d8301ff512
Less verbose connection error reporting
...
- don't print tracebacks on normal (timeout/reset) errors
2017-02-26 20:29:07 +01:00
cff1af1b4f
Subscription wrong tab
...
- when subscribing from addressbook, it switched to blacklist tab
instead of subscriptions
2017-02-26 20:03:47 +01:00
88658b074e
Socks proxy hostname resolving error handling
...
- if resolving fails, it wasn't handled
2017-02-26 20:03:14 +01:00
7ebe837eb0
Make some network parameters configurable
...
- maxtotalconnections = maximum number of total full connections
(incoming + outgoing) the node will allow. Default 200 as it was.
- maxbootstrapconnections = number of additional (to total) connection
that will act in bootstrap mode, closing after sending the list of
addresses. Default 20 as it was.
- maxaddrperstreamsend = initial address list maximum size, per
participating stream. Default 500. Child streams get half. The
response is chunked into pieces of max. 1000 addresses as that's the
protocol limit.
2017-02-26 17:46:02 +01:00
0fa0599cd4
IPv4 listen socket fix
...
- on OpenBSD, you can't have a socket that supports both IPv4 and IPv6.
This allows handling for this error, and then it will try IPv4 only,
just like for other similar errors.
2017-02-26 12:55:43 +01:00
191650f5a4
Typos
...
- previous commit contained typos
2017-02-26 12:52:28 +01:00
b1b0c46555
Improve exception handling
...
- there were reports of errors in FreeBSD (I could only reproduce some)
and Gentoo without IPv4 support (I don't have a VM for testing ready)
- adds an exception handler for double task_done in case sender thread
has to close prematurely (I saw this triggered on FreeBSD 11)
- listening socket opening error handler was broken (triggered if you
can't open a socket with both IPv4 and IPv6 support)
- error handler for socket.accept. Reported on FreeBSD 10.3
- fixes #854
2017-02-26 12:42:18 +01:00
74c85b4a9e
Retransmit timing changes
...
- makes it behave more like in the description
- partial for #847
2017-02-25 23:40:37 +01:00
7ef91bd607
Changed Makefile to use CXX instead of g++
...
- is more standardised
- closes #882
2017-02-25 22:33:31 +01:00
Justin Ramos
b50198afb5
changes needed to get current code to run
2017-02-25 00:06:04 -06:00
PyBitmessage Translations
93c881172e
Auto-updated language ja from transifex
2017-02-23 15:11:17 +01:00
PyBitmessage Translations
30952f91cf
Auto-updated language ru from transifex
2017-02-22 17:11:30 +01:00
a6dbb1e37e
Less timestamp penalty for inbound connections
...
- was over 2 days, but PyBM will only spread those with more recent than
3 hours. So it's now set to 2 hours
2017-02-22 16:18:08 +01:00
d7076626c2
TTL label is in red and warning when too low
...
- TTL to chans shouldn't be too low so the UI gives a feedback
- warning when sending wouldn either require a lot of refactoring or
wouldn't have good usability
2017-02-22 16:07:39 +01:00
e9899743ef
Typos, formatting, obsolete imports
2017-02-22 15:09:36 +01:00
PyBitmessage Translations
71ca2a761b
Auto-updated language pl from transifex
2017-02-22 12:53:17 +01:00
PyBitmessage Translations
fa1fc2a031
Auto-updated language eo from transifex
2017-02-22 12:36:09 +01:00
af1bed9034
MessageView Unicode HTML fix
...
- the HTML on/off click label should be unicode rather than str
2017-02-22 12:30:14 +01:00
57a3c35299
Context menu on messages to deleted accounts
...
- messages from deleted chans still stay in global inbox
- this crated problems with account detection
- created NoAccount class for such accounts
2017-02-22 12:15:52 +01:00
PyBitmessage Translations
72ed3e340f
Auto-updated language sk from transifex
2017-02-22 11:29:18 +01:00
PyBitmessage Translations
bda5b02118
Auto-updated language de from transifex
2017-02-22 11:27:17 +01:00
PyBitmessage Translations
56384a353a
Auto-updated language ja from transifex
2017-02-22 11:18:16 +01:00
6062277d60
Rename configparser.py to bmconfigparser.py
...
- it was causing problems with py2app because the source of python's own
CongigParser is also configparser.py
2017-02-22 09:34:54 +01:00
266d8eba1f
SafeHTMLParser unicode / subprocess
...
- don't do subprocess in SafeHTMLParser, it doesn't work in frozen mode
and an attempt to fix it would take too much refactoring and I'm not
even sure it would work
- instead, make it handle broken unicode correctly
- I think the previous reports of freezes were caused by trying to
interpret data as unicode, causing a crash
- it does about 1MB/s on my machine, so a timeout is not a big problem
2017-02-22 09:05:05 +01:00
Justin Ramos
fd95f8f519
allowing for max outbound connection configuration
...
Signed-off-by: Justin Ramos <justin.ramos@gmail.com>
2017-02-21 16:28:54 -06:00
c8429365e3
Typo
...
- typo in last commit
2017-02-21 10:25:59 +01:00
fef6126a74
Error handling improvement in sendDataThread
...
- don't uncecessarily report EPIPE as a big error, just close the
connection
2017-02-21 09:58:28 +01:00
ea9f10a8bb
Simplify and fix list of addresses to send
...
- it didn't always send the maximum possible amount
- it probably was slow
2017-02-20 22:32:49 +01:00
579ba49f38
Deamon mode without PyQt4
...
- daemon mode shouldn't require PyQt4
2017-02-20 20:53:50 +01:00
9c4366ffa6
Don't report direct network errors as proxy errors
...
- last commit reported network errors that happened when proxy was off
as network errors
2017-02-20 12:34:55 +01:00
ea448c4496
SOCKS error handler winsock compatibility
...
- now it can detect WSA errors as well, allowing more accurate error
feedback
2017-02-20 12:15:51 +01:00
46a2c361de
Building and msgpack fixes
...
- Makefile typo
- pyinstaller rewritten and fixed including and initialisation of
messagetypes
- msgpack decoding new message display fix
2017-02-19 19:48:45 +01:00
67c8966a21
Windows compatibility fixes
...
- spec file for pyinstaller detects architecture (32 or 64bit)
- spec file uses os.path.join
- spec file creates and adds the list of messagetypes
- added MinGW/MSyS support in Makefile
- separate Makefile.msvc for MCVC
- bitmsghash.cpp minor adjustments to build also on MSVC/MinGW
- if frozen mode, messagetypes loads the list of files from a text file
generated during archive building rather than from a directory
2017-02-19 14:48:53 +01:00
a95f4aa255
LibreSSL compatibility
...
- code distinguishes between OpenSSL 1.1.x and LibreSSL and works with
both
2017-02-18 17:22:17 +01:00
75f715bfe4
BSD compatibility
...
- separate Makefile for BSD make
- auto-compile will detect BSD and pass the correct parameters to make
- C PoW builds on OpenBSD and detects number of cores
2017-02-18 17:20:09 +01:00
6c907e2046
Windows socket typo
2017-02-17 21:14:39 +01:00
f499a3b1d8
Typo
2017-02-14 13:57:20 +01:00
f94b2d2d4b
Windows compatibility fixes
...
- there is no errno.WSAEAGAIN, only errno.WSAEWOULDBLOCK
2017-02-14 01:38:58 +01:00
a4b1a781ce
Minor UI fixes
...
- "new" folder consistently appears in chans and "All accounts"
- "Sent" message list sorting fix
- When editing a label, keys.dat is saved and the lineEdit completer
is updated
- addressbook is updated when adding/deleting a new chan
2017-02-14 01:35:32 +01:00
965f3548ac
Depends checking updates
...
- checks for msgpack
- can distinguish OS and make a recommendation with respect to the
relevant package manager
2017-02-14 01:33:16 +01:00
d8ae44f9ee
Obsolete imports, missing exception type
2017-02-09 21:04:07 +01:00
c778b81427
knownNodes refactoring and shutdown fixes
...
- saveKnownNodes replaced the repeated pickle.dump
- with knownNodesLock instead of acquire/release
- outgoingSynSender had an unnecessary loop during shutdown causing
excessive CPU usage / GUI freezing
2017-02-09 11:53:33 +01:00
e664746f04
More knownNodes init
...
- also init children if they are missing
2017-02-08 20:52:18 +01:00
b0539f5cb4
SSL handshake fewer errors
...
- don't unnecessarily raise exceptions if SSL handshake fails
2017-02-08 20:49:14 +01:00
35a712d11d
KnownNodes missing init
...
- init knownnodes when connecting to a stream
2017-02-08 20:48:22 +01:00
157881bc63
Cyclic import fix
...
- networkDefaultProofOfWorkNonceTrialsPerByte and
networkDefaultPayloadLengthExtraBytes cyclic import fix
- PyBitmessage should launch now when there's no keys.dat
2017-02-08 20:37:42 +01:00
2cc4435cfc
Imports, typos, syntax errors
...
- remove obsolete imports
- add missing imports
- fix typos
- fix syntax errors
- thanks to landscape.io for report
2017-02-08 14:19:02 +01:00
59f3a2fbe7
Reduce cyclic dependencies
...
- rearranged code to reduce cyclic dependencies
- doCleanShutdown is separated in shutdown.py
- shared queues are separated in queues.py
- some default values were moved to defaults.py
- knownnodes partially moved to knownnodes.py
2017-02-08 13:41:56 +01:00
7da36eccbd
Signal sender threads to close on shutdown
...
- when shutdown is running, add a shutdown command to the queues of all
sender threads
2017-02-07 20:47:28 +01:00
a381f75b4b
Git head information in version
...
- About dialog now shows the git head
- git head check has been improved to point to the head rather than the
previous commit
2017-02-07 20:46:30 +01:00
2c72b337c1
Typos and formatting
2017-02-07 20:09:11 +01:00
07722fb606
Node negotiation error handling
...
- complete the version and SSL handshake first, and only then feed
errors into the stream and close connection
- this allows more accurate error handling on both sides
- also the timeOffset error trigger is now more accurate, but requires
more nodes to upgrade
2017-02-07 19:38:52 +01:00
8515f9a9fc
Set SSL socket to blocking
...
- otherwise the error handling gets too complicated
2017-02-07 16:42:02 +01:00
6b65dfeeec
MarkAllUnread sqlite argument limit
...
- shouldn't crash anymore if there are too many messages to mark read
2017-02-07 16:38:02 +01:00
413419c858
Timeout handling and ping
...
- timeouts after the connection is established will trigger a ping
- previously they were handled as unrecoverable errors
2017-02-07 16:06:24 +01:00
15c620dcc2
SSL socket blocking error handling
2017-02-07 13:00:24 +01:00
ddc0ca5ede
Retry for certain non-blocking operations
...
- sometimes on read, EWOULDBLOCK is returned. It should retry. A timeout
is handled separately
2017-02-06 19:41:25 +01:00
61770ba89a
Typo
2017-02-06 19:34:38 +01:00
f6bdad18a3
Improved stream handling
...
- version command sends list of all participating streams
- biginv sends lists of hosts for all streams the peer wants (plus
immediate children)
- objects will spread to all peers that advertise the associated stream
- please note these are just network subsystem adjustments, streams
aren't actually usable yet
2017-02-06 17:47:05 +01:00
79b566a907
Fix bitflags in version packet
2017-02-06 17:39:42 +01:00
e434825bb2
Pending download counter fix
...
- handles expired objects better
- counts objects that failed download more accurately
2017-02-06 11:02:03 +01:00
23fcf2cdec
SSL handshake python version compatibility
...
- error handling should now work with < 2.7.9
2017-02-03 10:05:35 +01:00
c979481564
Unhandled missing peer
2017-02-03 09:43:47 +01:00
ba130e03e5
Network subsystem freezing fixes
...
- queues were too short
- some error handling was missing
- remove nonblocking repeats in receive data thread
- singleCleaner shouldn't wait unnecessarily
2017-02-02 15:52:32 +01:00
4f70eaa01f
Fix curses mode
2017-02-02 15:48:56 +01:00
f3849eeb48
Unused imports, problematic variable names
2017-01-19 20:04:45 +01:00
01a9124b7d
Less verbose SSL handshake reporting
...
- if SSL handshake fails, we don't need to stack trace because we know
where it's happening. Only report the error string.
2017-01-19 19:52:54 +01:00
5828021903
Fix false error about wrong stream
...
- sendinv and sendaddress are sometimes being sent to connections that
haven't been established yet, resulting in complaints about stream
mismatch. The error should only be displayed once the connection has
been established and the remote node provides its stream number
2017-01-19 19:50:40 +01:00
5ae1327edc
Download/upload shutdown fixes
...
- Missing renamed to PendingDownload
- PendingDownload now only retries 3 times rather than 6 to dowload an
object
- Added PendingUpload, replacing invQueueSize
- PendingUpload has both the "len" method (number of objects not
uploaded) as well as "progress" method, which is a float from 0
(nothing done) to 1 (all uploaded) which considers not only objects
but also how many nodes they are uploaded to
- PendingUpload tracks when the object is successfully uploaded to the
remote node instead of just adding an arbitrary time after they have
been send the corresponding "inv"
- Network status tab's "Objects to be synced" shows the sum of
PendingUpload and PendingDownload sizes
2017-01-19 19:48:12 +01:00
5708a38be0
Fix sending messages crashing
2017-01-17 01:07:39 +01:00
9197c425d2
Object requesting fix
2017-01-17 00:32:05 +01:00
9ed59dd825
Shutdown procedure cleanup
2017-01-16 23:38:18 +01:00
ca8550a206
Don't send requests for 0 objects
2017-01-16 23:37:25 +01:00
749bb628c0
Typo
2017-01-16 23:37:03 +01:00
4f920fe641
Fix infinite loop
2017-01-16 23:17:56 +01:00
d652dc864d
Downloading fixes
...
- able to request more objects with one command
- fixes to logic and error handling
2017-01-16 19:36:58 +01:00
9f89df6d1c
Expire objects that we're unable to receive
...
- sometimes a node would send an "inv" about an object but then not
provide it when requested. This could be that it expired in the
meantime or it was an attack or a bug. This patch will forget that the
object exists if was requested too many times and not received.
2017-01-16 17:08:47 +01:00
ca6bc9981c
Better tracking in downloading objects
...
- remember what was requested from which node
- remember if it was received
- re-request object if we haven't received any new object for more than
a minute
2017-01-16 15:17:23 +01:00
8dfa0faca9
More objects to be downloaded fixes
2017-01-15 23:10:44 +01:00
12205ee7ba
More fixes in objects to be downloaded
2017-01-15 23:07:11 +01:00
bd1aead46e
More fixes for objects to be downloaded
2017-01-15 22:41:12 +01:00
d04c0e78e4
Better handling of pending downloading objects
2017-01-15 22:36:12 +01:00
b750e67bfb
Handle exception in iterator
2017-01-15 22:25:09 +01:00
805f72e098
Make objects to be send stoppable if not empty
2017-01-15 22:21:19 +01:00
94f0bdc731
Objects to be downloaded optimising
...
- treat requested but never arrived objects as expired. This is how it
worked before the refactoring. Without this, the list won't go to
zero.
2017-01-15 22:01:10 +01:00
79893fdc23
Performance tuning objects to be downloaded
...
- rely on dict quasi-random order instead of an additional shuffle
- request an object once per minute
- stop check after count objects have been found
2017-01-15 20:47:33 +01:00
dbe15d0b99
Objects to be downloaded fixes
...
- tries to avoid calling senddata it it would block receiveDataThread,
allowing fore more asynchronous operation
- request objects in chunks of 100 (CPU performance optimisation)
2017-01-15 19:50:28 +01:00
f079ff5b99
Refactor objects to be downloaded
...
- moved logic into a Missing singleton
- shouldn't try to download duplicates anymore, only requests a hash
once every 5 minutes and not from the same host
- removed obsoleted variables
- the "Objects to be synced" in the Network tab should now be correct
- removed some checks which aren't necessary anymore in my opinion
- fix missing self in Throttle (thanks landscape.io)
2017-01-15 19:21:24 +01:00
6d2a75bfc9
Transfer speed improvements
...
- send buffer to send multiple commands in one TCP packet
- recv/send operation size now based on bandwith limit
- send queue limited to 100 entries
- buffer getdata commands to fill send queue, instead of waiting for the
data packet to arrive first (i.e. allow getdata to work asynchronously)
2017-01-15 15:08:03 +01:00
c3fef7bc4e
Syntax fix
2017-01-15 12:41:19 +01:00
9bf17b34d1
Remove obsolete imports and code
...
- landscape.io pointed out obsolete imports
- there is also an obsolete variable and lock in throttle.py
- add Exception type to BMConfigParser().save
2017-01-15 11:40:31 +01:00
8cb0953401
Moved writeKeysFile into configparser
...
- shared.writeKeysFile -> BMConfigParser().save
- makes it easier to get rid of circular imports
2017-01-15 10:50:02 +01:00
5ca8a52662
Typos, extra imports and similar
...
- pointed out by landscape.io
- also updated dev/ssltest.py to work the same way as the main program
2017-01-15 10:48:29 +01:00
689d697a40
Refactor bandwidth limit and speed calculator
...
- also fixes potential deadlocks
2017-01-14 23:21:00 +01:00
ad75552b5c
Move shutdown from shared.py to state.py
2017-01-14 23:20:15 +01:00
bcc7692e14
Add safeGetInt to BMConfigParser
2017-01-14 23:18:06 +01:00
02a7c59de8
OpenSSL 1.1.0 compatibility fixes
...
- part 2, continued from previous commit
2017-01-14 17:50:49 +01:00
59b5ac3a61
OpenSSL 1.1.0 compatibility fixes
...
- function check missed 1.1.0 release
- TLS didn't work with anonymous ciphers
2017-01-14 17:47:57 +01:00
fa2f87743e
SSL handshake fix
...
- SSL handshake would often fail, because verack packet was being sent
at the same time as the do_handshake was executed in a different
thread. This makes it so that do_handshake waits until verack is done
sending.
- also minor modifications in SSLContext initialisation
2017-01-14 13:22:46 +01:00
cc4c07025b
Sending thread fix
2017-01-14 12:35:08 +01:00
8d278182a7
Indentation
2017-01-13 15:53:47 +01:00
93bdc3c800
Remove extra print
2017-01-13 12:32:26 +01:00
d0b1cbfe1f
Add current git HEAD info to support request
2017-01-13 12:29:14 +01:00
5ae676f2ad
Minor support fix
2017-01-13 12:05:39 +01:00
6778d6046f
Add OpenSSL 1.1.0 compatibility
...
- thanks to Wolfgang Frisch <wfr@roembden.net>
2017-01-13 12:02:34 +01:00
59cf33c9a1
Remove obsolete import
2017-01-13 12:01:38 +01:00
65701e5997
neededPubkeys fix
...
- was still using shared.neededPubkeys
2017-01-13 09:30:23 +01:00
ff8deebf60
Keep track of network protocol status
2017-01-12 19:18:56 +01:00
810e50a040
Fix minor issues
...
- landscape.io complained
- obsolete imports
- ciphers -> self.ciphers
2017-01-12 07:26:04 +01:00
2cf2188bc3
Object sending fix
...
- forgot to move broadcastToSendDataQueues in class_singleWorker.py
2017-01-12 07:22:34 +01:00
bd520a340f
Trustedpeer fix and more refactoring
...
- fixed trustedPeer (thanks to anonymous bug reporter)
- moved trustedPeer and Peer into state.py
2017-01-12 06:58:35 +01:00
e7470a4757
Remove leftover from debugging
2017-01-12 06:57:17 +01:00
5ceb920bd6
TLS tuning
...
- allow TLS > 1.0 with python >= 2.7.9
- tune ssl_context with python >= 2.7.9
2017-01-11 20:47:27 +01:00
c738d93056
Assorted fixes
...
- landscape.io was complaining, this fixes most easily fixable errors
2017-01-11 18:13:00 +01:00
cdcdf11d59
Missing import fix
2017-01-11 17:46:33 +01:00
fa0a3135e7
Fixes pointed out by landscape.io
...
- missing/wrong/obsolete imports
- logger formatting
2017-01-11 17:26:25 +01:00
ac348e4e6b
Fixes and refactoring
...
- fixes errors introduced in the earlier refactoring
- more variables moved to state.py
- path finding functions moved to paths.py
- remembers IPv6 network unreachable (in the future can be used to skip
IPv6 for a while)
2017-01-11 17:00:00 +01:00
5d2bebae28
Add IPv4 multicast range to ignored addresses
2017-01-11 14:46:10 +01:00
8bcfe80ad0
Refactoring of config parser and shared.py
...
- got rid of shared config parser and made it into a singleton
- refactored safeConfigGetBoolean as a method of the config singleton
- refactored safeConfigGet as a method of the config singleton
- moved softwareVersion from shared.py into version.py
- moved some global variables from shared.py into state.py
- moved some protocol-specific functions from shared.py into protocol.py
2017-01-11 14:27:19 +01:00
085e335969
Proxy update (for the new network subsystem)
2017-01-10 21:22:22 +01:00
75090abaaf
Advanced dispatcher class
...
- generic class the new asyncore-based network subsystem that handles
buffered data transfer
2017-01-10 21:20:49 +01:00
b4703ec6ce
Make objectHashHolder into a list
...
- was a dict
2017-01-10 21:19:57 +01:00
9c214b4a24
Inventory refactoring #2
...
- forgot to add api.py
2017-01-10 21:17:25 +01:00
e84b19613e
Inventory refactoring
...
- minor refactoring, made it into singleton instead of a shared global
variable. This makes it a little bit cleaner and moves the class into
a separate file
- removed duplicate inventory locking
- renamed singleton.py to singleinstance.py (this is the code that
ensures only one instance of PyBitmessage runs at the same time)
2017-01-10 21:15:35 +01:00
4f543e14c1
TLS handshake fix
...
- TLS handshake in python is apparently always asynchronous, so it needs
proper handling of SSLWantReadError and SSLWantWriteError
- also adds a timeout and a proper shutdown if handshake fails
2017-01-07 23:42:07 +01:00
PyBitmessage Translations
541979a159
Auto-updated language fr from transifex
2017-01-05 19:24:45 +01:00
PyBitmessage Translations
9a26ce5be1
Auto-updated language ja from transifex
2016-12-16 10:18:29 +01:00
PyBitmessage Translations
e92161650b
Auto-updated language pl from transifex
2016-12-15 19:57:09 +01:00
PyBitmessage Translations
a87bfb8a82
Auto-updated language eo from transifex
2016-12-15 19:53:55 +01:00
PyBitmessage Translations
77d7dcbd2d
Auto-updated language sk from transifex
2016-12-15 16:33:21 +01:00
PyBitmessage Translations
3b896e69e7
Auto-updated language de from transifex
2016-12-15 16:26:50 +01:00
fefb959338
Notify if C PoW missing
...
- Linux users often don't know that the C PoW is available and complain
it's slow. This will try to build it, and adds availability
notification in the status bar
- also, the updateStatusBar signal now allows emphasised notifications,
which will remain visible for a longer period of time and also
reappear if a status change happened in the meantime
2016-12-15 16:11:29 +01:00
PyBitmessage Translations
9d9052dda2
Auto-updated language zh_cn from transifex
2016-12-13 17:52:23 +01:00
PyBitmessage Translations
49832231ca
Auto-updated language de from transifex
2016-12-13 17:39:49 +01:00
025950c05e
Fix locale init
...
- date/time wasn't localised correctly on startup
2016-12-13 11:54:01 +01:00
PyBitmessage Translations
dd777d6e43
Auto-updated language de from transifex
2016-12-12 00:44:09 +01:00
PyBitmessage Translations
d8b8e0e9dd
Auto-updated language fr from transifex
2016-12-10 20:12:30 +01:00
114563ed2f
Default logger output UTF-8
...
- fixes errors when using locales other than EN
2016-12-06 16:15:37 +01:00
0dde976dec
Fix timeformat in configparser
...
- allow both raw (new) and non-raw (old) style timeformat for backwards
compatibility
2016-12-06 13:04:52 +01:00
df18f7b042
Switch configparser to raw mode
2016-12-06 11:01:17 +01:00
e647d70bbc
New config parser class
...
- workaround for % in labels
- can be extended in the future
2016-12-06 10:47:39 +01:00
PyBitmessage Translations
9f89191742
Auto-updated language ja from transifex
2016-12-05 12:09:41 +01:00
9509552663
New network backend (WIP, not integrated)
...
- current snapshot of the new network backend code
- not working yet, just base classes and no integration
2016-12-01 16:48:04 +01:00
7ca6576dfc
Connection indicator for hidden service
...
- the number of connections as well as connection indicator was broken
when running as a hidden service. This is a workaround
2016-11-16 19:36:50 +01:00
5cea1e04d1
SSL disconnect fix
...
- sometimes SSL connections unnecessarily disconnected on non-fatal
errors. This should fix that. This is however a short term solution
because of migrating to asyncore which has its own error handling
2016-11-16 15:18:09 +01:00
PyBitmessage Translations
1d3757ddc8
Auto-updated language pl from transifex
2016-11-15 22:07:40 +01:00
PyBitmessage Translations
3bafd597af
Auto-updated language eo from transifex
2016-11-15 21:36:16 +01:00
3f3774ff1f
Translation source update
...
- add extended encoding translation sources
2016-11-15 17:11:36 +01:00
7cc0f8fab0
Add extended encoding message validation
...
- validates variables of the "message" type
2016-11-15 17:10:33 +01:00
e76b10a6ed
Logging fix
2016-11-15 17:10:14 +01:00
bae7351849
Formating and standalone fix
...
- when running as a standalone program, helper_msgcoding logger import
was missing
2016-11-15 17:09:08 +01:00
c6d45dd394
Encoding when sending to self
...
- when sending to self, it always used encoding 2 when saving into the
inbox. Now uses the one that's currently selected
2016-11-15 17:07:53 +01:00
fbc9886eda
OpenCL settings saving fix
2016-11-15 17:06:56 +01:00
612333a267
Enable support for extended encoding
...
- receiving extended encoding now works
- sending works from the GUI by pressing "Shift" while clicking on
"Send"
- requires https://pypi.python.org/pypi/msgpack-python
2016-11-14 20:23:58 +01:00
966b4382d8
Add handler for unknown encoding
2016-11-14 20:22:10 +01:00
5a438ccddd
OpenCL initialisation fix
2016-11-14 20:21:46 +01:00
b9748c55aa
Don't connect to self fix
...
- the hidden service don't connect to yourself fix was broken, this
fixes the fix
2016-11-14 20:20:41 +01:00
54e3465575
HTML parser queue flush fix
...
- the queue wasn't correctly flushed
2016-11-14 20:19:26 +01:00
d35062b49c
Half-open connection limit warning fix
...
- it only should complain if on Windows and can't determine the Windows
version
2016-11-13 08:50:09 +01:00
2fc2c78299
Extended encoding update
...
- modified to support both encoding and decoding
- fixes
- added test for all encodings
2016-11-12 17:20:45 +01:00
4af788e963
Placeholder proxy text
...
- based on what tor you're probably using (9150 for OSX and Windows,
9050 for others)
2016-11-12 15:41:58 +01:00
PyBitmessage Translations
a6ac128e9e
Auto-updated language eo from transifex
2016-11-10 21:56:09 +01:00
PyBitmessage Translations
7033527c41
Auto-updated language pl from transifex
2016-11-10 21:55:24 +01:00
PyBitmessage Translations
0a948d382a
Auto-updated language de from transifex
2016-11-10 21:54:24 +01:00
PyBitmessage Translations
87f607688f
Auto-updated language sk from transifex
2016-11-10 21:52:21 +01:00
e9a3ef465c
OpenCL vendor selector
...
- when you have multiple OpenCL drivers at the same time, e.g. intel and
nvidia, they won't mix leading to crashes. This patch makes it
possible to select which driver to use by listing the available
vendors
2016-11-10 21:43:10 +01:00
756f85c9f0
Don't connect to yourself when hidden service
2016-11-08 08:49:43 +01:00
a7f3afe5a6
Typo
2016-11-05 00:46:07 +01:00
8ce72d8d2d
Extended encoding updates
...
- more flexible and developer friendly. Still not active code
2016-11-03 22:41:36 +01:00
020a78b776
Exception prevention in hashCount
...
- I got a report that an exception can occur, and while I can't
reproduce it, this should avoid it
2016-11-01 14:44:39 +01:00
PyBitmessage Translations
c94492f17e
Auto-updated language pl from transifex
2016-10-30 03:18:00 +01:00
PyBitmessage Translations
976b11a307
Auto-updated language sk from transifex
2016-10-30 03:15:25 +01:00
ecbb985cb3
Newchandialog translation definition
...
- the ui file wasn't included in the source list
2016-10-28 22:31:50 +02:00
3d4869851e
Many changes on chan create/join dialog
...
- refactored to use the .ui file
- input logic change, address is always optional
- interactive input validation
- runs asynchronously to the main window
- address generator thread can now validate chans in addition to just
adding them
2016-10-28 22:07:16 +02:00
5c9bfe09a2
Parser queue flushing
...
- the parser queue wasn't flushed when there's an exception resulting in
the wrong message being displayed selected
2016-10-27 23:09:31 +02:00
PyBitmessage Translations
22eb4d62bf
Auto-updated language de from transifex
2016-10-26 22:32:18 +02:00
PyBitmessage Translations
419affa3b3
Auto-updated language sk from transifex
2016-10-26 22:21:58 +02:00
PyBitmessage Translations
5299d025a8
Auto-updated language de from transifex
2016-10-26 05:05:51 +02:00
PyBitmessage Translations
04f0b6335d
Auto-updated language sk from transifex
2016-10-26 04:56:43 +02:00
781ea8a8a6
Typo
2016-10-26 02:19:26 +02:00
30d9de008f
Label change fix
...
- when changing an addressbook label using UTF-8, the correspnding
messagelist label was garbled
2016-10-25 07:54:52 +02:00
a3584bb141
"From" combobox empty fix
...
- if label of your address is empty, the "From" combo box showed an
empty entry (just the identicon). Now it shows the address instead
- fixes #898
2016-10-25 02:51:09 +02:00
b0d1ed8304
Make clear that address error message refer to the recipient
...
- a user report indicated there is confusion about address error
messages. He/she thought it refers to the sender address, however it
refers to the recipient address. This makes it more clear
2016-10-24 22:33:13 +02:00
ad0d2c375a
Recipient address error message status bar unicode fix
...
- when reporting an error about recipient address in the status bar, it
didn't correctly handle unicode
2016-10-24 22:31:54 +02:00
2c972fbe41
"Fetch Namecoin ID" button font size fixed
2016-10-24 22:29:14 +02:00
671f321ead
HTML parser fix
...
- the UTF-8-ifying of tags had missing brackets
2016-10-23 18:35:20 +02:00
40090a9a12
Notify in UI if time offset wrong
...
- if your time is off by more than an hour, you won't be able to
establish a connection to the network. This patch adds a UI
notification so that the user can understand why he can't connect.
2016-10-23 10:12:49 +02:00
c335ef7d10
HTML parser fix
...
- sometimes, a tag attribute name is UTF-8, sometimes it isn't. This
change makes it handle both
2016-10-23 09:02:27 +02:00
32f1e0447a
Multiprocessing PoW fixes and improvements
...
- the multiprocessing PoW should now work correctly
- it also should be interruptible correctly and the GUI will ask about
it during exit
2016-10-22 05:00:35 +02:00
9dd09a44fc
Message list loading performance improvement
...
- by disabling UI updates (which are not necessary as it freezes
anyway), the message list loading is faster
2016-10-22 01:47:29 +02:00
47e2df86b9
Freezing message parser fix #2
...
- this has been tested on Windows as well, and has been cleaned up.
There is now a permanent parser thread, and it restarts when the
parsing takes more than 1 second
- Fixes #900
2016-10-22 01:45:32 +02:00
8f194296e7
Long message parsing fix
...
- while 448ceaa74cFixes #900
2016-10-21 15:54:02 +02:00
2067040ff1
MessageView localisation fix
2016-10-20 20:38:21 +02:00
448ceaa74c
Line wrap performance workaround
...
- some messages (e.g. some long messages on Windows, or binary data)
cause an excessive amount of time in rendering the body. This
change is base on a workaround I found at
http://www.qtcentre.org/threads/8188-bug-setLineWrapMode
2016-10-20 20:26:53 +02:00
96212693b2
Message does not need plurals
2016-10-20 16:54:25 +02:00
3a1d581c9e
Multiple UI status updates
...
- most status messages are transient, so they are now only displayed for
10 seconds
- when trying to quit while disconnected or not fully synced, a
three-choice message box now appears: Yes for waiting, No for
closing anyway, and Cancel for aborting the shutdown procedure
2016-10-20 16:06:46 +02:00
e1dd29bfd1
Copyright UTF8 character fix
...
- this copyright character has been plaguing pylupdate4 parser and
multiple unsuccessful attempts have been made and then reverted.
Replaced with a HTML entity, hopefully this will finally fix it.
2016-10-20 02:50:00 +02:00
4436c5f3d1
More proxy fixes
...
- proxy connection should be able to handle IPv6 correctly
- UI status bar notification typo fix
2016-10-20 02:49:07 +02:00
ab79ee2a04
Proxy error handling
...
- UI will now display notifications in the status bar if the connection
to the proxy itself is broken. This should give better feedback to
people who are unfamiliar with tor and misconfigured it
- The proxy error handling in the background was slightly improved as
well
2016-10-20 01:49:40 +02:00
Marius Ghita
7aecb4aad1
Hide connection notifications configuration option
...
New option on the User Interface settings tab, to hide connection
notification messages.
2016-10-11 19:14:06 +02:00
9590f83820
Typo
...
- see
e6ce73f4bd (commitcomment-19344095)
2016-10-08 10:01:34 +02:00
679e554c7d
Translation source update
2016-10-05 20:50:07 +02:00
1b03b535cf
Translation source fix
2016-10-05 20:49:32 +02:00
73ec6a9174
Translation source fix
2016-10-05 20:30:05 +02:00
739d46004c
Translation source fix
2016-10-05 20:29:42 +02:00
e6ce73f4bd
Multiple PoW updates
...
- fixes "fast python" (multiprocessing) PoW
- python PoW (both slow and fast) interruptible on *NIX
- signal handler should handle multiple processes and threads correctly
(only tested on Linux)
- popul window asking whether to interrupt PoW when quitting QT GUI
- PoW status in "sent" folder fixes and now also displays broadcast
status which didn't exist before
- Fixes #894
2016-10-05 20:06:47 +02:00
029b0525de
Fix invalid variables
2016-08-31 16:33:25 +08:00
cc90747da1
Improve namecoin init error handling
...
- partially addresses #896
2016-08-31 16:24:28 +08:00
59dba6a7c7
Namecoin error logging changes
...
- namecoin connection errors have now severity "info" instead of
"error", because it just confuses peopel who don't have namecoin
configured
- partially addresses #893
2016-08-29 12:13:08 +08:00
61a08299b8
Less confusing message when logger config missing
...
- if the logger config is missing, don't print unnecessary stack trace
- partially addresses #893
2016-08-29 11:56:21 +08:00
2616a9d4c1
Fix PyGI warnings
...
- Partially addresses #893
2016-08-27 21:47:40 +08:00
d1a90085b7
Version bump for 0.6.1
2016-08-21 11:56:25 +02:00
35eca9c05d
Translation update
...
- added Polish
- regenerated binaries
2016-08-21 08:06:22 +02:00
9aa253f73e
Update translations
...
- refresh english source
- update others from transifex
2016-08-21 07:59:06 +02:00
8df8d15cba
Keep known nodes for 28 instead of 2 days
2016-08-21 07:28:33 +02:00
c58c1969e5
Increase width of TTL slider
...
- horizontal slider was too narrow and unusable on the latest Fedora.
Increased size and tested at 800x600 to make sure it's not too wide
now.
2016-08-21 07:23:46 +02:00
67c3d7bbca
Add "Mark all messages unread" context menu item
...
- account context menu how has a "Mark all messages unread" item
- folders now have a context menu as well and it has this item too
2016-08-20 22:38:36 +02:00
ca031dc421
More namecoin fixes
...
- namecoin lookup now also includes name of the record in the recipient
field
- namecoin lookups now support multiple semicolon-separated
recipients like the other recipient-related functions. If there are
multiple recipients, namecoin lookup will look up the last entry on
the line, for example if you have "a; b; c" in the recipient line,
it will lookup "c"
2016-08-17 22:02:41 +02:00
29abf0fa08
Namecoin fixes
...
- Namecoin support was broken, an anonymous contributor sent a patch,
and I made another fix for keepalive connections.
2016-08-17 17:26:00 +02:00
4117195b61
Don't freeze when out of known nodes
...
- bitmessage could end up having no known nodes and then it would
freeze. Now it shouldn't freeze, however it can still end up without
known nodes until a restart in some cases (e.g. when suspending the
computer for more then 3 days while BM is running)
2016-08-14 15:03:18 +02:00
306a2495e0
Recipient label UTF-8 fix
...
If recipient label had UTF-8 characters, clicking Send would trigger a
decoding error and woudln't send.
2016-08-14 12:56:28 +02:00
60c447f56b
Merge commit 'd3a0404274e5105b9d6279901246af8f7009eb6d' into v0.6
...
- "env python2.7.x" was causing problems
2016-08-14 12:44:18 +02:00
45630b779b
Merge commit 'afa715cf1b113f970ab9b698e4acad33178836ef' into v0.6
...
- change default time and date format (when running BM for the first
time)
2016-08-14 12:37:20 +02:00
de2fb17959
Keep system language when changing settings
...
- when language was set to "system settings" and you changed any setting
while BM was running, it switched the language to English.
2016-08-14 12:01:00 +02:00
233a30f114
SMTPd bugfix
...
- missing import prevented the SMTP server from working
2016-07-22 08:10:56 +02:00
36a04fd7d9
Add SMTP server
...
- you can now use SMTP to send messages
- uses bmaddr.lan domain
- runs on 127.0.0.8425 if you set "smtpd" to True
- mandatory authentication with smtpdusername and smtpdpassword
2016-07-19 13:57:54 +02:00
ng0
d3a0404274
Fix python shebangs from #!/usr/bin/env python2.7*' to #!/usr/bin/python2.7'.
...
* src/bitmessagecli.py: fix it.
* src/bitmessagemain.py: same.
This fixes #887 .
2016-07-16 15:42:19 +00:00
8e066eaa97
Add SMTP delivery labels
...
- SMTP delivery now has from and to labels for local addresses
2016-07-09 09:58:01 +02:00
b8a08a0ce9
Fix python PoW
...
- recent changes cause the pool workers to trigger shutdown and freeze.
Now python PoW works again
2016-06-30 23:03:39 +02:00
685ff6cecd
Startup fixes
...
- correctly test for "smtpdeliver" variable without crashing
- new method for safely getting values from config even if the option
may be missing
2016-06-30 15:19:58 +02:00
d3e8771aed
Lock file fixes
...
- daemon mode lock file didn't work correctly in the last commit
2016-06-30 13:07:28 +02:00
4865659d72
Main process fixes
...
- handles old dialog versions better if using curses
- can spawn SMTP delivery thread if configured (only when in daemon
mode)
- daemonized mode now works more like it's properly supposed to on unix
(double fork etc). You may have to adjust your init scripts, when
when using upstart for example you should now use "expect daemon"
- daemon mode now cleanly shuts down when TERM/INT signal is received
2016-06-30 12:30:05 +02:00
e5c9e6d383
Curses fixes
...
- curses interface should now work with older versions of dialog
- Fixes #711
2016-06-30 12:28:17 +02:00
3d9c036129
SMTP delivery thread
...
- thread can deliver incoming messages over SMTP
- this commit just contains the thread, subsequent commits will enable
it
2016-06-30 12:27:36 +02:00
6895da7f65
Quit immediately if disk full
...
- PyBitmessage only used to quit on disk full when running in daemon
mode. When this happened with the QT-GUI, it would end up in a
half-frozen status instead. Quitting is a safer choice
Fixes #572
2016-06-29 22:08:34 +02:00
e649adbe37
Framework for extended message encoding
...
- helper classes for encoding/decoding messages
- includes both old as well as new extended one (msgpack+zlib)
- the classes are unused yet and are supposed to be for experimenting
2016-06-24 22:45:56 +02:00
6add48e036
UPnP fix
...
- it looks like some UPnP server implementations consider NewRemoteHost
to be a mandatory tag
2016-06-22 22:54:06 +02:00
0689525d61
UPnP fixes
...
- detects WANPPPConnection vs WANIPConnection
2016-06-21 10:11:15 +02:00
efa12c3ac6
Do not connect on shutdown
...
- in some cases, such as when using trustedpeer, outgoingSynSender
threads would wake up and try to connect. This fixes it.
2016-06-18 20:35:16 +02:00
Louis-Guillaume DUBOIS
afa715cf1b
Fixes #867 - Changes default time format to %c
2016-06-18 14:19:23 +02:00
cec2233043
Fix about dialog
...
- Last commit broke the about dialog, this fixes it again.
2016-06-17 19:58:16 +02:00
d9ca8d1e5e
Fix UTF8 character in translation source
...
- "About" dialog did not correctly interpret source UTF-8 characters
2016-06-16 14:06:36 +02:00
ca297cafed
Delete old nodes
...
- cleanup will delete nodes that are older than 3 days
2016-06-15 18:45:23 +02:00
65211703c0
Try UTF-8 locale encoding
...
- setlocale didn't always try UTF-8, and on systems that only had UTF-8
encoding of the selected locale, this would fail to change locale
Fixes #872
2016-06-14 21:57:40 +02:00
0dd54e606d
Multiple connections on hidden service fix
...
- there was a bug which prevented multiple parallel connections on
hidden service
2016-06-10 18:01:46 +02:00
b0446f412a
Prevent leaking of tor relay IP
...
- when running a hidden service, the IP of the tor relay was a part of
the verack message. In setups where it's not 127.0.0.1 it may leak
info about network topology
- thanks for an anonymous bug report
2016-06-10 13:21:31 +02:00
fbed1eff31
Socks error handling
...
- Socks errors are now handled in a smoother manner
2016-06-10 12:43:37 +02:00
f242d409fd
Tor hidden service fixes
...
- will send the correct combination of hostname and port
- if proxyhostname is a hostname and an IP address, it will now allow
multiple parallel connections for hidden service
2016-06-10 10:44:42 +02:00
1a40c29d22
Add Tor hidden service support
...
- PyBitmessage can now run as a hidden service on Tor
- three new variables in keys.dat: onionhostname, onionport, onionbindip
- you need to manually add a hidden service to tor
2016-06-07 21:59:48 +02:00
33991f4598
Implement node priority
...
- prioritise connecting to nodes that were online more recently
- hidden service nodes have a higher priority if using tor
2016-06-07 12:23:47 +02:00
c11dd67e50
Translation update
...
- Russian, French, Italian, Portuguese and Esperanto updated from
transifex
2016-06-05 10:13:23 +02:00
9e2389306b
BSD compile fixes
...
- bitmsghash should now build and run on BSD (thanks for
FreeBSD/Dragonfly maintainers for assistance)
- if it cannot detect the number of cores, will default to one thread
(previously it broke)
2016-05-24 09:42:49 +02:00
e353af3195
Locale encoding fixes
...
On non-Windows, setlocale will try both normalised and preferred
encoding.
2016-05-24 08:44:07 +02:00
6dff105a5b
Unread count and subscriptions
...
- unread count was optimised (based on profiling)
- unread count is now accurate
- listing subscription messagelists and count fixed
2016-05-23 11:11:44 +02:00
b194e4ca20
Bump version to 0.6.0
2016-05-02 21:51:46 +02:00
75eef9ef2f
Fix merge conflicts
...
Missed this difference in the last commit
2016-05-02 17:33:18 +02:00
aabf600c38
Fix incorrectly resolved merge conflicts
...
Two file merge conflicts, __init__.py and upnp.py, were not resolved
correctly by the automatic resolving (probably because the affected code
was written by other people and I merged them into mailchuck fork). This
changes it to the same code that is in the mailchuck fork)
2016-05-02 17:10:45 +02:00
eebf264552
Translations update
2016-05-02 16:07:58 +02:00
10a3d2d28a
Add uPnP translation source
2016-05-02 15:00:26 +02:00
mailchuck
b724d3ee4f
Copyright year updates
2016-05-02 15:00:26 +02:00
mailchuck
444edbd6a3
Subscription folder loading fix
2016-05-02 15:00:26 +02:00
02a593fc7f
Translation source update
2016-05-02 15:00:26 +02:00
mailchuck
3f1f3e9b3b
Remove default debugging
...
Only log errors. Can be overriden by a config file.
2016-05-02 15:00:26 +02:00
mailchuck
9edde110a2
Translation update
...
Some function calls were not being identified as text that should be
translated.
2016-05-02 15:00:26 +02:00
mailchuck
9193c2070e
Labels when replying
...
If present, a label will be included in the reply line edit.
2016-05-02 15:00:26 +02:00
fabfc91e8f
Translation source update
2016-05-02 15:00:26 +02:00
mailchuck
4013bd31fd
Time & date Windows encoding
...
On Windows, the encoding was always the default windows encoding and
didn't change when you use a language in BM that required a different
encoding. This affected mainly date & time in the received column and
the startup info on the network status tab.
2016-05-02 15:00:26 +02:00
mailchuck
88678eab3a
Sent table header
...
Inbox/Sent table header for the last column now adjust (previously, both
were "Received", now the latter is "Sent).
2016-05-02 15:00:26 +02:00
mailchuck
5afdc052ff
Retranslate fix
...
Update identities tree context menu on language change.
2016-05-02 15:00:26 +02:00
mailchuck
58481afda2
Completer unicode fixes
2016-05-02 15:00:26 +02:00
mailchuck
46edb72b4f
Send from addressbook label
...
When choosing an item from addressbook to send to, put both label and
address into the lineEditTo widget.
2016-05-02 15:00:26 +02:00
mailchuck
98313d594f
Sender autocompletion
...
Sender autocompletion now works, and is based on the l labels in the
addressbook (i.e. all addressbook entries, all subscriptions and chans).
Repurposed C code from
https://stackoverflow.com/questions/21773348/how-to-force-qcompleter-to-check-second-word-in-qlineedit
2016-05-02 15:00:26 +02:00
mailchuck
b8667864f5
Addressbook exception fix
...
The avatar was throwing an exception.
2016-05-02 15:00:26 +02:00
61ae94098d
Translations update
...
English source plurals updated.
2016-05-02 15:00:26 +02:00
mailchuck
94d5eeb16f
Unread count fixes
2016-05-02 15:00:26 +02:00
ad6d55cebe
Translations update
...
- TTL hours/days now has correct plurals/paucals
- TTL description updates better when changing language (was "X days")
- language sources updated
2016-05-02 15:00:26 +02:00
658d52fb4f
TTL/Send tab fixes
...
Now stretches correctly and does not unnecessarily shorten the text.
2016-05-02 15:00:26 +02:00
mailchuck
ddb48cad86
Typo
2016-05-02 15:00:26 +02:00
mailchuck
83cc25fef5
Typo
2016-05-02 15:00:26 +02:00
e8b1e1adcf
Localisation update
...
The plural/paucal form support was not compatible with pylupdate4, it
didn't correctly parse the 3-argument calls to translate.
This fixes it, and updates the sources accordingly.
2016-05-02 15:00:26 +02:00
mailchuck
360d41792c
Tab labels
...
Network status and Blacklist labels fix.
2016-05-02 15:00:26 +02:00
mailchuck
cb1c8157fe
Objects to be synced timer
...
Now updates together with bandwidth every 2 seconds.
2016-05-02 15:00:26 +02:00
mailchuck
b7fefb3c40
Windows locale fix
...
Python locales (e.g. for time and date) didn't work on Windows.
2016-05-02 15:00:26 +02:00
3be851297c
Translation updates
...
- regenerated sources
2016-05-02 15:00:26 +02:00
92e3e62640
Locale fix
...
Date formatting sometimes didn't use the correct locale encoding
2016-05-02 15:00:26 +02:00
mailchuck
c29f266020
Translation fixes
...
- locale name is properly normalised rather than simply changing the
string
- translations now support plurals/paucals
- networkstatus updated
2016-05-02 15:00:26 +02:00
9e10d714aa
Translation update
...
Refresh sources.
2016-05-02 15:00:25 +02:00
38700a1721
Network Status tab translations update
...
- remembers startup time
- kB instead of KB
- stream table and status texts scale and aren't cut if they translated
text doesn't fit
2016-05-02 15:00:25 +02:00
af098e4805
Locale for non-QT UI strings
...
Some parts of strings did not use the proper locale. For example, date
and time strings was always output with the US locale. This fixes it.
There are still some cases where localisation is not implemented, and
could be changed from str(string) to locale.str(string).
2016-05-02 15:00:25 +02:00
0507411696
Shutdown fix
...
The GUI shutdown changes sometimes caused freezes on linux.
2016-05-02 15:00:25 +02:00
mailchuck
3dbb4d5ce9
GUI shutdown improvements
...
- it shows that it needs to wait for PoW to finish
- it waits a bit for new objects to be distributed
- it displays a better progress indicator in the status bar
Previously, people who don't understand how PyBitmessage works sometimes
shut it down immediately after they wrote a message. This would have
caused the message to be stuck in the queue locally and not sent. Now,
it will indicate that the PoW still needs to work, and it will wait a
bit longer so that the message can spread. It's not a completely correct
approach, because it does not know whether the message was really
retrieved after the "inv" notification was sent.
2016-05-02 15:00:25 +02:00
mailchuck
167da731d0
Make new version notifications less intrusive
...
Now only in status bar and no more popup window.
Previously, it only showed once until a restart, but now it shows every
time it detects a new version online. Since it does not show a popup
window it's not a big deal.
2016-05-02 15:00:25 +02:00
2f27d43e7e
PoW can sometimes be shutdown-able
...
Python and OpenCL PoW now stop when PyBitmessage shutdowns. C PoW needs
additional support in C so it doesn't work there yet.
2016-05-02 15:00:25 +02:00
5adc4429f0
Translations update
...
- synced translations from Transifex
- updated source
- added Slovak translation
2016-05-02 15:00:25 +02:00
70e06c33f6
Remove some debugging
...
Language loading debugging not necessary.
2016-05-02 15:00:25 +02:00
fd4329bee0
Refactor localisation
...
The language combo box is generated dynamically from the list of
available translations in the translations directory. This allows the
users to add their own translations without having to change the code.
2016-05-02 15:00:25 +02:00
mirrorwish
a7ec4c0555
Some preparations for python 3
2016-05-02 15:00:25 +02:00
be16be2bb4
Translation update
...
Updated English source strings.
2016-05-02 15:00:25 +02:00
d46fd6f486
Translation fix
...
Plural form fix
2016-05-02 15:00:25 +02:00
d625659cc6
User agent parser fix
2016-05-02 15:00:25 +02:00
ca11852632
Translation source update
...
NewSubscriptionDialog missing string updated.
2016-05-02 15:00:25 +02:00
baff42f578
Typo
...
String typo, also updated translation source.
2016-05-02 15:00:25 +02:00
e9f62efa4b
Default compose body "untranslate"
...
There is no reason to retranslate the default message/broadcast body,
and the default was just confusing HTML with no content.
2016-05-02 15:00:25 +02:00
d25a1302ce
Version bump
2016-05-02 15:00:25 +02:00
858e93befd
Update build scripts
...
- PyInstaller script (e.g. for Windows)
- build_osx.sh for OSX
2016-05-02 15:00:25 +02:00
de14730ad9
Translations update
...
- synced with Transifex
2016-05-02 15:00:25 +02:00
c30433cdaa
"All accounts" internationalisation fix
2016-05-02 15:00:25 +02:00
412e175f27
Translation updates
...
Added a RetranslateMixin. Since PyQT does not support automated language
changes of UI files (like the C++ QT does), this implements something
similar. It assumes that the UI file has the same name as the class, but
lowercase.
Added RetraslateMixin to the new blacklist and networkstatus interfaces.
2016-05-02 15:00:25 +02:00
ecfa18b1c6
Change UI loading for frozen
2016-05-02 15:00:25 +02:00
8b605a874a
Translation updates
...
- add missing files into translation definition
- refresh english strings
- change context for "networkstatus"
2016-05-02 15:00:25 +02:00
0f267c94c7
Translations update
...
- added Danish translation (thanks @mirrorwish)
- added English translation (to serve as a source for other
translations)
2016-05-02 15:00:25 +02:00
491579c368
Translations update source files
2016-05-02 15:00:25 +02:00
mirrorwish
554627dd92
Refactor Inventory
2016-05-02 15:00:25 +02:00
mirrorwish
7800272d3a
Refactor Blacklist tab
2016-05-02 15:00:25 +02:00
mirrorwish
337cf93b4b
Fix byte formatting
2016-05-02 15:00:25 +02:00
24ae23946b
Translations config file update
2016-05-02 15:00:25 +02:00
mirrorwish
69aa618890
Combine all translation project files into one
2016-05-02 15:00:24 +02:00
mirrorwish
a23022b2db
Refactor Network Status tab
2016-05-02 15:00:24 +02:00
mirrorwish
64fce79321
Refactor status icon
2016-05-02 15:00:24 +02:00
mailchuck
4f56e49a30
Unread count refresh updates
2016-05-02 15:00:24 +02:00
mailchuck
66824c32d1
sqlExecute now returns rowcount
...
This allows tracking of how many rows were changed, for example for
UPDATE, DELETE, INSERT.
2016-05-02 15:00:24 +02:00
mailchuck
8172fce730
Typos
2016-05-02 15:00:24 +02:00
mailchuck
a63f9054f4
Global Sent fix
2016-05-02 15:00:24 +02:00
mailchuck
0ab0e6757a
Restrict pending parallel requests on proxy
...
This saves some network resources if using Tor, for example.
2016-05-02 15:00:24 +02:00
1b50f3898a
UPnP fixes:
...
- external port iterator fix
- error handler fix
2016-05-02 15:00:24 +02:00
mailchuck
a1b44aab44
UPnP fixes
...
- UPnP handles errors better
- it tries to bind external interface (previously sometimes it searched
on 127.0.0.1 resulting in no routers being detected)
2016-05-02 15:00:24 +02:00
e03803e4e8
Translations update
...
Updated translation source files
2016-05-02 15:00:24 +02:00
f8dcb965ea
Grammar fix
...
- Fixes #179
- Thanks to @Erkan-Yilmaz
2016-05-02 15:00:24 +02:00
d63ecfc566
Translation update
...
- typos
- updated German translation
- Fixes Bitmessage#844
2016-05-02 15:00:24 +02:00
3fcaa47232
Ack received translation typo
...
Fixes Bitmessage#644
2016-05-02 15:00:24 +02:00
143abe3c34
Preliminary Tor hidden service support
2016-05-02 15:00:24 +02:00
c5363c3c5e
Add bitcoin URI handler for message viewer
2016-05-02 15:00:24 +02:00
2e47ab0cd2
Keyboard modifiers with quick navigation
...
The quick navigation key disrupted keybindings with keyboard modifiers,
like Ctrl-C for copy. This restricts the quick navigation only where no
keyboard modifiers are active.
Fixes #184
2016-05-02 15:00:24 +02:00
a30d5af948
Global Sent and Trash folders
2016-05-02 15:00:24 +02:00
mailchuck
8d8cfe8555
More unicode fixes
...
Addresses #180
2016-05-02 15:00:24 +02:00
mailchuck
da036c6b6b
UTF fixes
...
Label edits now accept and save utf8 characters.
Addresses #180
Still need to check how it behaves on invalid chars.
2016-05-02 15:00:24 +02:00
mailchuck
47bc85f0b6
Sent folder in chans extended
...
Previously, it only showed message sent to the selected chan address.
Now it shows both those sent to and sent from the chan address.
Fixes #181
2016-05-02 15:00:24 +02:00
mailchuck
d8aa484b8c
Email gateway interface usability improvements
...
- don't allow status request / settings unless registered already
- if registered, status request is the default selected option
Fixes #182
2016-05-02 15:00:24 +02:00
mailchuck
2adafdaadc
Improved URI detector
2016-05-02 15:00:24 +02:00
mailchuck
ed5c8a01ef
loadResource incorrect parameters
2016-05-02 15:00:24 +02:00
mailchuck
a79f6cce3b
Clipboard copy unicode
...
Copying unicode subjects to clipboard didn't work.
Fixes #183
2016-05-02 15:00:24 +02:00
113ceb0868
Email links "From"
...
Clicking email links now sets "From" based on the message the link is
in.
2016-05-02 15:00:24 +02:00
af193a1bca
Keybindings
...
- delete key now works when message body is focused as well
- N for next message (down)
- P for previous message (up)
- R for reply
- C for compose
- F for find
- Find is now dynamic if the search text is least 3 characters long
Fixes Bitmessage#655
Addresses #155
2016-05-02 15:00:24 +02:00
9e2ae4eeb5
Allow close to tray
...
PyBitmessage can now close to tray. Even though the main code was there,
the UI and config variable were missing.
Fixes Bitmessage#564
2016-05-02 15:00:24 +02:00
b3b69b1eac
deleteRowFromMessagelist implementation
...
Rows are deleted from a message list in multiple places, and this is an
attempt to refactor it so that it is done in one function. It's not used
anywhere yet.
2016-05-02 15:00:24 +02:00
976af4b3cd
Empty resource loader for messageview
...
MessageView does not currently load external resources (QTextBrowser by
default interprets all external resources as local file names and tries
to load them like that. This can, in the future, be implemented. For
example, if SOCKS (Tor) is used, the resource could be loaded through
the SOCKS too.
This commit is a skeleton for it that does not actually do anything and
can be filled with an implementation that does the loading.
2016-05-02 15:00:24 +02:00
96a1726426
Clickable email and http links in plain text
...
Email addresses and URIs are now clickable when viewing a message in
plain text mode. Clicking an email address moves to the Send tab, while
clicking an URI has the same result as clicking an URI in html mode, it
will ask for confirmation before opening it in external handler.
2016-05-02 15:00:24 +02:00
f27ca0d3d6
HTML parser updates
...
HTML parser wasn't correctly handling img tags.
Now it also by defaults disabled external schemas to prevent
deanonymisation (even though the renderer actually doesn't support
external schemas at the moment)
Addresses #178
2016-05-02 15:00:24 +02:00
b202ac6fab
Do not allow port 0
...
Attackers injected node addresses with port 0 into the network. Port 0
is unusable on many OSes and can't be listened on. PyBitmessage won't
accept nodes that have port 0 anymore.
2016-05-02 15:00:24 +02:00
9239813ebb
Constant time decryption
...
Always try to decrypt with all keys.
2016-05-02 15:00:24 +02:00
4c2ce7208c
Sleep on invalid getdata
...
- postpone initial sleep until the first getdata is received
- also sleep when received a getdata request for an object that hasn't
been advertised to the other node yet
2016-05-02 15:00:24 +02:00
1a92db54c9
Process gateway registration rejections
...
A message from gateway registration addres regarding registration
rejection is processed and a dialog displayed to get a new email
address.
Fixes #14
2016-05-02 15:00:24 +02:00
6b8f255a60
Email gateway updates
...
- settings option available
- reduce max TTL to 2 days
2016-05-02 15:00:24 +02:00
2b6bffc7ff
Email gateway account status query
...
- addresses #14
2016-05-02 15:00:24 +02:00
db84d699db
Search improvements
...
- selecting a new folder will apply search
- newly arrived message will consider search
- fixes #166
2016-05-02 15:00:24 +02:00
218bdf38e1
Better error reporting for log config
...
Fixes #174
2016-05-02 15:00:24 +02:00
ab974abce0
Sent message status on ACK
...
Fixes #176
2016-05-02 15:00:24 +02:00
8f5d305242
Mitigate active internal intersection attack
...
There was a report that by quickly asking a large number of nodes if
they have an ACK object (which the attacker knows but it is injected
into the network by the recipient of the message), it can estimate how
an object propagates through the network, and eventually pinpoint an
originating IP address of the injection, i.e. the IP address of the
message recipient.
This patch mitigates against it by stalling when asked for a nonexisting
object (so that the attacker can't spam requests), and also upon
connection before sending its own inventory list (so that reconnecting
won't help the attacker). It estimates how long a short message takes to
propagate through the network based on how many nodes are in a stream
and bases the stalling time on that. Currently that is about 15 seconds.
Initial connection delay takes into account the time that already passed
since the connection was established.
This basically gives the attacker one shot per a combination of his own
nodes and the nodes he can connect to, and thus makes the attack much
more difficult to succeed.
2016-05-02 15:00:24 +02:00
f43e01ed0e
Don't send ACK on subscribed chans
...
If somehow you manage to send a message that includes an ACK part into a
chan, the subscribers would send the ACK back. This shouldn't happen.
2016-05-02 15:00:23 +02:00
40f0ff381e
blacklist rendering edit fix
...
Editing of blacklist labels affected the rerendering, because it emits
the changed signal too, and it caused an exception because the address
field was missing at that time. This works around both.
2016-05-02 15:00:23 +02:00
0bd89103a7
Don't send unnecessary ACKs
...
In some situations, it's not necessary to send an ACK. For example, when
the sender is blacklisted, when the message has no content, or when the
address has ACK sending disabled.
Also it's not necessary to rebroadcast empty messages into a mailing
list.
2016-05-02 15:00:23 +02:00
mirrorwish
80c174e417
Save changes to blacklist labels
...
Fixes mailchuck/PyBitmessage#175
Signed-off-by: Peter Surda <surda@economicsofbitcoin.com>
2016-05-02 15:00:23 +02:00
mailchuck
bcae62938a
Unused variable
2016-05-02 15:00:23 +02:00
mailchuck
24a2deed8f
Cleanup lockfile on exit
...
singleton.py design was broken.
Fixed Bitmessage#775
2016-05-02 15:00:23 +02:00
mailchuck
4f26bf1059
private IP range checks
...
When advertising nodes and when establishing connections, private IP
range checks were not done. This could cause private IPs to be
advertised across the network. Also, some of the checks weren't
IPv6-aware.
Fixes Bitmessage#768
2016-05-02 15:00:23 +02:00
mailchuck
47f1c0c267
Thread names for IPv6
...
Thread names for IPv6 contained ":". This caused problems in log
parsers.
2016-05-02 15:00:23 +02:00
mailchuck
89752faceb
Newly arrives messages sorting
...
There could be cases where newly arrives message is not added correctly.
It won't necessarily go to the top, that depends on the sort.
2016-05-02 15:00:23 +02:00
mailchuck
3bde549e5c
Version bump for 0.5.7
2016-05-02 15:00:23 +02:00
mailchuck
185d212cb2
Unread count refresh on change
2016-05-02 15:00:23 +02:00
mailchuck
8f1e753cf0
Typo
2016-05-02 15:00:23 +02:00
mailchuck
140b3ddbb8
Test cleanup
...
Safer this way
2016-05-02 15:00:23 +02:00
mailchuck
66e1a26b33
Popup menu on folders
...
There are no functions associated with it but sometimes it popped up so
disable it.
2016-05-02 15:00:23 +02:00
mailchuck
7c99899248
updateText was deleted so no need to call it
2016-05-02 15:00:23 +02:00
mailchuck
2dc230db90
Tree rerendering cleanup
...
Fixes #76
2016-05-02 15:00:23 +02:00
mailchuck
1cc4fac7f4
Unread count cleanup
...
Addresses #128
2016-05-02 15:00:23 +02:00
mailchuck
f5187e16a0
BlackWhitelist rerendering
...
It used to show entries with no address.
Fixes #170
2016-05-02 15:00:23 +02:00
mailchuck
aae5b713b1
Disabling subscriptions should rerender addressbook
...
Addresses #76
2016-05-02 15:00:23 +02:00
mailchuck
4e4da254fa
Addressbook / Tree / Messagelist rendering
...
Some changes that didn't propagate correctly before now do.
Addresses #76
2016-05-02 15:00:23 +02:00
mailchuck
f159133f14
TreeWidget and Addressbook editing propagation
...
If you change, add or remove an item in a treewidget or addressbook,
messagelists will now autoupdate labels, and sender comboboxes will also
update if applicable.
Fixes #69
2016-05-02 15:00:23 +02:00
mailchuck
e6c379cca6
Scroll/zoom in message composing widget
...
Fixes #169
2016-05-02 15:00:23 +02:00
mailchuck
a4c48228fc
Messagelist subscription color
...
Fixes Bitmessage#842
2016-05-02 15:00:23 +02:00
mailchuck
484bdb0782
Quoting fixes
...
Message compose sometimes misinterpreted quoted message as HTML, causing
rendering screwups. Since we don't support HTML composing, we will treat
all quoted messages as plain text.
2016-05-02 15:00:23 +02:00
mailchuck
2597ac63f6
Zooming info percent based an single step
...
Zooming in message body view / compose works in single steps
irrespective of wheel sensitivity, and info about zoom level is
displayed in percent rather than font pixel size.
2016-05-02 15:00:23 +02:00
mailchuck
d36d6f300e
Message body display handling of spaces
...
After the changes in the message body renderer, spaces were not
correctly handled. Fixes #168
2016-05-02 15:00:23 +02:00
mailchuck
056512a715
Sent folder new message selection fix
...
Fixes Bitmessage#838
2016-05-02 15:00:23 +02:00
mailchuck
9353e8eff7
Message editor updates
...
- Does not allow changing fonts (it's ignored once it's sent anyway),
fixes #167
- Allows zooming, fixes #163
2016-05-02 15:00:23 +02:00
mailchuck
32b0d24be2
singleWorker shutdown fix
...
if singleWorker crashed, the thread couldn't be joined. This both makes
it so that it doesn't crash, as well as reorders the shutdown sequence
so that it is less likely to be triggered.
Fixes Bitmessage#549
2016-05-02 15:00:23 +02:00
mailchuck
ec4a16b388
objectProcessorQueue fixes
...
- it didn't shutdown correctly
- it didn't handle exception correctly (however, if I understand
correctly, this will never be triggered if using blocking get, so it
doesn't affect PyBitmessage)
- flushing size check changed from 1 to 0 (I don't know why it was 1)
2016-05-02 15:00:23 +02:00
47f0df6c0b
Object processor queue class
...
Previous commit didn't include the class. This class takes care of queue
size monitoring so that the system doesn't run out of memory.
2016-05-02 15:00:23 +02:00
e4f31d25fc
Flood mitigation optimisation
...
Flood mitigation was done both in the ObjectProcessorQueue as well as
receiveData threads. This patch removes the mitigation in receiveData
threads and cleans up the one in the ObjectProcessorQueue
2016-05-02 15:00:23 +02:00
mailchuck
2043d796dd
Typo
2016-05-02 15:00:23 +02:00
mailchuck
a0da175d45
Typo
2016-05-02 15:00:23 +02:00
mailchuck
c137e334d2
OpenSSL version for support contact form
2016-05-02 15:00:23 +02:00
mailchuck
dc34c00f38
Improve OpenSSL library finder
2016-05-02 15:00:23 +02:00
mailchuck
b7e24fab4a
DLL path fix in frozen mode
...
Addresses #152
2016-05-02 15:00:23 +02:00
mailchuck
6a965cd31a
Don't test for Qt in daemon mode
...
Initialisation of the daemon variable was missing at launch.
Fixes #161
2016-05-02 15:00:23 +02:00
itsexe
72f9e29931
fixed some spelling errors
2016-05-02 15:00:23 +02:00
mailchuck
98fab9c568
Message body focus on reply
...
Fixes #156
2016-05-02 15:00:23 +02:00
mailchuck
43a765515a
Remember current search
...
@rainulf What's the reasoning behind resetting the search?
Fixes #155
2016-05-02 15:00:23 +02:00
mailchuck
b699475906
Clicks in empty message shouldn't produce an error
2016-05-02 15:00:23 +02:00
mailchuck
46494dc3e6
"All accounts" can't be renamed
...
Minor error
2016-05-02 15:00:23 +02:00
mailchuck
f4c2cc5160
Unicode
...
- subject on replies was not parsed correctly (or should I say was
parsed more than necessary)
- unicode can handle invalid characters without needing a special
function
Fixes #164
2016-05-02 15:00:23 +02:00
mailchuck
962c36e122
Allow zooming of message body
...
Uses default system zoom settings (Ctrl-Wheel).
Fixes #163
2016-05-02 15:00:23 +02:00
mailchuck
4033b945ee
UPnP status bar update fix
2016-05-02 15:00:23 +02:00
mailchuck
1b36da9327
Save UPnP port
...
Fixes #129
2016-05-02 15:00:23 +02:00
mailchuck
27874df45f
Typo (missing)
2016-05-02 15:00:23 +02:00
mailchuck
3f2108b36f
Typo
2016-05-02 15:00:23 +02:00
mailchuck
e5675987a7
Fix frozen localisation (OSX)
...
Fixes Bitmessage#737
2016-05-02 15:00:23 +02:00
mailchuck
d7ff86705e
Fix frozen localisation
...
Addresses Bitmessage#737
2016-05-02 15:00:23 +02:00
mailchuck
6f74ffc265
Mac OSX portable mode path
...
Fixes #150
2016-05-02 15:00:23 +02:00
mailchuck
3b30afea29
Messagelist subject class
...
Messagelist subjects now are their own class. Fixes #153
Also fixes replies/clipboard for gatewayed messages.
2016-05-02 15:00:22 +02:00
mailchuck
d6ec2a2b8d
Version bump
2016-05-02 15:00:22 +02:00
mailchuck
0f24fe5a0c
Missing import
2016-05-02 15:00:22 +02:00
mailchuck
4647fcb876
Disable label rerendering in messagelist
...
It's broken and just consumes resources. I'll fix it separately.
2016-05-02 15:00:22 +02:00
mailchuck
e650cff42d
(Un)read messagelist items
...
Previous commits broke them, now it renders correctly again.
2016-05-02 15:00:22 +02:00
mailchuck
4b63c4c086
Address Qt.UserData fix
...
The previous commit broke places where UserData was read from the
mesagelist line, because it's now a string rather than a QVariant. This
actually simplifies things.
2016-05-02 15:00:22 +02:00
mailchuck
879a6f1d68
Messagelist loads faster
...
Addresses #149 . About 5 times faster.
2016-05-02 15:00:22 +02:00
mailchuck
0b4c57a516
Entries missing in messagelist
2016-05-02 15:00:22 +02:00
mailchuck
a8053195ea
Fix cdecl/stdcall DLL detection
...
Fixes #146
2016-05-02 15:00:22 +02:00
69494594d5
Main Window raising fixes
...
On OSX and linux, the tray icon now raises window.
Starting a new instance should raise the window too, but it may not work
on linux (on my Ubuntu it just flashes the icon)
Fixes Bitmessage#743
2016-05-02 15:00:22 +02:00
mailchuck
ff207c1b56
Portable mode fix
...
The option should not be available if the directory with the executable
is not writable, such as when running from a dmg on OSX.
2016-05-02 15:00:22 +02:00
mailchuck
4dbd444053
Logging fix
2016-05-02 15:00:22 +02:00
mailchuck
ea37913ff1
Html parser fixes
...
Raw mode improved, avoid HTML parser entirely and just replaces some
strings.
2016-05-02 15:00:22 +02:00
mailchuck
07cee7209b
Contact support fixes
...
- typos & formatting
- OS detection crash fixes
2016-05-02 15:00:22 +02:00
d0b9d75ce1
Fix contact support unix detection
2016-05-02 15:00:22 +02:00
mailchuck
4049662a3a
Contact support updates
...
Yes/No -> True/False
Add Portable mode
2016-05-02 15:00:22 +02:00
mailchuck
3e956509b2
Add PyBitmessage version to contact support
2016-05-02 15:00:22 +02:00
mailchuck
8359b8b202
Contact support user interface
...
Fixes #25
2016-05-02 15:00:22 +02:00
mailchuck
a727847e55
Addresses can be configured not to send acks
...
Manually by specifying "dontsendack" = true in the address section
2016-05-02 15:00:22 +02:00
mailchuck
4c8ba431e5
Add to blacklist from "All accounts"
...
It didn't work before
2016-05-02 15:00:22 +02:00
mailchuck
17d045da10
Sensible default maximum difficulty
...
Fixes #144
2016-05-02 15:00:22 +02:00
mailchuck
1f525da1ff
Link follow warning
...
The message box should be a warning rather than a simple question.
2016-05-02 15:00:22 +02:00
mailchuck
eb35f35b83
Add system translations
...
Items like dialog box buttons were not localised. This loads the default
qt localisation, and also unloads the old localisation on locale change.
Still needs to be adjusted for frozen.
Addresses Bitmessage#737
2016-05-02 15:00:22 +02:00
mailchuck
7ef94b446d
Lazy rendering of message contents
...
Message will render as user is scrolling down. This prevents interface
freezes on long messages (such as inline img in text mode). Fixes
Bitmessage##366
Also a minor fix in text mode rendering.
2016-05-02 15:00:22 +02:00
mailchuck
6557681a6c
Message has safe link opening
...
Links in message body (if in HTML mode) now open, but it asks for a
confirmation in a dialog box.
Fixes #27
2016-05-02 15:00:22 +02:00
mailchuck
751f9108d8
HTML detector and switcher
...
HTML messages are detected and if present, the top of the message
textedit displays a clickable area that switches HTML rendering on and
off.
Fixes #13
2016-05-02 15:00:22 +02:00
mailchuck
8ff5bf0464
Channel reply enhancement
...
When replying to a message sent to a chan, now you can choose if you
want to reply to chan or sender. Fixed #9
2016-05-02 15:00:22 +02:00
mailchuck
4e32125ca3
Copy to clipboard in messagelists
...
Fixes #142
2016-05-02 15:00:22 +02:00
mailchuck
e2fb34e2fb
More portable mode fixes
2016-05-02 15:00:22 +02:00
mailchuck
242c8fa9c2
More portable mode fixes
2016-05-02 15:00:22 +02:00
mailchuck
8136b022bc
Typos
...
Still regarding portable mode path fixes
2016-05-02 15:00:22 +02:00
mailchuck
5a45d7dd8f
Portable mode fixes
...
Fixes Bitmessage#379, Bitmessage#341
2016-05-02 15:00:22 +02:00
mailchuck
4f6fd07424
Joining chans interface freeze
...
Fixes #137
2016-05-02 15:00:22 +02:00
538642f236
Label for blacklisting sender fix
...
It wasn't properly utf-8-ied.
2016-05-02 15:00:22 +02:00
bdfaa90ecb
Auto-register for email gateway if necessary
...
If attempting to send to an email address from an unregistered
account, auto-send registration to mailchuck.
Use label if possible, otherwise random 12 characater address
Fixes #131
2016-05-02 15:00:22 +02:00
082eb823bb
New message appears if viewing account root
...
Fixes #132
2016-05-02 15:00:22 +02:00
mailchuck
d72e5647f4
Fix wrong account type initialiser
...
Addresses #14
2016-05-02 15:00:22 +02:00
mailchuck
27b8891ab4
Test commit policy commit
2016-05-02 15:00:22 +02:00
mailchuck
a5456f792c
Fix Addressbook context menu delete
2016-05-02 15:00:22 +02:00
mailchuck
41ac1b89d1
Frozen SMP re-disable try 2
2016-05-02 15:00:22 +02:00
mailchuck
549d91dc68
Re-disable windows SMP frozen support
...
The recommended workaround didn't work.
2016-05-02 15:00:22 +02:00
mailchuck
1625306be3
Version bump
2016-05-02 15:00:22 +02:00
mailchuck
bccc2406a2
Fix double unread count in tray icon
2016-05-02 15:00:22 +02:00
mailchuck
d54b22bb89
Initialise inventorySets earlier
...
In corner cases, they may be referenced before they are populated.
Probably fixes Bitmessage#530
2016-05-02 15:00:22 +02:00
mailchuck
52fe7105a9
Allow bootstrap from a Tor hidden service
...
I run a modified node as a Tor hidden service for bootstrapping node
addresses, and PyBitmessage can now connect to it.
2016-05-02 15:00:22 +02:00
mailchuck
27c187283b
Unify messagelist rendering
...
also some minor fixes
2016-05-02 15:00:22 +02:00
mailchuck
a3b13b70e2
Add BROADCAST type
...
also improve sorting
2016-05-02 15:00:22 +02:00
mailchuck
be02116af9
Global folder, global search, unread folder
...
Fixes #38
Fixes #39
Minor unread refresh issues.
2016-05-02 15:00:22 +02:00
mailchuck
6862952c55
Typo
...
OpenCL config variable setter had a typo
2016-05-02 15:00:22 +02:00
mailchuck
6ad3c956c9
Allow SQL arguments as a list or tuple
2016-05-02 15:00:21 +02:00
mailchuck
d75533c6b6
DNS bootstrap over Tor
...
If proxy type is SOCKS5, it will try to perform DNS bootstrap using the
Tor RESOLVE extension.
2016-05-02 15:00:21 +02:00
mailchuck
1e89616c0f
Avoid strings in account types
2016-05-02 15:00:21 +02:00
mailchuck
399100e6d8
PoW support code cleanup
...
Is now nicer and reports if OpenCL fails
2016-05-02 15:00:21 +02:00
mailchuck
9335f74c61
OpenCL kernel change
...
This makes it work on my AMD.
2016-05-02 15:00:21 +02:00
mailchuck
e7e245fe25
OpenCL GUI settings
2016-05-02 15:00:21 +02:00
mailchuck
0c19e0c2e4
Failure to connect shouln't be an error
...
It resulted in too many errors in the logs
2016-05-02 15:00:21 +02:00
mailchuck
d0b73eb211
SMP fix for frozen Windows
2016-05-02 15:00:21 +02:00
mailchuck
aa97b53114
addressGenerator fixes
...
- addressGenerator got stuck (introduced recently when cleaning up
shutdown
- do not put addresses into API return queue if API is inactive
- improve translation
2016-05-02 15:00:21 +02:00
mailchuck
f9a7a5b6f2
Account in treeWidget more like a QT class
...
It behaves more like a QT class is supposed to now, it's somewhat
cleaner.
Fixes #122
2016-05-02 15:00:21 +02:00
mailchuck
d69c2e097f
Cleaner shutdown
...
Addresses Bitmessage#549
2016-05-02 15:00:21 +02:00
mailchuck
6dbe20a25c
Version bump
2016-05-02 15:00:21 +02:00
mailchuck
7b4264a109
Typo
2016-05-02 15:00:21 +02:00
mailchuck
f77afe8fae
Exception handling
2016-05-02 15:00:21 +02:00
mailchuck
36ddbd365e
Typo
2016-05-02 15:00:21 +02:00
mailchuck
410c23e8c0
Typo
2016-05-02 15:00:21 +02:00
mailchuck
ff358b1a1f
Typo
2016-05-02 15:00:21 +02:00
mailchuck
ec68146135
Suppress error on releasing unlocked lock
2016-05-02 15:00:21 +02:00
mailchuck
e82e33fa51
UPnP notifications
...
UPnP will notify you through window status bar.
2016-05-02 15:00:21 +02:00
mailchuck
bbdfb1ea54
UPnP cleaner shutdown
2016-05-02 15:00:21 +02:00
mailchuck
e4a7e71790
SSL fixes
2016-05-02 15:00:21 +02:00
mailchuck
281630757e
SSL fixes
2016-05-02 15:00:21 +02:00
mailchuck
18f7ef06e2
SSL fixes
...
Handle old Python compatibility better.
2016-05-02 15:00:21 +02:00
mailchuck
74519069f0
outgoingSynSender thread reaping disabled
...
It was causing delays on shutdown, worse on linux/osx
2016-05-02 15:00:21 +02:00
mailchuck
b00c4f24ec
Threads close better
...
- UPnP and outgoingSynSender threads close slightly better.
- extPort initialisation was missing
2016-05-02 15:00:21 +02:00
mailchuck
48b9e50397
UPnP GUI
...
Settings GUI now contains a checkbox for UPnP and auto starts/stops the
thread when changed.
Default UPnP socket timeout decreased for faster thread
starting/stopping
2016-05-02 15:00:21 +02:00
mailchuck
50be5a2b4c
UPnP fixes
2016-05-02 15:00:21 +02:00
mailchuck
8c14641810
Window resize on minimize bugfix
...
Fixes Bitmessage#243
2016-05-02 15:00:21 +02:00
mailchuck
c03c563a74
Make UPnP into a thread
...
- UPnP is now a separate thread that will continue to setup UPnP
- shutdown waits for threads that shutdown correctly (Addresses
Bitmessage#549)
2016-05-02 15:00:21 +02:00
mailchuck
cc848cdb65
Typo fix
2016-05-02 15:00:21 +02:00
mailchuck
5432c6e0c8
UPnP logging improvlement
2016-05-02 15:00:21 +02:00
mailchuck
3c9df7151c
Logging fix
2016-05-02 15:00:21 +02:00
mailchuck
aa55f45a0d
Logging fix
2016-05-02 15:00:21 +02:00
0270dc3d4d
Cleanup UPnP
2016-05-02 15:00:21 +02:00
mailchuck
9338772b1e
Logging updates
...
Came over BM (from "general" channel), I slightly modified it.
2016-05-02 15:00:21 +02:00
mailchuck
b7ad34cf15
Trusted peer flood protection
...
Is not needed.
Fixed Bitmessage#786
2016-05-02 15:00:21 +02:00
mailchuck
960d446104
Ask before deleting a subscription
...
Fixes #120
2016-05-02 15:00:21 +02:00
mailchuck
c2970cd92e
Update addressbook on changes
...
Fixes #99
- enable/disable new/delete chan/subscription
- also found and fixed a logger crash
2016-05-02 15:00:21 +02:00
mailchuck
1f331f217c
Messagelist address tooltip
...
Fixes #108
2016-05-02 15:00:21 +02:00
mailchuck
8909a535ae
Remove extra debug logging
2016-05-02 15:00:21 +02:00
mailchuck
dd15d1b6ed
Delete key and shift modifier
...
Addresses #114
- delete from sent works when pressing delete key
- delete from trash deletes rather than moves
- delete with shift deletes rather than moves
2016-05-02 15:00:21 +02:00
mailchuck
cd9a7b5157
Missing folders in rerenderTabTreeSubscriptions
...
I optimised it too much and sometimes folders were missing in the tree.
2016-05-02 15:00:21 +02:00
mailchuck
d7817ca2ef
Smoother rerenderTabSubscriptions
...
Does not reset it all the time but adds/removes
Fixes #109
2016-05-02 15:00:21 +02:00
mailchuck
231219a193
Improved logging
...
Fixes #118
- changed almost all "print" into logger
- threads have nicer names
- logger can have configuration in "logger.dat" in the same directory as
"keys.dat", and the logger will pick the one named "default" to replace
the "console" and "file" that are in PyBitmessage otherwise
Example file for logging to syslog:
[loggers]
keys = root,syslog
[logger_root]
level=NOTSET
handlers=syslog
[logger_syslog]
level=DEBUG
handlers=syslog
qualname=default
[handlers]
keys = syslog
[handler_syslog]
class = handlers.SysLogHandler
formatter = syslog
level = DEBUG
args=(('localhost', handlers.SYSLOG_UDP_PORT),
handlers.SysLogHandler.LOG_LOCAL7)
[formatters]
keys = syslog
[formatter_syslog]
format=%(asctime)s %(threadName)s %(filename)s@%(lineno)d %(message)s
datefmt=%b %d %H:%M:%S
2016-05-02 15:00:21 +02:00
Denilson M. Amorim
28f46cb8b3
Dont run twice if daemon too
2016-05-02 15:00:21 +02:00
Denilson M. Amorim
cf610080b9
Squash: Single instance and pop up old instance
2016-05-02 15:00:21 +02:00
mailchuck
46d647460f
Version bump
...
We have 0.5.3 now
2016-05-02 15:00:21 +02:00
mailchuck
2fd85bfa69
SSL workaround
...
Python < 2.7.9 does not support anonymous SSL server through
ssl.wrap_socket, so we have to disable it. Works fine as client.
Try to prefer secp256k1 curve (again, requires python >= 2.7.9)
2016-05-02 15:00:21 +02:00
mailchuck
049e226ddc
Move saving UI state
...
quit is more appropriate than close event, but it my resurrect the issue
with linux saving config data.
2016-05-02 15:00:21 +02:00
mailchuck
5cb02dc783
Improve blacklist autolabel
2016-05-02 15:00:21 +02:00
mailchuck
1db7635893
OSX build fixes
...
- include bitmsghash so that it bundles the C library PoW
- include sslkeys so that SSL works in the bundle
- PyBitmessage version now propagated from the shell build script
2016-05-02 15:00:21 +02:00
mailchuck
a02ea14233
Blacklist through context menu
...
Fixes #101
2016-05-02 15:00:21 +02:00
mailchuck
c7fb9e6a43
SSL fixes
...
- uses constants for service flags
- requires SSL to use TLSv1 version (protection against POODLE-style
attacks)
- retry if sock.recv incomplete
2016-05-02 15:00:21 +02:00
mailchuck
2f874e41be
Fix adding/editing entries in addresbook
...
It didn't sort correctly and didn't update the label correctly when
changed.
Fixes #95
2016-05-02 15:00:21 +02:00
mailchuck
c804f6c181
Opportunistic encryption with TLS (2 of 2)
...
These are dummy key and certificates. They are loaded but otherwise not
used. This is a workaround against python's ssl_wrap deficiency, it
won't allow to execute a server-side SSL handshake without a loaded key
+ cert. Since generating key/cert locally would require additional
libraries, I opted for including a dummy one in the source.
2016-05-02 15:00:20 +02:00
mailchuck
53b0d2749b
Opportunistic encryption with TLS (1 of 2)
...
Fixes Bitmessage#264
Fixes Bitmessage#648
2016-05-02 15:00:20 +02:00
mailchuck
25cc1dc287
Unified code for finding source code location
...
It is already used in 3 places so I put it into a function
2016-05-02 15:00:20 +02:00
mailchuck
ceda22ec94
Private IP range update
...
Addresses Bitmessage#768
2016-05-02 15:00:20 +02:00
mailchuck
f68627158d
Click on inactive tab
...
Would cause exception.
2016-05-02 15:00:20 +02:00
mailchuck
0e15b246af
Fix broadcast
...
Any normal address should be able to broadcast. Reported over BM in one
of the chans.
2016-05-02 15:00:20 +02:00
mailchuck
10474b3561
Fix sync status sum
...
Last commit was broken.
2016-05-02 15:00:20 +02:00
mailchuck
79e199b45a
Show sync status in Network tab
...
Addresses Bitmessage#745 (but no API exposure yet)
2016-05-02 15:00:20 +02:00
mailchuck
5b724f366e
Prepare for tree widgets to store settings
...
Precursor for #12
2016-05-02 15:00:20 +02:00
mailchuck
4b88922104
Translation directory for OSX bundles
...
Addresses bitmessage#514
2016-05-02 15:00:20 +02:00
mailchuck
8f5d177690
Enabling/disabling color propagation
...
Fixes #105
2016-05-02 15:00:20 +02:00
mailchuck
a85e9ed20e
Default message font
...
Fixes #106 and Bitmesage#248
2016-05-02 15:00:20 +02:00
mailchuck
2947462d45
Unregistering of unregeistered accounts
...
Since it's unregistered, we don't know where to unregister from.
Fixes #91 .
2016-05-02 15:00:20 +02:00
Henrik Olsson
57575d0a39
Fix some typos
...
Author: Henrik Olsson <henrik@fixme.se>
2016-05-02 15:00:20 +02:00
mailchuck
1a842730a2
Newly sent messages and status update
...
- newly sent messages did not appear in all tabs
- message status change didn't work in all tabs
- addresses #90
- however, still new sent message sender/recipient do not have the
correct color
2016-05-02 15:00:20 +02:00
mailchuck
4aaf0048c6
Disabled folder color
...
Fixes #92
2016-05-02 15:00:20 +02:00
mailchuck
2783a1c1e5
Autofold/unfold when enabling/disabling
...
Fixes #93
2016-05-02 15:00:20 +02:00
mailchuck
d9401c7180
several bugfixes for rerendertabtree
...
It was prone to infinite loops, mixing elements etc.
2016-05-02 15:00:20 +02:00
mailchuck
8103874f6e
Allow deleting channels
...
Fixes #96
2016-05-02 15:00:20 +02:00
mailchuck
b74dc569ef
Disable "Special address behaviour" in chan
...
Fixes #97
2016-05-02 15:00:20 +02:00
mailchuck
e9a908aa83
Sqlite secure delete
...
Fixes #102
2016-05-02 15:00:20 +02:00
mailchuck
12878af41f
Fix Py2Exe / Py2App
...
Fixes the C PoW loading in frozen apps (Windows and OSX)
Cleaner fallback in PoW if something goes wrong
2016-05-02 15:00:20 +02:00
mailchuck
03f709b70d
Bump version
...
get ready for 0.5.2
2016-05-02 15:00:20 +02:00
mailchuck
2921b6553b
TTL/send splitter shouldn't save state
...
Because it also cannot be resized from the UI
2016-05-02 15:00:20 +02:00
mailchuck
83850536cf
Do not store search splitter state
...
It causes problems because it can't be resized through GUI.
2016-05-02 15:00:20 +02:00
mailchuck
3f96962e62
Actually enable saving states
...
It was temporarily disabled for testing resizing.
Addresses #12
2016-05-02 15:00:20 +02:00
mailchuck
d5743f12b9
More tabs resizable and save state
...
Fixes #15
Addresses #12
2016-05-02 15:00:20 +02:00
mailchuck
8e650396da
Missing library fix
...
Missing library error wasn't handled correctly.
2016-05-02 15:00:20 +02:00
mailchuck
0a8fdd7eff
Compile fixes
...
- OSX and Windows compile fixes
2016-05-02 15:00:20 +02:00
mailchuck
5a681068fe
OpenCL fixes
...
- directory change
- automatically detect all available GPUs
2016-05-02 15:00:20 +02:00
mailchuck
53ca944483
OSX fixes and default compile
...
It should built on OSX 10.11 now
It will build bitmsghash.so by default
2016-05-02 15:00:20 +02:00
mailchuck
961444a8ee
OpenCL compile warning
2016-05-02 15:00:20 +02:00
mailchuck
ad33e2640c
Move and rename OpenCL kernel
2016-05-02 15:00:20 +02:00
d5ec69d3b7
Bitmsghash linux compile fixes
2016-05-02 15:00:20 +02:00
0a09d3580d
Make building bitmsghash default
2016-05-02 15:00:20 +02:00
mailchuck
1a3794f3e3
C PoW updates
...
- move to subdirectory
- get rid of compile warnings on windows
- get number of threads from affinity (Windows, Linux) or core count
(BSD/OSX)
2016-05-02 15:00:20 +02:00
84c9b1dd31
C PoW library makefile
...
For easy compiling with GNU make (e.g. Unix-like systems).
Run as "make bitmsghash.so"
2016-05-02 15:00:20 +02:00
2869822134
C PoW updates
...
Catching up with Grant Olson's fork.
Reduce thread priority.
2016-05-02 15:00:20 +02:00
mailchuck
be55af1832
C library for bitmessage PoW
...
Originally from https://github.com/bm-robertwhite/bitmessage-powfaster .
Modified to compile correctly on Visual Studio, and to decrease thread
priority.
I have not tried it on Linux yet.
2016-05-02 15:00:20 +02:00
mailchuck
e5ee7426eb
Support for PoW from an external library
...
This will attempt to include a PoW library (.so on Unix, .dll on
windows) to do PoW. This is done in a safe way and clean fallback to
normal PoW. The code for the library will be in another commit. The code
is take from https://github.com/bm-robertwhite/bitmessage-powfaster ,
with minor modifications.
This patch also includes code to make GPU PoW have a safer fallback.
2016-05-02 15:00:20 +02:00
mailchuck
df3c662832
Message status update
...
Someone reported the exception via BM. Fixes #90
Signed-off-by: mailchuck <dev@mailchuck.com>
2016-05-02 15:00:20 +02:00
mailchuck
f5f46dae45
Version bump
2016-05-02 15:00:20 +02:00
mailchuck
8eb1b7462a
notify of new message fixed
...
Will notify even if not on active messagelist.
2016-05-02 15:00:20 +02:00
mailchuck
abc2ea2427
Wrong messagelist
2016-05-02 15:00:20 +02:00
mailchuck
0f1d85ff89
Unread count fixes
2016-05-02 15:00:20 +02:00
mailchuck
e84efecb67
getCurrentFolder should return None on unavailable
...
I think None is better than False.
2016-05-02 15:00:20 +02:00
mailchuck
aafa7b2840
Deleting from sent fix
...
Fixes #52
2016-05-02 15:00:20 +02:00
mailchuck
33928f1bc7
Trash undelete
...
Fixes #55
2016-05-02 15:00:20 +02:00
mailchuck
657eeeb1ca
Clear message lists better
...
Fixes #71
2016-05-02 15:00:20 +02:00
mailchuck
d78629a6cf
Emptying trash updates
...
Fixes #75 , however it is quite slow
2016-05-02 15:00:20 +02:00
mailchuck
6a95eba8f3
Unread count for trash
...
MarkUnread assumed all folders are inbox.
2016-05-02 15:00:20 +02:00
mailchuck
b4c920316e
Enable/disable dynamic behaviour
...
Fixes #88
2016-05-02 15:00:20 +02:00
mailchuck
81e8ee1f83
Color fixes in messagelists
...
Fixes #87
2016-05-02 15:00:20 +02:00
mailchuck
ad63e956cf
accountBrush improvements
...
Moved code into the method
2016-05-02 15:00:19 +02:00
mailchuck
828bf64630
Address book better context menu
...
Don't allow delete of chans/subscriptions.
Fixes #82
2016-05-02 15:00:19 +02:00
mailchuck
feea1ccd8d
Colors for From ComboBox
...
Fixes #86
2016-05-02 15:00:19 +02:00
mailchuck
0eb89d8af5
Subscription new messages display correctly
...
Fixes #70
2016-05-02 15:00:19 +02:00
mailchuck
4c8223ae88
Unread count performance optimisation
...
Continuation of #63
2016-05-02 15:00:19 +02:00
mailchuck
2adfa6a178
Ubuntu notification fixes
...
Notification should work irrespective of whether the new message shows
up in the messagelist.
2016-05-02 15:00:19 +02:00
mailchuck
1174fb394a
Indicate message sending
...
Fixes #83
2016-05-02 15:00:19 +02:00
mailchuck
6123b27315
removeInboxRowByMsgid fixes
...
Now undertands messagelists and has better performance.
Haven't tested it yet though because it's triggered through API.
I think it fixes #85
2016-05-02 15:00:19 +02:00
mailchuck
7478440bd6
Update unread count more efficiently
...
Fixes #63 . There are still some situations which can be improved but it
appears good enough.
2016-05-02 15:00:19 +02:00
mailchuck
9abc937cb3
More unified colors in foldertree and messagelists
...
Some parts still not colored in a unified way.
Fixes #84
2016-05-02 15:00:19 +02:00
mailchuck
6383f48ef2
Show tooltips on addressbook
...
Fixes #68
2016-05-02 15:00:19 +02:00
mailchuck
63431556be
Make subscription/chan labels editable
...
Fixes #67
2016-05-02 15:00:19 +02:00
mailchuck
77382a2424
Refactoring foldertree
...
Colors consistent
Sorting more consistent
Deduplication of methods
Context menu enable/disable affects tree
Fixes #73
2016-05-02 15:00:19 +02:00
mailchuck
1c4015d359
Spanish wrongly spelled
...
Fixes #74
2016-05-02 15:00:19 +02:00
mailchuck
4522ea46d3
Sent in chans and subscriptions columns
...
Now it shows "from" instead of "to" column when selecting sent folder in
subscriptions or chans.
Fixes #53
2016-05-02 15:00:19 +02:00
mailchuck
2cc7506619
Addressbook contains chans, subscriptions and is sorted
...
Fixes #5
2016-05-02 15:00:19 +02:00
mailchuck
39dc34b158
Sent folder for chans and subscriptions
...
Fixes #53
2016-05-02 15:00:19 +02:00
mailchuck
1d86f7a699
Put mailing lists behind normal accounts
...
Fixes #58
2016-05-02 15:00:19 +02:00
mailchuck
f6bd312dc5
New message in correct tab
...
Newly arriving messages now appear in the correct tab. Previously it
assumed it was always "Messages" tab. Partially addresses #3 .
2016-05-02 15:00:19 +02:00
mailchuck
55b69f2e8b
Fix keypress in chan and subscription messagelists
...
Fixes #65
2016-05-02 15:00:19 +02:00
mailchuck
ab113745bd
Remove expletive
...
That wasn't necessary.
2016-05-02 15:00:19 +02:00
mailchuck
2ec04ede40
Passive version check
...
Bitmessage will now notify you if it encounters someone with a newer
version. Takes into account that it should not recommend switching from
stable to unstable and vice versa. Also, temporarily treats 0.5 as a
mailchuck fork.
Fixes #43
2016-05-02 15:00:19 +02:00
mailchuck
3ffea81d02
No more Mailchuck Pybitmessage 2nd
...
Last commit only changed loading, this also saving.
2016-05-02 15:00:19 +02:00
mailchuck
f47d28bb59
There will not be a Mailchuck PyBitmessage anymore
...
Since I'm merging my fork into normal pybitmessage, there won't be
separate configs.
2016-05-02 15:00:19 +02:00
mailchuck
7625b4f101
Version bump
...
Just for development
2016-05-02 15:00:19 +02:00
mailchuck
3566b82c9f
Special address behaviour updates send comboboxes
...
Fixes #57
2016-05-02 15:00:19 +02:00
mailchuck
705ffacd8b
Changing label updates SendFrom combobox
...
Fixes #2
2016-05-02 15:00:19 +02:00
mailchuck
d51431b1dc
Account listing and sorting
...
- account listing and sorting has now a common function to reuse
- combobox send from is now sorted, Fixes #59
2016-05-02 15:00:19 +02:00
mailchuck
afeadcf8d2
Switch to tab you're replying from
...
Fixes #64
2016-05-02 15:00:19 +02:00
mailchuck
059f113d95
Account labels become editable again
...
Fixes #60
2016-05-02 15:00:19 +02:00
mailchuck
5ac17e456d
Fix reply unicode subject
...
Fixes #62
2016-05-02 15:00:19 +02:00
mailchuck
343b3532c5
Show subscription unread count
...
Subscriptions were not showing unread count. This commit implements it.
2016-05-02 15:00:19 +02:00
mailchuck
c83255d4d4
Bump up version
2016-05-02 15:00:19 +02:00
mailchuck
7998d77b9c
Broadcast sending from was wrong
...
Fixes #51
2016-05-02 15:00:19 +02:00
mailchuck
5b12f2dffa
Chan and subscription trash
...
Fixes #6
2016-05-02 15:00:19 +02:00
mailchuck
faeaad212d
Replies to mailing lists
...
Attempt to fix #49 . Will close after positive feedback.
2016-05-02 15:00:19 +02:00
mailchuck
bf9bdaadc5
Fix reply-to subscriptions and labels
...
Closes #1
Also attempts to solve #49 but needs testing.
2016-05-02 15:00:19 +02:00
mailchuck
23207749d1
Constant in a separate file
...
str_broadcast_subscribers should not be specific to the main UI class
2016-05-02 15:00:19 +02:00
mailchuck
9d2e114712
Add BroadcastAccount class
...
This will help to distinguish between general broadcasts and
subscriptions.
2016-05-02 15:00:18 +02:00
mailchuck
3911525d75
Remember main window geometry and state on exit
...
Main window geometry and state is saved on exit and restored on load.
Uses default QSettings in python.
2016-05-02 15:00:18 +02:00
mailchuck
b776eb7f36
Formatting change
...
Was not folding properly in editor, made it more python-like
2016-05-02 15:00:18 +02:00
mailchuck
001ec14d72
Messages tab resizable
...
- the separator between folder tree and message list is now resizable
- the separator between list of messages and message content is
resizable
- only for message tab, chans, subscriptions and others are still not
resizable
2016-05-02 15:00:18 +02:00
mailchuck
4db1a5ea48
Subscriptions
...
Initial subscription fix. Still does not always display the list from
the correct folder, and it currently does not update unread count on
subscriptions.
2016-05-02 15:00:18 +02:00
mailchuck
59a562228d
Fix
...
Typo
2016-05-02 15:00:18 +02:00
mailchuck
e10b9cbff4
Resizable fields
...
Inbox folder/message now resizable
2016-05-02 15:00:18 +02:00
mailchuck
321bf9a6c9
Chan UI fix
...
Minor chan UI fix. Still not completely smooth but mostly working.
2016-05-02 15:00:18 +02:00
mailchuck
552876e43e
Gateway register/unregister changes
...
- do not register/unregister channels or mailing lists
- send registration/unregistration request irrespective of whether the
client thinks it's registered or not. We don't know for sure it knows it
correctly so don't assume that, it may confuse users
2016-05-02 15:00:18 +02:00
mailchuck
5525176216
Chan updates
...
- chans now work with the new interface, still some bugs present
- chans do not have a sent folder anymore (you'll see sent messages in
the sent folder of the account you're sending it from)
2016-05-02 15:00:18 +02:00
mailchuck
b8baceb629
Fix: recurse prevention
...
In case something screws up, prevent recursive changes through
treeWidgetItemChagned
2016-05-02 15:00:18 +02:00
mailchuck
1cab8bf549
Fix: gateway registration updates label
...
When registering on a gateway, the label change will be displayed
immediately.
2016-05-02 15:00:18 +02:00
mailchuck
ccae351e65
Fix: do not update account name from folder name
...
Last commit caused changes in unread count of folder to change the
account name. This is now fixed.
2016-05-02 15:00:18 +02:00
mailchuck
80afc489d8
Editable address labels
...
Address labels can be edited now (F2 or double click)
2016-05-02 15:00:18 +02:00
mailchuck
2bc9c7ff4c
Email gateway integration
...
Sending/receiving from the send tab, reply from inbox and
registration/unregistration context menu.
2016-05-02 15:00:18 +02:00
mailchuck
b4fa5d4abf
Gateway update and sort fix
...
- shows gateway parser results more accurately
- gateway class assigned dynamically
- inbox sort order is aware of what you click on and defaults to
ascending
2016-05-02 15:00:18 +02:00
mailchuck
033be9b5bf
Email Gateway UI implementation
...
First steps, only a tiny part works
2016-05-02 15:00:18 +02:00
mailchuck
83109796fe
Address Tree updates
...
The Address tree now is sorted and updates when number of unread
messages changes.
2016-05-02 15:00:18 +02:00
mailchuck
83a069d1f6
Migration Wizard
...
- Not fully working yet
- show this wizard and connection confirmation dialog before showing the
main window, and don't open main window until these two have finished or
were canceled
2016-05-02 15:00:18 +02:00
mailchuck
3a294ac672
Fixes
...
Some pages were initialised with incorrect number of parameters.
2016-05-02 15:00:18 +02:00
mailchuck
9075f3f5e6
OpenCL Fixes
...
Still not fully working and hardcoded device number
2016-05-02 15:00:18 +02:00
mailchuck
8043f1ae60
Address tree order sort case insensitive
2016-05-02 15:00:18 +02:00
mailchuck
fd7ed893a7
Collapse disabled accounts
2016-05-02 15:00:18 +02:00
mailchuck
a961ad1d84
Formatting
2016-05-02 15:00:18 +02:00
mailchuck
9ab9984283
Order reverse
...
Disabled addresses should go at the end, not at the beginning.
2016-05-02 15:00:18 +02:00
mailchuck
cae03d66df
Typo fix
2016-05-02 15:00:18 +02:00
mailchuck
f2e9b3467f
Address tree sorting
...
Sorts addresses in the address tree
2016-05-02 15:00:18 +02:00
mailchuck
8882912bf3
New address wizard
...
Not working yet, just UI
2016-05-02 15:00:18 +02:00
mailchuck
324dbfb81a
Migration Wizard
...
- from standard PyBitmessage to this one
- not working yet
2016-05-02 15:00:18 +02:00
mailchuck
9a6db480bd
Typo
2016-05-02 15:00:18 +02:00
mailchuck
b4fad5c49a
Shorten trashed summary
...
Trash UI now exists, there is no need to tell the user it doesn't.
2016-05-02 15:00:18 +02:00
mailchuck
3888eb11be
UI fix
...
All new messages appeared in current account message list, as opposed to
only new messages associated with that account.
2016-05-02 15:00:18 +02:00
mailchuck
2b1222f970
Fix: UI
2016-05-02 15:00:18 +02:00
Peter Surda
bde5bfc42e
Add: re-merge API changes
...
API handler was rewritten in upstream, previous merge
overwrote the changse. This re-enables them.
2016-05-02 15:00:17 +02:00
Peter Surda
d3345e051a
Add: debugging for freezing api call
2016-05-02 15:00:17 +02:00
lightrabbit
f0f9f679e6
Add UPnP support.
2016-05-02 15:00:17 +02:00
Peter Surda
bd7c3e6e01
Reverted the code that tried to randomise starting PoW position.
...
The problem wasn't caused by the starting position but by an int
being interpreted as a string. Fixed in upstream and merged.
2016-05-02 15:00:17 +02:00
Peter Surda
69309b82fb
Minor changes in cli, PoW, and a couple of new api calls.
2016-05-02 15:00:17 +02:00
sbkaf
800fd2a143
finished implementing more email client like interface
2016-05-02 15:00:17 +02:00
sbkaf
f6f68dc975
start changing QTreeWiget
2016-05-02 15:00:17 +02:00
sbkaf
4763fb1238
merge
2016-05-02 15:00:17 +02:00
sbkaf
585873e4f3
interface
2016-05-02 15:00:17 +02:00
sbkaf
44414c2e88
make interface look more like an e-mail programm, not yet functional
2016-05-02 15:00:17 +02:00
8198e1922a
Added a CLI interface to the daemon from
...
https://github.com/Dokument/PyBitmessage-Daemon/raw/master/daemon.py
2016-05-02 15:00:17 +02:00
1796c20887
Merge OpenCL code and make OpenCL auto-detectable
2016-05-02 15:00:17 +02:00
Jonathan Warren
72ea076099
Merge pull request #807 from Erkan-Yilmaz/patch-2
...
typo
2015-07-28 11:44:37 -04:00
Erkan Yilmaz
0fe6562440
typo
2015-07-28 07:19:47 +02:00
Erkan Yilmaz
de67b9f0c6
typo (missing char: n)
2015-07-25 12:54:33 +02:00
Jonathan Warren
4403cde52b
Fix issue #804
2015-07-15 11:56:24 -04:00
Jonathan Warren
f84d848e06
Merge branch 'master' of github.com:Bitmessage/PyBitmessage
2015-07-15 11:34:23 -04:00
Jonathan Warren
37e8d01c29
Merge pull request #790 from timothyparez/development
...
Refactored the code in api.py
2015-07-01 15:49:36 -04:00
Jonathan Warren
b50797d5b8
Merge pull request #789 from Erkan-Yilmaz/patch-2
...
two typos
2015-07-01 15:37:21 -04:00
Jonathan Warren
18df8e9561
Merge pull request #788 from Erkan-Yilmaz/patch-1
...
typo
2015-07-01 15:36:41 -04:00
Jonathan Warren
05182e7465
Make data send rate more accurate
2015-07-01 15:26:23 -04:00
Jonathan Warren
6ebf8666dc
support SHA256 signatures
2015-03-27 15:25:32 -04:00
Timothy
2dfce7f5e7
Refactored the code in api.py by extracting the handler code for each request to separate methods
...
This should result in code that is easier to understand, modify and maintain
2015-03-21 19:53:09 +08:00
Timothy
08f2c3bfc0
Revert "Refactored the code in api.py by extracting the handler code for each request to separate methods"
...
This reverts commit 2ebf716941
2015-03-21 19:50:04 +08:00
Timothy
2ebf716941
Refactored the code in api.py by extracting the handler code for each request to separate methods
...
This should result in code that is easier to understand, modify and maintain
2015-03-21 19:45:56 +08:00
Jonathan Warren
ba27f6e8a6
Made error message for Raspberry Pi users less serious-sounding
2015-03-19 18:09:04 -04:00
Erkan Yilmaz
8473703bfc
two typos
2015-03-17 22:38:58 +01:00
Erkan Yilmaz
f0c207e6b7
typo
2015-03-17 22:34:54 +01:00
Jonathan Warren
4622d952e4
update list of defaultKnownNodes
2015-03-09 22:33:46 -04:00
Jonathan Warren
ce9480ab57
forgot a question mark character in a sql query
2015-03-09 02:42:28 -04:00
Jonathan Warren
cc712cb8ff
finished work on specifyTTL
2015-03-09 02:35:32 -04:00
Jonathan Warren
9044e84093
some specifyTTL work completed
2015-03-03 14:04:12 -05:00
Jonathan Warren
3d82652d15
Merge pull request #782 from felidosz/master
...
german translation and tray icon
2015-02-27 14:52:09 -05:00
Jonathan Warren
95bcce1d0c
Merge pull request #760 from themighty1/minimize-to-tray-linux
...
fix minimize-to-tray linux
2015-02-21 21:16:20 -05:00
Jonathan Warren
d82eb8b11f
Merge pull request #766 from fanquake/use-https-link-in-help
...
Use https link in help message dialog
2015-02-21 20:23:30 -05:00
sbkaf
e6179fb953
minimize on tray icon click: enabled for linux (if removed)
2015-02-21 14:24:17 +01:00
sbkaf
a68a211d5c
german translation
2015-02-21 14:21:11 +01:00
Jonathan Warren
95c939a2a0
Fix #748 - Check hash of sig instead of message contents
2015-02-20 21:03:20 -05:00
Jonathan Warren
3527983fa6
Minor refactoring
2015-02-20 17:33:17 -05:00
Jonathan Warren
642c5858f4
handle OpenSSL.EC_KEY_get0_group() exception
2015-02-06 16:31:23 -05:00
Jonathan Warren
d0676233ed
Merge pull request #771 from Atheros1/master
...
Various fixes
2015-01-28 15:07:41 -05:00
Jonathan Warren
0c7330f900
fix misbehaving logger.warning line
2015-01-28 14:45:29 -05:00
Jonathan Warren
bd9286ef41
msg objects now contain an objectVersion
2015-01-28 14:14:28 -05:00
Jonathan Warren
5b87bc26ec
Fix #758
2015-01-21 12:38:25 -05:00
Michael Ford
e425c6d927
Use https link in help message dialog
2015-01-14 22:45:02 +08:00
Jonathan Warren
d16077b109
Merge pull request #762 from Atheros1/master
...
Fix #761
2015-01-08 17:12:52 -05:00
Jonathan Warren
630654da16
Fix #761
2015-01-08 17:11:30 -05:00
Jonathan Warren
f7c2aa0e4a
Improve default text seen after changing UI language
2015-01-08 17:08:35 -05:00
Andrew Lott
f645dad56c
Update bitmessage_nl.ts
...
added some unfinished tranlations
2015-01-08 00:33:04 +00:00
themighty1
c379978f3e
fix minimize-to-tray linux
2015-01-07 01:57:20 +03:00
digital dreamer
c1784bb533
Retranslate context menus after language switch
2014-12-28 11:42:38 +01:00
Jonathan Warren
0c0e0e527b
Merge pull request #753 from Atheros1/master
...
Czech translation
2014-12-25 23:25:54 -05:00
Jonathan Warren
8b95ad1659
updated settings.ui file for Czech translation
2014-12-25 23:24:09 -05:00
Jonathan Warren
e4cbf6f4a4
Merge branch 'czech' of https://github.com/digital-dreamer/PyBitmessage into digital-dreamer-czech
2014-12-25 23:14:54 -05:00
Jonathan Warren
7a203fe803
Merge pull request #740 from noffle/blacklist_api
...
Blacklist API
2014-12-25 22:12:42 -05:00
Jonathan Warren
4aded87837
Merge pull request #736 from digital-dreamer/translate-without-restart
...
Change interface language without restart
2014-12-25 21:35:22 -05:00
Jonathan Warren
2621f38b11
Merge pull request #735 from themighty1/ui-freeze-fix
...
dont freeze UI when mass-marking unread
2014-12-25 21:23:49 -05:00
Jonathan Warren
b79953d889
Merge pull request #731 from fanquake/remove_semicolon
...
Remove trailing semicolon in __init__.py
2014-12-25 21:16:36 -05:00
Jonathan Warren
9b6bc26144
fix bug in #715
2014-12-25 21:06:10 -05:00
Jonathan Warren
50c392c197
resolve merge conflict
2014-12-25 20:37:04 -05:00
bmng-dev
29e75ac7c6
Update the required Python version to 2.7.3
2014-12-25 19:48:07 -05:00
bmng-dev
23b55652b9
New depends module to check dependencies. Moved version check to new depends module.
2014-12-25 19:48:05 -05:00
Jonathan Warren
3ef83c2f95
Leftover change from clearing ProtoV2 code: increment settings version from 7 to 8
2014-12-25 19:23:16 -05:00
Jonathan Warren
e898b40203
Removed obsolete Protocol v2 code
2014-12-25 04:06:57 -05:00
digital dreamer
345303a560
Add Czech translation
2014-11-30 15:13:48 +01:00
Stephen Whitmore
e93d23d2e0
Adds new API error codes for black-/white-list manipulation.
...
Refactors loadBlackWhiteList into more generic rerenderBlackWhiteList
2014-11-22 13:56:41 -08:00
Stephen Whitmore
afb21ca307
Adds API commands for blacklist manipulation.
2014-11-22 13:13:35 -08:00
digital dreamer
011099b5db
Change interface language without restart
2014-11-14 12:21:18 +01:00
Jonathan Warren
b02a5d3109
Merge pull request #734 from Atheros1/master
...
acknowledgement EOL time: 2.5 days
2014-11-13 16:41:08 -05:00
Jonathan Warren
38b861033d
acknowledgement EOL time: 2.5 days
2014-11-13 16:32:31 -05:00
digital dreamer
80fa32de41
Fix #417 - bad relative path breaks translations
2014-11-12 11:31:15 +01:00
Michael Ford
9ca1f87d79
Remove trailing semicolon in __init__.py
2014-10-24 10:39:34 +08:00
themighty1
88efb92c15
dont freeze UI when mass-marking unread
2014-10-20 18:46:56 +03:00
Jonathan Warren
713ed89467
Bugfix: infinite loop if our max acceptable difficulty is too low
2014-10-15 17:16:27 -04:00
Jonathan Warren
fdb0d1e776
Merge branch 'master' into ProtoV3
2014-10-14 14:28:26 -04:00
Jonathan Warren
61653bdc0d
Revert "Catch the standard Unix SIGTERM kill signal and do a graceful shutdown"
2014-10-14 14:25:13 -04:00
Jonathan Warren
e096c37f7e
save debug.log in correct directory
2014-10-13 01:59:16 -04:00
Jonathan Warren
b6e0396333
resolve minor merge conflict with master
2014-10-12 23:33:09 -04:00
Jonathan Warren
6e9f6d54d2
Merge pull request #709 from JonathanCoe/master
...
Catch the standard Unix SIGTERM kill signal and do a graceful shutdown
2014-10-12 23:31:01 -04:00
Jonathan Warren
bcb05419db
updated defaultKnownNodes
2014-10-12 23:22:21 -04:00
Jonathan Warren
a480fd4f3d
After upgrade period, also support old v2 addresses
2014-10-01 19:55:23 -04:00
Yuri
5beaeff2e2
TImestamped the keys.dat backup file.
2014-09-16 10:04:56 -07:00
Yuri
d3c91eea3b
Added backup copy creation during keys.dat write to prevent an accidental file loss due to the disk failure.
2014-09-14 23:53:21 -07:00
Yuri
34824c044e
Moved all keys.dat writing code into writeKeysFile in shared.py
2014-09-14 23:34:33 -07:00
Jonathan Warren
0865e863ec
Added ability to limit network transfer rate
2014-09-10 16:47:51 -04:00
Michael Ford
6273ec6444
Increment version number to 0.4.3
2014-09-05 11:48:59 +08:00
Jonathan Warren
c84cdecba4
Normalize the noncetrialsperbyte and payloadlengthextrabytes for each of the user's existing addresses
2014-09-02 19:25:03 -04:00
Benoît HERVIER
388bc6ba04
#708 : Use default locale encoding
...
Use locale endoding else this generate error in GU : as default time format can have non ascii char on non english locale, but using ascii in locale can generate UnicodeDecodeError: 'ascii' codec can't decode byte 0xc3 :
In PyBitmessage/src/bitmessageqt/__init__.py"
l10n.formatTimestamp())
In PyBitmessage/src/l10n.py", line 81, in formatTimestamp
return unicode(timestring, encoding)
2014-08-28 13:39:40 +02:00
Jonathan Warren
90800af729
very minor improvements to ProtoV3
2014-08-27 19:17:47 -04:00
Jonathan Warren
c306062282
Bitmessage Protocol Version Three
2014-08-27 03:14:32 -04:00
JonathanCoe
3b42805efc
Catch the standard Unix SIGTERM kill signal and do a graceful shutdown of PyBitmessage.
...
We already do this for the SIGINT kill signal. The change allows us to do a clean
shutdown of PyBitmessage when its process has been separated from the terminal.
2014-08-26 13:55:42 +02:00
bmng-dev
33800064c7
Update l10n to ensure decoding actually works
...
Fix for encoding issue in #706
2014-08-16 04:23:30 +00:00
bmng-dev
0a2fb54f78
Fix l10n.formatTimestamp so it accepts strings
2014-08-08 04:38:23 +00:00
bmng-dev
0d2c94f060
Fix l10n so getTranslationLanguage always returns a string
2014-08-08 01:34:57 +00:00
Jonathan Warren
e58ac560de
Merge pull request #701 from bmng-dev/Issue-#691
...
Fixes issue #691
2014-08-06 17:25:40 -04:00
Jonathan Warren
ea6f34ade6
removed use of memoryview so that we can support python 2.7.3
2014-08-06 15:54:59 -04:00
bmng-dev
269506ff8f
New localization module (l10n)
...
Resolves #691
2014-08-06 02:01:01 +00:00
Jonathan Warren
d2f988e7ac
Merge pull request #700 from Atheros1/master
...
increment version number to 0.4.3
2014-08-04 18:37:53 -04:00
Jonathan Warren
807f2fee8a
increment version number to 0.4.3
2014-08-04 18:35:26 -04:00
Jonathan Warren
51d73f0eba
Merge pull request #694 from antius/master
...
Change decodeBase58
2014-08-01 17:41:10 -04:00
Jonathan Warren
9e16e81283
resolve merge conflict and show transfer rate
2014-08-01 17:25:47 -04:00
Jonathan Warren
0820578452
Merge pull request #696 from bmng-dev/Issue-#689
...
Improve version check.
2014-07-29 13:57:48 -04:00
Jonathan Warren
fbfbbf68b5
support pyelliptic's updated HMAC algorithm
2014-07-29 03:35:23 -04:00
bmng-dev
4430ed0cb5
Improve version check
...
Move version check so it is the very first thing we do.
Perform version check for all platforms
Ensure backwards and forwards compatibility
2014-07-29 06:51:59 +00:00
The Antius
6a68a0c8b6
Change decodeBase58
2014-07-27 03:31:45 +02:00
Jonathan Warren
b41fb616ae
ignore duplicate messages
2014-07-26 13:15:28 -04:00
Ruben de Vries
c8bf3ccc63
moved the check for PyQt so that we don't need to install it when running -c
2014-07-15 17:32:00 +02:00
Jonathan Warren
82fd241450
Merge pull request #681 from sandakersmann/patch-1
...
Bug fix for bitmessage_no.ts
2014-07-14 19:46:20 -04:00
Jonathan Warren
ce62294975
Merge pull request #679 from enikesha/htmlfix
...
Fix unicode handling in 'View HTML code as formated text'. Fixes #667
2014-07-14 19:45:15 -04:00
Jonathan Warren
a2a7edc9be
resolve merge conflict
2014-07-14 19:29:47 -04:00
Jonathan Warren
254bac6b32
minor change to 'addDataPadding' commit
2014-07-14 14:15:38 -04:00
Jonathan Warren
f6bab3918c
Merge pull request #668 from antius/master
...
Make addDataPadding method to avoid clutter.
2014-07-14 14:12:07 -04:00
Jonathan Warren
e3124e1b2c
Merge pull request #666 from piluke/master
...
Add a curses terminal interface as an alternative to QT
2014-07-14 14:06:21 -04:00
Yuri
f05bcdb829
Made sent/received byte counts to be in human readable format.
2014-07-11 11:12:58 -07:00
Yuri
f107b0fbd9
Addition of bytes received/sent counts on the network information tab.
2014-07-07 13:30:23 -07:00
sandakersmann
bf7f58efd5
Bug fix for bitmessage_no.ts
...
Bug fix for bitmessage_no.ts ("nb" corrected to "no")
2014-06-10 07:59:37 +02:00
bmng-dev
be5ab22d16
Fix name error
2014-06-08 14:07:28 +00:00
bmng-dev
1f9991bcd0
Fix syntax error
2014-06-08 14:03:58 +00:00
Innocenty Enikeew
51b9a59719
Optimizations and better newlines handling
2014-06-03 09:45:59 +04:00
Innocenty Enikeew
c848d55462
Fix unicode handling in 'View HTML code as formated text'. Fixes #667
2014-06-02 21:10:18 +04:00
bmng-dev
97647f23a6
Refactor header generation
...
Modify generateFullAckMessage to use shared.CreatePacket
2014-05-22 16:33:42 +00:00
bmng-dev
1f75047223
Refactor generation of packet headers
2014-05-22 16:21:20 +00:00
bmng-dev
0f9625aac7
Refactor packet header extraction and generation
...
Demote payloadLength from class instance variable to processData local variable as no other function was using it
Improve processData:
-Utilise shared.Header
-Use a memoryview to reduce memory overhead
-Clean up variables before a recursive call
-Strip null bytes from command
Refactor sendData
Various functions:
-Use shared.CreatePacket to generate packets
Fix typo in _checkIPv4Address
2014-05-22 15:57:48 +00:00
bmng-dev
ccfbe8da47
Refactor handling of packet headers
...
Refactored ackDataHasAVaildHeader:
-shared.Header is used as necessary
-avoided slicing wherever possible
-remove trailing null characters when comparing command strings
-don't calculate the checksum of a large payload
2014-05-22 13:08:30 +00:00
bmng-dev
947f7655ab
Refactor generation of packet headers
...
Added global variable Header - a compiled Struct to pack/unpack headers so as to avoid repeatedly compiling the same format string
Add a new method CreatePacket to simply and efficiently construct a packet that is ready to be sent
Modify assembleVersionMessage to use CreatePacket
2014-05-22 12:30:51 +00:00
bmng-dev
9b40838f25
Use pointMult instead of arithmetic.privtopub
...
pointMult is faster than the pure python arithmetic.privtopub
Additionally in makeCryptor the call to a.privtopub could have just simply be changed to call the local privToPub but then privkey would have been dehexified twice (once in makeCryptor, then again in privToPub) and privToPub would have hexified its result only for makeCryptor to immediately dehexify it. This sort of unnecessary hexifying/dehexifying seems to occur throughout PyBitmessage.
2014-05-21 11:08:15 +00:00
bmng-dev
b1261a6c0e
Move pointMult to highlevelcrypto
...
Update pointMult calls to highlevelcrypto.pointMult
2014-05-21 10:15:07 +00:00
bmng-dev
19deff7c75
Move pointMult to highlevelcrypto
...
Remove pointMult from class_addressGenerator
Update pointMult calls to highlevelcrypto.pointMult
2014-05-21 10:06:20 +00:00
bmng-dev
ecf78801bf
Move pointMult function to highlevelcrypto
...
Copy pointMult function from class_addressGenerator.py to highlevelcrypto.py
2014-05-21 09:59:08 +00:00
Jonathan Warren
033370472e
Merge pull request #670 from Atheros1/master
...
Dutch translation
2014-05-19 16:04:32 -04:00
Jonathan Warren
b97a65391c
added dutch translation option to settings dialog
2014-05-19 16:01:46 -04:00
Jonathan Warren
8ed4ba8670
Merge branch 'master' of git://github.com/lazlolazlolazlo/PyBitmessage into lazlolazlolazlo-master
2014-05-19 14:04:17 -04:00
antius
41ba921626
Simplify and optimize
2014-05-02 18:47:50 +02:00
antius
53a3d1635a
Make addDataPadding method to avoid clutter.
2014-05-02 16:46:36 +02:00
Luke Montalvo
cc5301327c
* A few minor changes including accidentally unappended code
...
* Fix sending as a chan address
2014-04-30 21:00:02 -05:00
Luke Montalvo
276b8d3125
Merge branch 'master' of https://github.com/Bitmessage/PyBitmessage
2014-04-30 19:09:29 -05:00
Luke Montalvo
d4327cef81
+ Add text wrapping to message viewer
...
* Move global variable declaration to prevent warnings
* Fix Address Book and Subscriptions entry prepending
* Fix shared.fixPotentiallyInvalidUTF8Data() corrupting sent subjects and message bodies
2014-04-30 19:03:12 -05:00
Jonathan Warren
84bd40bd57
Merge pull request #642 from fyahfox/master
...
Update bitmessage_de.ts
2014-04-30 18:51:34 -04:00
Jonathan Warren
a49ab786bb
resolve merge conflict
2014-04-30 18:48:00 -04:00
Jonathan Warren
38d7db24ad
Merge pull request #639 from bpeel/wip/trusted-peer
...
Add a 'trustedpeer' option to keys.dat
2014-04-30 17:42:28 -04:00
Jonathan Warren
e2e79362af
Merge pull request #638 from IZARTeam/master
...
Add zh_cn translations in class_singleWorker.py
2014-04-30 16:51:58 -04:00
Jonathan Warren
a94d995f76
Merge pull request #633 from domob1812/email-quoting
...
Optionally reply below quote (email style)
2014-04-30 16:49:06 -04:00
Jonathan Warren
22934441dc
Fix #662 - 'PyBitmessage does not wait for verack'
2014-04-30 15:39:25 -04:00
Jonathan Warren
12d131f7f2
Fixed minor label problem during init
2014-04-30 12:44:16 -04:00
Luke Montalvo
196047b2ed
+ Add Sent, Subscription, and Blacklist tab functionality
...
+ Add code to delete address from Your Identities
+ Add code to load Sentbox, Subscriptions, and Blacklist
* Lengthen column width from 30 to 40 to better fit unlabeled addresses and long subject lines
* Fix row overflow support
* Reorder Dialog initialization to remove duplicate code
* Add reply argument to sendMessage()
* Add newline to Move to Trash message
* Replace Your Identities address copy option with an option to send a message
2014-04-29 21:45:41 -05:00
Luke Montalvo
c3feb54b7b
+ Add lists for each tab requiring a large table
...
+ Add function ascii() to strip non-ASCII characters
+ Add Inbox, Send, and Address Book tabs support
+ Add Home and End key handling to allow skipping to the top or bottom of tables
+ Add sendMessage() function so replies are easier and code is not duplicated
+ Add screen clear before initial draw in order to get rid of the default background color
* Fix resetlookups() by allowing access to global inventorydata
* Shorten resetlookups() Timer to 1 second
* Fix table display when output requires scrolling
* Change table column width from 50 to 30
- Remove conditional naptime by using blocking input with 1 second timeout
- Remove stderr capturing for development purposes
2014-04-29 00:10:33 -05:00
Luke Montalvo
01003fc56c
Merge branch 'master' of https://github.com/Bitmessage/PyBitmessage
2014-04-29 00:09:30 -05:00
Jonathan Warren
114ba4e23a
slightly modify IPv6 modifications so that IPv4-only hosts properly handle v6 IPs
2014-04-27 18:05:43 -04:00
Luke Montalvo
7d10d2aa2a
+ Fix CPU hogging by implementing tab-based refresh improvements
...
* Make tables more distinct with horizontal lines
- Remove start_color() because wrapper() does it anyway
2014-04-19 14:57:04 -05:00
Luke Montalvo
813f4c7ed9
+ Add dependency list
...
+ Add stderr capturing
+ Add identities and network status tabs
+ Add dialogs to configure identities
+ Add color pair definitions
+ Add the '-c' flag to use the curses interface
* Reorganize imports
* Switch logger to file_only mode when running with curses
2014-04-19 13:45:37 -05:00
Luke Montalvo
63c9f751a9
+ Add beginning code for an alternative curses interface
2014-04-18 00:48:42 -05:00
Daniel Kraft
eef2176bfa
Merge branch 'master' into email-quoting
2014-04-06 15:46:05 +02:00
Neil Roberts
7da6ea958f
Add support for IPv6
...
It will now listen on an IPv6 socket if possible or fall back to IPv4
if that doesn't work. It will no longer filter out all IPv6 addresses
and instead it will only filter out those that point to the local
network.
It looks like the DNS bootstrapping should just automatically work
because getaddrinfo already returns IPv6 addresses from the AAAA
record.
In order to convert from the ASCII representation of IPv6 addresses
and back we need inet_ntop and inet_pton. Python 2 doesn't currently
provide these for Windows so instead this patch provides a hot patch
to the socket module which wraps WSAStringToAddress and
WSAAddressToString using ctypes.
2014-03-12 01:48:48 +00:00
Jonathan Warren
700e3d1f17
Merge pull request #629 from yurivict/translations
...
Corrected Russian translations (e->ё, commas, spelling, formal style)
2014-03-04 18:03:40 -05:00
Lazlo Westerhof
7f01887365
Add dutch translation files
2014-02-27 13:17:21 +01:00
fyahfox
272364ce7b
Update bitmessage_de.ts
...
added some translations
typo
2014-02-09 14:22:28 +01:00
fyahfox
928d9501cc
Update bitmessage_de.ts
2014-02-08 18:41:33 +01:00
fyahfox
ff36037df9
Update bitmessage_de.ts
...
typo
2014-02-08 18:40:02 +01:00
fyahfox
fd6fd0719f
Update bitmessage_de.ts
...
typo line 1296
2014-02-08 17:46:17 +01:00
goldbook
cfb1c079c5
add language option
2014-02-08 12:02:19 +09:00
goldbook
61d4e0889f
complete translation to japanese
2014-02-08 11:35:51 +09:00
goldbook
a34442d637
add more translation.
2014-02-07 00:47:04 +09:00
Neil Roberts
03263156de
Add a 'trustedpeer' option to keys.dat
...
If this option is specified in keys.dat then Bitmessage will connect
to the host specified there instead of connecting to the hosts in the
list of known nodes. It will also stop listening for incoming
connections and the timing attack mitigation will be disabled.
The expected use case is for example where a user is running a daemon
on a dedicated machine in their local network and they occasionally
want to check for messages using a second instance of the client on
their laptop. In that case it would be much faster to catch up with
the messages by directly downloading from the dedicated machine over
the LAN. There is no need to connect to multiple peers or to do the
timing attack mitigation because the daemon is trusted.
The host is specified as hostname:port. Eg, ‘192.168.1.8:8444’.
2014-02-06 13:16:07 +00:00
IZARTeam
1204442fcd
Add zh_cn translations in class_singleWorker.py
...
And fix some mistakes in Chinese translation
2014-02-06 03:31:51 +08:00
Jonathan Warren
44f31d7bf9
Merge pull request #637 from Atheros1/master
...
Ignore, and don't save to memory, messages larger than 20MB (temporary)
2014-02-04 23:47:59 -08:00
Jonathan Warren
0de659a04a
Ignore, and don't save to memory, messages larger than 20MB (temporary)
2014-02-05 02:45:10 -05:00
goldbook
e63276c240
add japanese transration.
2014-02-01 17:15:50 +09:00
Daniel Kraft
6326147d6f
Make reply below quote opt-in.
...
Add a new preference for 'reply below quote' and only use the new
quoting style if it is set.
2014-01-28 20:57:01 +01:00
Daniel Kraft
5c1e1206ef
Use patch for email-like quoting with '>' chars.
...
Apply the patch from https://github.com/Bitmessage/PyBitmessage/pull/271
for email-like "reply below text" with '>' quoting. The patch is
slightly modified compared to the referenced pull request.
2014-01-28 20:38:54 +01:00
Yuri
eb2a82295a
Corrected Russian translation.
2014-01-24 20:14:51 -08:00
flaskevann
bbed86921b
Major update of bitmessage_no.ts
...
I considered this file to be done already and assumed that the huge amount of mixed english and norwegian inside the gui was somebodys elses fault. But after mocking about with Python the entire day I found that I was wrong. I couldn't even get the ts file to compile into a qm to begin with, but everything should be fine now.
2014-01-23 20:51:05 +01:00
Jonathan Warren
8c7031f56d
changed 2013 to 2014 in copyright notices
2014-01-21 22:41:48 -05:00
Jonathan Warren
917e27c19b
minor change to new function isOurOperatingSystemLimitedToHavingVeryFewHalfOpenConnections
2014-01-21 01:17:36 -05:00
Jonathan Warren
7983a14754
Increment version number to 0.4.2
2014-01-20 23:04:41 -05:00
Jonathan Warren
c98ca590a8
Fix #566
2014-01-20 15:25:02 -05:00
Jonathan Warren
89d778528a
changed the Chinese translation of 'Chinese' to the simplified version
2014-01-20 14:30:47 -05:00
Jonathan Warren
d72e9c1015
add missing import
2014-01-20 13:45:21 -05:00
Jonathan Warren
1dd9369400
Merge pull request #621 from flaskevann/patch-12
...
Update bitmessage_en_pirate.ts
2014-01-20 09:57:19 -08:00
Jonathan Warren
af99a12198
Merge pull request #620 from flaskevann/patch-11
...
Update bitmessage_de.ts
2014-01-20 09:57:14 -08:00
Jonathan Warren
7563496af0
Merge pull request #619 from flaskevann/patch-10
...
Update bitmessage_eo.ts
2014-01-20 09:57:10 -08:00
Jonathan Warren
0e92f1946e
Merge pull request #618 from flaskevann/patch-9
...
Update bitmessage_fr.ts
2014-01-20 09:57:05 -08:00
Jonathan Warren
e5451f8b59
Merge pull request #617 from flaskevann/patch-8
...
Update bitmessage_no.ts
2014-01-20 09:56:59 -08:00
Jonathan Warren
9d744f5c4f
Merge pull request #616 from flaskevann/patch-7
...
Update bitmessage_ru.ts
2014-01-20 09:56:48 -08:00
Jonathan Warren
90ee1d7df9
Merge pull request #615 from flaskevann/patch-6
...
Update bitmessage_zh_cn.ts
2014-01-20 09:56:42 -08:00
Jonathan Warren
bc94af3e52
Merge pull request #614 from flaskevann/patch-5
...
Update settings.ui
2014-01-20 09:56:36 -08:00
Jonathan Warren
9196fd0b35
Merge pull request #613 from flaskevann/patch-3
...
Update settings.py
2014-01-20 09:55:04 -08:00
Jonathan Warren
85a409636a
Fix #611 ; also swap print statements out for loggers
2014-01-16 20:10:04 -05:00
flaskevann
6866349b8c
Update bitmessage_en_pirate.ts
...
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:54:25 +01:00
flaskevann
68f30fc6ec
Update bitmessage_de.ts
...
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:53:50 +01:00
flaskevann
970e94616a
Update bitmessage_eo.ts
...
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:51:55 +01:00
flaskevann
1ceae047af
Update bitmessage_fr.ts
...
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:50:53 +01:00
flaskevann
01ebb9ff19
Update bitmessage_no.ts
...
Tiny change, only a comma less
2014-01-16 15:49:55 +01:00
flaskevann
231c32d282
Update bitmessage_ru.ts
...
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:43:22 +01:00
flaskevann
3f6b4b9289
Update bitmessage_zh_cn.ts
...
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:42:19 +01:00
flaskevann
8f784522c9
Update settings.ui
...
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:38:31 +01:00
flaskevann
020fb498ca
Update settings.py
...
Tiny tiny change: "norsk" -> "Norsk"
2014-01-16 15:37:07 +01:00
Jonathan Warren
d2138ba8e1
Added Chinese translation to settings options box
2014-01-12 20:24:30 -05:00
Jonathan Warren
5fb8f6eb57
Merge pull request #605 from Almehrezi/master
...
Arabic language translation
2014-01-12 17:06:21 -08:00
Jonathan Warren
c177308906
Merge pull request #598 from flaskevann/patch-4
...
Update bitmessage_no.ts
2014-01-12 17:01:10 -08:00
Jonathan Warren
0b81e9b206
rename bitmessageapi.py to api.py
2014-01-12 19:56:30 -05:00
Jonathan Warren
6af92a5e09
fix line which keeps user from running more than once Bitmessage instance
2014-01-12 19:50:44 -05:00
Jonathan Warren
d150476e98
Added comments and console output to expain that you cannot run bitmessageapi.py directly
2014-01-12 19:30:01 -05:00
Xiaokang Wang
9ebfd2a42f
Fixed mistake in Chinese translation
2014-01-07 19:22:40 +08:00
Xiaokang Wang
2a80c85634
Modifyed __init__.py in order to enum Chinese
2014-01-07 19:02:41 +08:00
Xiaokang Wang
952ce2cb3c
Fixed mistake in Chinese translation
2014-01-07 18:46:14 +08:00
Xiaokang Wang
e11290f652
Fixed mistake in Chinese transltion
2014-01-07 11:35:40 +08:00
Xiaokang Wang
271c20e607
Created project file
2014-01-07 11:11:10 +08:00
Xiaokang Wang
b9da1aa33f
Released Chinese(CHS) translation
2014-01-07 11:07:39 +08:00
Xiaokang Wang
d96b03e40e
Finished Chinese(CHS) translation
2014-01-07 11:02:50 +08:00
Abdulla Almehrezi
075541347d
Arabic language translation
2014-01-07 00:28:42 +04:00
flaskevann
40a727ebd2
Update bitmessage_no.ts
...
Fixed all the special chars and translated the new lines at the bottom.
2014-01-03 21:19:27 +01:00
Eino Mäkitalo
baf634f89b
Merge with original upstream changes
...
Conflicts:
src/bitmessagemain.py
2013-12-30 10:55:06 +02:00
Jonathan Warren
a756e4459d
Merge pull request #595 from Atheros1/master
...
fix #590
2013-12-29 19:38:38 -08:00
Jonathan Warren
61389b64aa
fix #590
2013-12-29 22:36:23 -05:00
Eino Mäkitalo
a7b4d36bdc
Merge branch 'master' of https://github.com/eino-makitalo/PyBitmessage.git
...
Conflicts:
src/bitmessageapi.py
2013-12-30 02:57:30 +02:00
Eino Mäkitalo
b0c582605f
Cleaning imports and separating API to another file. PyLint fixes for main file
2013-12-30 02:53:44 +02:00
Eino Mäkitalo
5fe54f9556
Cleaning imports and separating API to another file. PyLint fixes for main file
2013-12-30 02:49:27 +02:00
Jonathan Warren
08b92541c6
Merge pull request #588 from BioGeek/patch-1
...
remove duplicate code
2013-12-29 15:35:11 -08:00
Jonathan Warren
9fdff73ee1
simplify last commit
2013-12-25 01:48:01 -05:00
Jonathan Warren
3c00a443ae
added error handling to previous commit: populate 'from' combo box when replying
2013-12-25 01:30:39 -05:00
Jonathan Warren
519a0a4779
Merge branch 'populatefromfield' of git://github.com/bikash617/PyBitmessage into bikash617-populatefromfield
2013-12-25 01:05:56 -05:00
Jonathan Warren
534e98e816
Merge pull request #578 from b4tman/master
...
fix AppdataFolder encoding on windows
2013-12-24 21:53:41 -08:00
Jonathan Warren
2ca0fed227
fix error during fixing of merge conflict
2013-12-25 00:46:14 -05:00
Jonathan Warren
c18ee8e803
resolve merge conflict
2013-12-25 00:42:31 -05:00
Jonathan Warren
12adccf965
Merge pull request #576 from yurivict/tray_inbox_unread_indicator
...
[NEW FEATURE] Implemented the indicator in tray icon that there are unread messages
2013-12-24 21:31:49 -08:00
Jonathan Warren
99738e88aa
Merge pull request #574 from yurivict/compatibility_FreeBSD
...
FreeBSD compatibility
2013-12-15 21:58:45 -08:00
Jonathan Warren
a9bd322155
Merge pull request #571 from hanswolff/patch-1
...
fixed typos
2013-12-15 21:37:25 -08:00
Jonathan Warren
98ce6340e8
updated all translation .ts files
2013-12-16 00:32:46 -05:00
Jonathan Warren
a41a5b3390
added class_objectProcessor.py to the translation .pro files
2013-12-16 00:19:15 -05:00
Jonathan Warren
1a489691be
added Norwegian translation to UI
2013-12-16 00:15:07 -05:00
Jonathan Warren
eea51f878f
Merge pull request #562 from flaskevann/patch-2
...
Create bitmessage_no.pro
2013-12-15 20:45:41 -08:00
Jonathan Warren
2bc502e3a2
Merge pull request #561 from flaskevann/patch-1
...
Create bitmessage_no.ts
2013-12-15 20:45:31 -08:00
Jonathan Warren
2fc85d8b32
Merge pull request #560 from erwinvaneyk/patch-1
...
fix #558
2013-12-15 20:43:06 -08:00
Jeroen Van Goey
90b0d4c640
remove duplicate code
...
There was twice a check for the Python version on OSX, but the logging in the second check was never reached
2013-12-09 00:32:19 +01:00
Jeroen Van Goey
fb98cd0fc8
remove duplicate code
...
There was twice a check for the Python version on OSX but the logging in the second step could never be reached.
2013-12-09 00:25:07 +01:00
Jonathan Warren
80932bbab0
fix pubkey signature bug leftover from objectProcessorThread-related-changes
2013-12-06 01:52:19 -05:00
Jonathan Warren
df7116bd72
on close, save objectProcessorQueue to disk
2013-12-02 01:35:34 -05:00
bikash617
6d197e97b1
populate from field feature implementation
2013-12-01 13:23:34 +04:00
Jonathan Warren
3c79b7bf65
save the tag in the inventory for your own broadcasts also
2013-12-01 00:45:37 -05:00
Jonathan Warren
44618ffcc2
added option to show recent broadcasts when subscribing
2013-11-30 23:15:18 -05:00
Dmitry Belyaev
f1ce821910
fix AppdataFolder encoding on windows
2013-11-30 00:42:15 +04:00
Yuri
346582dcb5
Fixed grammar: 'Waiting on' -> 'Waiting for'
2013-11-28 17:52:05 -08:00
Yuri
ce1c9ca26a
Fixed grammar: 'Waiting on' -> 'Waiting for'
2013-11-28 17:51:07 -08:00
Yuri
42faf2aaa0
[NEW FEATURE] Implemented the indicator in tray icon that there are unread messages.
2013-11-28 17:05:53 -08:00
Yuri
7b65da70dc
FreeBSD compatibility.
2013-11-28 16:20:16 -08:00
Hans Wolff
01620ec868
fixed typos
...
"Verschlüsselungscode Anforderung" -> "Verschlüsselungscode-Anforderung"
"Kennowrtsatz" -> "Kennwortsatz"
2013-11-25 19:00:39 +00:00
Jonathan Warren
45a0046e7d
completed work on objectProcessorThread
2013-11-20 01:29:37 -05:00
flaskevann
a1e67da794
Create bitmessage_no.pro
...
A simple .pro file like the other languages have, with correct name for the norwegian translation file.
(I guess the .qm file also is needed, but I could not make heads or tails of it)
2013-11-17 08:07:41 +01:00
flaskevann
380a8e717e
Create bitmessage_no.ts
...
Norwegian translation for Bitmessage.
Everything is translated, including the "unfinished" and "obsolete" parts (better safe then sorry).
(I used the french files as template)
2013-11-16 05:01:02 +01:00
Erwin van Eyk
be6b3961b7
fix #558
2013-11-15 16:29:11 +01:00
Jonathan Warren
b3ba1aed68
some initial objectProcessorThread work
2013-11-13 22:45:10 -05:00
Jonathan Warren
2a1b6dd86d
some initial objectProcessorThread work
2013-11-13 22:44:42 -05:00
Jonathan Warren
90fd189fa8
minor style changes to previous commit
2013-11-07 16:44:08 -05:00
neko259
7a2115b889
Refactoring main qt module. Moved popup menus initialization to separate methods, simplified inbox loading and moved magic strings to the model scope constants so they won't be created every time.
2013-11-07 21:35:11 +02:00
Jonathan Warren
47e533f93c
Merge pull request #547 from neko259/master
...
Refactored some table items to remove the universal unreadable variable ...
2013-11-07 11:08:48 -08:00
Jonathan Warren
d150193f43
Fix #545
2013-11-06 23:51:42 -05:00
Jonathan Warren
74c7c99511
Fix #544
2013-11-06 23:41:37 -05:00
Jonathan Warren
d34114d14c
Fix #541
2013-11-06 23:38:19 -05:00
Jonathan Warren
7a7385496e
Fix #472
2013-11-06 23:03:36 -05:00
Jonathan Warren
b3f0fd981f
delete class_sqlThread.py.orig
2013-11-05 23:42:16 -05:00
Jonathan Warren
c490f63170
further work on 'messages expire' feature
2013-11-05 23:22:51 -05:00
neko259
c0f9531665
Refactored some table items to remove the universal unreadable variable 'new_item'
2013-11-05 23:36:15 +02:00
Jonathan Warren
bd2803bebc
various changes to 'messages expire' pull request
2013-11-04 02:05:07 -05:00
Jonathan Warren
e5fce78fc3
revert settings window as close as possible to previous size
2013-11-02 18:05:39 -04:00
Jonathan Warren
3b41eafa7b
revert main window to previous size
2013-11-02 18:01:36 -04:00
Jonathan Warren
389be42668
Merge branch 'master' of github.com:Atheros1/PyBitmessage
2013-11-02 17:36:01 -04:00
Jonathan Warren
162114ab28
load Sent To label from subscriptions if available
2013-11-02 17:34:46 -04:00
Jonathan Warren
f4fd5fd5bd
Improve verbage in UI
2013-11-02 00:19:54 -04:00
Jonathan Warren
a4b5ded803
we no longer need to add chans to our address book
2013-11-02 00:02:46 -04:00
Jonathan Warren
6abb589f01
Merge branch 'master' of github.com:Atheros1/PyBitmessage
2013-11-01 20:56:50 -04:00
Jonathan Warren
a9898feab8
removed images/can-icon-24px_2.png
2013-11-01 19:28:44 -04:00
Jonathan Warren
f7ef2b4e05
various changes to Identicon code
2013-11-01 19:25:24 -04:00
Jonathan Warren
753155aa86
Merge branch 'feature/Identicons' of git://github.com/sendiulo/PyBitmessage into sendiulo-feature/Identicons
2013-10-30 15:56:22 -04:00
Jonathan Warren
41c3b73343
comment
2013-10-26 18:49:22 -04:00
Jonathan Warren
9dd674a117
Merge pull request #535 from Atheros1/master
...
API commands: createChan, joinChan, leaveChan, deleteAddress
2013-10-25 16:59:24 -07:00
Jonathan Warren
4ec91b6ed0
modified addresses.decodeAddress so that API decodeAddress works properly
2013-10-25 19:57:06 -04:00
Jonathan Warren
12edee4ac4
added API commands: createChan, joinChan, leaveChan, deleteAddress
2013-10-25 19:35:59 -04:00
Jonathan Warren
19eb77fb4f
Merge branch 'master' of git://github.com/Eylrid/PyBitmessage into Eylrid-master
2013-10-25 17:46:33 -04:00
Jonathan Warren
240df6f5bb
Merge pull request #534 from Atheros1/master
...
More informative "message truncated" text
2013-10-25 14:45:22 -07:00
Jonathan Warren
3649010b34
resolve merge conflict
2013-10-25 17:42:47 -04:00
Peter
f6cdc0844b
Merge remote-tracking branch 'upstream/master'
2013-10-20 16:41:53 +04:00
Jonathan Warren
1cf7d36d81
Merge pull request #532 from Atheros1/master
...
Don't store inbox & sent message data in memory
2013-10-19 15:42:00 -07:00
Jonathan Warren
7a30db75f1
Use SQL-stored message when using 'Display as HTML' feature
2013-10-16 01:08:22 -04:00
Jonathan Warren
24452cddb2
check return value of RAND_bytes
2013-10-13 14:08:12 -04:00
Jonathan Warren
55568fa242
Don't store messages in UI table (and thus in memory), pull from SQL inventory as needed
2013-10-13 13:45:30 -04:00
Peter
32ce94e34f
Merge remote-tracking branch 'upstream/master'
2013-10-13 13:05:00 +04:00
Joshua Noble
ed0a57d998
Fixed typo in getInboxMessagesByAddress
2013-10-12 00:33:19 -04:00
Peter
21c012b8d6
Merge remote-tracking branch 'upstream/master'
2013-10-10 17:13:43 +04:00
ikarakatsanis
9066dad5e3
AQWA feature: UI setting for Bitmessage to stop trying to send messages after X hours/days/months
2013-10-10 09:10:46 +04:00
John Kozan
6787e4b932
== should be =
2013-10-06 22:04:09 -06:00
ikarakatsanis
44bd876a40
feature1_v4
2013-10-06 12:32:14 +04:00
Jonathan Warren
5ca93907f1
Merge pull request #522 from Atheros1/master
...
Bug fixes
2013-10-05 10:43:22 -07:00
Jonathan Warren
a20711c2ab
Fix whitelist functionality
2013-10-05 13:39:53 -04:00
Jonathan Warren
f6b9c234f7
pull translations properly when running from Windows EXE
2013-10-05 12:23:34 -04:00
Peter
5fb08efe00
merged
2013-10-03 19:39:27 +04:00
ikarakatsanis
c16d9787d2
feature1_v3_AQWA
2013-10-03 18:29:50 +04:00
Jonathan Warren
691ee5d3a7
Merge pull request #521 from Atheros1/master
...
Fix DevTalk discussion issue: sent message has wrong status (doesn't / d...
2013-10-01 19:47:54 -07:00
Jonathan Warren
ff8a88422c
Fix DevTalk discussion issue: sent message has wrong status (doesn't / does expect ack)
2013-10-01 22:44:00 -04:00
ikarakatsanis
511185055d
feature_v2
2013-10-02 04:16:42 +04:00
ikarakatsanis
d487b522cf
feature_v1
2013-10-02 04:14:53 +04:00
Jonathan Warren
4d578c2b63
Merge pull request #516 from fuzzgun/master
...
Changelog update for 0.4.0
2013-09-29 23:12:42 -07:00
Jonathan Warren
235e257e81
Merge pull request #515 from grant-olson/translations_in_dmg
...
Translations in dmg
2013-09-29 22:27:44 -07:00
Jonathan Warren
8d5fad8e1f
Merge pull request #498 from niklasf/master
...
Fix German translation of max difficulty tab
2013-09-29 22:27:04 -07:00
Jonathan Warren
f5b92b2fa5
turn timing attack mitigation back on
2013-09-29 23:06:24 -04:00
Jonathan Warren
9e34caebef
increment version number to 0.4.1
2013-09-29 23:05:06 -04:00
Jonathan Warren
79dc462b1e
Chan fix: completed
2013-09-29 23:01:56 -04:00
Jonathan Warren
498928405b
Chan fix: initial work completed
2013-09-29 19:24:27 -04:00
fuzzgun
b37e0ec027
Changelog update for 0.4.0
2013-09-28 13:09:15 +01:00
ikarakatsanis
e1fc820226
changes in keys.dat, edit hours/days/months is working now, variable time_period inserted
2013-09-28 04:47:16 +04:00
Grant T. Olson
497c297020
Include translation resources
2013-09-27 10:28:40 -04:00
ikarakatsanis
ae01c186f4
minor change UI
2013-09-27 02:24:48 +04:00
ikarakatsanis
234081cc17
New tab "Adjusting time period for resending messages" was added
2013-09-27 02:14:24 +04:00
ikarakatsanis
2293253d38
test to check git usage
2013-09-26 16:21:11 +04:00
amos
379d27b5d8
update address versions in addChan
2013-09-23 23:00:50 -07:00
amos
000fe293d6
Merge branch 'decodeAddress2'
...
Conflicts:
src/bitmessagemain.py
2013-09-23 22:39:40 -07:00
amos
e878fb4c96
Add api method decodeAddress
...
Add decodeAddress as an api call. Like the addresses.decodeAddress function
it return status, addressVersion, streamNumber, and ripe. ripe is base64
encoded.
2013-09-23 22:37:50 -07:00
Jonathan Warren
7e07d7bc7e
_verifyAddress support v4 addresses
2013-09-24 00:55:13 -04:00
amos
8a3028e7c1
Merge branch 'fixApi'
2013-09-23 21:26:30 -07:00
amos
cdf4d5d75c
Change the accepted address versions
...
Update _verifyAddress to accept version 4.
2013-09-23 21:19:02 -07:00
amos
250f36b670
Merge branch 'master' of https://github.com/Bitmessage/PyBitmessage
2013-09-23 20:00:22 -07:00
Jonathan Warren
4fea165d50
Increment version number to v0.4.0
2013-09-22 23:29:30 -04:00
Jonathan Warren
6081863b28
raise default demanded difficulty from 1 to 2
2013-09-22 23:12:21 -04:00
Jonathan Warren
ef500501d7
small fixes to address generator and listAddresses2
2013-09-21 13:30:46 -04:00
sendiulo
21005fb0a8
- add the settings also for old users
2013-09-21 17:06:54 +02:00
sendiulo
aed489a2bc
Merge branch 'upstream/master'
...
Conflicts:
src/bitmessageqt/__init__.py
src/bitmessageqt/bitmessageui.py
src/bitmessageqt/settings.py
src/bitmessageqt/settings.ui
src/helper_startup.py
2013-09-21 16:24:14 +02:00
sendiulo
cd2c55dd2d
removed bug: sent icon wrongly put into column 0 instead of 1
2013-09-21 14:49:30 +02:00
sendiulo
d6bd2b3938
- GUI settings done
2013-09-21 14:31:47 +02:00
sendiulo
a58164d831
- additional identicon type "empty" if you want to have a placeholder
...
- place image named 'default.*' to display a generic user icon as fallback
- place image named '[Broadcast Subscribers].*' to set the icon for broadcasts
2013-09-21 13:21:36 +02:00
sendiulo
9a1226ba37
- "set avatar" via context menu
...
- remove avatar by canceling "set avatar"
- get FROM address labels also from YourIdentities
2013-09-21 09:41:23 +02:00
sendiulo
c1cbdc1b99
load avatar from file
2013-09-20 14:30:53 +02:00
Jonathan Warren
a147c38ab6
ignore eighteenByteRipe value if user specified numberofnullbytesonaddress in keys.dat file
2013-09-19 22:27:01 -04:00
sendiulo
31affd438f
avatarize
2013-09-19 21:28:22 +02:00
sendiulo
86485a9b09
nonfunctional identicon settings-GUI
2013-09-18 17:39:45 +02:00
Jonathan Warren
02ea2a50d3
more v4 address work. Should be done.
2013-09-18 00:04:01 -04:00
sendiulo
0959c9c07c
...
2013-09-17 10:55:26 +02:00
sendiulo
240e9b5b58
Updated to work with QPixmap instead of PIL!
...
The original source is licensed under a BSD-License, so it should be fine to use.
2013-09-16 21:08:55 +02:00
Jonathan Warren
79f6169803
further v4 address work
2013-09-14 21:06:26 -04:00
Jonathan Warren
56168e82b5
most initial work on v4 pubkeys completed
2013-09-13 00:27:34 -04:00
Amos Bairn
40033d9e87
add api method addChan
...
This solves issue #484
2013-09-11 23:04:16 -07:00
Niklas Fiekas
c1a7356e1a
Fix German translation of max difficulty tab
2013-09-11 22:20:07 +02:00
Gergö Barany
4765705764
More informative "message truncated" text that tells users what to do to
...
view the full message.
2013-09-11 12:18:13 +02:00
Jonathan Warren
33ea666df7
Merge pull request #494 from Atheros1/master
...
Smarter advertisement of object hashes and peers
2013-09-09 17:29:20 -07:00
Jonathan Warren
90e60d8145
delay addr messages random number of seconds
2013-09-09 19:26:32 -04:00
Jonathan Warren
f8454de37a
Merge pull request #491 from grant-olson/check_readstatus_before_update
...
Only UPDATE readStatus if it changed
2013-09-07 15:27:34 -07:00
Jonathan Warren
f0bf3aad48
use locks when accessing dictionary inventory
2013-09-07 18:23:20 -04:00
Grant T. Olson
34203d73dd
Only UPDATE readStatus if it changed
2013-09-07 13:35:10 -04:00
bitnukl
5d64919e1f
resized main window to fit translations without scrolling
...
Now all translations fit in wothout scrolling (tested de, eo, fr and ru)
2013-09-07 10:54:26 +00:00
bitnukl
8042763956
translation updated
2013-09-07 10:46:23 +00:00
Jonathan Warren
831edf0d24
completed inv refactorization
2013-09-06 21:47:54 -04:00
Jonathan Warren
2725281a6d
initial testing inv refactorization
2013-09-06 18:58:56 -04:00
Jonathan Warren
a9b15f83ba
initial testing inv refactorization
2013-09-06 18:55:12 -04:00
Jonathan Warren
477568f501
changed API commands which modify and list the address book per discussion in #482
2013-09-06 15:06:29 -04:00
Jonathan Warren
0058433b96
Merge pull request #488 from Atheros1/master
...
fixed #486
2013-09-06 10:42:34 -07:00
Jonathan Warren
7181da5dd6
fixed #486
2013-09-06 13:41:24 -04:00
Jonathan Warren
08024748b0
Merge pull request #482 from grant-olson/add_delete_addressbook
...
addAddressBook and deleteAddressBook API calls
2013-09-05 11:06:06 -07:00
Grant T. Olson
bfd79e0ae1
Use same argument order as addSubscription for addAddressBook
2013-09-05 06:42:12 -04:00
Grant T. Olson
db81f0c11e
Add add/deleteAddressBook APIs, extract address verification into reuable code, and make some QT stuff re-renderable
2013-09-05 06:31:52 -04:00
Jonathan Warren
c8b727e82b
Merge pull request #480 from grant-olson/chan_in_listAddress
...
Add chan true/false to listAddresses results
2013-09-04 17:20:49 -07:00
Jonathan Warren
4f9dc9d720
Merge pull request #481 from Atheros1/master
...
Various improvements
2013-09-04 17:19:00 -07:00
Jonathan Warren
c06bbc14f8
Give user feedback when disk is full
2013-09-04 20:14:25 -04:00
Grant T. Olson
48a3bdfefc
Add chan true/false to listAddresses results
2013-09-04 19:25:44 -04:00
Jonathan Warren
9283ce8776
When replying using chan address, send to whole chan not just sender
2013-09-04 17:33:39 -04:00
Jonathan Warren
2fcc6916c6
Merge pull request #479 from Atheros1/master
...
modifications to API commands used by mobile device
2013-09-04 13:55:18 -07:00
Jonathan Warren
1bbb8240ed
modifications to API commands used by mobile device
2013-09-04 16:51:19 -04:00
Jonathan Warren
99ef546a0a
Merge pull request #477 from fanquake/build_osx-version
...
Correct version number in build_osx.py
2013-09-04 09:59:50 -07:00
Jonathan Warren
7ccdd14418
fix #474
2013-09-04 12:53:18 -04:00
sendiulo
a9fb87173f
now it should also work with the other identicon file
2013-09-04 13:45:23 +02:00
Michael Ford
36af1b528d
Correct version number in build_osx.py
2013-09-04 19:31:50 +08:00
Jonathan Warren
eff4edb8e8
Merge pull request #471 from Eylrid/master
...
Restore "import shared" to helper_inbox
2013-09-03 22:10:00 -07:00
Jonathan Warren
5fab298559
Refactor of the way PyBitmessage looks for interesting new objects in huge inv messages from peers
2013-09-03 22:45:45 -04:00
Jonathan Warren
6159d5e622
Show inventory lookup rate on Network Status tab
2013-09-03 18:08:29 -04:00
Amos Bairn
f9d2a39c3d
Restore "import shared" to helper_inbox
...
Commit 5b23d9 removed the line "import shared" from helper_inbox. Almost
all of what shared was used for became covered by helper_sql. But, shared
still needs to be imported because there is still one line that uses
shared:
9: shared.UISignalQueue.put(('removeInboxRowByMsgid',msgid))
2013-09-03 12:56:07 -07:00
Jonathan Warren
3ca4578f7f
minor changes to previous commit- adding listAddressBook to API
2013-09-03 00:30:48 -04:00
Jonathan Warren
cf52d93a67
Merge branch 'master' of git://github.com/Eylrid/PyBitmessage into Eylrid-master
2013-09-03 00:26:43 -04:00
Jonathan Warren
e214f0bb66
Added ability to set a message's read status using getInboxMessageID. This rather than #368
2013-09-03 00:20:30 -04:00
Jonathan Warren
f64461feb0
fixes to new SQL refactoring
2013-09-02 23:14:43 -04:00
Jonathan Warren
ea3cf9e00e
minor changes to previous commit
2013-09-02 18:24:22 -04:00
Jonathan Warren
95c1dbda5a
Merge branch 'sql_refactor' of git://github.com/grant-olson/PyBitmessage into grant-olson-sql_refactor
2013-09-02 17:30:06 -04:00
Jonathan Warren
9774cd2a5c
fix #464
2013-09-02 16:51:32 -04:00
Grant T. Olson
8d8e43b1fc
Added SqlBulkExecute class so we can update inventory without a million commits
2013-08-31 10:40:11 -04:00
Grant T. Olson
b83781cefb
Merge remote-tracking branch 'upstream/master' into sql_refactor
2013-08-30 17:59:35 -04:00
Jonathan Warren
95cf453de4
resolve merge conflict
2013-08-30 13:26:55 -04:00
sendiulo
9b28e1932d
quoted out the BSD licensed code (as i didn't get it to work properly yet)
2013-08-30 09:02:49 +02:00
Grant T. Olson
5eba4e6442
Merge branch 'master' into Fast_PoW_unless_frozen
2013-08-29 11:42:10 -04:00
Grant T. Olson
2165157c6e
Fixed regression in adding to address book
2013-08-29 11:16:59 -04:00
Grant T. Olson
8a6d1d9cd5
Fix regression where I couldn't add a subscription
2013-08-29 10:02:42 -04:00
Grant T. Olson
03ce8ba8fb
new API method needs to use helper_sql
2013-08-29 08:47:27 -04:00
Grant T. Olson
b5873187bf
Merge branch 'master' into sql_refactor
2013-08-29 08:45:45 -04:00
Grant T. Olson
7499de4e13
have shared.py use helper_sql and move the sql queues and locks to helper_sql
2013-08-29 08:03:45 -04:00
Grant T. Olson
92c1368691
use helper_sql in class_receiveDataThread
2013-08-29 08:03:05 -04:00
Grant T. Olson
1fb11495a6
use helper_sql in class_singleWorker
2013-08-29 07:28:11 -04:00
Grant T. Olson
d879e35e26
use helper_sql for helper_sent
2013-08-29 07:27:09 -04:00
Jonathan Warren
da50d0c0d3
Merge pull request #453 from acejam/master
...
Added trashSentMessageByAckData API command
2013-08-28 19:10:14 -07:00
sendiulo
07b67051c9
Identicons now in new messages and in the From combobox.
...
[Broadcast Subscribers] gets the Bitmessage Icon for identification. This is hard-coded now, I would favour to put [Broadcast Subscribers] as a fixed item into the Address Book, so you can set an avatar as soon as i implement avatars.
Still no options yet: There will be an option to disable Identicons and Avatars separately. Another option will be for the suffix (to mimic adresses like "BM-...@bitmessage.ch" or to add a personal "salt" to prevent identicon attacks where someone creates an address with an identicon that looks alike the one of a known address). Also, identicon size (coupled with row height) should be available, but is of low priority.
Next step (after the settings) is to load specific avatars for each address.
2013-08-28 16:50:46 +02:00
Grant T. Olson
8b750be136
Merge branch 'master' into sql_refactor
2013-08-28 10:44:39 -04:00
akh81
6b9914fe46
updated Russian translations
2013-08-28 04:50:52 -05:00
akh81
e8cd025b18
updated Russian translations
2013-08-28 04:45:35 -05:00
Jonathan Warren
ef43248752
Merge pull request #438 from rspeed/master
...
Fix OS X package building
2013-08-27 19:48:18 -07:00
Jonathan Warren
83ffab9e4a
manually merge #431
2013-08-27 22:38:32 -04:00
Jonathan Warren
0d5f2680d4
various modifications to previous commit regarding ability to select language
2013-08-27 22:29:39 -04:00
Jonathan Warren
aea1d41bf8
Merge branch 'master' of git://github.com/sendiulo/PyBitmessage into sendiulo-master
2013-08-27 21:11:40 -04:00
Jonathan Warren
07a679bdd1
Merge pull request #421 from tvwerkhoven/master
...
Use 'inf' as large value instead of 1e20
2013-08-27 18:06:33 -07:00
Jonathan Warren
4d2ab28b8d
Merge pull request #411 from UnderSampled/master
...
Simple Inbox and Sent Preview box enhancements
2013-08-27 18:05:06 -07:00
Grant T. Olson
9e8cbd0f0e
class_singleCleaner uses helper_sql
2013-08-27 10:00:26 -04:00
Grant T. Olson
5b23d99907
Have helper_inbox use helper_sql
2013-08-27 10:00:26 -04:00
Grant T. Olson
7a53d2950b
Have bitmessageqt use sql helpers
2013-08-27 09:55:37 -04:00
Grant T. Olson
74cd6c24b2
Have API calls use sql helper
2013-08-27 09:55:37 -04:00
Grant T. Olson
edf9101eae
Move duplicated sql code into helper
2013-08-27 09:55:36 -04:00
sendiulo
6c20d83edc
Merge branch 'upstream/master'
...
Conflicts:
src/helper_startup.py
2013-08-27 12:10:46 +02:00
sendiulo
deeac2c99b
Identicons working in most lists, but not working for new items yet.
...
There are no settings yet.
2013-08-27 11:47:14 +02:00
Joshua Noble
b5f42d7549
Added trashSentMessageByAckData API command
2013-08-26 22:29:57 -04:00
Jonathan Warren
0ca9ba9dc1
Merge branch 'master' of github.com:Atheros1/PyBitmessage
2013-08-26 15:27:51 -04:00
Jonathan Warren
1bb86794a8
undid support for receiving v4 addresses until more chanages are implemented
2013-08-26 15:23:12 -04:00
