to propagate across the whole network # estimated time for a small object to propagate across the whole network
delay = math.ceil(math.log(max(len(knownnodes.knownNodes[x]) for x in knownnodes.knownNodes) + 2, 20)) * (0.2 + invQueue.queueCount/2.0) max_known_nodes = max(len(knownnodes.knownNodes[x]) for x in knownnodes.knownNodes)
delay = math.ceil(math.log(max_known_nodes + 2, 20)) * (0.2 + invQueue.queueCount / 2.0)
# take the stream with maximum amount of nodes # take the stream with maximum amount of nodes
# +2 is to avoid problems with log(0) and log(1) # +2 is to avoid problems with log(0) and log(1)
# 20 is avg connected nodes count # 20 is avg connected nodes count
@ -93,12 +101,17 @@ class TCPConnection(BMProto, TLSDispatcher):
self.skipUntil = time.time() + delay self.skipUntil = time.time() + delay
def state_connection_fully_established(self): def state_connection_fully_established(self):
"""
State after the bitmessage protocol handshake is completed (version/verack exchange, and if both side support
TLS, the TLS handshake as well).
"""
self.set_connection_fully_established() self.set_connection_fully_established()
self.set_state("bm_header") self.set_state("bm_header")
self.bm_proto_reset() self.bm_proto_reset()
return True return True
def set_connection_fully_established(self): def set_connection_fully_established(self):
"""Initiate inventory synchronisation."""
if not self.isOutbound and not self.local: if not self.isOutbound and not self.local:
shared.clientHasReceivedIncomingConnections = True shared.clientHasReceivedIncomingConnections = True
UISignalQueue.put(('setStatusIcon', 'green')) UISignalQueue.put(('setStatusIcon', 'green'))
@ -113,20 +126,18 @@ class TCPConnection(BMProto, TLSDispatcher):
self.sendBigInv() self.sendBigInv()
def sendAddr(self): def sendAddr(self):
"""Send a partial list of known addresses to peer."""
# We are going to share a maximum number of 1000 addrs (per overlapping # We are going to share a maximum number of 1000 addrs (per overlapping
# stream) with our peer. 500 from overlapping streams, 250 from the # stream) with our peer. 500 from overlapping streams, 250 from the
# left child stream, and 250 from the right child stream. # left child stream, and 250 from the right child stream.
maxAddrCount = BMConfigParser().safeGetInt("bitmessagesettings", "maxaddrperstreamsend", 500) maxAddrCount = BMConfigParser().safeGetInt("bitmessagesettings", "maxaddrperstreamsend", 500)
# init # init
addressCount = 0
payload = b''
templist = [] templist = []
addrs = {} addrs = {}
for stream in self.streams: for stream in self.streams:
with knownnodes.knownNodesLock: with knownnodes.knownNodesLock:
if len(knownnodes.knownNodes[stream]) > 0: if knownnodes.knownNodes[stream]:
filtered = {k: v for k, v in knownnodes.knownNodes[stream].items() filtered = {k: v for k, v in knownnodes.knownNodes[stream].items()
if v["lastseen"] > (int(time.time()) - shared.maximumAgeOfNodesThatIAdvertiseToOthers)} if v["lastseen"] > (int(time.time()) - shared.maximumAgeOfNodesThatIAdvertiseToOthers)}
elemCount = len(filtered) elemCount = len(filtered)
@ -135,28 +146,30 @@ class TCPConnection(BMProto, TLSDispatcher):
# only if more recent than 3 hours # only if more recent than 3 hours
addrs[stream] = helper_random.randomsample(filtered.items(), elemCount) addrs[stream] = helper_random.randomsample(filtered.items(), elemCount)
# sent 250 only if the remote isn't interested in it # sent 250 only if the remote isn't interested in it
if len(knownnodes.knownNodes[stream * 2]) > 0 and stream not in self.streams: if knownnodes.knownNodes[stream * 2] and stream not in self.streams:
filtered = {k: v for k, v in knownnodes.knownNodes[stream*2].items() filtered = {k: v for k, v in knownnodes.knownNodes[stream * 2].items()
if v["lastseen"] > (int(time.time()) - shared.maximumAgeOfNodesThatIAdvertiseToOthers)} if v["lastseen"] > (int(time.time()) - shared.maximumAgeOfNodesThatIAdvertiseToOthers)}
elemCount = len(filtered) elemCount = len(filtered)
if elemCount > maxAddrCount / 2: if elemCount > maxAddrCount / 2:
elemCount = int(maxAddrCount / 2) elemCount = int(maxAddrCount / 2)
addrs[stream * 2] = helper_random.randomsample(filtered.items(), elemCount) addrs[stream * 2] = helper_random.randomsample(filtered.items(), elemCount)
if len(knownnodes.knownNodes[(stream * 2) + 1]) > 0 and stream not in self.streams: if knownnodes.knownNodes[(stream * 2) + 1] and stream not in self.streams:
filtered = {k: v for k, v in knownnodes.knownNodes[stream*2+1].items() filtered = {k: v for k, v in knownnodes.knownNodes[stream * 2 + 1].items()
if v["lastseen"] > (int(time.time()) - shared.maximumAgeOfNodesThatIAdvertiseToOthers)} if v["lastseen"] > (int(time.time()) - shared.maximumAgeOfNodesThatIAdvertiseToOthers)}
elemCount = len(filtered) elemCount = len(filtered)
if elemCount > maxAddrCount / 2: if elemCount > maxAddrCount / 2:
elemCount = int(maxAddrCount / 2) elemCount = int(maxAddrCount / 2)
addrs[stream * 2 + 1] = helper_random.randomsample(filtered.items(), elemCount) addrs[stream * 2 + 1] = helper_random.randomsample(filtered.items(), elemCount)
for substream in addrs.keys(): for substream in addrs:
for peer, params in addrs[substream]: for peer, params in addrs[substream]:
templist.append((substream, peer, params["lastseen"])) templist.append((substream, peer, params["lastseen"]))
if len(templist) > 0: if templist:
self.append_write_buf(BMProto.assembleAddr(templist)) self.append_write_buf(BMProto.assembleAddr(templist))
def sendBigInv(self): def sendBigInv(self):
"""Send hashes of all inventory objects, chunked as the protocol has a per-command limit."""
def sendChunk(): def sendChunk():
"""Send one chunk of inv entries in one command"""
if objectCount == 0: if objectCount == 0:
return return
logger.debug('Sending huge inv message with %i objects to just this one peer', objectCount) logger.debug('Sending huge inv message with %i objects to just this one peer', objectCount)
@ -172,13 +185,12 @@ class TCPConnection(BMProto, TLSDispatcher):
if Dandelion().hasHash(objHash): if Dandelion().hasHash(objHash):
continue continue
bigInvList[objHash] = 0 bigInvList[objHash] = 0
#self.objectsNewToThem[objHash] = time.time()
objectCount = 0 objectCount = 0
payload = b'' payload = b''
# Now let us start appending all of these hashes together. They will be # Now let us start appending all of these hashes together. They will be
# sent out in a big inv message to our new peer. # sent out in a big inv message to our new peer.
for hash, storedValue in bigInvList.items(): for obj_hash, _ in bigInvList.items():
payload += hash payload += obj_hash
objectCount += 1 objectCount += 1
# Remove -1 below when sufficient time has passed for users to # Remove -1 below when sufficient time has passed for users to
@ -193,20 +205,26 @@ class TCPConnection(BMProto, TLSDispatcher):
sendChunk() sendChunk()
def handle_connect(self): def handle_connect(self):
"""Callback for TCP connection being established."""
try: try:
AdvancedDispatcher.handle_connect(self) AdvancedDispatcher.handle_connect(self)
except socket.error as e: except socket.error as e:
if e.errno in asyncore._DISCONNECTED: if e.errno in asyncore._DISCONNECTED: # pylint: disable=protected-access
logger.debug("%s:%i: Connection failed: %s" % (self.destination.host, self.destination.port, str(e))) logger.debug("%s:%i: Connection failed: %s", self.destination.host, self.destination.port, str(e))
return return
self.nodeid = randomBytes(8) self.nodeid = randomBytes(8)
self.append_write_buf(protocol.assembleVersionMessage(self.destination.host, self.destination.port, \ self.append_write_buf(
network.connectionpool.BMConnectionPool().streams, False, nodeid=self.nodeid)) protocol.assembleVersionMessage(
#print "%s:%i: Sending version" % (self.destination.host, self.destination.port) self.destination.host,
self.destination.port,
network.connectionpool.BMConnectionPool().streams,
False,
nodeid=self.nodeid))
self.connectedAt = time.time() self.connectedAt = time.time()
receiveDataQueue.put(self.destination) receiveDataQueue.put(self.destination)
def handle_read(self): def handle_read(self):
"""Callback for reading from a socket"""
TLSDispatcher.handle_read(self) TLSDispatcher.handle_read(self)
if self.isOutbound and self.fullyEstablished: if self.isOutbound and self.fullyEstablished:
for s in self.streams: for s in self.streams:
@ -218,9 +236,11 @@ class TCPConnection(BMProto, TLSDispatcher):
receiveDataQueue.put(self.destination) receiveDataQueue.put(self.destination)
def handle_write(self): def handle_write(self):
"""Callback for writing to a socket"""
TLSDispatcher.handle_write(self) TLSDispatcher.handle_write(self)
def handle_close(self): def handle_close(self):
"""Callback for connection being closed."""
if self.isOutbound and not self.fullyEstablished: if self.isOutbound and not self.fullyEstablished:
knownnodes.decreaseRating(self.destination) knownnodes.decreaseRating(self.destination)
if self.fullyEstablished: if self.fullyEstablished:
@ -231,37 +251,55 @@ class TCPConnection(BMProto, TLSDispatcher):
class Socks5BMConnection(Socks5Connection, TCPConnection): class Socks5BMConnection(Socks5Connection, TCPConnection):
"""SOCKS5 wrapper for TCP connections"""
def __init__(self, address): def __init__(self, address):
Socks5Connection.__init__(self, address=address) Socks5Connection.__init__(self, address=address)
TCPConnection.__init__(self, address=address, sock=self.socket) TCPConnection.__init__(self, address=address, sock=self.socket)
self.set_state("init") self.set_state("init")
def state_proxy_handshake_done(self): def state_proxy_handshake_done(self):
"""State when SOCKS5 connection succeeds, we need to send a Bitmessage handshake to peer."""
Socks5Connection.state_proxy_handshake_done(self) Socks5Connection.state_proxy_handshake_done(self)
self.nodeid = randomBytes(8) self.nodeid = randomBytes(8)
self.append_write_buf(protocol.assembleVersionMessage(self.destination.host, self.destination.port, \ self.append_write_buf(
network.connectionpool.BMConnectionPool().streams, False, nodeid=self.nodeid)) protocol.assembleVersionMessage(
self.destination.host,
self.destination.port,
network.connectionpool.BMConnectionPool().streams,
False,
nodeid=self.nodeid))
self.set_state("bm_header", expectBytes=protocol.Header.size) self.set_state("bm_header", expectBytes=protocol.Header.size)
return True return True
class Socks4aBMConnection(Socks4aConnection, TCPConnection): class Socks4aBMConnection(Socks4aConnection, TCPConnection):
"""SOCKS4a wrapper for TCP connections"""
def __init__(self, address): def __init__(self, address):
Socks4aConnection.__init__(self, address=address) Socks4aConnection.__init__(self, address=address)
TCPConnection.__init__(self, address=address, sock=self.socket) TCPConnection.__init__(self, address=address, sock=self.socket)
self.set_state("init") self.set_state("init")
def state_proxy_handshake_done(self): def state_proxy_handshake_done(self):
"""State when SOCKS4a connection succeeds, we need to send a Bitmessage handshake to peer."""
Socks4aConnection.state_proxy_handshake_done(self) Socks4aConnection.state_proxy_handshake_done(self)
self.nodeid = randomBytes(8) self.nodeid = randomBytes(8)
self.append_write_buf(protocol.assembleVersionMessage(self.destination.host, self.destination.port, \ self.append_write_buf(
network.connectionpool.BMConnectionPool().streams, False, nodeid=self.nodeid)) protocol.assembleVersionMessage(
self.destination.host,
self.destination.port,
network.connectionpool.BMConnectionPool().streams,
False,
nodeid=self.nodeid))
self.set_state("bm_header", expectBytes=protocol.Header.size) self.set_state("bm_header", expectBytes=protocol.Header.size)
return True return True
class TCPServer(AdvancedDispatcher): class TCPServer(AdvancedDispatcher):
def __init__(self, host='127.0.0.1', port=8444): """TCP connection server for Bitmessage protocol"""
def __init__(self, host='127.0.0.1', port=8444): # pylint: disable=redefined-outer-name
if not hasattr(self, '_map'): if not hasattr(self, '_map'):
AdvancedDispatcher.__init__(self) AdvancedDispatcher.__init__(self)
self.create_socket(socket.AF_INET, socket.SOCK_STREAM) self.create_socket(socket.AF_INET, socket.SOCK_STREAM)
@ -284,15 +322,17 @@ class TCPServer(AdvancedDispatcher):
self.listen(5) self.listen(5)
def is_bound(self): def is_bound(self):
"""Is the socket bound?"""
try: try:
return self.bound return self.bound
except AttributeError: except AttributeError:
return False return False
def handle_accept(self): def handle_accept(self):
"""Incoming connection callback"""
pair = self.accept() pair = self.accept()
if pair is not None: if pair is not None:
sock, addr = pair sock, _ = pair
state.ownAddresses[state.Peer(sock.getsockname()[0], sock.getsockname()[1])] = True state.ownAddresses[state.Peer(sock.getsockname()[0], sock.getsockname()[1])] = True
if len(network.connectionpool.BMConnectionPool().inboundConnections) + \ if len(network.connectionpool.BMConnectionPool().inboundConnections) + \
len(network.connectionpool.BMConnectionPool().outboundConnections) > \ len(network.connectionpool.BMConnectionPool().outboundConnections) > \
@ -314,17 +354,7 @@ if __name__ == "__main__":
for host in (("127.0.0.1", 8448),): for host in (("127.0.0.1", 8448),):
direct = TCPConnection(host) direct = TCPConnection(host)
while len(asyncore.socket_map) > 0: while asyncore.socket_map:
print "loop, state = %s" % (direct.state) print "loop, state = %s" % (direct.state)
asyncore.loop(timeout=10, count=1) asyncore.loop(timeout=10, count=1)
continue continue
proxy = Socks5BMConnection(host)
while len(asyncore.socket_map) > 0:
# print "loop, state = %s" % (proxy.state)
asyncore.loop(timeout=10, count=1)
proxy = Socks4aBMConnection(host)
while len(asyncore.socket_map) > 0:
# print "loop, state = %s" % (proxy.state)
asyncore.loop(timeout=10, count=1)

View File

@ -1,60 +1,71 @@
#import shared # pylint: disable=too-many-branches,too-many-statements,protected-access
#import time """
#from multiprocessing import Pool, cpu_count src/proofofwork.py
==================
"""
import ctypes
import hashlib import hashlib
from struct import unpack, pack import os
from subprocess import call
import sys import sys
import time import time
from struct import pack, unpack
from subprocess import call
import openclpow
import paths
import queues
import state
import tr
from bmconfigparser import BMConfigParser from bmconfigparser import BMConfigParser
from debug import logger from debug import logger
import paths
import openclpow
import queues
import tr
import os
import ctypes
import state
bitmsglib = 'bitmsghash.so' bitmsglib = 'bitmsghash.so'
bmpow = None bmpow = None
def _set_idle(): def _set_idle():
if 'linux' in sys.platform: if 'linux' in sys.platform:
os.nice(20) os.nice(20)
else: else:
try: try:
# pylint: disable=no-member,import-error
sys.getwindowsversion() sys.getwindowsversion()
import win32api,win32process,win32con # @UnresolvedImport import win32api
import win32process
import win32con
pid = win32api.GetCurrentProcessId() pid = win32api.GetCurrentProcessId()
handle = win32api.OpenProcess(win32con.PROCESS_ALL_ACCESS, True, pid) handle = win32api.OpenProcess(win32con.PROCESS_ALL_ACCESS, True, pid)
win32process.SetPriorityClass(handle, win32process.IDLE_PRIORITY_CLASS) win32process.SetPriorityClass(handle, win32process.IDLE_PRIORITY_CLASS)
except: except:
#Windows 64-bit # Windows 64-bit
pass pass
def _pool_worker(nonce, initialHash, target, pool_size): def _pool_worker(nonce, initialHash, target, pool_size):
_set_idle() _set_idle()
trialValue = float('inf') trialValue = float('inf')
while trialValue > target: while trialValue > target:
nonce += pool_size nonce += pool_size
trialValue, = unpack('>Q',hashlib.sha512(hashlib.sha512(pack('>Q',nonce) + initialHash).digest()).digest()[0:8]) trialValue, = unpack('>Q', hashlib.sha512(hashlib.sha512(
pack('>Q', nonce) + initialHash).digest()).digest()[0:8])
return [trialValue, nonce] return [trialValue, nonce]
def _doSafePoW(target, initialHash): def _doSafePoW(target, initialHash):
logger.debug("Safe PoW start") logger.debug("Safe PoW start")
nonce = 0 nonce = 0
trialValue = float('inf') trialValue = float('inf')
while trialValue > target and state.shutdown == 0: while trialValue > target and state.shutdown == 0:
nonce += 1 nonce += 1
trialValue, = unpack('>Q',hashlib.sha512(hashlib.sha512(pack('>Q',nonce) + initialHash).digest()).digest()[0:8]) trialValue, = unpack('>Q', hashlib.sha512(hashlib.sha512(
pack('>Q', nonce) + initialHash).digest()).digest()[0:8])
if state.shutdown != 0: if state.shutdown != 0:
raise StopIteration("Interrupted") raise StopIteration("Interrupted") # pylint: misplaced-bare-raise
logger.debug("Safe PoW done") logger.debug("Safe PoW done")
return [trialValue, nonce] return [trialValue, nonce]
def _doFastPoW(target, initialHash): def _doFastPoW(target, initialHash):
logger.debug("Fast PoW start") logger.debug("Fast PoW start")
from multiprocessing import Pool, cpu_count from multiprocessing import Pool, cpu_count
@ -97,6 +108,7 @@ def _doFastPoW(target, initialHash):
return result[0], result[1] return result[0], result[1]
time.sleep(0.2) time.sleep(0.2)
def _doCPoW(target, initialHash): def _doCPoW(target, initialHash):
h = initialHash h = initialHash
m = target m = target
@ -104,21 +116,29 @@ def _doCPoW(target, initialHash):
out_m = ctypes.c_ulonglong(m) out_m = ctypes.c_ulonglong(m)
logger.debug("C PoW start") logger.debug("C PoW start")
nonce = bmpow(out_h, out_m) nonce = bmpow(out_h, out_m)
trialValue, = unpack('>Q',hashlib.sha512(hashlib.sha512(pack('>Q',nonce) + initialHash).digest()).digest()[0:8]) trialValue, = unpack('>Q', hashlib.sha512(hashlib.sha512(pack('>Q', nonce) + initialHash).digest()).digest()[0:8])
if state.shutdown != 0: if state.shutdown != 0:
raise StopIteration("Interrupted") raise StopIteration("Interrupted")
logger.debug("C PoW done") logger.debug("C PoW done")
return [trialValue, nonce] return [trialValue, nonce]
def _doGPUPoW(target, initialHash): def _doGPUPoW(target, initialHash):
logger.debug("GPU PoW start") logger.debug("GPU PoW start")
nonce = openclpow.do_opencl_pow(initialHash.encode("hex"), target) nonce = openclpow.do_opencl_pow(initialHash.encode("hex"), target)
trialValue, = unpack('>Q',hashlib.sha512(hashlib.sha512(pack('>Q',nonce) + initialHash).digest()).digest()[0:8]) trialValue, = unpack('>Q', hashlib.sha512(hashlib.sha512(pack('>Q', nonce) + initialHash).digest()).digest()[0:8])
#print "{} - value {} < {}".format(nonce, trialValue, target)
if trialValue > target: if trialValue > target:
deviceNames = ", ".join(gpu.name for gpu in openclpow.enabledGpus) deviceNames = ", ".join(gpu.name for gpu in openclpow.enabledGpus)
queues.UISignalQueue.put(('updateStatusBar', (tr._translate("MainWindow",'Your GPU(s) did not calculate correctly, disabling OpenCL. Please report to the developers.'), 1))) queues.UISignalQueue.put((
logger.error("Your GPUs (%s) did not calculate correctly, disabling OpenCL. Please report to the developers.", deviceNames) 'updateStatusBar', (
tr._translate(
"MainWindow",
'Your GPU(s) did not calculate correctly, disabling OpenCL. Please report to the developers.'
),
1)))
logger.error(
"Your GPUs (%s) did not calculate correctly, disabling OpenCL. Please report to the developers.",
deviceNames)
openclpow.enabledGpus = [] openclpow.enabledGpus = []
raise Exception("GPU did not calculate correctly.") raise Exception("GPU did not calculate correctly.")
if state.shutdown != 0: if state.shutdown != 0:
@ -126,11 +146,17 @@ def _doGPUPoW(target, initialHash):
logger.debug("GPU PoW done") logger.debug("GPU PoW done")
return [trialValue, nonce] return [trialValue, nonce]
def estimate(difficulty, format = False):
def estimate(difficulty, format=False): # pylint: disable=redefined-builtin
"""
.. todo: fix unused variable
"""
ret = difficulty / 10 ret = difficulty / 10
if ret < 1: if ret < 1:
ret = 1 ret = 1
if format: if format:
# pylint: disable=unused-variable
out = str(int(ret)) + " seconds" out = str(int(ret)) + " seconds"
if ret > 60: if ret > 60:
ret /= 60 ret /= 60
@ -148,25 +174,46 @@ def estimate(difficulty, format = False):
if ret > 366: if ret > 366:
ret /= 366 ret /= 366
out = str(int(ret)) + " years" out = str(int(ret)) + " years"
else: ret = None # Ensure legacy behaviour
return ret return ret
def getPowType(): def getPowType():
"""Get the proof of work implementation"""
if openclpow.openclEnabled(): if openclpow.openclEnabled():
return "OpenCL" return "OpenCL"
if bmpow: if bmpow:
return "C" return "C"
return "python" return "python"
def notifyBuild(tried=False): def notifyBuild(tried=False):
"""Notify the user of the success or otherwise of building the PoW C module"""
if bmpow: if bmpow:
queues.UISignalQueue.put(('updateStatusBar', (tr._translate("proofofwork", "C PoW module built successfully."), 1))) queues.UISignalQueue.put(('updateStatusBar', (tr._translate(
"proofofwork", "C PoW module built successfully."), 1)))
elif tried: elif tried:
queues.UISignalQueue.put(('updateStatusBar', (tr._translate("proofofwork", "Failed to build C PoW module. Please build it manually."), 1))) queues.UISignalQueue.put(
(
'updateStatusBar', (
tr._translate(
"proofofwork",
"Failed to build C PoW module. Please build it manually."
),
1
)
)
)
else: else:
queues.UISignalQueue.put(('updateStatusBar', (tr._translate("proofofwork", "C PoW module unavailable. Please build it."), 1))) queues.UISignalQueue.put(('updateStatusBar', (tr._translate(
"proofofwork", "C PoW module unavailable. Please build it."), 1)))
def buildCPoW(): def buildCPoW():
"""Attempt to build the PoW C module"""
if bmpow is not None: if bmpow is not None:
return return
if paths.frozen is not None: if paths.frozen is not None:
@ -190,16 +237,14 @@ def buildCPoW():
except: except:
notifyBuild(True) notifyBuild(True)
def run(target, initialHash): def run(target, initialHash):
"""Run the proof of work thread"""
if state.shutdown != 0: if state.shutdown != 0:
raise raise # pylint: disable=misplaced-bare-raise
target = int(target) target = int(target)
if openclpow.openclEnabled(): if openclpow.openclEnabled():
# trialvalue1, nonce1 = _doGPUPoW(target, initialHash)
# trialvalue, nonce = _doFastPoW(target, initialHash)
# print "GPU: %s, %s" % (trialvalue1, nonce1)
# print "Fast: %s, %s" % (trialvalue, nonce)
# return [trialvalue, nonce]
try: try:
return _doGPUPoW(target, initialHash) return _doGPUPoW(target, initialHash)
except StopIteration: except StopIteration:
@ -225,24 +270,30 @@ def run(target, initialHash):
raise raise
except: except:
logger.error("Fast PoW got exception:", exc_info=True) logger.error("Fast PoW got exception:", exc_info=True)
pass #fallback
try: try:
return _doSafePoW(target, initialHash) return _doSafePoW(target, initialHash)
except StopIteration: except StopIteration:
raise raise
except: except:
pass #fallback pass # fallback
def resetPoW(): def resetPoW():
"""Initialise the OpenCL PoW"""
openclpow.initCL() openclpow.initCL()
# init # init
def init(): def init():
global bitmsglib, bso, bmpow """Initialise PoW"""
# pylint: disable=global-statement
global bitmsglib, bmpow
openclpow.initCL() openclpow.initCL()
if "win32" == sys.platform: if sys.platform == "win32":
if ctypes.sizeof(ctypes.c_voidp) == 4: if ctypes.sizeof(ctypes.c_voidp) == 4:
bitmsglib = 'bitmsghash32.dll' bitmsglib = 'bitmsghash32.dll'
else: else:

View File

@ -1,21 +1,33 @@
# A simple upnp module to forward port for BitMessage # pylint: disable=too-many-statements,too-many-branches,protected-access,no-self-use
# Reference: http://mattscodecave.com/posts/using-python-and-upnp-to-forward-a-port """
src/upnp.py
===========
A simple upnp module to forward port for BitMessage
Reference: http://mattscodecave.com/posts/using-python-and-upnp-to-forward-a-port
"""
import httplib import httplib
from random import randint
import socket import socket
from struct import unpack, pack
import threading import threading
import time import time
from bmconfigparser import BMConfigParser import urllib2
from network.connectionpool import BMConnectionPool from random import randint
from helper_threading import * from urlparse import urlparse
from xml.dom.minidom import Document, parseString
import queues import queues
import shared import shared
import state import state
import tr import tr
from bmconfigparser import BMConfigParser
from debug import logger
from helper_threading import StoppableThread
from network.connectionpool import BMConnectionPool
def createRequestXML(service, action, arguments=None): def createRequestXML(service, action, arguments=None):
from xml.dom.minidom import Document """Router UPnP requests are XML formatted"""
doc = Document() doc = Document()
@ -63,11 +75,17 @@ def createRequestXML(service, action, arguments=None):
# our tree is ready, conver it to a string # our tree is ready, conver it to a string
return doc.toxml() return doc.toxml()
class UPnPError(Exception):
def __init__(self, message):
self.message
class Router: class UPnPError(Exception):
"""Handle a UPnP error"""
def __init__(self, message):
super(UPnPError, self).__init__()
logger.error(message)
class Router: # pylint: disable=old-style-class
"""Encapulate routing"""
name = "" name = ""
path = "" path = ""
address = None address = None
@ -75,10 +93,6 @@ class Router:
extPort = None extPort = None
def __init__(self, ssdpResponse, address): def __init__(self, ssdpResponse, address):
import urllib2
from xml.dom.minidom import parseString
from urlparse import urlparse
from debug import logger
self.address = address self.address = address
@ -92,9 +106,9 @@ class Router:
try: try:
self.routerPath = urlparse(header['location']) self.routerPath = urlparse(header['location'])
if not self.routerPath or not hasattr(self.routerPath, "hostname"): if not self.routerPath or not hasattr(self.routerPath, "hostname"):
logger.error ("UPnP: no hostname: %s", header['location']) logger.error("UPnP: no hostname: %s", header['location'])
except KeyError: except KeyError:
logger.error ("UPnP: missing location header") logger.error("UPnP: missing location header")
# get the profile xml file and read it into a variable # get the profile xml file and read it into a variable
directory = urllib2.urlopen(header['location']).read() directory = urllib2.urlopen(header['location']).read()
@ -112,8 +126,18 @@ class Router:
self.path = service.parentNode.getElementsByTagName('controlURL')[0].childNodes[0].data self.path = service.parentNode.getElementsByTagName('controlURL')[0].childNodes[0].data
self.upnp_schema = service.childNodes[0].data.split(':')[-2] self.upnp_schema = service.childNodes[0].data.split(':')[-2]
def AddPortMapping(self, externalPort, internalPort, internalClient, protocol, description, leaseDuration = 0, enabled = 1): def AddPortMapping(
from debug import logger self,
externalPort,
internalPort,
internalClient,
protocol,
description,
leaseDuration=0,
enabled=1,
): # pylint: disable=too-many-arguments
"""Add UPnP port mapping"""
resp = self.soapRequest(self.upnp_schema + ':1', 'AddPortMapping', [ resp = self.soapRequest(self.upnp_schema + ':1', 'AddPortMapping', [
('NewRemoteHost', ''), ('NewRemoteHost', ''),
('NewExternalPort', str(externalPort)), ('NewExternalPort', str(externalPort)),
@ -125,11 +149,13 @@ class Router:
('NewLeaseDuration', str(leaseDuration)) ('NewLeaseDuration', str(leaseDuration))
]) ])
self.extPort = externalPort self.extPort = externalPort
logger.info("Successfully established UPnP mapping for %s:%i on external port %i", internalClient, internalPort, externalPort) logger.info("Successfully established UPnP mapping for %s:%i on external port %i",
internalClient, internalPort, externalPort)
return resp return resp
def DeletePortMapping(self, externalPort, protocol): def DeletePortMapping(self, externalPort, protocol):
from debug import logger """Delete UPnP port mapping"""
resp = self.soapRequest(self.upnp_schema + ':1', 'DeletePortMapping', [ resp = self.soapRequest(self.upnp_schema + ':1', 'DeletePortMapping', [
('NewRemoteHost', ''), ('NewRemoteHost', ''),
('NewExternalPort', str(externalPort)), ('NewExternalPort', str(externalPort)),
@ -139,14 +165,15 @@ class Router:
return resp return resp
def GetExternalIPAddress(self): def GetExternalIPAddress(self):
from xml.dom.minidom import parseString """Get the external address"""
resp = self.soapRequest(self.upnp_schema + ':1', 'GetExternalIPAddress') resp = self.soapRequest(self.upnp_schema + ':1', 'GetExternalIPAddress')
dom = parseString(resp) dom = parseString(resp)
return dom.getElementsByTagName('NewExternalIPAddress')[0].childNodes[0].data return dom.getElementsByTagName('NewExternalIPAddress')[0].childNodes[0].data
def soapRequest(self, service, action, arguments=None): def soapRequest(self, service, action, arguments=None):
from xml.dom.minidom import parseString """Make a request to a router"""
from debug import logger
conn = httplib.HTTPConnection(self.routerPath.hostname, self.routerPath.port) conn = httplib.HTTPConnection(self.routerPath.hostname, self.routerPath.port)
conn.request( conn.request(
'POST', 'POST',
@ -164,21 +191,24 @@ class Router:
try: try:
dom = parseString(respData) dom = parseString(respData)
errinfo = dom.getElementsByTagName('errorDescription') errinfo = dom.getElementsByTagName('errorDescription')
if len(errinfo) > 0: if errinfo:
logger.error("UPnP error: %s", respData) logger.error("UPnP error: %s", respData)
raise UPnPError(errinfo[0].childNodes[0].data) raise UPnPError(errinfo[0].childNodes[0].data)
except: except:
raise UPnPError("Unable to parse SOAP error: %s" %(respData)) raise UPnPError("Unable to parse SOAP error: %s" % (respData))
return resp return resp
class uPnPThread(threading.Thread, StoppableThread): class uPnPThread(threading.Thread, StoppableThread):
"""Start a thread to handle UPnP activity"""
SSDP_ADDR = "239.255.255.250" SSDP_ADDR = "239.255.255.250"
GOOGLE_DNS = "8.8.8.8" GOOGLE_DNS = "8.8.8.8"
SSDP_PORT = 1900 SSDP_PORT = 1900
SSDP_MX = 2 SSDP_MX = 2
SSDP_ST = "urn:schemas-upnp-org:device:InternetGatewayDevice:1" SSDP_ST = "urn:schemas-upnp-org:device:InternetGatewayDevice:1"
def __init__ (self): def __init__(self):
threading.Thread.__init__(self, name="uPnPThread") threading.Thread.__init__(self, name="uPnPThread")
try: try:
self.extPort = BMConfigParser().getint('bitmessagesettings', 'extport') self.extPort = BMConfigParser().getint('bitmessagesettings', 'extport')
@ -194,7 +224,7 @@ class uPnPThread(threading.Thread, StoppableThread):
self.initStop() self.initStop()
def run(self): def run(self):
from debug import logger """Start the thread to manage UPnP activity"""
logger.debug("Starting UPnP thread") logger.debug("Starting UPnP thread")
logger.debug("Local IP: %s", self.localIP) logger.debug("Local IP: %s", self.localIP)
@ -209,9 +239,11 @@ class uPnPThread(threading.Thread, StoppableThread):
if not bound: if not bound:
time.sleep(1) time.sleep(1)
# pylint: disable=attribute-defined-outside-init
self.localPort = BMConfigParser().getint('bitmessagesettings', 'port') self.localPort = BMConfigParser().getint('bitmessagesettings', 'port')
while state.shutdown == 0 and BMConfigParser().safeGetBoolean('bitmessagesettings', 'upnp'): while state.shutdown == 0 and BMConfigParser().safeGetBoolean('bitmessagesettings', 'upnp'):
if time.time() - lastSent > self.sendSleep and len(self.routers) == 0: if time.time() - lastSent > self.sendSleep and not self.routers:
try: try:
self.sendSearchRouter() self.sendSearchRouter()
except: except:
@ -219,7 +251,7 @@ class uPnPThread(threading.Thread, StoppableThread):
lastSent = time.time() lastSent = time.time()
try: try:
while state.shutdown == 0 and BMConfigParser().safeGetBoolean('bitmessagesettings', 'upnp'): while state.shutdown == 0 and BMConfigParser().safeGetBoolean('bitmessagesettings', 'upnp'):
resp,(ip,port) = self.sock.recvfrom(1000) resp, (ip, _) = self.sock.recvfrom(1000)
if resp is None: if resp is None:
continue continue
newRouter = Router(resp, ip) newRouter = Router(resp, ip)
@ -230,14 +262,11 @@ class uPnPThread(threading.Thread, StoppableThread):
logger.debug("Found UPnP router at %s", ip) logger.debug("Found UPnP router at %s", ip)
self.routers.append(newRouter) self.routers.append(newRouter)
self.createPortMapping(newRouter) self.createPortMapping(newRouter)
queues.UISignalQueue.put(('updateStatusBar', tr._translate("MainWindow",'UPnP port mapping established on port %1').arg(str(self.extPort)))) queues.UISignalQueue.put(('updateStatusBar', tr._translate(
# retry connections so that the submitted port is refreshed "MainWindow", 'UPnP port mapping established on port %1'
with shared.alreadyAttemptedConnectionsListLock: ).arg(str(self.extPort))))
shared.alreadyAttemptedConnectionsList.clear()
shared.alreadyAttemptedConnectionsListResetTime = int(
time.time())
break break
except socket.timeout as e: except socket.timeout:
pass pass
except: except:
logger.error("Failure running UPnP router search.", exc_info=True) logger.error("Failure running UPnP router search.", exc_info=True)
@ -259,17 +288,20 @@ class uPnPThread(threading.Thread, StoppableThread):
self.deletePortMapping(router) self.deletePortMapping(router)
shared.extPort = None shared.extPort = None
if deleted: if deleted:
queues.UISignalQueue.put(('updateStatusBar', tr._translate("MainWindow",'UPnP port mapping removed'))) queues.UISignalQueue.put(('updateStatusBar', tr._translate("MainWindow", 'UPnP port mapping removed')))
logger.debug("UPnP thread done") logger.debug("UPnP thread done")
def getLocalIP(self): def getLocalIP(self):
"""Get the local IP of the node"""
s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM) s = socket.socket(socket.AF_INET, socket.SOCK_DGRAM)
s.setsockopt(socket.SOL_SOCKET, socket.SO_BROADCAST, 1) s.setsockopt(socket.SOL_SOCKET, socket.SO_BROADCAST, 1)
s.connect((uPnPThread.GOOGLE_DNS, 1)) s.connect((uPnPThread.GOOGLE_DNS, 1))
return s.getsockname()[0] return s.getsockname()[0]
def sendSearchRouter(self): def sendSearchRouter(self):
from debug import logger """Querying for UPnP services"""
ssdpRequest = "M-SEARCH * HTTP/1.1\r\n" + \ ssdpRequest = "M-SEARCH * HTTP/1.1\r\n" + \
"HOST: %s:%d\r\n" % (uPnPThread.SSDP_ADDR, uPnPThread.SSDP_PORT) + \ "HOST: %s:%d\r\n" % (uPnPThread.SSDP_ADDR, uPnPThread.SSDP_PORT) + \
"MAN: \"ssdp:discover\"\r\n" + \ "MAN: \"ssdp:discover\"\r\n" + \
@ -283,11 +315,10 @@ class uPnPThread(threading.Thread, StoppableThread):
logger.exception("UPnP send query failed") logger.exception("UPnP send query failed")
def createPortMapping(self, router): def createPortMapping(self, router):
from debug import logger """Add a port mapping"""
for i in range(50): for i in range(50):
try: try:
routerIP, = unpack('>I', socket.inet_aton(router.address))
localIP = self.localIP localIP = self.localIP
if i == 0: if i == 0:
extPort = self.localPort # try same port first extPort = self.localPort # try same port first
@ -295,7 +326,12 @@ class uPnPThread(threading.Thread, StoppableThread):
extPort = self.extPort # try external port from last time next extPort = self.extPort # try external port from last time next
else: else:
extPort = randint(32767, 65535) extPort = randint(32767, 65535)
logger.debug("Attempt %i, requesting UPnP mapping for %s:%i on external port %i", i, localIP, self.localPort, extPort) logger.debug(
"Attempt %i, requesting UPnP mapping for %s:%i on external port %i",
i,
localIP,
self.localPort,
extPort)
router.AddPortMapping(extPort, self.localPort, localIP, 'TCP', 'BitMessage') router.AddPortMapping(extPort, self.localPort, localIP, 'TCP', 'BitMessage')
shared.extPort = extPort shared.extPort = extPort
self.extPort = extPort self.extPort = extPort
@ -306,7 +342,5 @@ class uPnPThread(threading.Thread, StoppableThread):
logger.debug("UPnP error: ", exc_info=True) logger.debug("UPnP error: ", exc_info=True)
def deletePortMapping(self, router): def deletePortMapping(self, router):
"""Delete a port mapping"""
router.DeletePortMapping(router.extPort, 'TCP') router.DeletePortMapping(router.extPort, 'TCP')