- asyncore is now on by default
- inv announcements implemented
- bandwidth limit implemented / fixed
- stats on download / upload speed now work
- make prints into logger
- limit knownNodes to 20k as it was before
- green light fixed
- other minor fixes
- Network status UI works but current speed isn't implemented yet
- Track per connection and global transferred bytes
- Add locking to write queue so that other threads can put stuff
there
- send ping on timeout (instead of closing the connection)
- implement open port checker (untested, never triggered yet)
- error handling on IO
- bmconfigpaser.py now allows to put default values for a specific
option in the file
- addresses as sections are now detected by "BM-" rather than
just ignoring bitmessagesettings. There can now be other sections
with a cleaner config file
- immediately return from initCL() if numpy or pyopencl is unevailable
(no ImportError because of resetPoW() call)
- use glob to find C extension even if it named like
`bitmsghash.x86_64-linux-gnu.so`
If user chooses to show the Settings dialog:
- activate the "Network Settings" tab
- remove option 'dontconnect' if settings have been saved
- replace PendingDownload singleton dict with a Queue
- total memory and CPU requirements should be reduced
- get rid of somObjectsOfWhichThisRemoteNodeIsAlearedyAware. It has very
little practicle effect and only uses memory
- TTL to chans shouldn't be too low so the UI gives a feedback
- warning when sending wouldn either require a lot of refactoring or
wouldn't have good usability
- don't do subprocess in SafeHTMLParser, it doesn't work in frozen mode
and an attempt to fix it would take too much refactoring and I'm not
even sure it would work
- instead, make it handle broken unicode correctly
- I think the previous reports of freezes were caused by trying to
interpret data as unicode, causing a crash
- it does about 1MB/s on my machine, so a timeout is not a big problem
- "new" folder consistently appears in chans and "All accounts"
- "Sent" message list sorting fix
- When editing a label, keys.dat is saved and the lineEdit completer
is updated
- addressbook is updated when adding/deleting a new chan
- saveKnownNodes replaced the repeated pickle.dump
- with knownNodesLock instead of acquire/release
- outgoingSynSender had an unnecessary loop during shutdown causing
excessive CPU usage / GUI freezing
- networkDefaultProofOfWorkNonceTrialsPerByte and
networkDefaultPayloadLengthExtraBytes cyclic import fix
- PyBitmessage should launch now when there's no keys.dat
- rearranged code to reduce cyclic dependencies
- doCleanShutdown is separated in shutdown.py
- shared queues are separated in queues.py
- some default values were moved to defaults.py
- knownnodes partially moved to knownnodes.py
- Missing renamed to PendingDownload
- PendingDownload now only retries 3 times rather than 6 to dowload an
object
- Added PendingUpload, replacing invQueueSize
- PendingUpload has both the "len" method (number of objects not
uploaded) as well as "progress" method, which is a float from 0
(nothing done) to 1 (all uploaded) which considers not only objects
but also how many nodes they are uploaded to
- PendingUpload tracks when the object is successfully uploaded to the
remote node instead of just adding an arbitrary time after they have
been send the corresponding "inv"
- Network status tab's "Objects to be synced" shows the sum of
PendingUpload and PendingDownload sizes
- moved logic into a Missing singleton
- shouldn't try to download duplicates anymore, only requests a hash
once every 5 minutes and not from the same host
- removed obsoleted variables
- the "Objects to be synced" in the Network tab should now be correct
- removed some checks which aren't necessary anymore in my opinion
- fix missing self in Throttle (thanks landscape.io)
- fixes errors introduced in the earlier refactoring
- more variables moved to state.py
- path finding functions moved to paths.py
- remembers IPv6 network unreachable (in the future can be used to skip
IPv6 for a while)
- got rid of shared config parser and made it into a singleton
- refactored safeConfigGetBoolean as a method of the config singleton
- refactored safeConfigGet as a method of the config singleton
- moved softwareVersion from shared.py into version.py
- moved some global variables from shared.py into state.py
- moved some protocol-specific functions from shared.py into protocol.py
- minor refactoring, made it into singleton instead of a shared global
variable. This makes it a little bit cleaner and moves the class into
a separate file
- removed duplicate inventory locking
- renamed singleton.py to singleinstance.py (this is the code that
ensures only one instance of PyBitmessage runs at the same time)
- Linux users often don't know that the C PoW is available and complain
it's slow. This will try to build it, and adds availability
notification in the status bar
- also, the updateStatusBar signal now allows emphasised notifications,
which will remain visible for a longer period of time and also
reappear if a status change happened in the meantime
- when you have multiple OpenCL drivers at the same time, e.g. intel and
nvidia, they won't mix leading to crashes. This patch makes it
possible to select which driver to use by listing the available
vendors
- refactored to use the .ui file
- input logic change, address is always optional
- interactive input validation
- runs asynchronously to the main window
- address generator thread can now validate chans in addition to just
adding them
- a user report indicated there is confusion about address error
messages. He/she thought it refers to the sender address, however it
refers to the recipient address. This makes it more clear
- this has been tested on Windows as well, and has been cleaned up.
There is now a permanent parser thread, and it restarts when the
parsing takes more than 1 second
- Fixes#900
- while 448ceaa74c fixed slow rendering on
windows, there was still a bug where overly long messages caused
freezeing of the hyperlink regexp parser, which appears to happen on
all platforms. Maybe it's a freeze, maybe it just takes too long. This
patch aborts the regexp parser after 1 second and simply displays the
message without hyperlinks being clickable. This doesn't affect HTML
mode because there the links are kept as they are
- Fixes#900
- some messages (e.g. some long messages on Windows, or binary data)
cause an excessive amount of time in rendering the body. This
change is base on a workaround I found at
http://www.qtcentre.org/threads/8188-bug-setLineWrapMode
- most status messages are transient, so they are now only displayed for
10 seconds
- when trying to quit while disconnected or not fully synced, a
three-choice message box now appears: Yes for waiting, No for
closing anyway, and Cancel for aborting the shutdown procedure
- this copyright character has been plaguing pylupdate4 parser and
multiple unsuccessful attempts have been made and then reverted.
Replaced with a HTML entity, hopefully this will finally fix it.
- fixes "fast python" (multiprocessing) PoW
- python PoW (both slow and fast) interruptible on *NIX
- signal handler should handle multiple processes and threads correctly
(only tested on Linux)
- popul window asking whether to interrupt PoW when quitting QT GUI
- PoW status in "sent" folder fixes and now also displays broadcast
status which didn't exist before
- Fixes#894
- namecoin lookup now also includes name of the record in the recipient
field
- namecoin lookups now support multiple semicolon-separated
recipients like the other recipient-related functions. If there are
multiple recipients, namecoin lookup will look up the last entry on
the line, for example if you have "a; b; c" in the recipient line,
it will lookup "c"
Two file merge conflicts, __init__.py and upnp.py, were not resolved
correctly by the automatic resolving (probably because the affected code
was written by other people and I merged them into mailchuck fork). This
changes it to the same code that is in the mailchuck fork)
On Windows, the encoding was always the default windows encoding and
didn't change when you use a language in BM that required a different
encoding. This affected mainly date & time in the received column and
the startup info on the network status tab.
The plural/paucal form support was not compatible with pylupdate4, it
didn't correctly parse the 3-argument calls to translate.
This fixes it, and updates the sources accordingly.
Some parts of strings did not use the proper locale. For example, date
and time strings was always output with the US locale. This fixes it.
There are still some cases where localisation is not implemented, and
could be changed from str(string) to locale.str(string).
- it shows that it needs to wait for PoW to finish
- it waits a bit for new objects to be distributed
- it displays a better progress indicator in the status bar
Previously, people who don't understand how PyBitmessage works sometimes
shut it down immediately after they wrote a message. This would have
caused the message to be stuck in the queue locally and not sent. Now,
it will indicate that the PoW still needs to work, and it will wait a
bit longer so that the message can spread. It's not a completely correct
approach, because it does not know whether the message was really
retrieved after the "inv" notification was sent.
Now only in status bar and no more popup window.
Previously, it only showed once until a restart, but now it shows every
time it detects a new version online. Since it does not show a popup
window it's not a big deal.
The language combo box is generated dynamically from the list of
available translations in the translations directory. This allows the
users to add their own translations without having to change the code.
Added a RetranslateMixin. Since PyQT does not support automated language
changes of UI files (like the C++ QT does), this implements something
similar. It assumes that the UI file has the same name as the class, but
lowercase.
Added RetraslateMixin to the new blacklist and networkstatus interfaces.
The quick navigation key disrupted keybindings with keyboard modifiers,
like Ctrl-C for copy. This restricts the quick navigation only where no
keyboard modifiers are active.
Fixes#184
- delete key now works when message body is focused as well
- N for next message (down)
- P for previous message (up)
- R for reply
- C for compose
- F for find
- Find is now dynamic if the search text is least 3 characters long
Fixes Bitmessage#655
Addresses #155
Rows are deleted from a message list in multiple places, and this is an
attempt to refactor it so that it is done in one function. It's not used
anywhere yet.
MessageView does not currently load external resources (QTextBrowser by
default interprets all external resources as local file names and tries
to load them like that. This can, in the future, be implemented. For
example, if SOCKS (Tor) is used, the resource could be loaded through
the SOCKS too.
This commit is a skeleton for it that does not actually do anything and
can be filled with an implementation that does the loading.
Email addresses and URIs are now clickable when viewing a message in
plain text mode. Clicking an email address moves to the Send tab, while
clicking an URI has the same result as clicking an URI in html mode, it
will ask for confirmation before opening it in external handler.
HTML parser wasn't correctly handling img tags.
Now it also by defaults disabled external schemas to prevent
deanonymisation (even though the renderer actually doesn't support
external schemas at the moment)
Addresses #178
Editing of blacklist labels affected the rerendering, because it emits
the changed signal too, and it caused an exception because the address
field was missing at that time. This works around both.
If you change, add or remove an item in a treewidget or addressbook,
messagelists will now autoupdate labels, and sender comboboxes will also
update if applicable.
Fixes#69
Message compose sometimes misinterpreted quoted message as HTML, causing
rendering screwups. Since we don't support HTML composing, we will treat
all quoted messages as plain text.
Zooming in message body view / compose works in single steps
irrespective of wheel sensitivity, and info about zoom level is
displayed in percent rather than font pixel size.
Flood mitigation was done both in the ObjectProcessorQueue as well as
receiveData threads. This patch removes the mitigation in receiveData
threads and cleans up the one in the ObjectProcessorQueue
- subject on replies was not parsed correctly (or should I say was
parsed more than necessary)
- unicode can handle invalid characters without needing a special
function
Fixes#164
Peter Šurda
Dmitri Bogomolov
Justin Ramos
Marius Ghita
mailchuck
mirrorwish
mirrorwish