Commit Graph

2618 Commits

Author SHA1 Message Date
34084bbc80
Total setup.py cleanup and simple script installation 2017-02-28 15:51:49 +02:00
e7506b2ac0
Fix tracking of already attempted connections
- it didn't delete the entries correctly, resulting in outgoing syn
  sender deadlocking
2017-02-28 09:43:09 +01:00
f5b430b567
Excessive random seeding
- outgoing thread was calling a seed reinit before each peer selection.
  This is not necessary, just init when the thread starts
2017-02-28 09:40:28 +01:00
42246f83ef
Reset connection list on UPnP
- reset the already attempted connection list after UPnP port mapping is
  established. This allows to resubmit externally reachable port
2017-02-28 01:15:49 +01:00
59e1739136
Revert duplicate IP treatment for bootstrap
- bootstrap provider mode shouldn't accept multiple connections from a
  single IP after all, it creates problems
2017-02-28 00:20:34 +01:00
d0b0d15dc3
Fix potential deadlock
- alreadyAttemptedConnectionsListLock probably deadlocked
- removed locking where unnecessary and rewrote the important part with
  proper locking
2017-02-28 00:12:49 +01:00
af8957ed72
Typo in the second most recent commit 2017-02-27 23:37:15 +01:00
d9d2deee25
Typo in last commit 2017-02-27 23:35:48 +01:00
339e375958
Bootstrap provider mode and minor knownNodes changes
- if knownNodes grows to 20000, instead of ignoring new nodes, forget
  the 1000 oldest ones
- drop connection after sendaddr if too many connections, even if it's
  an outbound one
- if maximum total connections are lower than maximum outbound
  connections, active bootstrap provider mode
- in this mode, check all addresses received before announcing them
- so basically it only annouces those addresses it successfully
  connected to
2017-02-27 23:31:12 +01:00
5d068ec84a
Unnecessary locking
- there was a sleep inside a lock
2017-02-27 23:30:31 +01:00
741ac5ca05
UPnP recommendation notification fixes
- notify also if no connections and no change
2017-02-27 16:18:22 +01:00
ff786725ed
Typo
- UPnP / connectivity recommendation was active when on proxy rather
  than without
2017-02-27 16:12:19 +01:00
e15d9e3e03
Save UPnP externa port after creating mapping 2017-02-27 15:55:59 +01:00
cd0972c0f3
Recommend enabling UPnP on network problems
- it looks like there aren't enough listening nodes
- if connection is dropped, notify non-proxy users about the UPnP option
2017-02-27 15:30:19 +01:00
124b321b8c
Less verbose error handling
- if socket sending results in EHOSTUNREACH or ETIMEDOUT, don't show
  backtrace
2017-02-27 15:27:46 +01:00
484d4abb3c
Frozen mode message type static
- I can't get the dynamic loading to work on OSX in frozen mode
- I think that if someone wants to build a frozen executable with custom
  messagetypes modules, he can edit the file
- so now it lists the existing types manually (for frozen mode only)
2017-02-26 20:50:06 +01:00
511b89ebbe
PoW Worker should wait for sql thread to init
- I think this was causing freezing queue on launch if not empty
- I can't reproduce the bug anymore
2017-02-26 20:44:56 +01:00
d8301ff512
Less verbose connection error reporting
- don't print tracebacks on normal (timeout/reset) errors
2017-02-26 20:29:07 +01:00
cff1af1b4f
Subscription wrong tab
- when subscribing from addressbook, it switched to blacklist tab
  instead of subscriptions
2017-02-26 20:03:47 +01:00
88658b074e
Socks proxy hostname resolving error handling
- if resolving fails, it wasn't handled
2017-02-26 20:03:14 +01:00
7ebe837eb0
Make some network parameters configurable
- maxtotalconnections = maximum number of total full connections
  (incoming + outgoing) the node will allow. Default 200 as it was.
- maxbootstrapconnections = number of additional (to total) connection
  that will act in bootstrap mode, closing after sending the list of
  addresses. Default 20 as it was.
- maxaddrperstreamsend = initial address list maximum size, per
  participating stream. Default 500. Child streams get half. The
  response is chunked into pieces of max. 1000 addresses as that's the
  protocol limit.
2017-02-26 17:46:02 +01:00
0fa0599cd4
IPv4 listen socket fix
- on OpenBSD, you can't have a socket that supports both IPv4 and IPv6.
  This allows handling for this error, and then it will try IPv4 only,
  just like for other similar errors.
2017-02-26 12:55:43 +01:00
191650f5a4
Typos
- previous commit contained typos
2017-02-26 12:52:28 +01:00
b1b0c46555
Improve exception handling
- there were reports of errors in FreeBSD (I could only reproduce some)
  and Gentoo without IPv4 support (I don't have a VM for testing ready)
- adds an exception handler for double task_done in case sender thread
  has to close prematurely (I saw this triggered on FreeBSD 11)
- listening socket opening error handler was broken (triggered if you
  can't open a socket with both IPv4 and IPv6 support)
- error handler for socket.accept. Reported on FreeBSD 10.3
- fixes #854
2017-02-26 12:42:18 +01:00
74c85b4a9e
Retransmit timing changes
- makes it behave more like in the description
- partial for #847
2017-02-25 23:40:37 +01:00
7ef91bd607
Changed Makefile to use CXX instead of g++
- is more standardised
- closes #882
2017-02-25 22:33:31 +01:00
Justin Ramos
b50198afb5
changes needed to get current code to run 2017-02-25 00:06:04 -06:00
PyBitmessage Translations
93c881172e
Auto-updated language ja from transifex 2017-02-23 15:11:17 +01:00
PyBitmessage Translations
30952f91cf
Auto-updated language ru from transifex 2017-02-22 17:11:30 +01:00
a6dbb1e37e
Less timestamp penalty for inbound connections
- was over 2 days, but PyBM will only spread those with more recent than
  3 hours. So it's now set to 2 hours
2017-02-22 16:18:08 +01:00
d7076626c2
TTL label is in red and warning when too low
- TTL to chans shouldn't be too low so the UI gives a feedback
- warning when sending wouldn either require a lot of refactoring or
  wouldn't have good usability
2017-02-22 16:07:39 +01:00
e9899743ef
Typos, formatting, obsolete imports 2017-02-22 15:09:36 +01:00
PyBitmessage Translations
71ca2a761b
Auto-updated language pl from transifex 2017-02-22 12:53:17 +01:00
PyBitmessage Translations
fa1fc2a031
Auto-updated language eo from transifex 2017-02-22 12:36:09 +01:00
af1bed9034
MessageView Unicode HTML fix
- the HTML on/off click label should be unicode rather than str
2017-02-22 12:30:14 +01:00
57a3c35299
Context menu on messages to deleted accounts
- messages from deleted chans still stay in global inbox
- this crated problems with account detection
- created NoAccount class for such accounts
2017-02-22 12:15:52 +01:00
PyBitmessage Translations
72ed3e340f
Auto-updated language sk from transifex 2017-02-22 11:29:18 +01:00
PyBitmessage Translations
bda5b02118
Auto-updated language de from transifex 2017-02-22 11:27:17 +01:00
PyBitmessage Translations
56384a353a
Auto-updated language ja from transifex 2017-02-22 11:18:16 +01:00
6062277d60
Rename configparser.py to bmconfigparser.py
- it was causing problems with py2app because the source of python's own
  CongigParser is also configparser.py
2017-02-22 09:34:54 +01:00
266d8eba1f
SafeHTMLParser unicode / subprocess
- don't do subprocess in SafeHTMLParser, it doesn't work in frozen mode
  and an attempt to fix it would take too much refactoring and I'm not
  even sure it would work
- instead, make it handle broken unicode correctly
- I think the previous reports of freezes were caused by trying to
  interpret data as unicode, causing a crash
- it does about 1MB/s on my machine, so a timeout is not a big problem
2017-02-22 09:05:05 +01:00
Justin Ramos
fd95f8f519
allowing for max outbound connection configuration
Signed-off-by: Justin Ramos <justin.ramos@gmail.com>
2017-02-21 16:28:54 -06:00
c8429365e3
Typo
- typo in last commit
2017-02-21 10:25:59 +01:00
fef6126a74
Error handling improvement in sendDataThread
- don't uncecessarily report EPIPE as a big error, just close the
  connection
2017-02-21 09:58:28 +01:00
ea9f10a8bb
Simplify and fix list of addresses to send
- it didn't always send the maximum possible amount
- it probably was slow
2017-02-20 22:32:49 +01:00
579ba49f38
Deamon mode without PyQt4
- daemon mode shouldn't require PyQt4
2017-02-20 20:53:50 +01:00
9c4366ffa6
Don't report direct network errors as proxy errors
- last commit reported network errors that happened when proxy was off
  as network errors
2017-02-20 12:34:55 +01:00
ea448c4496
SOCKS error handler winsock compatibility
- now it can detect WSA errors as well, allowing more accurate error
  feedback
2017-02-20 12:15:51 +01:00
46a2c361de
Building and msgpack fixes
- Makefile typo
- pyinstaller rewritten and fixed including and initialisation of
  messagetypes
- msgpack decoding new message display fix
2017-02-19 19:48:45 +01:00
67c8966a21
Windows compatibility fixes
- spec file for pyinstaller detects architecture (32 or 64bit)
- spec file uses os.path.join
- spec file creates and adds the list of messagetypes
- added MinGW/MSyS support in Makefile
- separate Makefile.msvc for MCVC
- bitmsghash.cpp minor adjustments to build also on MSVC/MinGW
- if frozen mode, messagetypes loads the list of files from a text file
  generated during archive building rather than from a directory
2017-02-19 14:48:53 +01:00
a95f4aa255
LibreSSL compatibility
- code distinguishes between OpenSSL 1.1.x and LibreSSL and works with
  both
2017-02-18 17:22:17 +01:00
75f715bfe4
BSD compatibility
- separate Makefile for BSD make
- auto-compile will detect BSD and pass the correct parameters to make
- C PoW builds on OpenBSD and detects number of cores
2017-02-18 17:20:09 +01:00
6c907e2046
Windows socket typo 2017-02-17 21:14:39 +01:00
f499a3b1d8
Typo 2017-02-14 13:57:20 +01:00
f94b2d2d4b
Windows compatibility fixes
- there is no errno.WSAEAGAIN, only errno.WSAEWOULDBLOCK
2017-02-14 01:38:58 +01:00
a4b1a781ce
Minor UI fixes
- "new" folder consistently appears in chans and "All accounts"
- "Sent" message list sorting fix
- When editing a label, keys.dat is saved and the lineEdit completer
  is updated
- addressbook is updated when adding/deleting a new chan
2017-02-14 01:35:32 +01:00
965f3548ac
Depends checking updates
- checks for msgpack
- can distinguish OS and make a recommendation with respect to the
  relevant package manager
2017-02-14 01:33:16 +01:00
d8ae44f9ee
Obsolete imports, missing exception type 2017-02-09 21:04:07 +01:00
c778b81427
knownNodes refactoring and shutdown fixes
- saveKnownNodes replaced the repeated pickle.dump
- with knownNodesLock instead of acquire/release
- outgoingSynSender had an unnecessary loop during shutdown causing
  excessive CPU usage / GUI freezing
2017-02-09 11:53:33 +01:00
e664746f04
More knownNodes init
- also init children if they are missing
2017-02-08 20:52:18 +01:00
b0539f5cb4
SSL handshake fewer errors
- don't unnecessarily raise exceptions if SSL handshake fails
2017-02-08 20:49:14 +01:00
35a712d11d
KnownNodes missing init
- init knownnodes when connecting to a stream
2017-02-08 20:48:22 +01:00
157881bc63
Cyclic import fix
- networkDefaultProofOfWorkNonceTrialsPerByte and
  networkDefaultPayloadLengthExtraBytes cyclic import fix
- PyBitmessage should launch now when there's no keys.dat
2017-02-08 20:37:42 +01:00
2cc4435cfc
Imports, typos, syntax errors
- remove obsolete imports
- add missing imports
- fix typos
- fix syntax errors
- thanks to landscape.io for report
2017-02-08 14:19:02 +01:00
59f3a2fbe7
Reduce cyclic dependencies
- rearranged code to reduce cyclic dependencies
- doCleanShutdown is separated in shutdown.py
- shared queues are separated in queues.py
- some default values were moved to defaults.py
- knownnodes partially moved to knownnodes.py
2017-02-08 13:41:56 +01:00
7da36eccbd
Signal sender threads to close on shutdown
- when shutdown is running, add a shutdown command to the queues of all
  sender threads
2017-02-07 20:47:28 +01:00
a381f75b4b
Git head information in version
- About dialog now shows the git head
- git head check has been improved to point to the head rather than the
  previous commit
2017-02-07 20:46:30 +01:00
2c72b337c1
Typos and formatting 2017-02-07 20:09:11 +01:00
07722fb606
Node negotiation error handling
- complete the version and SSL handshake first, and only then feed
  errors into the stream and close connection
- this allows more accurate error handling on both sides
- also the timeOffset error trigger is now more accurate, but requires
  more nodes to upgrade
2017-02-07 19:38:52 +01:00
8515f9a9fc
Set SSL socket to blocking
- otherwise the error handling gets too complicated
2017-02-07 16:42:02 +01:00
6b65dfeeec
MarkAllUnread sqlite argument limit
- shouldn't crash anymore if there are too many messages to mark read
2017-02-07 16:38:02 +01:00
413419c858
Timeout handling and ping
- timeouts after the connection is established will trigger a ping
- previously they were handled as unrecoverable errors
2017-02-07 16:06:24 +01:00
15c620dcc2
SSL socket blocking error handling 2017-02-07 13:00:24 +01:00
ddc0ca5ede
Retry for certain non-blocking operations
- sometimes on read, EWOULDBLOCK is returned. It should retry. A timeout
  is handled separately
2017-02-06 19:41:25 +01:00
61770ba89a
Typo 2017-02-06 19:34:38 +01:00
f6bdad18a3
Improved stream handling
- version command sends list of all participating streams
- biginv sends lists of hosts for all streams the peer wants (plus
  immediate children)
- objects will spread to all peers that advertise the associated stream
- please note these are just network subsystem adjustments, streams
  aren't actually usable yet
2017-02-06 17:47:05 +01:00
79b566a907
Fix bitflags in version packet 2017-02-06 17:39:42 +01:00
e434825bb2
Pending download counter fix
- handles expired objects better
- counts objects that failed download more accurately
2017-02-06 11:02:03 +01:00
23fcf2cdec
SSL handshake python version compatibility
- error handling should now work with < 2.7.9
2017-02-03 10:05:35 +01:00
c979481564
Unhandled missing peer 2017-02-03 09:43:47 +01:00
ba130e03e5
Network subsystem freezing fixes
- queues were too short
- some error handling was missing
- remove nonblocking repeats in receive data thread
- singleCleaner shouldn't wait unnecessarily
2017-02-02 15:52:32 +01:00
4f70eaa01f
Fix curses mode 2017-02-02 15:48:56 +01:00
f3849eeb48
Unused imports, problematic variable names 2017-01-19 20:04:45 +01:00
01a9124b7d
Less verbose SSL handshake reporting
- if SSL handshake fails, we don't need to stack trace because we know
  where it's happening. Only report the error string.
2017-01-19 19:52:54 +01:00
5828021903
Fix false error about wrong stream
- sendinv and sendaddress are sometimes being sent to connections that
  haven't been established yet, resulting in complaints about stream
  mismatch. The error should only be displayed once the connection has
  been established and the remote node provides its stream number
2017-01-19 19:50:40 +01:00
5ae1327edc
Download/upload shutdown fixes
- Missing renamed to PendingDownload
- PendingDownload now only retries 3 times rather than 6 to dowload an
  object
- Added PendingUpload, replacing invQueueSize
- PendingUpload has both the "len" method (number of objects not
  uploaded) as well as "progress" method, which is a float from 0
  (nothing done) to 1 (all uploaded) which considers not only objects
  but also how many nodes they are uploaded to
- PendingUpload tracks when the object is successfully uploaded to the
  remote node instead of just adding an arbitrary time after they have
  been send the corresponding "inv"
- Network status tab's "Objects to be synced" shows the sum of
  PendingUpload and PendingDownload sizes
2017-01-19 19:48:12 +01:00
5708a38be0
Fix sending messages crashing 2017-01-17 01:07:39 +01:00
9197c425d2
Object requesting fix 2017-01-17 00:32:05 +01:00
9ed59dd825
Shutdown procedure cleanup 2017-01-16 23:38:18 +01:00
ca8550a206
Don't send requests for 0 objects 2017-01-16 23:37:25 +01:00
749bb628c0
Typo 2017-01-16 23:37:03 +01:00
4f920fe641
Fix infinite loop 2017-01-16 23:17:56 +01:00
d652dc864d
Downloading fixes
- able to request more objects with one command
- fixes to logic and error handling
2017-01-16 19:36:58 +01:00
9f89df6d1c
Expire objects that we're unable to receive
- sometimes a node would send an "inv" about an object but then not
  provide it when requested. This could be that it expired in the
  meantime or it was an attack or a bug. This patch will forget that the
  object exists if was requested too many times and not received.
2017-01-16 17:08:47 +01:00
ca6bc9981c
Better tracking in downloading objects
- remember what was requested from which node
- remember if it was received
- re-request object if we haven't received any new object for more than
  a minute
2017-01-16 15:17:23 +01:00
8dfa0faca9
More objects to be downloaded fixes 2017-01-15 23:10:44 +01:00
12205ee7ba
More fixes in objects to be downloaded 2017-01-15 23:07:11 +01:00
bd1aead46e
More fixes for objects to be downloaded 2017-01-15 22:41:12 +01:00
d04c0e78e4
Better handling of pending downloading objects 2017-01-15 22:36:12 +01:00
b750e67bfb
Handle exception in iterator 2017-01-15 22:25:09 +01:00
805f72e098
Make objects to be send stoppable if not empty 2017-01-15 22:21:19 +01:00
94f0bdc731
Objects to be downloaded optimising
- treat requested but never arrived objects as expired. This is how it
  worked before the refactoring. Without this, the list won't go to
  zero.
2017-01-15 22:01:10 +01:00
79893fdc23
Performance tuning objects to be downloaded
- rely on dict quasi-random order instead of an additional shuffle
- request an object once per minute
- stop check after count objects have been found
2017-01-15 20:47:33 +01:00
dbe15d0b99
Objects to be downloaded fixes
- tries to avoid calling senddata it it would block receiveDataThread,
  allowing fore more asynchronous operation
- request objects in chunks of 100 (CPU performance optimisation)
2017-01-15 19:50:28 +01:00
f079ff5b99
Refactor objects to be downloaded
- moved logic into a Missing singleton
- shouldn't try to download duplicates anymore, only requests a hash
  once every 5 minutes and not from the same host
- removed obsoleted variables
- the "Objects to be synced" in the Network tab should now be correct
- removed some checks which aren't necessary anymore in my opinion
- fix missing self in Throttle (thanks landscape.io)
2017-01-15 19:21:24 +01:00
6d2a75bfc9
Transfer speed improvements
- send buffer to send multiple commands in one TCP packet
- recv/send operation size now based on bandwith limit
- send queue limited to 100 entries
- buffer getdata commands to fill send queue, instead of waiting for the
  data packet to arrive first (i.e. allow getdata to work asynchronously)
2017-01-15 15:08:03 +01:00
c3fef7bc4e
Syntax fix 2017-01-15 12:41:19 +01:00
9bf17b34d1
Remove obsolete imports and code
- landscape.io pointed out obsolete imports
- there is also an obsolete variable and lock in throttle.py
- add Exception type to BMConfigParser().save
2017-01-15 11:40:31 +01:00
8cb0953401
Moved writeKeysFile into configparser
- shared.writeKeysFile -> BMConfigParser().save
- makes it easier to get rid of circular imports
2017-01-15 10:50:02 +01:00
5ca8a52662
Typos, extra imports and similar
- pointed out by landscape.io
- also updated dev/ssltest.py to work the same way as the main program
2017-01-15 10:48:29 +01:00
689d697a40
Refactor bandwidth limit and speed calculator
- also fixes potential deadlocks
2017-01-14 23:21:00 +01:00
ad75552b5c
Move shutdown from shared.py to state.py 2017-01-14 23:20:15 +01:00
bcc7692e14
Add safeGetInt to BMConfigParser 2017-01-14 23:18:06 +01:00
02a7c59de8
OpenSSL 1.1.0 compatibility fixes
- part 2, continued from previous commit
2017-01-14 17:50:49 +01:00
59b5ac3a61
OpenSSL 1.1.0 compatibility fixes
- function check missed 1.1.0 release
- TLS didn't work with anonymous ciphers
2017-01-14 17:47:57 +01:00
fa2f87743e
SSL handshake fix
- SSL handshake would often fail, because verack packet was being sent
  at the same time as the do_handshake was executed in a different
  thread. This makes it so that do_handshake waits until verack is done
  sending.
- also minor modifications in SSLContext initialisation
2017-01-14 13:22:46 +01:00
cc4c07025b
Sending thread fix 2017-01-14 12:35:08 +01:00
8d278182a7
Indentation 2017-01-13 15:53:47 +01:00
93bdc3c800
Remove extra print 2017-01-13 12:32:26 +01:00
d0b1cbfe1f
Add current git HEAD info to support request 2017-01-13 12:29:14 +01:00
5ae676f2ad
Minor support fix 2017-01-13 12:05:39 +01:00
6778d6046f
Add OpenSSL 1.1.0 compatibility
- thanks to Wolfgang Frisch <wfr@roembden.net>
2017-01-13 12:02:34 +01:00
59cf33c9a1
Remove obsolete import 2017-01-13 12:01:38 +01:00
65701e5997
neededPubkeys fix
- was still using shared.neededPubkeys
2017-01-13 09:30:23 +01:00
ff8deebf60
Keep track of network protocol status 2017-01-12 19:18:56 +01:00
810e50a040
Fix minor issues
- landscape.io complained
- obsolete imports
- ciphers -> self.ciphers
2017-01-12 07:26:04 +01:00
2cf2188bc3
Object sending fix
- forgot to move broadcastToSendDataQueues in class_singleWorker.py
2017-01-12 07:22:34 +01:00
bd520a340f
Trustedpeer fix and more refactoring
- fixed trustedPeer (thanks to anonymous bug reporter)
- moved trustedPeer and Peer into state.py
2017-01-12 06:58:35 +01:00
e7470a4757
Remove leftover from debugging 2017-01-12 06:57:17 +01:00
5ceb920bd6
TLS tuning
- allow TLS > 1.0 with python >= 2.7.9
- tune ssl_context with python >= 2.7.9
2017-01-11 20:47:27 +01:00
c738d93056
Assorted fixes
- landscape.io was complaining, this fixes most easily fixable errors
2017-01-11 18:13:00 +01:00
cdcdf11d59
Missing import fix 2017-01-11 17:46:33 +01:00
fa0a3135e7
Fixes pointed out by landscape.io
- missing/wrong/obsolete imports
- logger formatting
2017-01-11 17:26:25 +01:00
ac348e4e6b
Fixes and refactoring
- fixes errors introduced in the earlier refactoring
- more variables moved to state.py
- path finding functions moved to paths.py
- remembers IPv6 network unreachable (in the future can be used to skip
  IPv6 for a while)
2017-01-11 17:00:00 +01:00
5d2bebae28
Add IPv4 multicast range to ignored addresses 2017-01-11 14:46:10 +01:00
8bcfe80ad0
Refactoring of config parser and shared.py
- got rid of shared config parser and made it into a singleton
- refactored safeConfigGetBoolean as a method of the config singleton
- refactored safeConfigGet as a method of the config singleton
- moved softwareVersion from shared.py into version.py
- moved some global variables from shared.py into state.py
- moved some protocol-specific functions from shared.py into protocol.py
2017-01-11 14:27:19 +01:00
085e335969
Proxy update (for the new network subsystem) 2017-01-10 21:22:22 +01:00
75090abaaf
Advanced dispatcher class
- generic class the new asyncore-based network subsystem that handles
  buffered data transfer
2017-01-10 21:20:49 +01:00
b4703ec6ce
Make objectHashHolder into a list
- was a dict
2017-01-10 21:19:57 +01:00
9c214b4a24
Inventory refactoring #2
- forgot to add api.py
2017-01-10 21:17:25 +01:00
e84b19613e
Inventory refactoring
- minor refactoring, made it into singleton instead of a shared global
  variable. This makes it a little bit cleaner and moves the class into
a separate file
- removed duplicate inventory locking
- renamed singleton.py to singleinstance.py (this is the code that
  ensures only one instance of PyBitmessage runs at the same time)
2017-01-10 21:15:35 +01:00
4f543e14c1
TLS handshake fix
- TLS handshake in python is apparently always asynchronous, so it needs
  proper handling of SSLWantReadError and SSLWantWriteError
- also adds a timeout and a proper shutdown if handshake fails
2017-01-07 23:42:07 +01:00
PyBitmessage Translations
541979a159
Auto-updated language fr from transifex 2017-01-05 19:24:45 +01:00
PyBitmessage Translations
9a26ce5be1
Auto-updated language ja from transifex 2016-12-16 10:18:29 +01:00
PyBitmessage Translations
e92161650b
Auto-updated language pl from transifex 2016-12-15 19:57:09 +01:00
PyBitmessage Translations
a87bfb8a82
Auto-updated language eo from transifex 2016-12-15 19:53:55 +01:00
PyBitmessage Translations
77d7dcbd2d
Auto-updated language sk from transifex 2016-12-15 16:33:21 +01:00
PyBitmessage Translations
3b896e69e7
Auto-updated language de from transifex 2016-12-15 16:26:50 +01:00
fefb959338
Notify if C PoW missing
- Linux users often don't know that the C PoW is available and complain
  it's slow. This will try to build it, and adds availability
  notification in the status bar
- also, the updateStatusBar signal now allows emphasised notifications,
  which will remain visible for a longer period of time and also
  reappear if a status change happened in the meantime
2016-12-15 16:11:29 +01:00
PyBitmessage Translations
9d9052dda2
Auto-updated language zh_cn from transifex 2016-12-13 17:52:23 +01:00
PyBitmessage Translations
49832231ca
Auto-updated language de from transifex 2016-12-13 17:39:49 +01:00
025950c05e
Fix locale init
- date/time wasn't localised correctly on startup
2016-12-13 11:54:01 +01:00
PyBitmessage Translations
dd777d6e43
Auto-updated language de from transifex 2016-12-12 00:44:09 +01:00
PyBitmessage Translations
d8b8e0e9dd
Auto-updated language fr from transifex 2016-12-10 20:12:30 +01:00
114563ed2f
Default logger output UTF-8
- fixes errors when using locales other than EN
2016-12-06 16:15:37 +01:00
0dde976dec
Fix timeformat in configparser
- allow both raw (new) and non-raw (old) style timeformat for backwards
  compatibility
2016-12-06 13:04:52 +01:00
df18f7b042
Switch configparser to raw mode 2016-12-06 11:01:17 +01:00
e647d70bbc
New config parser class
- workaround for % in labels
- can be extended in the future
2016-12-06 10:47:39 +01:00
PyBitmessage Translations
9f89191742
Auto-updated language ja from transifex 2016-12-05 12:09:41 +01:00
9509552663
New network backend (WIP, not integrated)
- current snapshot of the new network backend code
- not working yet, just base classes and no integration
2016-12-01 16:48:04 +01:00
7ca6576dfc
Connection indicator for hidden service
- the number of connections as well as connection indicator was broken
  when running as a hidden service. This is a workaround
2016-11-16 19:36:50 +01:00
5cea1e04d1
SSL disconnect fix
- sometimes SSL connections unnecessarily disconnected on non-fatal
  errors. This should fix that. This is however a short term solution
  because of migrating to asyncore which has its own error handling
2016-11-16 15:18:09 +01:00
PyBitmessage Translations
1d3757ddc8
Auto-updated language pl from transifex 2016-11-15 22:07:40 +01:00
PyBitmessage Translations
3bafd597af
Auto-updated language eo from transifex 2016-11-15 21:36:16 +01:00
3f3774ff1f
Translation source update
- add extended encoding translation sources
2016-11-15 17:11:36 +01:00
7cc0f8fab0
Add extended encoding message validation
- validates variables of the "message" type
2016-11-15 17:10:33 +01:00
e76b10a6ed
Logging fix 2016-11-15 17:10:14 +01:00
bae7351849
Formating and standalone fix
- when running as a standalone program, helper_msgcoding logger import
  was missing
2016-11-15 17:09:08 +01:00
c6d45dd394
Encoding when sending to self
- when sending to self, it always used encoding 2 when saving into the
  inbox. Now uses the one that's currently selected
2016-11-15 17:07:53 +01:00
fbc9886eda
OpenCL settings saving fix 2016-11-15 17:06:56 +01:00
612333a267
Enable support for extended encoding
- receiving extended encoding now works
- sending works from the GUI by pressing "Shift" while clicking on
  "Send"
- requires https://pypi.python.org/pypi/msgpack-python
2016-11-14 20:23:58 +01:00
966b4382d8
Add handler for unknown encoding 2016-11-14 20:22:10 +01:00
5a438ccddd
OpenCL initialisation fix 2016-11-14 20:21:46 +01:00
b9748c55aa
Don't connect to self fix
- the hidden service don't connect to yourself fix was broken, this
  fixes the fix
2016-11-14 20:20:41 +01:00
54e3465575
HTML parser queue flush fix
- the queue wasn't correctly flushed
2016-11-14 20:19:26 +01:00
d35062b49c
Half-open connection limit warning fix
- it only should complain if on Windows and can't determine the Windows
  version
2016-11-13 08:50:09 +01:00
2fc2c78299
Extended encoding update
- modified to support both encoding and decoding
- fixes
- added test for all encodings
2016-11-12 17:20:45 +01:00
4af788e963
Placeholder proxy text
- based on what tor you're probably using (9150 for OSX and Windows,
  9050 for others)
2016-11-12 15:41:58 +01:00
PyBitmessage Translations
a6ac128e9e
Auto-updated language eo from transifex 2016-11-10 21:56:09 +01:00
PyBitmessage Translations
7033527c41
Auto-updated language pl from transifex 2016-11-10 21:55:24 +01:00
PyBitmessage Translations
0a948d382a
Auto-updated language de from transifex 2016-11-10 21:54:24 +01:00
PyBitmessage Translations
87f607688f
Auto-updated language sk from transifex 2016-11-10 21:52:21 +01:00
e9a3ef465c
OpenCL vendor selector
- when you have multiple OpenCL drivers at the same time, e.g. intel and
  nvidia, they won't mix leading to crashes. This patch makes it
  possible to select which driver to use by listing the available
  vendors
2016-11-10 21:43:10 +01:00
756f85c9f0
Don't connect to yourself when hidden service 2016-11-08 08:49:43 +01:00
a7f3afe5a6
Typo 2016-11-05 00:46:07 +01:00
8ce72d8d2d
Extended encoding updates
- more flexible and developer friendly. Still not active code
2016-11-03 22:41:36 +01:00
020a78b776
Exception prevention in hashCount
- I got a report that an exception can occur, and while I can't
reproduce it, this should avoid it
2016-11-01 14:44:39 +01:00
PyBitmessage Translations
c94492f17e
Auto-updated language pl from transifex 2016-10-30 03:18:00 +01:00
PyBitmessage Translations
976b11a307
Auto-updated language sk from transifex 2016-10-30 03:15:25 +01:00
ecbb985cb3
Newchandialog translation definition
- the ui file wasn't included in the source list
2016-10-28 22:31:50 +02:00
3d4869851e
Many changes on chan create/join dialog
- refactored to use the .ui file
- input logic change, address is always optional
- interactive input validation
- runs asynchronously to the main window
- address generator thread can now validate chans in addition to just
adding them
2016-10-28 22:07:16 +02:00
5c9bfe09a2
Parser queue flushing
- the parser queue wasn't flushed when there's an exception resulting in
  the wrong message being displayed selected
2016-10-27 23:09:31 +02:00
PyBitmessage Translations
22eb4d62bf
Auto-updated language de from transifex 2016-10-26 22:32:18 +02:00
PyBitmessage Translations
419affa3b3
Auto-updated language sk from transifex 2016-10-26 22:21:58 +02:00
PyBitmessage Translations
5299d025a8
Auto-updated language de from transifex 2016-10-26 05:05:51 +02:00
PyBitmessage Translations
04f0b6335d
Auto-updated language sk from transifex 2016-10-26 04:56:43 +02:00
781ea8a8a6
Typo 2016-10-26 02:19:26 +02:00
30d9de008f
Label change fix
- when changing an addressbook label using UTF-8, the correspnding
  messagelist label was garbled
2016-10-25 07:54:52 +02:00
a3584bb141
"From" combobox empty fix
- if label of your address is empty, the "From" combo box showed an
  empty entry (just the identicon). Now it shows the address instead
- fixes #898
2016-10-25 02:51:09 +02:00
b0d1ed8304
Make clear that address error message refer to the recipient
- a user report indicated there is confusion about address error
messages. He/she thought it refers to the sender address, however it
refers to the recipient address. This makes it more clear
2016-10-24 22:33:13 +02:00
ad0d2c375a
Recipient address error message status bar unicode fix
- when reporting an error about recipient address in the status bar, it
didn't correctly handle unicode
2016-10-24 22:31:54 +02:00
2c972fbe41
"Fetch Namecoin ID" button font size fixed 2016-10-24 22:29:14 +02:00
671f321ead
HTML parser fix
- the UTF-8-ifying of tags had missing brackets
2016-10-23 18:35:20 +02:00
40090a9a12
Notify in UI if time offset wrong
- if your time is off by more than an hour, you won't be able to
  establish a connection to the network. This patch adds a UI
  notification so that the user can understand why he can't connect.
2016-10-23 10:12:49 +02:00
c335ef7d10
HTML parser fix
- sometimes, a tag attribute name is UTF-8, sometimes it isn't. This
  change makes it handle both
2016-10-23 09:02:27 +02:00
32f1e0447a
Multiprocessing PoW fixes and improvements
- the multiprocessing PoW should now work correctly
- it also should be interruptible correctly and the GUI will ask about
  it during exit
2016-10-22 05:00:35 +02:00
9dd09a44fc
Message list loading performance improvement
- by disabling UI updates (which are not necessary as it freezes
  anyway), the message list loading is faster
2016-10-22 01:47:29 +02:00
47e2df86b9
Freezing message parser fix #2
- this has been tested on Windows as well, and has been cleaned up.
  There is now a permanent parser thread, and it restarts when the
  parsing takes more than 1 second
- Fixes #900
2016-10-22 01:45:32 +02:00
8f194296e7
Long message parsing fix
- while 448ceaa74c fixed slow rendering on
  windows, there was still a bug where overly long messages caused
  freezeing of the hyperlink regexp parser, which appears to happen on
  all platforms. Maybe it's a freeze, maybe it just takes too long. This
  patch aborts the regexp parser after 1 second and simply displays the
  message without hyperlinks being clickable. This doesn't affect HTML
  mode because there the links are kept as they are
- Fixes #900
2016-10-21 15:54:02 +02:00
2067040ff1
MessageView localisation fix 2016-10-20 20:38:21 +02:00
448ceaa74c
Line wrap performance workaround
- some messages (e.g. some long messages on Windows, or binary data)
  cause an excessive amount of time in rendering the body. This
  change is base on a workaround I found at
  http://www.qtcentre.org/threads/8188-bug-setLineWrapMode
2016-10-20 20:26:53 +02:00
96212693b2
Message does not need plurals 2016-10-20 16:54:25 +02:00
3a1d581c9e
Multiple UI status updates
- most status messages are transient, so they are now only displayed for
  10 seconds
- when trying to quit while disconnected or not fully synced, a
  three-choice message box now appears: Yes for waiting, No for
  closing anyway, and Cancel for aborting the shutdown procedure
2016-10-20 16:06:46 +02:00
e1dd29bfd1
Copyright UTF8 character fix
- this copyright character has been plaguing pylupdate4 parser and
  multiple unsuccessful attempts have been made and then reverted.
  Replaced with a HTML entity, hopefully this will finally fix it.
2016-10-20 02:50:00 +02:00
4436c5f3d1
More proxy fixes
- proxy connection should be able to handle IPv6 correctly
- UI status bar notification typo fix
2016-10-20 02:49:07 +02:00
ab79ee2a04
Proxy error handling
- UI will now display notifications in the status bar if the connection
  to the proxy itself is broken. This should give better feedback to
  people who are unfamiliar with tor and misconfigured it
- The proxy error handling in the background was slightly improved as
  well
2016-10-20 01:49:40 +02:00
Marius Ghita
7aecb4aad1 Hide connection notifications configuration option
New option on the User Interface settings tab, to hide connection
notification messages.
2016-10-11 19:14:06 +02:00
9590f83820
Typo
- see
  e6ce73f4bd (commitcomment-19344095)
2016-10-08 10:01:34 +02:00
679e554c7d
Translation source update 2016-10-05 20:50:07 +02:00
1b03b535cf
Translation source fix 2016-10-05 20:49:32 +02:00
73ec6a9174
Translation source fix 2016-10-05 20:30:05 +02:00
739d46004c
Translation source fix 2016-10-05 20:29:42 +02:00
e6ce73f4bd
Multiple PoW updates
- fixes "fast python" (multiprocessing) PoW
- python PoW (both slow and fast) interruptible on *NIX
- signal handler should handle multiple processes and threads correctly
(only tested on Linux)
- popul window asking whether to interrupt PoW when quitting QT GUI
- PoW status in "sent" folder fixes and now also displays broadcast
status which didn't exist before
- Fixes #894
2016-10-05 20:06:47 +02:00
029b0525de
Fix invalid variables 2016-08-31 16:33:25 +08:00
cc90747da1
Improve namecoin init error handling
- partially addresses #896
2016-08-31 16:24:28 +08:00
59dba6a7c7
Namecoin error logging changes
- namecoin connection errors have now severity "info" instead of
  "error", because it just confuses peopel who don't have namecoin
  configured
- partially addresses #893
2016-08-29 12:13:08 +08:00
61a08299b8
Less confusing message when logger config missing
- if the logger config is missing, don't print unnecessary stack trace
- partially addresses #893
2016-08-29 11:56:21 +08:00
2616a9d4c1
Fix PyGI warnings
- Partially addresses #893
2016-08-27 21:47:40 +08:00
d1a90085b7
Version bump for 0.6.1 2016-08-21 11:56:25 +02:00
35eca9c05d
Translation update
- added Polish
- regenerated binaries
2016-08-21 08:06:22 +02:00
9aa253f73e
Update translations
- refresh english source
- update others from transifex
2016-08-21 07:59:06 +02:00
8df8d15cba
Keep known nodes for 28 instead of 2 days 2016-08-21 07:28:33 +02:00
c58c1969e5
Increase width of TTL slider
- horizontal slider was too narrow and unusable on the latest Fedora.
  Increased size and tested at 800x600 to make sure it's not too wide
  now.
2016-08-21 07:23:46 +02:00
67c3d7bbca
Add "Mark all messages unread" context menu item
- account context menu how has a "Mark all messages unread" item
- folders now have a context menu as well and it has this item too
2016-08-20 22:38:36 +02:00
ca031dc421
More namecoin fixes
- namecoin lookup now also includes name of the record in the recipient
  field
- namecoin lookups now support multiple semicolon-separated
  recipients like the other recipient-related functions. If there are
  multiple recipients, namecoin lookup will look up the last entry on
  the line, for example if you have "a; b; c" in the recipient line,
  it will lookup "c"
2016-08-17 22:02:41 +02:00
29abf0fa08
Namecoin fixes
- Namecoin support was broken, an anonymous contributor sent a patch,
  and I made another fix for keepalive connections.
2016-08-17 17:26:00 +02:00
4117195b61
Don't freeze when out of known nodes
- bitmessage could end up having no known nodes and then it would
  freeze. Now it shouldn't freeze, however it can still end up without
  known nodes until a restart in some cases (e.g. when suspending the
  computer for more then 3 days while BM is running)
2016-08-14 15:03:18 +02:00
306a2495e0
Recipient label UTF-8 fix
If recipient label had UTF-8 characters, clicking Send would trigger a
decoding error and woudln't send.
2016-08-14 12:56:28 +02:00
60c447f56b
Merge commit 'd3a0404274e5105b9d6279901246af8f7009eb6d' into v0.6
- "env python2.7.x" was causing problems
2016-08-14 12:44:18 +02:00
45630b779b
Merge commit 'afa715cf1b113f970ab9b698e4acad33178836ef' into v0.6
- change default time and date format (when running BM for the first
  time)
2016-08-14 12:37:20 +02:00
de2fb17959
Keep system language when changing settings
- when language was set to "system settings" and you changed any setting
  while BM was running, it switched the language to English.
2016-08-14 12:01:00 +02:00
233a30f114
SMTPd bugfix
- missing import prevented the SMTP server from working
2016-07-22 08:10:56 +02:00
36a04fd7d9
Add SMTP server
- you can now use SMTP to send messages
- uses bmaddr.lan domain
- runs on 127.0.0.8425 if you set "smtpd" to True
- mandatory authentication with smtpdusername and smtpdpassword
2016-07-19 13:57:54 +02:00
ng0
d3a0404274 Fix python shebangs from #!/usr/bin/env python2.7*' to #!/usr/bin/python2.7'.
* src/bitmessagecli.py: fix it.
* src/bitmessagemain.py: same.

This fixes #887.
2016-07-16 15:42:19 +00:00
8e066eaa97
Add SMTP delivery labels
- SMTP delivery now has from and to labels for local addresses
2016-07-09 09:58:01 +02:00
b8a08a0ce9
Fix python PoW
- recent changes cause the pool workers to trigger shutdown and freeze.
  Now python PoW works again
2016-06-30 23:03:39 +02:00
685ff6cecd
Startup fixes
- correctly test for "smtpdeliver" variable without crashing
- new method for safely getting values from config even if the option
  may be missing
2016-06-30 15:19:58 +02:00
d3e8771aed
Lock file fixes
- daemon mode lock file didn't work correctly in the last commit
2016-06-30 13:07:28 +02:00
4865659d72
Main process fixes
- handles old dialog versions better if using curses
- can spawn SMTP delivery thread if configured (only when in daemon
  mode)
- daemonized mode now works more like it's properly supposed to on unix
  (double fork etc). You may have to adjust your init scripts, when
  when using upstart for example you should now use "expect daemon"
- daemon mode now cleanly shuts down when TERM/INT signal is received
2016-06-30 12:30:05 +02:00
e5c9e6d383
Curses fixes
- curses interface should now work with older versions of dialog
- Fixes #711
2016-06-30 12:28:17 +02:00
3d9c036129
SMTP delivery thread
- thread can deliver incoming messages over SMTP
- this commit just contains the thread, subsequent commits will enable
  it
2016-06-30 12:27:36 +02:00
6895da7f65
Quit immediately if disk full
- PyBitmessage only used to quit on disk full when running in daemon
  mode. When this happened with the QT-GUI, it would end up in a
  half-frozen status instead. Quitting is a safer choice

Fixes #572
2016-06-29 22:08:34 +02:00
e649adbe37
Framework for extended message encoding
- helper classes for encoding/decoding messages
- includes both old as well as new extended one (msgpack+zlib)
- the classes are unused yet and are supposed to be for experimenting
2016-06-24 22:45:56 +02:00
6add48e036
UPnP fix
- it looks like some UPnP server implementations consider NewRemoteHost
  to be a mandatory tag
2016-06-22 22:54:06 +02:00
0689525d61
UPnP fixes
- detects WANPPPConnection vs WANIPConnection
2016-06-21 10:11:15 +02:00
efa12c3ac6
Do not connect on shutdown
- in some cases, such as when using trustedpeer, outgoingSynSender
  threads would wake up and try to connect. This fixes it.
2016-06-18 20:35:16 +02:00
Louis-Guillaume DUBOIS
afa715cf1b
Fixes #867 - Changes default time format to %c 2016-06-18 14:19:23 +02:00
cec2233043
Fix about dialog
- Last commit broke the about dialog, this fixes it again.
2016-06-17 19:58:16 +02:00
d9ca8d1e5e
Fix UTF8 character in translation source
- "About" dialog did not correctly interpret source UTF-8 characters
2016-06-16 14:06:36 +02:00
ca297cafed
Delete old nodes
- cleanup will delete nodes that are older than 3 days
2016-06-15 18:45:23 +02:00
65211703c0
Try UTF-8 locale encoding
- setlocale didn't always try UTF-8, and on systems that only had UTF-8
  encoding of the selected locale, this would fail to change locale

Fixes #872
2016-06-14 21:57:40 +02:00
0dd54e606d
Multiple connections on hidden service fix
- there was a bug which prevented multiple parallel connections on
  hidden service
2016-06-10 18:01:46 +02:00
b0446f412a
Prevent leaking of tor relay IP
- when running a hidden service, the IP of the tor relay was a part of
  the verack message. In setups where it's not 127.0.0.1 it may leak
  info about network topology
- thanks for an anonymous bug report
2016-06-10 13:21:31 +02:00
fbed1eff31
Socks error handling
- Socks errors are now handled in a smoother manner
2016-06-10 12:43:37 +02:00
f242d409fd
Tor hidden service fixes
- will send the correct combination of hostname and port
- if proxyhostname is a hostname and an IP address, it will now allow
  multiple parallel connections for hidden service
2016-06-10 10:44:42 +02:00
1a40c29d22
Add Tor hidden service support
- PyBitmessage can now run as a hidden service on Tor
- three new variables in keys.dat: onionhostname, onionport, onionbindip
- you need to manually add a hidden service to tor
2016-06-07 21:59:48 +02:00
33991f4598
Implement node priority
- prioritise connecting to nodes that were online more recently
- hidden service nodes have a higher priority if using tor
2016-06-07 12:23:47 +02:00
c11dd67e50
Translation update
- Russian, French, Italian, Portuguese and Esperanto updated from
  transifex
2016-06-05 10:13:23 +02:00
9e2389306b
BSD compile fixes
- bitmsghash should now build and run on BSD (thanks for
  FreeBSD/Dragonfly maintainers for assistance)
- if it cannot detect the number of cores, will default to one thread
  (previously it broke)
2016-05-24 09:42:49 +02:00
e353af3195
Locale encoding fixes
On non-Windows, setlocale will try both normalised and preferred
encoding.
2016-05-24 08:44:07 +02:00
6dff105a5b
Unread count and subscriptions
- unread count was optimised (based on profiling)
- unread count is now accurate
- listing subscription messagelists and count fixed
2016-05-23 11:11:44 +02:00
b194e4ca20
Bump version to 0.6.0 2016-05-02 21:51:46 +02:00
75eef9ef2f
Fix merge conflicts
Missed this difference in the last commit
2016-05-02 17:33:18 +02:00
aabf600c38
Fix incorrectly resolved merge conflicts
Two file merge conflicts, __init__.py and upnp.py, were not resolved
correctly by the automatic resolving (probably because the affected code
was written by other people and I merged them into mailchuck fork). This
changes it to the same code that is in the mailchuck fork)
2016-05-02 17:10:45 +02:00
eebf264552
Translations update 2016-05-02 16:07:58 +02:00
10a3d2d28a Add uPnP translation source 2016-05-02 15:00:26 +02:00
mailchuck
b724d3ee4f Copyright year updates 2016-05-02 15:00:26 +02:00
mailchuck
444edbd6a3 Subscription folder loading fix 2016-05-02 15:00:26 +02:00
02a593fc7f Translation source update 2016-05-02 15:00:26 +02:00
mailchuck
3f1f3e9b3b Remove default debugging
Only log errors. Can be overriden by a config file.
2016-05-02 15:00:26 +02:00
mailchuck
9edde110a2 Translation update
Some function calls were not being identified as text that should be
translated.
2016-05-02 15:00:26 +02:00
mailchuck
9193c2070e Labels when replying
If present, a label will be included in the reply line edit.
2016-05-02 15:00:26 +02:00
fabfc91e8f Translation source update 2016-05-02 15:00:26 +02:00
mailchuck
4013bd31fd Time & date Windows encoding
On Windows, the encoding was always the default windows encoding and
didn't change when you use a language in BM that required a different
encoding. This affected mainly date & time in the received column and
the startup info on the network status tab.
2016-05-02 15:00:26 +02:00
mailchuck
88678eab3a Sent table header
Inbox/Sent table header for the last column now adjust (previously, both
were "Received", now the latter is "Sent).
2016-05-02 15:00:26 +02:00
mailchuck
5afdc052ff Retranslate fix
Update identities tree context menu on language change.
2016-05-02 15:00:26 +02:00
mailchuck
58481afda2 Completer unicode fixes 2016-05-02 15:00:26 +02:00
mailchuck
46edb72b4f Send from addressbook label
When choosing an item from addressbook to send to, put both label and
address into the lineEditTo widget.
2016-05-02 15:00:26 +02:00
mailchuck
98313d594f Sender autocompletion
Sender autocompletion now works, and is based on the l labels in the
addressbook (i.e. all addressbook entries, all subscriptions and chans).

Repurposed C code from
https://stackoverflow.com/questions/21773348/how-to-force-qcompleter-to-check-second-word-in-qlineedit
2016-05-02 15:00:26 +02:00
mailchuck
b8667864f5 Addressbook exception fix
The avatar was throwing an exception.
2016-05-02 15:00:26 +02:00
61ae94098d Translations update
English source plurals updated.
2016-05-02 15:00:26 +02:00
mailchuck
94d5eeb16f Unread count fixes 2016-05-02 15:00:26 +02:00
ad6d55cebe Translations update
- TTL hours/days now has correct plurals/paucals
- TTL description updates better when changing language (was "X days")
- language sources updated
2016-05-02 15:00:26 +02:00
658d52fb4f TTL/Send tab fixes
Now stretches correctly and does not unnecessarily shorten the text.
2016-05-02 15:00:26 +02:00
mailchuck
ddb48cad86 Typo 2016-05-02 15:00:26 +02:00
mailchuck
83cc25fef5 Typo 2016-05-02 15:00:26 +02:00
e8b1e1adcf Localisation update
The plural/paucal form support was not compatible with pylupdate4, it
didn't correctly parse the 3-argument calls to translate.

This fixes it, and updates the sources accordingly.
2016-05-02 15:00:26 +02:00
mailchuck
360d41792c Tab labels
Network status and Blacklist labels fix.
2016-05-02 15:00:26 +02:00
mailchuck
cb1c8157fe Objects to be synced timer
Now updates together with bandwidth every 2 seconds.
2016-05-02 15:00:26 +02:00
mailchuck
b7fefb3c40 Windows locale fix
Python locales (e.g. for time and date) didn't work on Windows.
2016-05-02 15:00:26 +02:00
3be851297c Translation updates
- regenerated sources
2016-05-02 15:00:26 +02:00
92e3e62640 Locale fix
Date formatting sometimes didn't use the correct locale encoding
2016-05-02 15:00:26 +02:00
mailchuck
c29f266020 Translation fixes
- locale name is properly normalised rather than simply changing the
string
- translations now support plurals/paucals
- networkstatus updated
2016-05-02 15:00:26 +02:00
9e10d714aa Translation update
Refresh sources.
2016-05-02 15:00:25 +02:00
38700a1721 Network Status tab translations update
- remembers startup time
- kB instead of KB
- stream table and status texts scale and aren't cut if they translated
text doesn't fit
2016-05-02 15:00:25 +02:00
af098e4805 Locale for non-QT UI strings
Some parts of strings did not use the proper locale. For example, date
and time strings was always output with the US locale. This fixes it.
There are still some cases where localisation is not implemented, and
could be changed from str(string) to locale.str(string).
2016-05-02 15:00:25 +02:00
0507411696 Shutdown fix
The GUI shutdown changes sometimes caused freezes on linux.
2016-05-02 15:00:25 +02:00
mailchuck
3dbb4d5ce9 GUI shutdown improvements
- it shows that it needs to wait for PoW to finish
- it waits a bit for new objects to be distributed
- it displays a better progress indicator in the status bar

Previously, people who don't understand how PyBitmessage works sometimes
shut it down immediately after they wrote a message. This would have
caused the message to be stuck in the queue locally and not sent. Now,
it will indicate that the PoW still needs to work, and it will wait a
bit longer so that the message can spread. It's not a completely correct
approach, because it does not know whether the message was really
retrieved after the "inv" notification was sent.
2016-05-02 15:00:25 +02:00
mailchuck
167da731d0 Make new version notifications less intrusive
Now only in status bar and no more popup window.

Previously, it only showed once until a restart, but now it shows every
time it detects a new version online. Since it does not show a popup
window it's not a big deal.
2016-05-02 15:00:25 +02:00
2f27d43e7e PoW can sometimes be shutdown-able
Python and OpenCL PoW now stop when PyBitmessage shutdowns. C PoW needs
additional support in C so it doesn't work there yet.
2016-05-02 15:00:25 +02:00
5adc4429f0 Translations update
- synced translations from Transifex
- updated source
- added Slovak translation
2016-05-02 15:00:25 +02:00
70e06c33f6 Remove some debugging
Language loading debugging not necessary.
2016-05-02 15:00:25 +02:00
fd4329bee0 Refactor localisation
The language combo box is generated dynamically from the list of
available translations in the translations directory. This allows the
users to add their own translations without having to change the code.
2016-05-02 15:00:25 +02:00
mirrorwish
a7ec4c0555 Some preparations for python 3 2016-05-02 15:00:25 +02:00
be16be2bb4 Translation update
Updated English source strings.
2016-05-02 15:00:25 +02:00
d46fd6f486 Translation fix
Plural form fix
2016-05-02 15:00:25 +02:00
d625659cc6 User agent parser fix 2016-05-02 15:00:25 +02:00
ca11852632 Translation source update
NewSubscriptionDialog missing string updated.
2016-05-02 15:00:25 +02:00
baff42f578 Typo
String typo, also updated translation source.
2016-05-02 15:00:25 +02:00
e9f62efa4b Default compose body "untranslate"
There is no reason to retranslate the default message/broadcast body,
and the default was just confusing HTML with no content.
2016-05-02 15:00:25 +02:00
d25a1302ce Version bump 2016-05-02 15:00:25 +02:00
858e93befd Update build scripts
- PyInstaller script (e.g. for Windows)
- build_osx.sh for OSX
2016-05-02 15:00:25 +02:00
de14730ad9 Translations update
- synced with Transifex
2016-05-02 15:00:25 +02:00
c30433cdaa "All accounts" internationalisation fix 2016-05-02 15:00:25 +02:00
412e175f27 Translation updates
Added a RetranslateMixin. Since PyQT does not support automated language
changes of UI files (like the C++ QT does), this implements something
similar. It assumes that the UI file has the same name as the class, but
lowercase.

Added RetraslateMixin to the new blacklist and networkstatus interfaces.
2016-05-02 15:00:25 +02:00
ecfa18b1c6 Change UI loading for frozen 2016-05-02 15:00:25 +02:00
8b605a874a Translation updates
- add missing files into translation definition
- refresh english strings
- change context for "networkstatus"
2016-05-02 15:00:25 +02:00
0f267c94c7 Translations update
- added Danish translation (thanks @mirrorwish)
- added English translation (to serve as a source for other
  translations)
2016-05-02 15:00:25 +02:00
491579c368 Translations update source files 2016-05-02 15:00:25 +02:00
mirrorwish
554627dd92 Refactor Inventory 2016-05-02 15:00:25 +02:00
mirrorwish
7800272d3a Refactor Blacklist tab 2016-05-02 15:00:25 +02:00
mirrorwish
337cf93b4b Fix byte formatting 2016-05-02 15:00:25 +02:00
24ae23946b Translations config file update 2016-05-02 15:00:25 +02:00
mirrorwish
69aa618890 Combine all translation project files into one 2016-05-02 15:00:24 +02:00
mirrorwish
a23022b2db Refactor Network Status tab 2016-05-02 15:00:24 +02:00
mirrorwish
64fce79321 Refactor status icon 2016-05-02 15:00:24 +02:00
mailchuck
4f56e49a30 Unread count refresh updates 2016-05-02 15:00:24 +02:00
mailchuck
66824c32d1 sqlExecute now returns rowcount
This allows tracking of how many rows were changed, for example for
UPDATE, DELETE, INSERT.
2016-05-02 15:00:24 +02:00
mailchuck
8172fce730 Typos 2016-05-02 15:00:24 +02:00
mailchuck
a63f9054f4 Global Sent fix 2016-05-02 15:00:24 +02:00
mailchuck
0ab0e6757a Restrict pending parallel requests on proxy
This saves some network resources if using Tor, for example.
2016-05-02 15:00:24 +02:00
1b50f3898a UPnP fixes:
- external port iterator fix
- error handler fix
2016-05-02 15:00:24 +02:00
mailchuck
a1b44aab44 UPnP fixes
- UPnP handles errors better
- it tries to bind external interface (previously sometimes it searched
on 127.0.0.1 resulting in no routers being detected)
2016-05-02 15:00:24 +02:00
e03803e4e8 Translations update
Updated translation source files
2016-05-02 15:00:24 +02:00
f8dcb965ea Grammar fix
- Fixes #179
- Thanks to @Erkan-Yilmaz
2016-05-02 15:00:24 +02:00
d63ecfc566 Translation update
- typos
- updated German translation
- Fixes Bitmessage#844
2016-05-02 15:00:24 +02:00
3fcaa47232 Ack received translation typo
Fixes Bitmessage#644
2016-05-02 15:00:24 +02:00
143abe3c34 Preliminary Tor hidden service support 2016-05-02 15:00:24 +02:00
c5363c3c5e Add bitcoin URI handler for message viewer 2016-05-02 15:00:24 +02:00
2e47ab0cd2 Keyboard modifiers with quick navigation
The quick navigation key disrupted keybindings with keyboard modifiers,
like Ctrl-C for copy. This restricts the quick navigation only where no
keyboard modifiers are active.

Fixes #184
2016-05-02 15:00:24 +02:00
a30d5af948 Global Sent and Trash folders 2016-05-02 15:00:24 +02:00
mailchuck
8d8cfe8555 More unicode fixes
Addresses #180
2016-05-02 15:00:24 +02:00
mailchuck
da036c6b6b UTF fixes
Label edits now accept and save utf8 characters.
Addresses #180
Still need to check how it behaves on invalid chars.
2016-05-02 15:00:24 +02:00
mailchuck
47bc85f0b6 Sent folder in chans extended
Previously, it only showed message sent to the selected chan address.
Now it shows both those sent to and sent from the chan address.

Fixes #181
2016-05-02 15:00:24 +02:00
mailchuck
d8aa484b8c Email gateway interface usability improvements
- don't allow status request / settings unless registered already
- if registered, status request is the default selected option

Fixes #182
2016-05-02 15:00:24 +02:00
mailchuck
2adafdaadc Improved URI detector 2016-05-02 15:00:24 +02:00
mailchuck
ed5c8a01ef loadResource incorrect parameters 2016-05-02 15:00:24 +02:00
mailchuck
a79f6cce3b Clipboard copy unicode
Copying unicode subjects to clipboard didn't work.

Fixes #183
2016-05-02 15:00:24 +02:00
113ceb0868 Email links "From"
Clicking email links now sets "From" based on the message the link is
in.
2016-05-02 15:00:24 +02:00
af193a1bca Keybindings
- delete key now works when message body is focused as well
- N for next message (down)
- P for previous message (up)
- R for reply
- C for compose
- F for find
- Find is now dynamic if the search text is least 3 characters long

Fixes Bitmessage#655
Addresses #155
2016-05-02 15:00:24 +02:00
9e2ae4eeb5 Allow close to tray
PyBitmessage can now close to tray. Even though the main code was there,
the UI and config variable were missing.

Fixes Bitmessage#564
2016-05-02 15:00:24 +02:00
b3b69b1eac deleteRowFromMessagelist implementation
Rows are deleted from a message list in multiple places, and this is an
attempt to refactor it so that it is done in one function. It's not used
anywhere yet.
2016-05-02 15:00:24 +02:00
976af4b3cd Empty resource loader for messageview
MessageView does not currently load external resources (QTextBrowser by
default interprets all external resources as local file names and tries
to load them like that. This can, in the future, be implemented. For
example, if SOCKS (Tor) is used, the resource could be loaded through
the SOCKS too.

This commit is a skeleton for it that does not actually do anything and
can be filled with an implementation that does the loading.
2016-05-02 15:00:24 +02:00
96a1726426 Clickable email and http links in plain text
Email addresses and URIs are now clickable when viewing a message in
plain text mode. Clicking an email address moves to the Send tab, while
clicking an URI has the same result as clicking an URI in html mode, it
will ask for confirmation before opening it in external handler.
2016-05-02 15:00:24 +02:00
f27ca0d3d6 HTML parser updates
HTML parser wasn't correctly handling img tags.
Now it also by defaults disabled external schemas to prevent
deanonymisation (even though the renderer actually doesn't support
external schemas at the moment)

Addresses #178
2016-05-02 15:00:24 +02:00
b202ac6fab Do not allow port 0
Attackers injected node addresses with port 0 into the network. Port 0
is unusable on many OSes and can't be listened on. PyBitmessage won't
accept nodes that have port 0 anymore.
2016-05-02 15:00:24 +02:00
9239813ebb Constant time decryption
Always try to decrypt with all keys.
2016-05-02 15:00:24 +02:00
4c2ce7208c Sleep on invalid getdata
- postpone initial sleep until the first getdata is received
- also sleep when received a getdata request for an object that hasn't
been advertised to the other node yet
2016-05-02 15:00:24 +02:00
1a92db54c9 Process gateway registration rejections
A message from gateway registration addres regarding registration
rejection is processed and a dialog displayed to get a new email
address.

Fixes #14
2016-05-02 15:00:24 +02:00
6b8f255a60 Email gateway updates
- settings option available
- reduce max TTL to 2 days
2016-05-02 15:00:24 +02:00
2b6bffc7ff Email gateway account status query
- addresses #14
2016-05-02 15:00:24 +02:00
db84d699db Search improvements
- selecting a new folder will apply search
- newly arrived message will consider search
- fixes #166
2016-05-02 15:00:24 +02:00
218bdf38e1 Better error reporting for log config
Fixes #174
2016-05-02 15:00:24 +02:00
ab974abce0 Sent message status on ACK
Fixes #176
2016-05-02 15:00:24 +02:00
8f5d305242 Mitigate active internal intersection attack
There was a report that by quickly asking a large number of nodes if
they have an ACK object (which the attacker knows but it is injected
into the network by the recipient of the message), it can estimate how
an object propagates through the network, and eventually pinpoint an
originating IP address of the injection, i.e. the IP address of the
message recipient.

This patch mitigates against it by stalling when asked for a nonexisting
object (so that the attacker can't spam requests), and also upon
connection before sending its own inventory list (so that reconnecting
won't help the attacker). It estimates how long a short message takes to
propagate through the network based on how many nodes are in a stream
and bases the stalling time on that. Currently that is about 15 seconds.
Initial connection delay takes into account the time that already passed
since the connection was established.

This basically gives the attacker one shot per a combination of his own
nodes and the nodes he can connect to, and thus makes the attack much
more difficult to succeed.
2016-05-02 15:00:24 +02:00
f43e01ed0e Don't send ACK on subscribed chans
If somehow you manage to send a message that includes an ACK part into a
chan, the subscribers would send the ACK back. This shouldn't happen.
2016-05-02 15:00:23 +02:00
40f0ff381e blacklist rendering edit fix
Editing of blacklist labels affected the rerendering, because it emits
the changed signal too, and it caused an exception because the address
field was missing at that time. This works around both.
2016-05-02 15:00:23 +02:00
0bd89103a7 Don't send unnecessary ACKs
In some situations, it's not necessary to send an ACK. For example, when
the sender is blacklisted, when the message has no content, or when the
address has ACK sending disabled.

Also it's not necessary to rebroadcast empty messages into a mailing
list.
2016-05-02 15:00:23 +02:00
mirrorwish
80c174e417 Save changes to blacklist labels
Fixes mailchuck/PyBitmessage#175

Signed-off-by: Peter Surda <surda@economicsofbitcoin.com>
2016-05-02 15:00:23 +02:00
mailchuck
bcae62938a Unused variable 2016-05-02 15:00:23 +02:00
mailchuck
24a2deed8f Cleanup lockfile on exit
singleton.py design was broken.
Fixed Bitmessage#775
2016-05-02 15:00:23 +02:00
mailchuck
4f26bf1059 private IP range checks
When advertising nodes and when establishing connections, private IP
range checks were not done. This could cause private IPs to be
advertised across the network. Also, some of the checks weren't
IPv6-aware.
Fixes Bitmessage#768
2016-05-02 15:00:23 +02:00
mailchuck
47f1c0c267 Thread names for IPv6
Thread names for IPv6 contained ":". This caused problems in log
parsers.
2016-05-02 15:00:23 +02:00
mailchuck
89752faceb Newly arrives messages sorting
There could be cases where newly arrives message is not added correctly.
It won't necessarily go to the top, that depends on the sort.
2016-05-02 15:00:23 +02:00
mailchuck
3bde549e5c Version bump for 0.5.7 2016-05-02 15:00:23 +02:00
mailchuck
185d212cb2 Unread count refresh on change 2016-05-02 15:00:23 +02:00
mailchuck
8f1e753cf0 Typo 2016-05-02 15:00:23 +02:00
mailchuck
140b3ddbb8 Test cleanup
Safer this way
2016-05-02 15:00:23 +02:00
mailchuck
66e1a26b33 Popup menu on folders
There are no functions associated with it but sometimes it popped up so
disable it.
2016-05-02 15:00:23 +02:00
mailchuck
7c99899248 updateText was deleted so no need to call it 2016-05-02 15:00:23 +02:00
mailchuck
2dc230db90 Tree rerendering cleanup
Fixes #76
2016-05-02 15:00:23 +02:00
mailchuck
1cc4fac7f4 Unread count cleanup
Addresses #128
2016-05-02 15:00:23 +02:00
mailchuck
f5187e16a0 BlackWhitelist rerendering
It used to show entries with no address.
Fixes #170
2016-05-02 15:00:23 +02:00
mailchuck
aae5b713b1 Disabling subscriptions should rerender addressbook
Addresses #76
2016-05-02 15:00:23 +02:00
mailchuck
4e4da254fa Addressbook / Tree / Messagelist rendering
Some changes that didn't propagate correctly before now do.
Addresses #76
2016-05-02 15:00:23 +02:00
mailchuck
f159133f14 TreeWidget and Addressbook editing propagation
If you change, add or remove an item in a treewidget or addressbook,
messagelists will now autoupdate labels, and sender comboboxes will also
update if applicable.
Fixes #69
2016-05-02 15:00:23 +02:00
mailchuck
e6c379cca6 Scroll/zoom in message composing widget
Fixes #169
2016-05-02 15:00:23 +02:00
mailchuck
a4c48228fc Messagelist subscription color
Fixes Bitmessage#842
2016-05-02 15:00:23 +02:00
mailchuck
484bdb0782 Quoting fixes
Message compose sometimes misinterpreted quoted message as HTML, causing
rendering screwups. Since we don't support HTML composing, we will treat
all quoted messages as plain text.
2016-05-02 15:00:23 +02:00
mailchuck
2597ac63f6 Zooming info percent based an single step
Zooming in message body view / compose works in single steps
irrespective of wheel sensitivity, and info about zoom level is
displayed in percent rather than font pixel size.
2016-05-02 15:00:23 +02:00
mailchuck
d36d6f300e Message body display handling of spaces
After the changes in the message body renderer, spaces were not
correctly handled. Fixes #168
2016-05-02 15:00:23 +02:00
mailchuck
056512a715 Sent folder new message selection fix
Fixes Bitmessage#838
2016-05-02 15:00:23 +02:00
mailchuck
9353e8eff7 Message editor updates
- Does not allow changing fonts (it's ignored once it's sent anyway),
fixes #167
- Allows zooming, fixes #163
2016-05-02 15:00:23 +02:00
mailchuck
32b0d24be2 singleWorker shutdown fix
if singleWorker crashed, the thread couldn't be joined. This both makes
it so that it doesn't crash, as well as reorders the shutdown sequence
so that it is less likely to be triggered.
Fixes Bitmessage#549
2016-05-02 15:00:23 +02:00
mailchuck
ec4a16b388 objectProcessorQueue fixes
- it didn't shutdown correctly
- it didn't handle exception correctly (however, if I understand
correctly, this will never be triggered if using blocking get, so it
doesn't affect PyBitmessage)
- flushing size check changed from 1 to 0 (I don't know why it was 1)
2016-05-02 15:00:23 +02:00
47f0df6c0b Object processor queue class
Previous commit didn't include the class. This class takes care of queue
size monitoring so that the system doesn't run out of memory.
2016-05-02 15:00:23 +02:00
e4f31d25fc Flood mitigation optimisation
Flood mitigation was done both in the ObjectProcessorQueue as well as
receiveData threads. This patch removes the mitigation in receiveData
threads and cleans up the one in the ObjectProcessorQueue
2016-05-02 15:00:23 +02:00
mailchuck
2043d796dd Typo 2016-05-02 15:00:23 +02:00
mailchuck
a0da175d45 Typo 2016-05-02 15:00:23 +02:00
mailchuck
c137e334d2 OpenSSL version for support contact form 2016-05-02 15:00:23 +02:00
mailchuck
dc34c00f38 Improve OpenSSL library finder 2016-05-02 15:00:23 +02:00
mailchuck
b7e24fab4a DLL path fix in frozen mode
Addresses #152
2016-05-02 15:00:23 +02:00
mailchuck
6a965cd31a Don't test for Qt in daemon mode
Initialisation of the daemon variable was missing at launch.

Fixes #161
2016-05-02 15:00:23 +02:00
itsexe
72f9e29931 fixed some spelling errors 2016-05-02 15:00:23 +02:00
mailchuck
98fab9c568 Message body focus on reply
Fixes #156
2016-05-02 15:00:23 +02:00
mailchuck
43a765515a Remember current search
@rainulf  What's the reasoning behind resetting the search?

Fixes #155
2016-05-02 15:00:23 +02:00
mailchuck
b699475906 Clicks in empty message shouldn't produce an error 2016-05-02 15:00:23 +02:00
mailchuck
46494dc3e6 "All accounts" can't be renamed
Minor error
2016-05-02 15:00:23 +02:00
mailchuck
f4c2cc5160 Unicode
- subject on replies was not parsed correctly (or should I say was
parsed more than necessary)
- unicode can handle invalid characters without needing a special
function

Fixes #164
2016-05-02 15:00:23 +02:00
mailchuck
962c36e122 Allow zooming of message body
Uses default system zoom settings (Ctrl-Wheel).
Fixes #163
2016-05-02 15:00:23 +02:00
mailchuck
4033b945ee UPnP status bar update fix 2016-05-02 15:00:23 +02:00
mailchuck
1b36da9327 Save UPnP port
Fixes #129
2016-05-02 15:00:23 +02:00
mailchuck
27874df45f Typo (missing) 2016-05-02 15:00:23 +02:00
mailchuck
3f2108b36f Typo 2016-05-02 15:00:23 +02:00
mailchuck
e5675987a7 Fix frozen localisation (OSX)
Fixes Bitmessage#737
2016-05-02 15:00:23 +02:00
mailchuck
d7ff86705e Fix frozen localisation
Addresses Bitmessage#737
2016-05-02 15:00:23 +02:00
mailchuck
6f74ffc265 Mac OSX portable mode path
Fixes #150
2016-05-02 15:00:23 +02:00
mailchuck
3b30afea29 Messagelist subject class
Messagelist subjects now are their own class. Fixes #153
Also fixes replies/clipboard for gatewayed messages.
2016-05-02 15:00:22 +02:00
mailchuck
d6ec2a2b8d Version bump 2016-05-02 15:00:22 +02:00
mailchuck
0f24fe5a0c Missing import 2016-05-02 15:00:22 +02:00
mailchuck
4647fcb876 Disable label rerendering in messagelist
It's broken and just consumes resources. I'll fix it separately.
2016-05-02 15:00:22 +02:00
mailchuck
e650cff42d (Un)read messagelist items
Previous commits broke them, now it renders correctly again.
2016-05-02 15:00:22 +02:00
mailchuck
4b63c4c086 Address Qt.UserData fix
The previous commit broke places where UserData was read from the
mesagelist line, because it's now a string rather than a QVariant. This
actually simplifies things.
2016-05-02 15:00:22 +02:00
mailchuck
879a6f1d68 Messagelist loads faster
Addresses #149. About 5 times faster.
2016-05-02 15:00:22 +02:00
mailchuck
0b4c57a516 Entries missing in messagelist 2016-05-02 15:00:22 +02:00
mailchuck
a8053195ea Fix cdecl/stdcall DLL detection
Fixes #146
2016-05-02 15:00:22 +02:00
69494594d5 Main Window raising fixes
On OSX and linux, the tray icon now raises window.

Starting a new instance should raise the window too, but it may not work
on linux (on my Ubuntu it just flashes the icon)

Fixes Bitmessage#743
2016-05-02 15:00:22 +02:00
mailchuck
ff207c1b56 Portable mode fix
The option should not be available if the directory with the executable
is not writable, such as when running from a dmg on OSX.
2016-05-02 15:00:22 +02:00
mailchuck
4dbd444053 Logging fix 2016-05-02 15:00:22 +02:00
mailchuck
ea37913ff1 Html parser fixes
Raw mode improved, avoid HTML parser entirely and just replaces some
strings.
2016-05-02 15:00:22 +02:00
mailchuck
07cee7209b Contact support fixes
- typos & formatting
- OS detection crash fixes
2016-05-02 15:00:22 +02:00
d0b9d75ce1 Fix contact support unix detection 2016-05-02 15:00:22 +02:00
mailchuck
4049662a3a Contact support updates
Yes/No -> True/False
Add Portable mode
2016-05-02 15:00:22 +02:00
mailchuck
3e956509b2 Add PyBitmessage version to contact support 2016-05-02 15:00:22 +02:00
mailchuck
8359b8b202 Contact support user interface
Fixes #25
2016-05-02 15:00:22 +02:00
mailchuck
a727847e55 Addresses can be configured not to send acks
Manually by specifying "dontsendack" = true in the address section
2016-05-02 15:00:22 +02:00
mailchuck
4c8ba431e5 Add to blacklist from "All accounts"
It didn't work before
2016-05-02 15:00:22 +02:00
mailchuck
17d045da10 Sensible default maximum difficulty
Fixes #144
2016-05-02 15:00:22 +02:00
mailchuck
1f525da1ff Link follow warning
The message box should be a warning rather than a simple question.
2016-05-02 15:00:22 +02:00
mailchuck
eb35f35b83 Add system translations
Items like dialog box buttons were not localised. This loads the default
qt localisation, and also unloads the old localisation on locale change.
Still needs to be adjusted for frozen.

Addresses Bitmessage#737
2016-05-02 15:00:22 +02:00
mailchuck
7ef94b446d Lazy rendering of message contents
Message will render as user is scrolling down. This prevents interface
freezes on long messages (such as inline img in text mode). Fixes
Bitmessage##366

Also a minor fix in text mode rendering.
2016-05-02 15:00:22 +02:00
mailchuck
6557681a6c Message has safe link opening
Links in message body (if in HTML mode) now open, but it asks for a
confirmation in a dialog box.

Fixes #27
2016-05-02 15:00:22 +02:00
mailchuck
751f9108d8 HTML detector and switcher
HTML messages are detected and if present, the top of the message
textedit displays a clickable area that switches HTML rendering on and
off.

Fixes #13
2016-05-02 15:00:22 +02:00
mailchuck
8ff5bf0464 Channel reply enhancement
When replying to a message sent to a chan, now you can choose if you
want to reply to chan or sender. Fixed #9
2016-05-02 15:00:22 +02:00
mailchuck
4e32125ca3 Copy to clipboard in messagelists
Fixes #142
2016-05-02 15:00:22 +02:00
mailchuck
e2fb34e2fb More portable mode fixes 2016-05-02 15:00:22 +02:00
mailchuck
242c8fa9c2 More portable mode fixes 2016-05-02 15:00:22 +02:00
mailchuck
8136b022bc Typos
Still regarding portable mode path fixes
2016-05-02 15:00:22 +02:00
mailchuck
5a45d7dd8f Portable mode fixes
Fixes Bitmessage#379, Bitmessage#341
2016-05-02 15:00:22 +02:00
mailchuck
4f6fd07424 Joining chans interface freeze
Fixes #137
2016-05-02 15:00:22 +02:00
538642f236 Label for blacklisting sender fix
It wasn't properly utf-8-ied.
2016-05-02 15:00:22 +02:00
bdfaa90ecb Auto-register for email gateway if necessary
If attempting to send to an email address from an unregistered
account, auto-send registration to mailchuck.
Use label if possible, otherwise random 12 characater address

Fixes #131
2016-05-02 15:00:22 +02:00
082eb823bb New message appears if viewing account root
Fixes #132
2016-05-02 15:00:22 +02:00
mailchuck
d72e5647f4 Fix wrong account type initialiser
Addresses #14
2016-05-02 15:00:22 +02:00
mailchuck
27b8891ab4 Test commit policy commit 2016-05-02 15:00:22 +02:00
mailchuck
a5456f792c Fix Addressbook context menu delete 2016-05-02 15:00:22 +02:00
mailchuck
41ac1b89d1 Frozen SMP re-disable try 2 2016-05-02 15:00:22 +02:00
mailchuck
549d91dc68 Re-disable windows SMP frozen support
The recommended workaround didn't work.
2016-05-02 15:00:22 +02:00
mailchuck
1625306be3 Version bump 2016-05-02 15:00:22 +02:00
mailchuck
bccc2406a2 Fix double unread count in tray icon 2016-05-02 15:00:22 +02:00
mailchuck
d54b22bb89 Initialise inventorySets earlier
In corner cases, they may be referenced before they are populated.
Probably fixes Bitmessage#530
2016-05-02 15:00:22 +02:00
mailchuck
52fe7105a9 Allow bootstrap from a Tor hidden service
I run a modified node as a Tor hidden service for bootstrapping node
addresses, and PyBitmessage can now connect to it.
2016-05-02 15:00:22 +02:00
mailchuck
27c187283b Unify messagelist rendering
also some minor fixes
2016-05-02 15:00:22 +02:00
mailchuck
a3b13b70e2 Add BROADCAST type
also improve sorting
2016-05-02 15:00:22 +02:00
mailchuck
be02116af9 Global folder, global search, unread folder
Fixes #38
Fixes #39

Minor unread refresh issues.
2016-05-02 15:00:22 +02:00
mailchuck
6862952c55 Typo
OpenCL config variable setter had a typo
2016-05-02 15:00:22 +02:00
mailchuck
6ad3c956c9 Allow SQL arguments as a list or tuple 2016-05-02 15:00:21 +02:00
mailchuck
d75533c6b6 DNS bootstrap over Tor
If proxy type is SOCKS5, it will try to perform DNS bootstrap using the
Tor RESOLVE extension.
2016-05-02 15:00:21 +02:00
mailchuck
1e89616c0f Avoid strings in account types 2016-05-02 15:00:21 +02:00
mailchuck
399100e6d8 PoW support code cleanup
Is now nicer and reports if OpenCL fails
2016-05-02 15:00:21 +02:00
mailchuck
9335f74c61 OpenCL kernel change
This makes it work on my AMD.
2016-05-02 15:00:21 +02:00
mailchuck
e7e245fe25 OpenCL GUI settings 2016-05-02 15:00:21 +02:00
mailchuck
0c19e0c2e4 Failure to connect shouln't be an error
It resulted in too many errors in the logs
2016-05-02 15:00:21 +02:00
mailchuck
d0b73eb211 SMP fix for frozen Windows 2016-05-02 15:00:21 +02:00
mailchuck
aa97b53114 addressGenerator fixes
- addressGenerator got stuck (introduced recently when cleaning up
shutdown
- do not put addresses into API return queue if API is inactive
- improve translation
2016-05-02 15:00:21 +02:00
mailchuck
f9a7a5b6f2 Account in treeWidget more like a QT class
It behaves more like a QT class is supposed to now, it's somewhat
cleaner.
Fixes #122
2016-05-02 15:00:21 +02:00
mailchuck
d69c2e097f Cleaner shutdown
Addresses Bitmessage#549
2016-05-02 15:00:21 +02:00
mailchuck
6dbe20a25c Version bump 2016-05-02 15:00:21 +02:00
mailchuck
7b4264a109 Typo 2016-05-02 15:00:21 +02:00
mailchuck
f77afe8fae Exception handling 2016-05-02 15:00:21 +02:00
mailchuck
36ddbd365e Typo 2016-05-02 15:00:21 +02:00
mailchuck
410c23e8c0 Typo 2016-05-02 15:00:21 +02:00
mailchuck
ff358b1a1f Typo 2016-05-02 15:00:21 +02:00
mailchuck
ec68146135 Suppress error on releasing unlocked lock 2016-05-02 15:00:21 +02:00
mailchuck
e82e33fa51 UPnP notifications
UPnP will notify you through window status bar.
2016-05-02 15:00:21 +02:00
mailchuck
bbdfb1ea54 UPnP cleaner shutdown 2016-05-02 15:00:21 +02:00
mailchuck
e4a7e71790 SSL fixes 2016-05-02 15:00:21 +02:00
mailchuck
281630757e SSL fixes 2016-05-02 15:00:21 +02:00
mailchuck
18f7ef06e2 SSL fixes
Handle old Python compatibility better.
2016-05-02 15:00:21 +02:00
mailchuck
74519069f0 outgoingSynSender thread reaping disabled
It was causing delays on shutdown, worse on linux/osx
2016-05-02 15:00:21 +02:00
mailchuck
b00c4f24ec Threads close better
- UPnP and outgoingSynSender threads close slightly better.
- extPort initialisation was missing
2016-05-02 15:00:21 +02:00
mailchuck
48b9e50397 UPnP GUI
Settings GUI now contains a checkbox for UPnP and auto starts/stops the
thread when changed.
Default UPnP socket timeout decreased for faster thread
starting/stopping
2016-05-02 15:00:21 +02:00
mailchuck
50be5a2b4c UPnP fixes 2016-05-02 15:00:21 +02:00
mailchuck
8c14641810 Window resize on minimize bugfix
Fixes Bitmessage#243
2016-05-02 15:00:21 +02:00
mailchuck
c03c563a74 Make UPnP into a thread
- UPnP is now a separate thread that will continue to setup UPnP
- shutdown waits for threads that shutdown correctly (Addresses
Bitmessage#549)
2016-05-02 15:00:21 +02:00
mailchuck
cc848cdb65 Typo fix 2016-05-02 15:00:21 +02:00
mailchuck
5432c6e0c8 UPnP logging improvlement 2016-05-02 15:00:21 +02:00
mailchuck
3c9df7151c Logging fix 2016-05-02 15:00:21 +02:00
mailchuck
aa55f45a0d Logging fix 2016-05-02 15:00:21 +02:00
0270dc3d4d Cleanup UPnP 2016-05-02 15:00:21 +02:00
mailchuck
9338772b1e Logging updates
Came over BM (from "general" channel), I slightly modified it.
2016-05-02 15:00:21 +02:00
mailchuck
b7ad34cf15 Trusted peer flood protection
Is not needed.
Fixed Bitmessage#786
2016-05-02 15:00:21 +02:00
mailchuck
960d446104 Ask before deleting a subscription
Fixes #120
2016-05-02 15:00:21 +02:00
mailchuck
c2970cd92e Update addressbook on changes
Fixes  #99
- enable/disable new/delete chan/subscription
- also found and fixed a logger crash
2016-05-02 15:00:21 +02:00
mailchuck
1f331f217c Messagelist address tooltip
Fixes #108
2016-05-02 15:00:21 +02:00
mailchuck
8909a535ae Remove extra debug logging 2016-05-02 15:00:21 +02:00
mailchuck
dd15d1b6ed Delete key and shift modifier
Addresses #114
- delete from sent works when pressing delete key
- delete from trash deletes rather than moves
- delete with shift deletes rather than moves
2016-05-02 15:00:21 +02:00
mailchuck
cd9a7b5157 Missing folders in rerenderTabTreeSubscriptions
I optimised it too much and sometimes folders were missing in the tree.
2016-05-02 15:00:21 +02:00
mailchuck
d7817ca2ef Smoother rerenderTabSubscriptions
Does not reset it all the time but adds/removes
Fixes #109
2016-05-02 15:00:21 +02:00
mailchuck
231219a193 Improved logging
Fixes #118

- changed almost all "print" into logger
- threads have nicer names
- logger can have configuration in "logger.dat" in the same directory as
"keys.dat", and the logger will pick the one named "default" to replace
the "console" and "file" that are in PyBitmessage otherwise

Example file for logging to syslog:

[loggers]
keys = root,syslog

[logger_root]
level=NOTSET
handlers=syslog

[logger_syslog]
level=DEBUG
handlers=syslog
qualname=default

[handlers]
keys = syslog

[handler_syslog]
class = handlers.SysLogHandler
formatter = syslog
level = DEBUG
args=(('localhost', handlers.SYSLOG_UDP_PORT),
handlers.SysLogHandler.LOG_LOCAL7)

[formatters]
keys = syslog

[formatter_syslog]
format=%(asctime)s %(threadName)s %(filename)s@%(lineno)d %(message)s
datefmt=%b %d %H:%M:%S
2016-05-02 15:00:21 +02:00
Denilson M. Amorim
28f46cb8b3 Dont run twice if daemon too 2016-05-02 15:00:21 +02:00
Denilson M. Amorim
cf610080b9 Squash: Single instance and pop up old instance 2016-05-02 15:00:21 +02:00
mailchuck
46d647460f Version bump
We have 0.5.3 now
2016-05-02 15:00:21 +02:00
mailchuck
2fd85bfa69 SSL workaround
Python < 2.7.9 does not support anonymous SSL server through
ssl.wrap_socket, so we have to disable it. Works fine as client.
Try to prefer secp256k1 curve (again, requires python >= 2.7.9)
2016-05-02 15:00:21 +02:00
mailchuck
049e226ddc Move saving UI state
quit is more appropriate than close event, but it my resurrect the issue
with linux saving config data.
2016-05-02 15:00:21 +02:00
mailchuck
5cb02dc783 Improve blacklist autolabel 2016-05-02 15:00:21 +02:00
mailchuck
1db7635893 OSX build fixes
- include bitmsghash so that it bundles the C library PoW
- include sslkeys so that SSL works in the bundle
- PyBitmessage version now propagated from the shell build script
2016-05-02 15:00:21 +02:00
mailchuck
a02ea14233 Blacklist through context menu
Fixes #101
2016-05-02 15:00:21 +02:00
mailchuck
c7fb9e6a43 SSL fixes
- uses constants for service flags
- requires SSL to use TLSv1 version (protection against POODLE-style
attacks)
- retry if sock.recv incomplete
2016-05-02 15:00:21 +02:00
mailchuck
2f874e41be Fix adding/editing entries in addresbook
It didn't sort correctly and didn't update the label correctly when
changed.
Fixes #95
2016-05-02 15:00:21 +02:00
mailchuck
c804f6c181 Opportunistic encryption with TLS (2 of 2)
These are dummy key and certificates. They are loaded but otherwise not
used. This is a workaround against python's ssl_wrap deficiency, it
won't allow to execute a server-side SSL handshake without a loaded key
+ cert. Since generating key/cert locally would require additional
libraries, I opted for including a dummy one in the source.
2016-05-02 15:00:20 +02:00
mailchuck
53b0d2749b Opportunistic encryption with TLS (1 of 2)
Fixes Bitmessage#264
Fixes Bitmessage#648
2016-05-02 15:00:20 +02:00
mailchuck
25cc1dc287 Unified code for finding source code location
It is already used in 3 places so I put it into a function
2016-05-02 15:00:20 +02:00
mailchuck
ceda22ec94 Private IP range update
Addresses Bitmessage#768
2016-05-02 15:00:20 +02:00
mailchuck
f68627158d Click on inactive tab
Would cause exception.
2016-05-02 15:00:20 +02:00
mailchuck
0e15b246af Fix broadcast
Any normal address should be able to broadcast. Reported over BM in one
of the chans.
2016-05-02 15:00:20 +02:00
mailchuck
10474b3561 Fix sync status sum
Last commit was broken.
2016-05-02 15:00:20 +02:00
mailchuck
79e199b45a Show sync status in Network tab
Addresses Bitmessage#745 (but no API exposure yet)
2016-05-02 15:00:20 +02:00
mailchuck
5b724f366e Prepare for tree widgets to store settings
Precursor for #12
2016-05-02 15:00:20 +02:00
mailchuck
4b88922104 Translation directory for OSX bundles
Addresses bitmessage#514
2016-05-02 15:00:20 +02:00
mailchuck
8f5d177690 Enabling/disabling color propagation
Fixes #105
2016-05-02 15:00:20 +02:00
mailchuck
a85e9ed20e Default message font
Fixes #106 and Bitmesage#248
2016-05-02 15:00:20 +02:00
mailchuck
2947462d45 Unregistering of unregeistered accounts
Since it's unregistered, we don't know where to unregister from.
Fixes #91.
2016-05-02 15:00:20 +02:00
Henrik Olsson
57575d0a39 Fix some typos
Author:    Henrik Olsson <henrik@fixme.se>
2016-05-02 15:00:20 +02:00
mailchuck
1a842730a2 Newly sent messages and status update
- newly sent messages did not appear in all tabs
- message status change didn't work in all tabs
- addresses #90
- however, still new sent message sender/recipient do not have the
correct color
2016-05-02 15:00:20 +02:00
mailchuck
4aaf0048c6 Disabled folder color
Fixes #92
2016-05-02 15:00:20 +02:00
mailchuck
2783a1c1e5 Autofold/unfold when enabling/disabling
Fixes #93
2016-05-02 15:00:20 +02:00
mailchuck
d9401c7180 several bugfixes for rerendertabtree
It was prone to infinite loops, mixing elements etc.
2016-05-02 15:00:20 +02:00
mailchuck
8103874f6e Allow deleting channels
Fixes #96
2016-05-02 15:00:20 +02:00
mailchuck
b74dc569ef Disable "Special address behaviour" in chan
Fixes #97
2016-05-02 15:00:20 +02:00
mailchuck
e9a908aa83 Sqlite secure delete
Fixes #102
2016-05-02 15:00:20 +02:00
mailchuck
12878af41f Fix Py2Exe / Py2App
Fixes the C PoW loading in frozen apps (Windows and OSX)
Cleaner fallback in PoW if something goes wrong
2016-05-02 15:00:20 +02:00
mailchuck
03f709b70d Bump version
get ready for 0.5.2
2016-05-02 15:00:20 +02:00
mailchuck
2921b6553b TTL/send splitter shouldn't save state
Because it also cannot be resized from the UI
2016-05-02 15:00:20 +02:00
mailchuck
83850536cf Do not store search splitter state
It causes problems because it can't be resized through GUI.
2016-05-02 15:00:20 +02:00
mailchuck
3f96962e62 Actually enable saving states
It was temporarily disabled for testing resizing.
Addresses #12
2016-05-02 15:00:20 +02:00
mailchuck
d5743f12b9 More tabs resizable and save state
Fixes #15
Addresses #12
2016-05-02 15:00:20 +02:00
mailchuck
8e650396da Missing library fix
Missing library error wasn't handled correctly.
2016-05-02 15:00:20 +02:00
mailchuck
0a8fdd7eff Compile fixes
- OSX and Windows compile fixes
2016-05-02 15:00:20 +02:00
mailchuck
5a681068fe OpenCL fixes
- directory change
- automatically detect all available GPUs
2016-05-02 15:00:20 +02:00
mailchuck
53ca944483 OSX fixes and default compile
It should built on OSX 10.11 now
It will build bitmsghash.so by default
2016-05-02 15:00:20 +02:00
mailchuck
961444a8ee OpenCL compile warning 2016-05-02 15:00:20 +02:00
mailchuck
ad33e2640c Move and rename OpenCL kernel 2016-05-02 15:00:20 +02:00
d5ec69d3b7 Bitmsghash linux compile fixes 2016-05-02 15:00:20 +02:00
0a09d3580d Make building bitmsghash default 2016-05-02 15:00:20 +02:00
mailchuck
1a3794f3e3 C PoW updates
- move to subdirectory
- get rid of compile warnings on windows
- get number of threads from affinity (Windows, Linux) or core count
(BSD/OSX)
2016-05-02 15:00:20 +02:00
84c9b1dd31 C PoW library makefile
For easy compiling with GNU make (e.g. Unix-like systems).
Run as "make bitmsghash.so"
2016-05-02 15:00:20 +02:00
2869822134 C PoW updates
Catching up with Grant Olson's fork.
Reduce thread priority.
2016-05-02 15:00:20 +02:00
mailchuck
be55af1832 C library for bitmessage PoW
Originally from https://github.com/bm-robertwhite/bitmessage-powfaster.
Modified to compile correctly on Visual Studio, and to decrease thread
priority.
I have not tried it on Linux yet.
2016-05-02 15:00:20 +02:00
mailchuck
e5ee7426eb Support for PoW from an external library
This will attempt to include a PoW library (.so on Unix, .dll on
windows) to do PoW. This is done in a safe way and clean fallback to
normal PoW. The code for the library will be in another commit. The code
is take from https://github.com/bm-robertwhite/bitmessage-powfaster,
with minor modifications.

This patch also includes code to make GPU PoW have a safer fallback.
2016-05-02 15:00:20 +02:00
mailchuck
df3c662832 Message status update
Someone reported the exception via BM. Fixes #90

Signed-off-by: mailchuck <dev@mailchuck.com>
2016-05-02 15:00:20 +02:00
mailchuck
f5f46dae45 Version bump 2016-05-02 15:00:20 +02:00
mailchuck
8eb1b7462a notify of new message fixed
Will notify even if not on active messagelist.
2016-05-02 15:00:20 +02:00
mailchuck
abc2ea2427 Wrong messagelist 2016-05-02 15:00:20 +02:00
mailchuck
0f1d85ff89 Unread count fixes 2016-05-02 15:00:20 +02:00
mailchuck
e84efecb67 getCurrentFolder should return None on unavailable
I think None is better than False.
2016-05-02 15:00:20 +02:00
mailchuck
aafa7b2840 Deleting from sent fix
Fixes #52
2016-05-02 15:00:20 +02:00
mailchuck
33928f1bc7 Trash undelete
Fixes #55
2016-05-02 15:00:20 +02:00
mailchuck
657eeeb1ca Clear message lists better
Fixes #71
2016-05-02 15:00:20 +02:00
mailchuck
d78629a6cf Emptying trash updates
Fixes #75, however it is quite slow
2016-05-02 15:00:20 +02:00
mailchuck
6a95eba8f3 Unread count for trash
MarkUnread assumed all folders are inbox.
2016-05-02 15:00:20 +02:00
mailchuck
b4c920316e Enable/disable dynamic behaviour
Fixes #88
2016-05-02 15:00:20 +02:00
mailchuck
81e8ee1f83 Color fixes in messagelists
Fixes #87
2016-05-02 15:00:20 +02:00
mailchuck
ad63e956cf accountBrush improvements
Moved code into the method
2016-05-02 15:00:19 +02:00
mailchuck
828bf64630 Address book better context menu
Don't allow delete of chans/subscriptions.
Fixes #82
2016-05-02 15:00:19 +02:00
mailchuck
feea1ccd8d Colors for From ComboBox
Fixes #86
2016-05-02 15:00:19 +02:00
mailchuck
0eb89d8af5 Subscription new messages display correctly
Fixes #70
2016-05-02 15:00:19 +02:00
mailchuck
4c8223ae88 Unread count performance optimisation
Continuation of #63
2016-05-02 15:00:19 +02:00
mailchuck
2adfa6a178 Ubuntu notification fixes
Notification should work irrespective of whether the new message shows
up in the messagelist.
2016-05-02 15:00:19 +02:00
mailchuck
1174fb394a Indicate message sending
Fixes #83
2016-05-02 15:00:19 +02:00
mailchuck
6123b27315 removeInboxRowByMsgid fixes
Now undertands messagelists and has better performance.
Haven't tested it yet though because it's triggered through API.
I think it fixes #85
2016-05-02 15:00:19 +02:00
mailchuck
7478440bd6 Update unread count more efficiently
Fixes #63. There are still some situations which can be improved but it
appears good enough.
2016-05-02 15:00:19 +02:00
mailchuck
9abc937cb3 More unified colors in foldertree and messagelists
Some parts still not colored in a unified way.
Fixes #84
2016-05-02 15:00:19 +02:00
mailchuck
6383f48ef2 Show tooltips on addressbook
Fixes #68
2016-05-02 15:00:19 +02:00
mailchuck
63431556be Make subscription/chan labels editable
Fixes #67
2016-05-02 15:00:19 +02:00
mailchuck
77382a2424 Refactoring foldertree
Colors consistent
Sorting more consistent
Deduplication of methods
Context menu enable/disable affects tree
Fixes #73
2016-05-02 15:00:19 +02:00
mailchuck
1c4015d359 Spanish wrongly spelled
Fixes #74
2016-05-02 15:00:19 +02:00
mailchuck
4522ea46d3 Sent in chans and subscriptions columns
Now it shows "from" instead of "to" column when selecting sent folder in
subscriptions or chans.

Fixes #53
2016-05-02 15:00:19 +02:00
mailchuck
2cc7506619 Addressbook contains chans, subscriptions and is sorted
Fixes #5
2016-05-02 15:00:19 +02:00
mailchuck
39dc34b158 Sent folder for chans and subscriptions
Fixes #53
2016-05-02 15:00:19 +02:00
mailchuck
1d86f7a699 Put mailing lists behind normal accounts
Fixes #58
2016-05-02 15:00:19 +02:00
mailchuck
f6bd312dc5 New message in correct tab
Newly arriving messages now appear in the correct tab. Previously it
assumed it was always "Messages" tab. Partially addresses #3.
2016-05-02 15:00:19 +02:00
mailchuck
55b69f2e8b Fix keypress in chan and subscription messagelists
Fixes #65
2016-05-02 15:00:19 +02:00
mailchuck
ab113745bd Remove expletive
That wasn't necessary.
2016-05-02 15:00:19 +02:00
mailchuck
2ec04ede40 Passive version check
Bitmessage will now notify you if it encounters someone with a newer
version. Takes into account that it should not recommend switching from
stable to unstable and vice versa. Also, temporarily treats 0.5 as a
mailchuck fork.

Fixes #43
2016-05-02 15:00:19 +02:00
mailchuck
3ffea81d02 No more Mailchuck Pybitmessage 2nd
Last commit only changed loading, this also saving.
2016-05-02 15:00:19 +02:00
mailchuck
f47d28bb59 There will not be a Mailchuck PyBitmessage anymore
Since I'm merging my fork into normal pybitmessage, there won't be
separate configs.
2016-05-02 15:00:19 +02:00
mailchuck
7625b4f101 Version bump
Just for development
2016-05-02 15:00:19 +02:00
mailchuck
3566b82c9f Special address behaviour updates send comboboxes
Fixes #57
2016-05-02 15:00:19 +02:00
mailchuck
705ffacd8b Changing label updates SendFrom combobox
Fixes #2
2016-05-02 15:00:19 +02:00
mailchuck
d51431b1dc Account listing and sorting
- account listing and sorting has now a common function to reuse
- combobox send from is now sorted, Fixes #59
2016-05-02 15:00:19 +02:00
mailchuck
afeadcf8d2 Switch to tab you're replying from
Fixes #64
2016-05-02 15:00:19 +02:00
mailchuck
059f113d95 Account labels become editable again
Fixes #60
2016-05-02 15:00:19 +02:00
mailchuck
5ac17e456d Fix reply unicode subject
Fixes #62
2016-05-02 15:00:19 +02:00
mailchuck
343b3532c5 Show subscription unread count
Subscriptions were not showing unread count. This commit implements it.
2016-05-02 15:00:19 +02:00
mailchuck
c83255d4d4 Bump up version 2016-05-02 15:00:19 +02:00
mailchuck
7998d77b9c Broadcast sending from was wrong
Fixes #51
2016-05-02 15:00:19 +02:00
mailchuck
5b12f2dffa Chan and subscription trash
Fixes #6
2016-05-02 15:00:19 +02:00
mailchuck
faeaad212d Replies to mailing lists
Attempt to fix #49. Will close after positive feedback.
2016-05-02 15:00:19 +02:00
mailchuck
bf9bdaadc5 Fix reply-to subscriptions and labels
Closes #1
Also attempts to solve #49 but needs testing.
2016-05-02 15:00:19 +02:00
mailchuck
23207749d1 Constant in a separate file
str_broadcast_subscribers should not be specific to the main UI class
2016-05-02 15:00:19 +02:00
mailchuck
9d2e114712 Add BroadcastAccount class
This will help to distinguish between general broadcasts and
subscriptions.
2016-05-02 15:00:18 +02:00
mailchuck
3911525d75 Remember main window geometry and state on exit
Main window geometry and state is saved on exit and restored on load.
Uses default QSettings in python.
2016-05-02 15:00:18 +02:00
mailchuck
b776eb7f36 Formatting change
Was not folding properly in editor, made it more python-like
2016-05-02 15:00:18 +02:00
mailchuck
001ec14d72 Messages tab resizable
- the separator between folder tree and message list is now resizable
- the separator between list of messages and message content is
resizable
- only for message tab, chans, subscriptions and others are still not
resizable
2016-05-02 15:00:18 +02:00
mailchuck
4db1a5ea48 Subscriptions
Initial subscription fix. Still does not always display the list from
the correct folder, and it currently does not update unread count on
subscriptions.
2016-05-02 15:00:18 +02:00
mailchuck
59a562228d Fix
Typo
2016-05-02 15:00:18 +02:00
mailchuck
e10b9cbff4 Resizable fields
Inbox folder/message now resizable
2016-05-02 15:00:18 +02:00
mailchuck
321bf9a6c9 Chan UI fix
Minor chan UI fix. Still not completely smooth but mostly working.
2016-05-02 15:00:18 +02:00
mailchuck
552876e43e Gateway register/unregister changes
- do not register/unregister channels or mailing lists
- send registration/unregistration request irrespective of whether the
client thinks it's registered or not. We don't know for sure it knows it
correctly so don't assume that, it may confuse users
2016-05-02 15:00:18 +02:00
mailchuck
5525176216 Chan updates
- chans now work with the new interface, still some bugs present
- chans do not have a sent folder anymore (you'll see sent messages in
the sent folder of the account you're sending it from)
2016-05-02 15:00:18 +02:00
mailchuck
b8baceb629 Fix: recurse prevention
In case something screws up, prevent recursive changes through
treeWidgetItemChagned
2016-05-02 15:00:18 +02:00
mailchuck
1cab8bf549 Fix: gateway registration updates label
When registering on a gateway, the label change will be displayed
immediately.
2016-05-02 15:00:18 +02:00
mailchuck
ccae351e65 Fix: do not update account name from folder name
Last commit caused changes in unread count of folder to change the
account name. This is now fixed.
2016-05-02 15:00:18 +02:00
mailchuck
80afc489d8 Editable address labels
Address labels can be edited now (F2 or double click)
2016-05-02 15:00:18 +02:00
mailchuck
2bc9c7ff4c Email gateway integration
Sending/receiving from the send tab, reply from inbox and
registration/unregistration context menu.
2016-05-02 15:00:18 +02:00
mailchuck
b4fa5d4abf Gateway update and sort fix
- shows gateway parser results more accurately
- gateway class assigned dynamically
- inbox sort order is aware of what you click on and defaults to
ascending
2016-05-02 15:00:18 +02:00
mailchuck
033be9b5bf Email Gateway UI implementation
First steps, only a tiny part works
2016-05-02 15:00:18 +02:00
mailchuck
83109796fe Address Tree updates
The Address tree now is sorted and updates when number of unread
messages changes.
2016-05-02 15:00:18 +02:00
mailchuck
83a069d1f6 Migration Wizard
- Not fully working yet
- show this wizard and connection confirmation dialog before showing the
main window, and don't open main window until these two have finished or
were canceled
2016-05-02 15:00:18 +02:00
mailchuck
3a294ac672 Fixes
Some pages were initialised with incorrect number of parameters.
2016-05-02 15:00:18 +02:00
mailchuck
9075f3f5e6 OpenCL Fixes
Still not fully working and hardcoded device number
2016-05-02 15:00:18 +02:00
mailchuck
8043f1ae60 Address tree order sort case insensitive 2016-05-02 15:00:18 +02:00
mailchuck
fd7ed893a7 Collapse disabled accounts 2016-05-02 15:00:18 +02:00
mailchuck
a961ad1d84 Formatting 2016-05-02 15:00:18 +02:00
mailchuck
9ab9984283 Order reverse
Disabled addresses should go at the end, not at the beginning.
2016-05-02 15:00:18 +02:00
mailchuck
cae03d66df Typo fix 2016-05-02 15:00:18 +02:00
mailchuck
f2e9b3467f Address tree sorting
Sorts addresses in the address tree
2016-05-02 15:00:18 +02:00
mailchuck
8882912bf3 New address wizard
Not working yet, just UI
2016-05-02 15:00:18 +02:00
mailchuck
324dbfb81a Migration Wizard
- from standard PyBitmessage to this one
- not working yet
2016-05-02 15:00:18 +02:00
mailchuck
9a6db480bd Typo 2016-05-02 15:00:18 +02:00
mailchuck
b4fad5c49a Shorten trashed summary
Trash UI now exists, there is no need to tell the user it doesn't.
2016-05-02 15:00:18 +02:00
mailchuck
3888eb11be UI fix
All new messages appeared in current account message list, as opposed to
only new messages associated with that account.
2016-05-02 15:00:18 +02:00
mailchuck
2b1222f970 Fix: UI 2016-05-02 15:00:18 +02:00
Peter Surda
bde5bfc42e Add: re-merge API changes
API handler was rewritten in upstream, previous merge
overwrote the changse. This re-enables them.
2016-05-02 15:00:17 +02:00
Peter Surda
d3345e051a Add: debugging for freezing api call 2016-05-02 15:00:17 +02:00
lightrabbit
f0f9f679e6 Add UPnP support. 2016-05-02 15:00:17 +02:00
Peter Surda
bd7c3e6e01 Reverted the code that tried to randomise starting PoW position.
The problem wasn't caused by the starting position but by an int
being interpreted as a string. Fixed in upstream and merged.
2016-05-02 15:00:17 +02:00
Peter Surda
69309b82fb Minor changes in cli, PoW, and a couple of new api calls. 2016-05-02 15:00:17 +02:00
sbkaf
800fd2a143 finished implementing more email client like interface 2016-05-02 15:00:17 +02:00
sbkaf
f6f68dc975 start changing QTreeWiget 2016-05-02 15:00:17 +02:00
sbkaf
4763fb1238 merge 2016-05-02 15:00:17 +02:00
sbkaf
585873e4f3 interface 2016-05-02 15:00:17 +02:00
sbkaf
44414c2e88 make interface look more like an e-mail programm, not yet functional 2016-05-02 15:00:17 +02:00
8198e1922a Added a CLI interface to the daemon from
https://github.com/Dokument/PyBitmessage-Daemon/raw/master/daemon.py
2016-05-02 15:00:17 +02:00
1796c20887 Merge OpenCL code and make OpenCL auto-detectable 2016-05-02 15:00:17 +02:00
Jonathan Warren
72ea076099 Merge pull request #807 from Erkan-Yilmaz/patch-2
typo
2015-07-28 11:44:37 -04:00
Erkan Yilmaz
0fe6562440 typo 2015-07-28 07:19:47 +02:00
Erkan Yilmaz
de67b9f0c6 typo (missing char: n) 2015-07-25 12:54:33 +02:00
Jonathan Warren
4403cde52b Fix issue #804 2015-07-15 11:56:24 -04:00
Jonathan Warren
f84d848e06 Merge branch 'master' of github.com:Bitmessage/PyBitmessage 2015-07-15 11:34:23 -04:00
Jonathan Warren
37e8d01c29 Merge pull request #790 from timothyparez/development
Refactored the code in api.py
2015-07-01 15:49:36 -04:00
Jonathan Warren
b50797d5b8 Merge pull request #789 from Erkan-Yilmaz/patch-2
two typos
2015-07-01 15:37:21 -04:00
Jonathan Warren
18df8e9561 Merge pull request #788 from Erkan-Yilmaz/patch-1
typo
2015-07-01 15:36:41 -04:00
Jonathan Warren
05182e7465 Make data send rate more accurate 2015-07-01 15:26:23 -04:00
Jonathan Warren
6ebf8666dc support SHA256 signatures 2015-03-27 15:25:32 -04:00
Timothy
2dfce7f5e7 Refactored the code in api.py by extracting the handler code for each request to separate methods
This should result in code that is easier to understand, modify and maintain
2015-03-21 19:53:09 +08:00
Timothy
08f2c3bfc0 Revert "Refactored the code in api.py by extracting the handler code for each request to separate methods"
This reverts commit 2ebf716941.
2015-03-21 19:50:04 +08:00
Timothy
2ebf716941 Refactored the code in api.py by extracting the handler code for each request to separate methods
This should result in code that is easier to understand, modify and maintain
2015-03-21 19:45:56 +08:00
Jonathan Warren
ba27f6e8a6 Made error message for Raspberry Pi users less serious-sounding 2015-03-19 18:09:04 -04:00
Erkan Yilmaz
8473703bfc two typos 2015-03-17 22:38:58 +01:00
Erkan Yilmaz
f0c207e6b7 typo 2015-03-17 22:34:54 +01:00
Jonathan Warren
4622d952e4 update list of defaultKnownNodes 2015-03-09 22:33:46 -04:00
Jonathan Warren
ce9480ab57 forgot a question mark character in a sql query 2015-03-09 02:42:28 -04:00
Jonathan Warren
cc712cb8ff finished work on specifyTTL 2015-03-09 02:35:32 -04:00
Jonathan Warren
9044e84093 some specifyTTL work completed 2015-03-03 14:04:12 -05:00
Jonathan Warren
3d82652d15 Merge pull request #782 from felidosz/master
german translation and tray icon
2015-02-27 14:52:09 -05:00
Jonathan Warren
95bcce1d0c Merge pull request #760 from themighty1/minimize-to-tray-linux
fix minimize-to-tray linux
2015-02-21 21:16:20 -05:00
Jonathan Warren
d82eb8b11f Merge pull request #766 from fanquake/use-https-link-in-help
Use https link in help message dialog
2015-02-21 20:23:30 -05:00
sbkaf
e6179fb953 minimize on tray icon click: enabled for linux (if removed) 2015-02-21 14:24:17 +01:00
sbkaf
a68a211d5c german translation 2015-02-21 14:21:11 +01:00
Jonathan Warren
95c939a2a0 Fix #748 - Check hash of sig instead of message contents 2015-02-20 21:03:20 -05:00
Jonathan Warren
3527983fa6 Minor refactoring 2015-02-20 17:33:17 -05:00
Jonathan Warren
642c5858f4 handle OpenSSL.EC_KEY_get0_group() exception 2015-02-06 16:31:23 -05:00
Jonathan Warren
d0676233ed Merge pull request #771 from Atheros1/master
Various fixes
2015-01-28 15:07:41 -05:00
Jonathan Warren
0c7330f900 fix misbehaving logger.warning line 2015-01-28 14:45:29 -05:00
Jonathan Warren
bd9286ef41 msg objects now contain an objectVersion 2015-01-28 14:14:28 -05:00
Jonathan Warren
5b87bc26ec Fix #758 2015-01-21 12:38:25 -05:00
Michael Ford
e425c6d927 Use https link in help message dialog 2015-01-14 22:45:02 +08:00
Jonathan Warren
d16077b109 Merge pull request #762 from Atheros1/master
Fix #761
2015-01-08 17:12:52 -05:00
Jonathan Warren
630654da16 Fix #761 2015-01-08 17:11:30 -05:00
Jonathan Warren
f7c2aa0e4a Improve default text seen after changing UI language 2015-01-08 17:08:35 -05:00
Andrew Lott
f645dad56c Update bitmessage_nl.ts
added some unfinished tranlations
2015-01-08 00:33:04 +00:00
themighty1
c379978f3e fix minimize-to-tray linux 2015-01-07 01:57:20 +03:00
digital dreamer
c1784bb533 Retranslate context menus after language switch 2014-12-28 11:42:38 +01:00
Jonathan Warren
0c0e0e527b Merge pull request #753 from Atheros1/master
Czech translation
2014-12-25 23:25:54 -05:00
Jonathan Warren
8b95ad1659 updated settings.ui file for Czech translation 2014-12-25 23:24:09 -05:00
Jonathan Warren
e4cbf6f4a4 Merge branch 'czech' of https://github.com/digital-dreamer/PyBitmessage into digital-dreamer-czech 2014-12-25 23:14:54 -05:00
Jonathan Warren
7a203fe803 Merge pull request #740 from noffle/blacklist_api
Blacklist API
2014-12-25 22:12:42 -05:00
Jonathan Warren
4aded87837 Merge pull request #736 from digital-dreamer/translate-without-restart
Change interface language without restart
2014-12-25 21:35:22 -05:00
Jonathan Warren
2621f38b11 Merge pull request #735 from themighty1/ui-freeze-fix
dont freeze UI when mass-marking unread
2014-12-25 21:23:49 -05:00
Jonathan Warren
b79953d889 Merge pull request #731 from fanquake/remove_semicolon
Remove trailing semicolon in __init__.py
2014-12-25 21:16:36 -05:00
Jonathan Warren
9b6bc26144 fix bug in #715 2014-12-25 21:06:10 -05:00
Jonathan Warren
50c392c197 resolve merge conflict 2014-12-25 20:37:04 -05:00
bmng-dev
29e75ac7c6 Update the required Python version to 2.7.3 2014-12-25 19:48:07 -05:00
bmng-dev
23b55652b9 New depends module to check dependencies. Moved version check to new depends module. 2014-12-25 19:48:05 -05:00
Jonathan Warren
3ef83c2f95 Leftover change from clearing ProtoV2 code: increment settings version from 7 to 8 2014-12-25 19:23:16 -05:00
Jonathan Warren
e898b40203 Removed obsolete Protocol v2 code 2014-12-25 04:06:57 -05:00
digital dreamer
345303a560 Add Czech translation 2014-11-30 15:13:48 +01:00
Stephen Whitmore
e93d23d2e0 Adds new API error codes for black-/white-list manipulation.
Refactors loadBlackWhiteList into more generic rerenderBlackWhiteList
2014-11-22 13:56:41 -08:00
Stephen Whitmore
afb21ca307 Adds API commands for blacklist manipulation. 2014-11-22 13:13:35 -08:00
digital dreamer
011099b5db Change interface language without restart 2014-11-14 12:21:18 +01:00
Jonathan Warren
b02a5d3109 Merge pull request #734 from Atheros1/master
acknowledgement EOL time: 2.5 days
2014-11-13 16:41:08 -05:00
Jonathan Warren
38b861033d acknowledgement EOL time: 2.5 days 2014-11-13 16:32:31 -05:00
digital dreamer
80fa32de41 Fix #417 - bad relative path breaks translations 2014-11-12 11:31:15 +01:00
Michael Ford
9ca1f87d79 Remove trailing semicolon in __init__.py 2014-10-24 10:39:34 +08:00
themighty1
88efb92c15 dont freeze UI when mass-marking unread 2014-10-20 18:46:56 +03:00
Jonathan Warren
713ed89467 Bugfix: infinite loop if our max acceptable difficulty is too low 2014-10-15 17:16:27 -04:00
Jonathan Warren
fdb0d1e776 Merge branch 'master' into ProtoV3 2014-10-14 14:28:26 -04:00
Jonathan Warren
61653bdc0d Revert "Catch the standard Unix SIGTERM kill signal and do a graceful shutdown" 2014-10-14 14:25:13 -04:00
Jonathan Warren
e096c37f7e save debug.log in correct directory 2014-10-13 01:59:16 -04:00
Jonathan Warren
b6e0396333 resolve minor merge conflict with master 2014-10-12 23:33:09 -04:00
Jonathan Warren
6e9f6d54d2 Merge pull request #709 from JonathanCoe/master
Catch the standard Unix SIGTERM kill signal and do a graceful shutdown
2014-10-12 23:31:01 -04:00
Jonathan Warren
bcb05419db updated defaultKnownNodes 2014-10-12 23:22:21 -04:00
Jonathan Warren
a480fd4f3d After upgrade period, also support old v2 addresses 2014-10-01 19:55:23 -04:00
Yuri
5beaeff2e2 TImestamped the keys.dat backup file. 2014-09-16 10:04:56 -07:00
Yuri
d3c91eea3b Added backup copy creation during keys.dat write to prevent an accidental file loss due to the disk failure. 2014-09-14 23:53:21 -07:00
Yuri
34824c044e Moved all keys.dat writing code into writeKeysFile in shared.py 2014-09-14 23:34:33 -07:00
Jonathan Warren
0865e863ec Added ability to limit network transfer rate 2014-09-10 16:47:51 -04:00
Michael Ford
6273ec6444 Increment version number to 0.4.3 2014-09-05 11:48:59 +08:00
Jonathan Warren
c84cdecba4 Normalize the noncetrialsperbyte and payloadlengthextrabytes for each of the user's existing addresses 2014-09-02 19:25:03 -04:00
Benoît HERVIER
388bc6ba04 #708 : Use default locale encoding
Use locale endoding else this generate error in GU : as default time format can have non ascii char on non english locale, but using ascii in locale can generate UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 :

In PyBitmessage/src/bitmessageqt/__init__.py"
    l10n.formatTimestamp())

In PyBitmessage/src/l10n.py", line 81, in formatTimestamp
    return unicode(timestring, encoding)
2014-08-28 13:39:40 +02:00
Jonathan Warren
90800af729 very minor improvements to ProtoV3 2014-08-27 19:17:47 -04:00
Jonathan Warren
c306062282 Bitmessage Protocol Version Three 2014-08-27 03:14:32 -04:00
JonathanCoe
3b42805efc Catch the standard Unix SIGTERM kill signal and do a graceful shutdown of PyBitmessage.
We already do this for the SIGINT kill signal. The change allows us to do a clean
shutdown of PyBitmessage when its process has been separated from the terminal.
2014-08-26 13:55:42 +02:00
bmng-dev
33800064c7 Update l10n to ensure decoding actually works
Fix for encoding issue in #706
2014-08-16 04:23:30 +00:00
bmng-dev
0a2fb54f78 Fix l10n.formatTimestamp so it accepts strings 2014-08-08 04:38:23 +00:00
bmng-dev
0d2c94f060 Fix l10n so getTranslationLanguage always returns a string 2014-08-08 01:34:57 +00:00
Jonathan Warren
e58ac560de Merge pull request #701 from bmng-dev/Issue-#691
Fixes issue #691
2014-08-06 17:25:40 -04:00
Jonathan Warren
ea6f34ade6 removed use of memoryview so that we can support python 2.7.3 2014-08-06 15:54:59 -04:00
bmng-dev
269506ff8f New localization module (l10n)
Resolves #691
2014-08-06 02:01:01 +00:00
Jonathan Warren
d2f988e7ac Merge pull request #700 from Atheros1/master
increment version number to 0.4.3
2014-08-04 18:37:53 -04:00
Jonathan Warren
807f2fee8a increment version number to 0.4.3 2014-08-04 18:35:26 -04:00
Jonathan Warren
51d73f0eba Merge pull request #694 from antius/master
Change decodeBase58
2014-08-01 17:41:10 -04:00
Jonathan Warren
9e16e81283 resolve merge conflict and show transfer rate 2014-08-01 17:25:47 -04:00
Jonathan Warren
0820578452 Merge pull request #696 from bmng-dev/Issue-#689
Improve version check.
2014-07-29 13:57:48 -04:00
Jonathan Warren
fbfbbf68b5 support pyelliptic's updated HMAC algorithm 2014-07-29 03:35:23 -04:00
bmng-dev
4430ed0cb5 Improve version check
Move version check so it is the very first thing we do.
Perform version check for all platforms
Ensure backwards and forwards compatibility
2014-07-29 06:51:59 +00:00
The Antius
6a68a0c8b6 Change decodeBase58 2014-07-27 03:31:45 +02:00
Jonathan Warren
b41fb616ae ignore duplicate messages 2014-07-26 13:15:28 -04:00
Ruben de Vries
c8bf3ccc63 moved the check for PyQt so that we don't need to install it when running -c 2014-07-15 17:32:00 +02:00
Jonathan Warren
82fd241450 Merge pull request #681 from sandakersmann/patch-1
Bug fix for bitmessage_no.ts
2014-07-14 19:46:20 -04:00
Jonathan Warren
ce62294975 Merge pull request #679 from enikesha/htmlfix
Fix unicode handling in 'View HTML code as formated text'. Fixes #667
2014-07-14 19:45:15 -04:00
Jonathan Warren
a2a7edc9be resolve merge conflict 2014-07-14 19:29:47 -04:00
Jonathan Warren
254bac6b32 minor change to 'addDataPadding' commit 2014-07-14 14:15:38 -04:00
Jonathan Warren
f6bab3918c Merge pull request #668 from antius/master
Make addDataPadding method to avoid clutter.
2014-07-14 14:12:07 -04:00
Jonathan Warren
e3124e1b2c Merge pull request #666 from piluke/master
Add a curses terminal interface as an alternative to QT
2014-07-14 14:06:21 -04:00
Yuri
f05bcdb829 Made sent/received byte counts to be in human readable format. 2014-07-11 11:12:58 -07:00
Yuri
f107b0fbd9 Addition of bytes received/sent counts on the network information tab. 2014-07-07 13:30:23 -07:00
sandakersmann
bf7f58efd5 Bug fix for bitmessage_no.ts
Bug fix for bitmessage_no.ts ("nb" corrected to "no")
2014-06-10 07:59:37 +02:00
bmng-dev
be5ab22d16 Fix name error 2014-06-08 14:07:28 +00:00
bmng-dev
1f9991bcd0 Fix syntax error 2014-06-08 14:03:58 +00:00
Innocenty Enikeew
51b9a59719 Optimizations and better newlines handling 2014-06-03 09:45:59 +04:00
Innocenty Enikeew
c848d55462 Fix unicode handling in 'View HTML code as formated text'. Fixes #667 2014-06-02 21:10:18 +04:00
bmng-dev
97647f23a6 Refactor header generation
Modify generateFullAckMessage to use shared.CreatePacket
2014-05-22 16:33:42 +00:00
bmng-dev
1f75047223 Refactor generation of packet headers 2014-05-22 16:21:20 +00:00
bmng-dev
0f9625aac7 Refactor packet header extraction and generation
Demote payloadLength from class instance variable to processData local variable as no other function was using it
Improve processData:
 -Utilise shared.Header
 -Use a memoryview to reduce memory overhead
 -Clean up variables before a recursive call
 -Strip null bytes from command
Refactor sendData
Various functions:
 -Use shared.CreatePacket to generate packets
Fix typo in _checkIPv4Address
2014-05-22 15:57:48 +00:00
bmng-dev
ccfbe8da47 Refactor handling of packet headers
Refactored ackDataHasAVaildHeader:
 -shared.Header is used as necessary
 -avoided slicing wherever possible
 -remove trailing null characters when comparing command strings
 -don't calculate the checksum of a large payload
2014-05-22 13:08:30 +00:00
bmng-dev
947f7655ab Refactor generation of packet headers
Added global variable Header - a compiled Struct to pack/unpack headers so as to avoid repeatedly compiling the same format string
Add a new method CreatePacket to simply and efficiently construct a packet that is ready to be sent
Modify assembleVersionMessage to use CreatePacket
2014-05-22 12:30:51 +00:00
bmng-dev
9b40838f25 Use pointMult instead of arithmetic.privtopub
pointMult is faster than the pure python arithmetic.privtopub

Additionally in makeCryptor the call to a.privtopub could have just simply be changed to call the local privToPub but then privkey would have been dehexified twice (once in makeCryptor, then again in privToPub) and privToPub would have hexified its result only for makeCryptor to immediately dehexify it. This sort of unnecessary hexifying/dehexifying seems to occur throughout PyBitmessage.
2014-05-21 11:08:15 +00:00
bmng-dev
b1261a6c0e Move pointMult to highlevelcrypto
Update pointMult calls to highlevelcrypto.pointMult
2014-05-21 10:15:07 +00:00
bmng-dev
19deff7c75 Move pointMult to highlevelcrypto
Remove pointMult from class_addressGenerator
Update pointMult calls to highlevelcrypto.pointMult
2014-05-21 10:06:20 +00:00
bmng-dev
ecf78801bf Move pointMult function to highlevelcrypto
Copy pointMult function from class_addressGenerator.py to highlevelcrypto.py
2014-05-21 09:59:08 +00:00
Jonathan Warren
033370472e Merge pull request #670 from Atheros1/master
Dutch translation
2014-05-19 16:04:32 -04:00
Jonathan Warren
b97a65391c added dutch translation option to settings dialog 2014-05-19 16:01:46 -04:00
Jonathan Warren
8ed4ba8670 Merge branch 'master' of git://github.com/lazlolazlolazlo/PyBitmessage into lazlolazlolazlo-master 2014-05-19 14:04:17 -04:00
antius
41ba921626 Simplify and optimize 2014-05-02 18:47:50 +02:00
antius
53a3d1635a Make addDataPadding method to avoid clutter. 2014-05-02 16:46:36 +02:00
Luke Montalvo
cc5301327c * A few minor changes including accidentally unappended code
* Fix sending as a chan address
2014-04-30 21:00:02 -05:00
Luke Montalvo
276b8d3125 Merge branch 'master' of https://github.com/Bitmessage/PyBitmessage 2014-04-30 19:09:29 -05:00
Luke Montalvo
d4327cef81 + Add text wrapping to message viewer
* Move global variable declaration to prevent warnings
* Fix Address Book and Subscriptions entry prepending
* Fix shared.fixPotentiallyInvalidUTF8Data() corrupting sent subjects and message bodies
2014-04-30 19:03:12 -05:00
Jonathan Warren
84bd40bd57 Merge pull request #642 from fyahfox/master
Update bitmessage_de.ts
2014-04-30 18:51:34 -04:00
Jonathan Warren
a49ab786bb resolve merge conflict 2014-04-30 18:48:00 -04:00
Jonathan Warren
38d7db24ad Merge pull request #639 from bpeel/wip/trusted-peer
Add a 'trustedpeer' option to keys.dat
2014-04-30 17:42:28 -04:00
Jonathan Warren
e2e79362af Merge pull request #638 from IZARTeam/master
Add zh_cn translations in class_singleWorker.py
2014-04-30 16:51:58 -04:00
Jonathan Warren
a94d995f76 Merge pull request #633 from domob1812/email-quoting
Optionally reply below quote (email style)
2014-04-30 16:49:06 -04:00
Jonathan Warren
22934441dc Fix #662 - 'PyBitmessage does not wait for verack' 2014-04-30 15:39:25 -04:00
Jonathan Warren
12d131f7f2 Fixed minor label problem during init 2014-04-30 12:44:16 -04:00
Luke Montalvo
196047b2ed + Add Sent, Subscription, and Blacklist tab functionality
+ Add code to delete address from Your Identities
+ Add code to load Sentbox, Subscriptions, and Blacklist
* Lengthen column width from 30 to 40 to better fit unlabeled addresses and long subject lines
* Fix row overflow support
* Reorder Dialog initialization to remove duplicate code
* Add reply argument to sendMessage()
* Add newline to Move to Trash message
* Replace Your Identities address copy option with an option to send a message
2014-04-29 21:45:41 -05:00
Luke Montalvo
c3feb54b7b + Add lists for each tab requiring a large table
+ Add function ascii() to strip non-ASCII characters
+ Add Inbox, Send, and Address Book tabs support
+ Add Home and End key handling to allow skipping to the top or bottom of tables
+ Add sendMessage() function so replies are easier and code is not duplicated
+ Add screen clear before initial draw in order to get rid of the default background color
* Fix resetlookups() by allowing access to global inventorydata
* Shorten resetlookups() Timer to 1 second
* Fix table display when output requires scrolling
* Change table column width from 50 to 30
- Remove conditional naptime by using blocking input with 1 second timeout
- Remove stderr capturing for development purposes
2014-04-29 00:10:33 -05:00
Luke Montalvo
01003fc56c Merge branch 'master' of https://github.com/Bitmessage/PyBitmessage 2014-04-29 00:09:30 -05:00
Jonathan Warren
114ba4e23a slightly modify IPv6 modifications so that IPv4-only hosts properly handle v6 IPs 2014-04-27 18:05:43 -04:00
Luke Montalvo
7d10d2aa2a + Fix CPU hogging by implementing tab-based refresh improvements
* Make tables more distinct with horizontal lines
- Remove start_color() because wrapper() does it anyway
2014-04-19 14:57:04 -05:00
Luke Montalvo
813f4c7ed9 + Add dependency list
+ Add stderr capturing
+ Add identities and network status tabs
+ Add dialogs to configure identities
+ Add color pair definitions
+ Add the '-c' flag to use the curses interface
* Reorganize imports
* Switch logger to file_only mode when running with curses
2014-04-19 13:45:37 -05:00
Luke Montalvo
63c9f751a9 + Add beginning code for an alternative curses interface 2014-04-18 00:48:42 -05:00
Daniel Kraft
eef2176bfa Merge branch 'master' into email-quoting 2014-04-06 15:46:05 +02:00
Neil Roberts
7da6ea958f Add support for IPv6
It will now listen on an IPv6 socket if possible or fall back to IPv4
if that doesn't work. It will no longer filter out all IPv6 addresses
and instead it will only filter out those that point to the local
network.

It looks like the DNS bootstrapping should just automatically work
because getaddrinfo already returns IPv6 addresses from the AAAA
record.

In order to convert from the ASCII representation of IPv6 addresses
and back we need inet_ntop and inet_pton. Python 2 doesn't currently
provide these for Windows so instead this patch provides a hot patch
to the socket module which wraps WSAStringToAddress and
WSAAddressToString using ctypes.
2014-03-12 01:48:48 +00:00
Jonathan Warren
700e3d1f17 Merge pull request #629 from yurivict/translations
Corrected Russian translations (e->ё, commas, spelling, formal style)
2014-03-04 18:03:40 -05:00
Lazlo Westerhof
7f01887365 Add dutch translation files 2014-02-27 13:17:21 +01:00
fyahfox
272364ce7b Update bitmessage_de.ts
added some translations
typo
2014-02-09 14:22:28 +01:00
fyahfox
928d9501cc Update bitmessage_de.ts 2014-02-08 18:41:33 +01:00
fyahfox
ff36037df9 Update bitmessage_de.ts
typo
2014-02-08 18:40:02 +01:00
fyahfox
fd6fd0719f Update bitmessage_de.ts
typo line 1296
2014-02-08 17:46:17 +01:00
goldbook
cfb1c079c5 add language option 2014-02-08 12:02:19 +09:00
goldbook
61d4e0889f complete translation to japanese 2014-02-08 11:35:51 +09:00
goldbook
a34442d637 add more translation. 2014-02-07 00:47:04 +09:00
Neil Roberts
03263156de Add a 'trustedpeer' option to keys.dat
If this option is specified in keys.dat then Bitmessage will connect
to the host specified there instead of connecting to the hosts in the
list of known nodes. It will also stop listening for incoming
connections and the timing attack mitigation will be disabled.

The expected use case is for example where a user is running a daemon
on a dedicated machine in their local network and they occasionally
want to check for messages using a second instance of the client on
their laptop. In that case it would be much faster to catch up with
the messages by directly downloading from the dedicated machine over
the LAN. There is no need to connect to multiple peers or to do the
timing attack mitigation because the daemon is trusted.

The host is specified as hostname:port. Eg, ‘192.168.1.8:8444’.
2014-02-06 13:16:07 +00:00
IZARTeam
1204442fcd Add zh_cn translations in class_singleWorker.py
And fix some mistakes in Chinese translation
2014-02-06 03:31:51 +08:00
Jonathan Warren
44f31d7bf9 Merge pull request #637 from Atheros1/master
Ignore, and don't save to memory, messages larger than 20MB (temporary)
2014-02-04 23:47:59 -08:00
Jonathan Warren
0de659a04a Ignore, and don't save to memory, messages larger than 20MB (temporary) 2014-02-05 02:45:10 -05:00
goldbook
e63276c240 add japanese transration. 2014-02-01 17:15:50 +09:00
Daniel Kraft
6326147d6f Make reply below quote opt-in.
Add a new preference for 'reply below quote' and only use the new
quoting style if it is set.
2014-01-28 20:57:01 +01:00
Daniel Kraft
5c1e1206ef Use patch for email-like quoting with '>' chars.
Apply the patch from https://github.com/Bitmessage/PyBitmessage/pull/271
for email-like "reply below text" with '>' quoting.  The patch is
slightly modified compared to the referenced pull request.
2014-01-28 20:38:54 +01:00
Yuri
eb2a82295a Corrected Russian translation. 2014-01-24 20:14:51 -08:00
flaskevann
bbed86921b Major update of bitmessage_no.ts
I considered this file to be done already and assumed that the huge amount of mixed english and norwegian inside the gui was somebodys elses fault. But after mocking about with Python the entire day I found that I was wrong. I couldn't even get the ts file to compile into a qm to begin with, but everything should be fine now.
2014-01-23 20:51:05 +01:00
Jonathan Warren
8c7031f56d changed 2013 to 2014 in copyright notices 2014-01-21 22:41:48 -05:00
Jonathan Warren
917e27c19b minor change to new function isOurOperatingSystemLimitedToHavingVeryFewHalfOpenConnections 2014-01-21 01:17:36 -05:00
Jonathan Warren
7983a14754 Increment version number to 0.4.2 2014-01-20 23:04:41 -05:00
Jonathan Warren
c98ca590a8 Fix #566 2014-01-20 15:25:02 -05:00
Jonathan Warren
89d778528a changed the Chinese translation of 'Chinese' to the simplified version 2014-01-20 14:30:47 -05:00
Jonathan Warren
d72e9c1015 add missing import 2014-01-20 13:45:21 -05:00
Jonathan Warren
1dd9369400 Merge pull request #621 from flaskevann/patch-12
Update bitmessage_en_pirate.ts
2014-01-20 09:57:19 -08:00
Jonathan Warren
af99a12198 Merge pull request #620 from flaskevann/patch-11
Update bitmessage_de.ts
2014-01-20 09:57:14 -08:00
Jonathan Warren
7563496af0 Merge pull request #619 from flaskevann/patch-10
Update bitmessage_eo.ts
2014-01-20 09:57:10 -08:00
Jonathan Warren
0e92f1946e Merge pull request #618 from flaskevann/patch-9
Update bitmessage_fr.ts
2014-01-20 09:57:05 -08:00
Jonathan Warren
e5451f8b59 Merge pull request #617 from flaskevann/patch-8
Update bitmessage_no.ts
2014-01-20 09:56:59 -08:00
Jonathan Warren
9d744f5c4f Merge pull request #616 from flaskevann/patch-7
Update bitmessage_ru.ts
2014-01-20 09:56:48 -08:00
Jonathan Warren
90ee1d7df9 Merge pull request #615 from flaskevann/patch-6
Update bitmessage_zh_cn.ts
2014-01-20 09:56:42 -08:00
Jonathan Warren
bc94af3e52 Merge pull request #614 from flaskevann/patch-5
Update settings.ui
2014-01-20 09:56:36 -08:00
Jonathan Warren
9196fd0b35 Merge pull request #613 from flaskevann/patch-3
Update settings.py
2014-01-20 09:55:04 -08:00
Jonathan Warren
85a409636a Fix #611; also swap print statements out for loggers 2014-01-16 20:10:04 -05:00
flaskevann
6866349b8c Update bitmessage_en_pirate.ts
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:54:25 +01:00
flaskevann
68f30fc6ec Update bitmessage_de.ts
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:53:50 +01:00
flaskevann
970e94616a Update bitmessage_eo.ts
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:51:55 +01:00
flaskevann
1ceae047af Update bitmessage_fr.ts
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:50:53 +01:00
flaskevann
01ebb9ff19 Update bitmessage_no.ts
Tiny change, only a comma less
2014-01-16 15:49:55 +01:00
flaskevann
231c32d282 Update bitmessage_ru.ts
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:43:22 +01:00
flaskevann
3f6b4b9289 Update bitmessage_zh_cn.ts
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:42:19 +01:00
flaskevann
8f784522c9 Update settings.ui
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:38:31 +01:00
flaskevann
020fb498ca Update settings.py
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:37:07 +01:00
Jonathan Warren
d2138ba8e1 Added Chinese translation to settings options box 2014-01-12 20:24:30 -05:00
Jonathan Warren
5fb8f6eb57 Merge pull request #605 from Almehrezi/master
Arabic language translation
2014-01-12 17:06:21 -08:00
Jonathan Warren
c177308906 Merge pull request #598 from flaskevann/patch-4
Update bitmessage_no.ts
2014-01-12 17:01:10 -08:00
Jonathan Warren
0b81e9b206 rename bitmessageapi.py to api.py 2014-01-12 19:56:30 -05:00
Jonathan Warren
6af92a5e09 fix line which keeps user from running more than once Bitmessage instance 2014-01-12 19:50:44 -05:00
Jonathan Warren
d150476e98 Added comments and console output to expain that you cannot run bitmessageapi.py directly 2014-01-12 19:30:01 -05:00
Xiaokang Wang
9ebfd2a42f Fixed mistake in Chinese translation 2014-01-07 19:22:40 +08:00
Xiaokang Wang
2a80c85634 Modifyed __init__.py in order to enum Chinese 2014-01-07 19:02:41 +08:00
Xiaokang Wang
952ce2cb3c Fixed mistake in Chinese translation 2014-01-07 18:46:14 +08:00
Xiaokang Wang
e11290f652 Fixed mistake in Chinese transltion 2014-01-07 11:35:40 +08:00
Xiaokang Wang
271c20e607 Created project file 2014-01-07 11:11:10 +08:00
Xiaokang Wang
b9da1aa33f Released Chinese(CHS) translation 2014-01-07 11:07:39 +08:00
Xiaokang Wang
d96b03e40e Finished Chinese(CHS) translation 2014-01-07 11:02:50 +08:00
Abdulla Almehrezi
075541347d Arabic language translation 2014-01-07 00:28:42 +04:00
flaskevann
40a727ebd2 Update bitmessage_no.ts
Fixed all the special chars and translated the new lines at the bottom.
2014-01-03 21:19:27 +01:00
Eino Mäkitalo
baf634f89b Merge with original upstream changes
Conflicts:
	src/bitmessagemain.py
2013-12-30 10:55:06 +02:00
Jonathan Warren
a756e4459d Merge pull request #595 from Atheros1/master
fix #590
2013-12-29 19:38:38 -08:00
Jonathan Warren
61389b64aa fix #590 2013-12-29 22:36:23 -05:00
Eino Mäkitalo
a7b4d36bdc Merge branch 'master' of https://github.com/eino-makitalo/PyBitmessage.git
Conflicts:
	src/bitmessageapi.py
2013-12-30 02:57:30 +02:00
Eino Mäkitalo
b0c582605f Cleaning imports and separating API to another file. PyLint fixes for main file 2013-12-30 02:53:44 +02:00
Eino Mäkitalo
5fe54f9556 Cleaning imports and separating API to another file. PyLint fixes for main file 2013-12-30 02:49:27 +02:00
Jonathan Warren
08b92541c6 Merge pull request #588 from BioGeek/patch-1
remove duplicate code
2013-12-29 15:35:11 -08:00
Jonathan Warren
9fdff73ee1 simplify last commit 2013-12-25 01:48:01 -05:00
Jonathan Warren
3c00a443ae added error handling to previous commit: populate 'from' combo box when replying 2013-12-25 01:30:39 -05:00
Jonathan Warren
519a0a4779 Merge branch 'populatefromfield' of git://github.com/bikash617/PyBitmessage into bikash617-populatefromfield 2013-12-25 01:05:56 -05:00
Jonathan Warren
534e98e816 Merge pull request #578 from b4tman/master
fix AppdataFolder encoding on windows
2013-12-24 21:53:41 -08:00
Jonathan Warren
2ca0fed227 fix error during fixing of merge conflict 2013-12-25 00:46:14 -05:00
Jonathan Warren
c18ee8e803 resolve merge conflict 2013-12-25 00:42:31 -05:00
Jonathan Warren
12adccf965 Merge pull request #576 from yurivict/tray_inbox_unread_indicator
[NEW FEATURE] Implemented the indicator in tray icon that there are unread messages
2013-12-24 21:31:49 -08:00
Jonathan Warren
99738e88aa Merge pull request #574 from yurivict/compatibility_FreeBSD
FreeBSD compatibility
2013-12-15 21:58:45 -08:00
Jonathan Warren
a9bd322155 Merge pull request #571 from hanswolff/patch-1
fixed typos
2013-12-15 21:37:25 -08:00
Jonathan Warren
98ce6340e8 updated all translation .ts files 2013-12-16 00:32:46 -05:00
Jonathan Warren
a41a5b3390 added class_objectProcessor.py to the translation .pro files 2013-12-16 00:19:15 -05:00
Jonathan Warren
1a489691be added Norwegian translation to UI 2013-12-16 00:15:07 -05:00
Jonathan Warren
eea51f878f Merge pull request #562 from flaskevann/patch-2
Create bitmessage_no.pro
2013-12-15 20:45:41 -08:00
Jonathan Warren
2bc502e3a2 Merge pull request #561 from flaskevann/patch-1
Create bitmessage_no.ts
2013-12-15 20:45:31 -08:00
Jonathan Warren
2fc85d8b32 Merge pull request #560 from erwinvaneyk/patch-1
fix #558
2013-12-15 20:43:06 -08:00
Jeroen Van Goey
90b0d4c640 remove duplicate code
There was twice a check for the Python version on OSX, but the logging in the second check was never reached
2013-12-09 00:32:19 +01:00
Jeroen Van Goey
fb98cd0fc8 remove duplicate code
There was twice a check for the Python version on OSX but the logging in the second step could never be reached.
2013-12-09 00:25:07 +01:00
Jonathan Warren
80932bbab0 fix pubkey signature bug leftover from objectProcessorThread-related-changes 2013-12-06 01:52:19 -05:00
Jonathan Warren
df7116bd72 on close, save objectProcessorQueue to disk 2013-12-02 01:35:34 -05:00
bikash617
6d197e97b1 populate from field feature implementation 2013-12-01 13:23:34 +04:00
Jonathan Warren
3c79b7bf65 save the tag in the inventory for your own broadcasts also 2013-12-01 00:45:37 -05:00
Jonathan Warren
44618ffcc2 added option to show recent broadcasts when subscribing 2013-11-30 23:15:18 -05:00
Dmitry Belyaev
f1ce821910 fix AppdataFolder encoding on windows 2013-11-30 00:42:15 +04:00
Yuri
346582dcb5 Fixed grammar: 'Waiting on' -> 'Waiting for' 2013-11-28 17:52:05 -08:00
Yuri
ce1c9ca26a Fixed grammar: 'Waiting on' -> 'Waiting for' 2013-11-28 17:51:07 -08:00
Yuri
42faf2aaa0 [NEW FEATURE] Implemented the indicator in tray icon that there are unread messages. 2013-11-28 17:05:53 -08:00
Yuri
7b65da70dc FreeBSD compatibility. 2013-11-28 16:20:16 -08:00
Hans Wolff
01620ec868 fixed typos
"Verschlüsselungscode Anforderung" -> "Verschlüsselungscode-Anforderung"
"Kennowrtsatz" -> "Kennwortsatz"
2013-11-25 19:00:39 +00:00
Jonathan Warren
45a0046e7d completed work on objectProcessorThread 2013-11-20 01:29:37 -05:00
flaskevann
a1e67da794 Create bitmessage_no.pro
A simple .pro file like the other languages have, with correct name for the norwegian translation file.

(I guess the .qm file also is needed, but I could not make heads or tails of it)
2013-11-17 08:07:41 +01:00
flaskevann
380a8e717e Create bitmessage_no.ts
Norwegian translation for Bitmessage.
Everything is translated, including the "unfinished" and "obsolete" parts (better safe then sorry).
(I used the french files as template)
2013-11-16 05:01:02 +01:00
Erwin van Eyk
be6b3961b7 fix #558 2013-11-15 16:29:11 +01:00
Jonathan Warren
b3ba1aed68 some initial objectProcessorThread work 2013-11-13 22:45:10 -05:00
Jonathan Warren
2a1b6dd86d some initial objectProcessorThread work 2013-11-13 22:44:42 -05:00
Jonathan Warren
90fd189fa8 minor style changes to previous commit 2013-11-07 16:44:08 -05:00
neko259
7a2115b889 Refactoring main qt module. Moved popup menus initialization to separate methods, simplified inbox loading and moved magic strings to the model scope constants so they won't be created every time. 2013-11-07 21:35:11 +02:00
Jonathan Warren
47e533f93c Merge pull request #547 from neko259/master
Refactored some table items to remove the universal unreadable variable ...
2013-11-07 11:08:48 -08:00
Jonathan Warren
d150193f43 Fix #545 2013-11-06 23:51:42 -05:00
Jonathan Warren
74c7c99511 Fix #544 2013-11-06 23:41:37 -05:00
Jonathan Warren
d34114d14c Fix #541 2013-11-06 23:38:19 -05:00
Jonathan Warren
7a7385496e Fix #472 2013-11-06 23:03:36 -05:00
Jonathan Warren
b3f0fd981f delete class_sqlThread.py.orig 2013-11-05 23:42:16 -05:00
Jonathan Warren
c490f63170 further work on 'messages expire' feature 2013-11-05 23:22:51 -05:00
neko259
c0f9531665 Refactored some table items to remove the universal unreadable variable 'new_item' 2013-11-05 23:36:15 +02:00
Jonathan Warren
bd2803bebc various changes to 'messages expire' pull request 2013-11-04 02:05:07 -05:00
Jonathan Warren
e5fce78fc3 revert settings window as close as possible to previous size 2013-11-02 18:05:39 -04:00
Jonathan Warren
3b41eafa7b revert main window to previous size 2013-11-02 18:01:36 -04:00
Jonathan Warren
389be42668 Merge branch 'master' of github.com:Atheros1/PyBitmessage 2013-11-02 17:36:01 -04:00
Jonathan Warren
162114ab28 load Sent To label from subscriptions if available 2013-11-02 17:34:46 -04:00
Jonathan Warren
f4fd5fd5bd Improve verbage in UI 2013-11-02 00:19:54 -04:00
Jonathan Warren
a4b5ded803 we no longer need to add chans to our address book 2013-11-02 00:02:46 -04:00
Jonathan Warren
6abb589f01 Merge branch 'master' of github.com:Atheros1/PyBitmessage 2013-11-01 20:56:50 -04:00
Jonathan Warren
a9898feab8 removed images/can-icon-24px_2.png 2013-11-01 19:28:44 -04:00
Jonathan Warren
f7ef2b4e05 various changes to Identicon code 2013-11-01 19:25:24 -04:00
Jonathan Warren
753155aa86 Merge branch 'feature/Identicons' of git://github.com/sendiulo/PyBitmessage into sendiulo-feature/Identicons 2013-10-30 15:56:22 -04:00
Jonathan Warren
41c3b73343 comment 2013-10-26 18:49:22 -04:00
Jonathan Warren
9dd674a117 Merge pull request #535 from Atheros1/master
API commands: createChan, joinChan, leaveChan, deleteAddress
2013-10-25 16:59:24 -07:00
Jonathan Warren
4ec91b6ed0 modified addresses.decodeAddress so that API decodeAddress works properly 2013-10-25 19:57:06 -04:00
Jonathan Warren
12edee4ac4 added API commands: createChan, joinChan, leaveChan, deleteAddress 2013-10-25 19:35:59 -04:00
Jonathan Warren
19eb77fb4f Merge branch 'master' of git://github.com/Eylrid/PyBitmessage into Eylrid-master 2013-10-25 17:46:33 -04:00
Jonathan Warren
240df6f5bb Merge pull request #534 from Atheros1/master
More informative "message truncated" text
2013-10-25 14:45:22 -07:00
Jonathan Warren
3649010b34 resolve merge conflict 2013-10-25 17:42:47 -04:00
Peter
f6cdc0844b Merge remote-tracking branch 'upstream/master' 2013-10-20 16:41:53 +04:00
Jonathan Warren
1cf7d36d81 Merge pull request #532 from Atheros1/master
Don't store inbox & sent message data in memory
2013-10-19 15:42:00 -07:00
Jonathan Warren
7a30db75f1 Use SQL-stored message when using 'Display as HTML' feature 2013-10-16 01:08:22 -04:00
Jonathan Warren
24452cddb2 check return value of RAND_bytes 2013-10-13 14:08:12 -04:00
Jonathan Warren
55568fa242 Don't store messages in UI table (and thus in memory), pull from SQL inventory as needed 2013-10-13 13:45:30 -04:00
Peter
32ce94e34f Merge remote-tracking branch 'upstream/master' 2013-10-13 13:05:00 +04:00
Joshua Noble
ed0a57d998 Fixed typo in getInboxMessagesByAddress 2013-10-12 00:33:19 -04:00
Peter
21c012b8d6 Merge remote-tracking branch 'upstream/master' 2013-10-10 17:13:43 +04:00
ikarakatsanis
9066dad5e3 AQWA feature: UI setting for Bitmessage to stop trying to send messages after X hours/days/months 2013-10-10 09:10:46 +04:00
John Kozan
6787e4b932 == should be = 2013-10-06 22:04:09 -06:00
ikarakatsanis
44bd876a40 feature1_v4 2013-10-06 12:32:14 +04:00
Jonathan Warren
5ca93907f1 Merge pull request #522 from Atheros1/master
Bug fixes
2013-10-05 10:43:22 -07:00
Jonathan Warren
a20711c2ab Fix whitelist functionality 2013-10-05 13:39:53 -04:00
Jonathan Warren
f6b9c234f7 pull translations properly when running from Windows EXE 2013-10-05 12:23:34 -04:00
Peter
5fb08efe00 merged 2013-10-03 19:39:27 +04:00
ikarakatsanis
c16d9787d2 feature1_v3_AQWA 2013-10-03 18:29:50 +04:00
Jonathan Warren
691ee5d3a7 Merge pull request #521 from Atheros1/master
Fix DevTalk discussion issue: sent message has wrong status (doesn't / d...
2013-10-01 19:47:54 -07:00
Jonathan Warren
ff8a88422c Fix DevTalk discussion issue: sent message has wrong status (doesn't / does expect ack) 2013-10-01 22:44:00 -04:00
ikarakatsanis
511185055d feature_v2 2013-10-02 04:16:42 +04:00
ikarakatsanis
d487b522cf feature_v1 2013-10-02 04:14:53 +04:00
Jonathan Warren
4d578c2b63 Merge pull request #516 from fuzzgun/master
Changelog update for 0.4.0
2013-09-29 23:12:42 -07:00
Jonathan Warren
235e257e81 Merge pull request #515 from grant-olson/translations_in_dmg
Translations in dmg
2013-09-29 22:27:44 -07:00
Jonathan Warren
8d5fad8e1f Merge pull request #498 from niklasf/master
Fix German translation of max difficulty tab
2013-09-29 22:27:04 -07:00
Jonathan Warren
f5b92b2fa5 turn timing attack mitigation back on 2013-09-29 23:06:24 -04:00
Jonathan Warren
9e34caebef increment version number to 0.4.1 2013-09-29 23:05:06 -04:00
Jonathan Warren
79dc462b1e Chan fix: completed 2013-09-29 23:01:56 -04:00
Jonathan Warren
498928405b Chan fix: initial work completed 2013-09-29 19:24:27 -04:00
fuzzgun
b37e0ec027 Changelog update for 0.4.0 2013-09-28 13:09:15 +01:00
ikarakatsanis
e1fc820226 changes in keys.dat, edit hours/days/months is working now, variable time_period inserted 2013-09-28 04:47:16 +04:00
Grant T. Olson
497c297020 Include translation resources 2013-09-27 10:28:40 -04:00
ikarakatsanis
ae01c186f4 minor change UI 2013-09-27 02:24:48 +04:00
ikarakatsanis
234081cc17 New tab "Adjusting time period for resending messages" was added 2013-09-27 02:14:24 +04:00
ikarakatsanis
2293253d38 test to check git usage 2013-09-26 16:21:11 +04:00
amos
379d27b5d8 update address versions in addChan 2013-09-23 23:00:50 -07:00
amos
000fe293d6 Merge branch 'decodeAddress2'
Conflicts:
	src/bitmessagemain.py
2013-09-23 22:39:40 -07:00
amos
e878fb4c96 Add api method decodeAddress
Add decodeAddress as an api call. Like the addresses.decodeAddress function
it return status, addressVersion, streamNumber, and ripe. ripe is base64
encoded.
2013-09-23 22:37:50 -07:00
Jonathan Warren
7e07d7bc7e _verifyAddress support v4 addresses 2013-09-24 00:55:13 -04:00
amos
8a3028e7c1 Merge branch 'fixApi' 2013-09-23 21:26:30 -07:00
amos
cdf4d5d75c Change the accepted address versions
Update _verifyAddress to accept version 4.
2013-09-23 21:19:02 -07:00
amos
250f36b670 Merge branch 'master' of https://github.com/Bitmessage/PyBitmessage 2013-09-23 20:00:22 -07:00
Jonathan Warren
4fea165d50 Increment version number to v0.4.0 2013-09-22 23:29:30 -04:00
Jonathan Warren
6081863b28 raise default demanded difficulty from 1 to 2 2013-09-22 23:12:21 -04:00
Jonathan Warren
ef500501d7 small fixes to address generator and listAddresses2 2013-09-21 13:30:46 -04:00
sendiulo
21005fb0a8 - add the settings also for old users 2013-09-21 17:06:54 +02:00
sendiulo
aed489a2bc Merge branch 'upstream/master'
Conflicts:
	src/bitmessageqt/__init__.py
	src/bitmessageqt/bitmessageui.py
	src/bitmessageqt/settings.py
	src/bitmessageqt/settings.ui
	src/helper_startup.py
2013-09-21 16:24:14 +02:00
sendiulo
cd2c55dd2d removed bug: sent icon wrongly put into column 0 instead of 1 2013-09-21 14:49:30 +02:00
sendiulo
d6bd2b3938 - GUI settings done 2013-09-21 14:31:47 +02:00
sendiulo
a58164d831 - additional identicon type "empty" if you want to have a placeholder
- place image named 'default.*' to display a generic user icon as fallback
- place image named '[Broadcast Subscribers].*' to set the icon for broadcasts
2013-09-21 13:21:36 +02:00
sendiulo
9a1226ba37 - "set avatar" via context menu
- remove avatar by canceling "set avatar"
- get FROM address labels also from YourIdentities
2013-09-21 09:41:23 +02:00
sendiulo
c1cbdc1b99 load avatar from file 2013-09-20 14:30:53 +02:00
Jonathan Warren
a147c38ab6 ignore eighteenByteRipe value if user specified numberofnullbytesonaddress in keys.dat file 2013-09-19 22:27:01 -04:00
sendiulo
31affd438f avatarize 2013-09-19 21:28:22 +02:00
sendiulo
86485a9b09 nonfunctional identicon settings-GUI 2013-09-18 17:39:45 +02:00
Jonathan Warren
02ea2a50d3 more v4 address work. Should be done. 2013-09-18 00:04:01 -04:00
sendiulo
0959c9c07c ... 2013-09-17 10:55:26 +02:00
sendiulo
240e9b5b58 Updated to work with QPixmap instead of PIL!
The original source is licensed under a BSD-License, so it should be fine to use.
2013-09-16 21:08:55 +02:00
Jonathan Warren
79f6169803 further v4 address work 2013-09-14 21:06:26 -04:00
Jonathan Warren
56168e82b5 most initial work on v4 pubkeys completed 2013-09-13 00:27:34 -04:00
Amos Bairn
40033d9e87 add api method addChan
This solves issue #484
2013-09-11 23:04:16 -07:00
Niklas Fiekas
c1a7356e1a Fix German translation of max difficulty tab 2013-09-11 22:20:07 +02:00
Gergö Barany
4765705764 More informative "message truncated" text that tells users what to do to
view the full message.
2013-09-11 12:18:13 +02:00
Jonathan Warren
33ea666df7 Merge pull request #494 from Atheros1/master
Smarter advertisement of object hashes and peers
2013-09-09 17:29:20 -07:00
Jonathan Warren
90e60d8145 delay addr messages random number of seconds 2013-09-09 19:26:32 -04:00
Jonathan Warren
f8454de37a Merge pull request #491 from grant-olson/check_readstatus_before_update
Only UPDATE readStatus if it changed
2013-09-07 15:27:34 -07:00
Jonathan Warren
f0bf3aad48 use locks when accessing dictionary inventory 2013-09-07 18:23:20 -04:00
Grant T. Olson
34203d73dd Only UPDATE readStatus if it changed 2013-09-07 13:35:10 -04:00
bitnukl
5d64919e1f resized main window to fit translations without scrolling
Now all translations fit in wothout scrolling (tested de, eo, fr and ru)
2013-09-07 10:54:26 +00:00
bitnukl
8042763956 translation updated 2013-09-07 10:46:23 +00:00
Jonathan Warren
831edf0d24 completed inv refactorization 2013-09-06 21:47:54 -04:00
Jonathan Warren
2725281a6d initial testing inv refactorization 2013-09-06 18:58:56 -04:00
Jonathan Warren
a9b15f83ba initial testing inv refactorization 2013-09-06 18:55:12 -04:00
Jonathan Warren
477568f501 changed API commands which modify and list the address book per discussion in #482 2013-09-06 15:06:29 -04:00
Jonathan Warren
0058433b96 Merge pull request #488 from Atheros1/master
fixed #486
2013-09-06 10:42:34 -07:00
Jonathan Warren
7181da5dd6 fixed #486 2013-09-06 13:41:24 -04:00
Jonathan Warren
08024748b0 Merge pull request #482 from grant-olson/add_delete_addressbook
addAddressBook and deleteAddressBook API calls
2013-09-05 11:06:06 -07:00
Grant T. Olson
bfd79e0ae1 Use same argument order as addSubscription for addAddressBook 2013-09-05 06:42:12 -04:00
Grant T. Olson
db81f0c11e Add add/deleteAddressBook APIs, extract address verification into reuable code, and make some QT stuff re-renderable 2013-09-05 06:31:52 -04:00
Jonathan Warren
c8b727e82b Merge pull request #480 from grant-olson/chan_in_listAddress
Add chan true/false to listAddresses results
2013-09-04 17:20:49 -07:00
Jonathan Warren
4f9dc9d720 Merge pull request #481 from Atheros1/master
Various improvements
2013-09-04 17:19:00 -07:00
Jonathan Warren
c06bbc14f8 Give user feedback when disk is full 2013-09-04 20:14:25 -04:00
Grant T. Olson
48a3bdfefc Add chan true/false to listAddresses results 2013-09-04 19:25:44 -04:00
Jonathan Warren
9283ce8776 When replying using chan address, send to whole chan not just sender 2013-09-04 17:33:39 -04:00
Jonathan Warren
2fcc6916c6 Merge pull request #479 from Atheros1/master
modifications to API commands used by mobile device
2013-09-04 13:55:18 -07:00
Jonathan Warren
1bbb8240ed modifications to API commands used by mobile device 2013-09-04 16:51:19 -04:00
Jonathan Warren
99ef546a0a Merge pull request #477 from fanquake/build_osx-version
Correct version number in build_osx.py
2013-09-04 09:59:50 -07:00
Jonathan Warren
7ccdd14418 fix #474 2013-09-04 12:53:18 -04:00
sendiulo
a9fb87173f now it should also work with the other identicon file 2013-09-04 13:45:23 +02:00
Michael Ford
36af1b528d Correct version number in build_osx.py 2013-09-04 19:31:50 +08:00
Jonathan Warren
eff4edb8e8 Merge pull request #471 from Eylrid/master
Restore "import shared" to helper_inbox
2013-09-03 22:10:00 -07:00
Jonathan Warren
5fab298559 Refactor of the way PyBitmessage looks for interesting new objects in huge inv messages from peers 2013-09-03 22:45:45 -04:00
Jonathan Warren
6159d5e622 Show inventory lookup rate on Network Status tab 2013-09-03 18:08:29 -04:00
Amos Bairn
f9d2a39c3d Restore "import shared" to helper_inbox
Commit 5b23d9 removed the line "import shared" from helper_inbox. Almost
all of what shared was used for became covered by helper_sql. But, shared
still needs to be imported because there is still one line that uses
shared:
9:    shared.UISignalQueue.put(('removeInboxRowByMsgid',msgid))
2013-09-03 12:56:07 -07:00
Jonathan Warren
3ca4578f7f minor changes to previous commit- adding listAddressBook to API 2013-09-03 00:30:48 -04:00
Jonathan Warren
cf52d93a67 Merge branch 'master' of git://github.com/Eylrid/PyBitmessage into Eylrid-master 2013-09-03 00:26:43 -04:00
Jonathan Warren
e214f0bb66 Added ability to set a message's read status using getInboxMessageID. This rather than #368 2013-09-03 00:20:30 -04:00
Jonathan Warren
f64461feb0 fixes to new SQL refactoring 2013-09-02 23:14:43 -04:00
Jonathan Warren
ea3cf9e00e minor changes to previous commit 2013-09-02 18:24:22 -04:00
Jonathan Warren
95c1dbda5a Merge branch 'sql_refactor' of git://github.com/grant-olson/PyBitmessage into grant-olson-sql_refactor 2013-09-02 17:30:06 -04:00
Jonathan Warren
9774cd2a5c fix #464 2013-09-02 16:51:32 -04:00
Grant T. Olson
8d8e43b1fc Added SqlBulkExecute class so we can update inventory without a million commits 2013-08-31 10:40:11 -04:00
Grant T. Olson
b83781cefb Merge remote-tracking branch 'upstream/master' into sql_refactor 2013-08-30 17:59:35 -04:00
Jonathan Warren
95cf453de4 resolve merge conflict 2013-08-30 13:26:55 -04:00
sendiulo
9b28e1932d quoted out the BSD licensed code (as i didn't get it to work properly yet) 2013-08-30 09:02:49 +02:00
Grant T. Olson
5eba4e6442 Merge branch 'master' into Fast_PoW_unless_frozen 2013-08-29 11:42:10 -04:00
Grant T. Olson
2165157c6e Fixed regression in adding to address book 2013-08-29 11:16:59 -04:00
Grant T. Olson
8a6d1d9cd5 Fix regression where I couldn't add a subscription 2013-08-29 10:02:42 -04:00
Grant T. Olson
03ce8ba8fb new API method needs to use helper_sql 2013-08-29 08:47:27 -04:00
Grant T. Olson
b5873187bf Merge branch 'master' into sql_refactor 2013-08-29 08:45:45 -04:00
Grant T. Olson
7499de4e13 have shared.py use helper_sql and move the sql queues and locks to helper_sql 2013-08-29 08:03:45 -04:00
Grant T. Olson
92c1368691 use helper_sql in class_receiveDataThread 2013-08-29 08:03:05 -04:00
Grant T. Olson
1fb11495a6 use helper_sql in class_singleWorker 2013-08-29 07:28:11 -04:00
Grant T. Olson
d879e35e26 use helper_sql for helper_sent 2013-08-29 07:27:09 -04:00
Jonathan Warren
da50d0c0d3 Merge pull request #453 from acejam/master
Added trashSentMessageByAckData API command
2013-08-28 19:10:14 -07:00
sendiulo
07b67051c9 Identicons now in new messages and in the From combobox.
[Broadcast Subscribers] gets the Bitmessage Icon for identification. This is hard-coded now, I would favour to put [Broadcast Subscribers] as a fixed item into the Address Book, so you can set an avatar as soon as i implement avatars.

Still no options yet: There will be an option to disable Identicons and Avatars separately. Another option will be for the suffix (to mimic adresses like "BM-...@bitmessage.ch" or to add a personal "salt" to prevent identicon attacks where someone creates an address with an identicon that looks alike the one of a known address). Also, identicon size (coupled with row height) should be available, but is of low priority.

Next step (after the settings) is to load specific avatars for each address.
2013-08-28 16:50:46 +02:00
Grant T. Olson
8b750be136 Merge branch 'master' into sql_refactor 2013-08-28 10:44:39 -04:00
akh81
6b9914fe46 updated Russian translations 2013-08-28 04:50:52 -05:00
akh81
e8cd025b18 updated Russian translations 2013-08-28 04:45:35 -05:00
Jonathan Warren
ef43248752 Merge pull request #438 from rspeed/master
Fix OS X package building
2013-08-27 19:48:18 -07:00
Jonathan Warren
83ffab9e4a manually merge #431 2013-08-27 22:38:32 -04:00
Jonathan Warren
0d5f2680d4 various modifications to previous commit regarding ability to select language 2013-08-27 22:29:39 -04:00
Jonathan Warren
aea1d41bf8 Merge branch 'master' of git://github.com/sendiulo/PyBitmessage into sendiulo-master 2013-08-27 21:11:40 -04:00
Jonathan Warren
07a679bdd1 Merge pull request #421 from tvwerkhoven/master
Use 'inf' as large value instead of 1e20
2013-08-27 18:06:33 -07:00
Jonathan Warren
4d2ab28b8d Merge pull request #411 from UnderSampled/master
Simple Inbox and Sent Preview box enhancements
2013-08-27 18:05:06 -07:00
Grant T. Olson
9e8cbd0f0e class_singleCleaner uses helper_sql 2013-08-27 10:00:26 -04:00
Grant T. Olson
5b23d99907 Have helper_inbox use helper_sql 2013-08-27 10:00:26 -04:00
Grant T. Olson
7a53d2950b Have bitmessageqt use sql helpers 2013-08-27 09:55:37 -04:00
Grant T. Olson
74cd6c24b2 Have API calls use sql helper 2013-08-27 09:55:37 -04:00
Grant T. Olson
edf9101eae Move duplicated sql code into helper 2013-08-27 09:55:36 -04:00
sendiulo
6c20d83edc Merge branch 'upstream/master'
Conflicts:
	src/helper_startup.py
2013-08-27 12:10:46 +02:00
sendiulo
deeac2c99b Identicons working in most lists, but not working for new items yet.
There are no settings yet.
2013-08-27 11:47:14 +02:00
Joshua Noble
b5f42d7549 Added trashSentMessageByAckData API command 2013-08-26 22:29:57 -04:00
Jonathan Warren
0ca9ba9dc1 Merge branch 'master' of github.com:Atheros1/PyBitmessage 2013-08-26 15:27:51 -04:00
Jonathan Warren
1bb86794a8 undid support for receiving v4 addresses until more chanages are implemented 2013-08-26 15:23:12 -04:00
Grant T. Olson
732d7c999a Allow specification of alternate settings dir via BITMESSAGE_HOME 2013-08-26 08:44:15 -04:00
Jonathan Warren
3ae8dd8eee log traceback on API exception 2013-08-26 00:06:49 -04:00
Jonathan Warren
7ad8ce7e1b Merge pull request #446 from Atheros1/master
Convert 'API Error' to raise APIError()
2013-08-25 20:52:52 -07:00
Jonathan Warren
14a968b499 github demanded a manual merge 2013-08-25 22:52:38 -04:00
Jonathan Warren
0d69ebb125 Merge branch 'raise_api_error' of git://github.com/grant-olson/PyBitmessage into grant-olson-raise_api_error 2013-08-25 22:38:51 -04:00
Jonathan Warren
3c90728e69 Merge pull request #442 from Atheros1/master
manually undid much of pull #287. Discussion in #398
2013-08-25 16:36:16 -07:00
Jonathan Warren
4396bc7f97 manually undid much of pull #287. Discussion in #398 2013-08-25 19:31:54 -04:00
Jonathan Warren
84465c4e8e Merge pull request #394 from DivineOmega/class_sqlThread_logger
class_sqlThread.py - changing prints to loggers
2013-08-25 16:07:45 -07:00
Jonathan Warren
1b5158d658 refactored helper_startup.py so that it can make use of a pre-set shared.appdata variable 2013-08-25 18:55:53 -04:00
Jonathan Warren
ea54f8e779 resolve merge conflict 2013-08-25 16:23:28 -04:00
Jonathan Warren
2614975163 Merge branch 'master' of github.com:Bitmessage/PyBitmessage 2013-08-25 16:03:24 -04:00
Jonathan Warren
7146823b10 Merge branch 'daemon_spelling_error' of git://github.com/DivineOmega/PyBitmessage into DivineOmega-daemon_spelling_error 2013-08-25 16:02:02 -04:00
Jonathan Warren
0c2ce666c2 Merge pull request #440 from Atheros1/master
Swap print statements for logging statements
2013-08-25 12:59:32 -07:00
Jonathan Warren
4c920fd153 resolve merge conflict 2013-08-25 15:56:20 -04:00
Jonathan Warren
83f3d81251 Merge pull request #439 from Atheros1/master
Small package modifications
2013-08-25 11:11:18 -07:00
Rob Speed
f0557e3987 Added Sip and PyQt to includes
This should make it possible to distribute a DMG file.
2013-08-25 04:36:43 -04:00
Jonathan Warren
82db79ca39 removed option from previous commit which allowed user-settable maximum network message size pending further discussion 2013-08-24 20:23:49 -04:00
Jonathan Warren
a5c65f11e8 resolve merge conflict 2013-08-24 20:18:46 -04:00
Jonathan Warren
9a4d7a7801 Merge pull request #435 from Atheros1/master
show number of each message type processed in the API command clientStat...
2013-08-24 16:48:57 -07:00
Jonathan Warren
0132db33dc show number of each message type processed in the API command clientStatus 2013-08-24 19:40:48 -04:00
sendiulo
a36c696f9d Now the userlocale can be set manually in the keys.dat without being overwritten (e.g. for importing language files that aren't already in the main code). 2013-08-24 09:21:59 +02:00
sendiulo
da93d1d8b4 Combobox for language selection.
Unfortunately, I didn't manage to automatically provide all the languages that are available as *.qm files. By now we have to manually set the combobox items and the list for the languages in the bitmessageqt/__init__.py
2013-08-24 09:07:46 +02:00
Grant T. Olson
bd489408c7 Actually OSX app maded with py2app can parallelize just fine 2013-08-23 16:10:57 -04:00
Grant T. Olson
a20213f1e8 Use fast PoW unless we're explicitly a frozen (binary) version of the code 2013-08-23 13:24:38 -04:00
Amos Bairn
a290b61f1a Add listAddressbook to api
listAddressbook returns label and address for each address in the
addressbook.
2013-08-22 07:35:48 -07:00
sendiulo
383cc59991 Merge branch 'upstream/master'
Conflicts:
	src/bitmessageqt/__init__.py
	src/translations/bitmessage_en_pirate.pro
	src/translations/bitmessage_fr.pro
	src/translations/bitmessage_fr_BE.pro
	src/translations/bitmessage_ru.pro
2013-08-22 11:39:24 +02:00
sendiulo
9059a5189f test commit 2 2013-08-21 17:04:43 +02:00
sendiulo
80744f0e03 test commit 2013-08-21 16:59:21 +02:00
sendiulo
6f3684ec1f Translation cleanup. Added Esperanto (partial) and Pirate (by Dokument). 2013-08-21 16:50:17 +02:00
sendiulo
aefedd4991 Added Esperanto (partial) and Pirate (by Dokument).
Cleanup of the translation files. All the *.pro files are now similar and the *.ts files are updated and ready for further translation. Newly released the *.qm files.

There's still an error when trying to change back from "ru" or "ru_RU" to any other language. However, this doesn't happen in other languages.

This is set to work with the gracefull degrade (e.g. 'de_CH' to 'de' if there is no such file).

There's no warning about the need to restart. I think it is obvious, so i don't think we need it, but i can add it if you want.
2013-08-21 16:17:09 +02:00
sendiulo
a6b946f5be Enable user-set loclization. There is a checkbox in the settings to switch this on and off. The text field in the settings can be filled with the appropriate language code.
I've set it to degrade to language codes in both the user-set locale and the imported default locale, e.g. if there is no 'en_US' then use 'en' (like grant olsons commit).
2013-08-21 16:08:22 +02:00
Grant T. Olson
8895676317 Fallback to language only localization 2013-08-20 08:41:28 -04:00
Tim van Werkhoven
16ff6e883a Use 'inf' as large value instead of 1e20
'inf' is always bigger than any number, 1e20 is not.
2013-08-20 10:43:30 +02:00